using propper labconfig.yaml so that it will match the other labs.

Also mofiied the deployment.yaml to generate the IP address of
admin bridge ip.
Enable novnc console access for instances.

Change-Id: I874831c3769b098182eccc83f841fc0a92ad5a37
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>

1 files changed, 48 insertions, 145 deletions

diff --git a/labconfig/default/labconfig.yaml b/labconfig/default/labconfig.yaml
index ee35f651..1e981d88 100644
--- a/labconfig/default/labconfig.yaml
+++ b/labconfig/default/labconfig.yaml
@@ -1,145 +1,48 @@
-demo-maas:
-    # Contains the virtual machine parameters for creating the Juju bootstrap
-    # node virtual machine
-    juju-bootstrap:
-        name: bootstrap
-        interfaces: ['bridge=virbr0,model=virtio']
-        memory: 2048
-        vcpus: 2
-        arch: amd64
-        pool: default
-        disk_size: 20G
-#        sticky_ip_address:
-#            requested_address: 192.168.122.25
-
-    maas:
-        # Defines the general setup for the MAAS environment, including the
-        # username and password for the host as well as the MAAS server.
-        user: ubuntu
-        password: ubuntu
-
-        # Contains the virtual machine parameters for creating the MAAS virtual
-        # server. Here you can configure the name of the virsh domain, the
-        # parameters for how the network is attached.
-        name: opnfv-maas
-        interfaces: ['bridge=virbr0,model=virtio']
-        memory: 4096
-        vcpus: 2
-        arch: amd64
-        pool: default
-        disk_size: 60G
-        release: trusty
-
-        # Apt http proxy setting(s)
-        apt_http_proxy:
-
-        apt_sources:
-          - ppa:maas/stable
-          - ppa:juju/stable
-
-        boot_source:
-            url: http://maas.ubuntu.com/images/ephemeral-v2/releases/
-            keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg
-            selections:
-                1:
-                    release: xenial
-                    os: ubuntu
-                    arches: amd64
-                    subarches: "*"
-                    labels: release
-        # Virsh power settings
-        # Specifies the uri and keys to use for virsh power control of the 
-        # juju virtual machine. If the uri is omitted, the value for the
-        # --remote is used. If no power settings are desired, then do not
-        # supply the virsh block.
-        virsh:
-            rsa_priv_key: /home/ubuntu/.ssh/id_rsa
-            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
-            uri: qemu+ssh://ubuntu@192.168.122.1/system
-
-        # Defines the IP Address that the configuration script will use to
-        # to access the MAAS controller via SSH.
-        ip_address: 192.168.122.1
-
-        # This section allows the user to set a series of options on the
-        # MAAS server itself. The list of config options can be found in
-        # the upstream MAAS documentation:
-        #  - http://maas.ubuntu.com/docs/api.html#maas-server
-        settings:
-            main_archive: http://us.archive.ubuntu.com/ubuntu
-            upstream_dns: 192.168.122.1
-            maas_name: automaas
-            # kernel_opts: "console=tty0 console=ttyS1,115200n8"
-            ntp_server: ntp.ubuntu.com
-
-        # This section is used to define the networking parameters for when
-        # the node first comes up. It is fed into the meta-data cloud-init
-        # configuration and is used to configure the networking piece of the
-        # service. The contents of this section are written directly to the
-        # /etc/network/interfaces file.
-        #
-        # Please note, this is slightly different than the
-        # node-group-interfaces section below. This will configure the
-        # machine's networking params, and the node-group-interfaces will
-        # configure the maas node-group interfaces which is used for
-        # controlling the dhcp, dns, etc.
-        network_config: |
-            auto lo
-            iface lo inet loopback
-
-            auto eth0
-            iface eth0 inet static
-              address 192.168.122.2
-              netmask 255.255.255.0
-              network 192.168.122.0
-              broadcast 192.168.122.255
-              gateway 192.168.122.1
-              dns-nameservers 192.168.122.1 127.0.0.1
-
-        # See https://maas.ubuntu.com/docs/maascli.html#node-groups for
-        # description and full list of supported options.
-        # NOTE: interfaces are added using the node_group_interfaces section
-        #       and only one node_group can be created by this bundle.
-        #       Additional node groups can be added post deployment.
-        #node_group:
-        #    # This is the cluster DNS name.
-        #    name: maas
-
-        # The node-group-interfaces section is used to configure the MAAS
-        # network interfaces. Basic configuration is supported, such as which
-        # device should be bound, the range of IP addresses, etc.
-        # Note: this may contain the special identifiers:
-        #   ${maas_net} - the first 3 octets of the ipv4 address
-        #   ${maas_ip} - the ip address of the MAAS controller 
-        node_group_ifaces:
-            - device: eth0
-              ip: 192.168.122.2
-              subnet_mask: 255.255.255.0
-              broadcast_ip: 192.168.122.255
-              router_ip: 192.168.122.1
-              static_range:
-                  low: 192.168.122.101
-                  high: 192.168.122.200
-              dynamic_range:
-                  low: 192.168.122.25
-                  high: 192.168.122.100
-
-        # Physical nodes to be added to the MAAS cluster. Nodes will be
-        # configured, commissioned and put into the Ready state so
-        # they are ready to be deployed to.
-        #nodes:
-        #    - name: node1
-        #      tags: api
-        #      architecture: amd64/generic
-        #      mac_addresses:
-        #          - "38:63:bb:43:b8:9c"
-        #      power:
-        #          type: ipmi
-        #          address: 10.0.1.1
-        #          user: maas
-        #          pass: passw0rd
-        #          driver: LAN_2_0
-        #      sticky_ip_address:
-        #          mac_address: "38:63:bb:43:b8:9c"
-        #          requested_address: 192.168.122.6
-
+lab:
+  location: virtual
+  racks:
+  - rack: pod1
+    nodes:
+    - name: rack-vir-m1
+      architecture: x86_64
+      roles: [network,control]
+      nics:
+      - ifname: eth0
+      - ifname: eth1
+    - name: rack-vir-m2
+      architecture: x86_64
+      roles: [compute,control,storage]
+      nics:
+      - ifname: eth0
+      - ifname: eth1
+    - name: rack-vir-m3
+      architecture: x86_64
+      roles: [compute,control,storage]
+      nics:
+      - ifname: eth1
+      - ifname: eth4
+    floating-ip-range: 192.168.122.31,192.168.122.49,192.168.122.1,192.168.122.0/24
+    ext-port: "eth1"
+    dns: 8.8.8.8
+opnfv:
+  release: d
+  distro: xenial
+  type: nonha
+  openstack: newton
+  sdncontroller:
+  - type: nosdn
+  storage:
+  - type: ceph
+    disk: /srv
+  feature: odl_l2
+  spaces:
+  - type: admin
+    bridge: brAdm
+    cidr: 192.168.122.0/24
+    gateway: 192.168.122.1
+    vlan:
+  - type: public
+    bridge: brPublic
+    cidr: 192.168.122.0/24
+    gateway: 192.168.122.1
+    vlan: