modified all intel lab labconfig

Change-Id: I79a80255cac4355bc1ec39348e31913c748f9fcc
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>

1 files changed, 147 insertions, 0 deletions

diff --git a/labconfig/default/deployment.yaml b/labconfig/default/deployment.yaml
new file mode 100644
index 00000000..dacd5879
--- /dev/null
+++ b/labconfig/default/deployment.yaml
@@ -0,0 +1,147 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+demo-maas:
+    # Contains the virtual machine parameters for creating the Juju bootstrap
+    # node virtual machine
+    juju-bootstrap:
+        name: bootstrap
+        interfaces: ['bridge=virbr0,model=virtio']
+        memory: 2048
+        vcpus: 2
+        arch: amd64
+        pool: default
+        disk_size: 20G
+#        sticky_ip_address:
+#            requested_address: 192.168.122.25
+
+    maas:
+        # Defines the general setup for the MAAS environment, including the
+        # username and password for the host as well as the MAAS server.
+        user: ubuntu
+        password: ubuntu
+
+        # Contains the virtual machine parameters for creating the MAAS virtual
+        # server. Here you can configure the name of the virsh domain, the
+        # parameters for how the network is attached.
+        name: opnfv-maas
+        interfaces: ['bridge=virbr0,model=virtio']
+        memory: 4096
+        vcpus: 2
+        arch: amd64
+        pool: default
+        disk_size: 60G
+        release: trusty
+
+        # Apt http proxy setting(s)
+        apt_http_proxy:
+
+        apt_sources:
+          - ppa:maas/stable
+          - ppa:juju/stable
+
+        boot_source:
+            url: http://maas.ubuntu.com/images/ephemeral-v2/releases/
+            keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg
+            selections:
+                1:
+                    release: xenial
+                    os: ubuntu
+                    arches: amd64
+                    subarches: "*"
+                    labels: release
+        # Virsh power settings
+        # Specifies the uri and keys to use for virsh power control of the 
+        # juju virtual machine. If the uri is omitted, the value for the
+        # --remote is used. If no power settings are desired, then do not
+        # supply the virsh block.
+        virsh:
+            rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+            uri: qemu+ssh://ubuntu@192.168.122.1/system
+
+        # Defines the IP Address that the configuration script will use to
+        # to access the MAAS controller via SSH.
+        ip_address: 192.168.122.2
+
+        # This section allows the user to set a series of options on the
+        # MAAS server itself. The list of config options can be found in
+        # the upstream MAAS documentation:
+        #  - http://maas.ubuntu.com/docs/api.html#maas-server
+        settings:
+            main_archive: http://us.archive.ubuntu.com/ubuntu
+            upstream_dns: 192.168.122.1
+            maas_name: automaas
+            # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+            ntp_server: ntp.ubuntu.com
+
+        # This section is used to define the networking parameters for when
+        # the node first comes up. It is fed into the meta-data cloud-init
+        # configuration and is used to configure the networking piece of the
+        # service. The contents of this section are written directly to the
+        # /etc/network/interfaces file.
+        #
+        # Please note, this is slightly different than the
+        # node-group-interfaces section below. This will configure the
+        # machine's networking params, and the node-group-interfaces will
+        # configure the maas node-group interfaces which is used for
+        # controlling the dhcp, dns, etc.
+        network_config: |
+            auto lo
+            iface lo inet loopback
+
+            auto eth0
+            iface eth0 inet static
+              address 192.168.122.2
+              netmask 255.255.255.0
+              network 192.168.122.0
+              broadcast 192.168.122.255
+              gateway 192.168.122.1
+              dns-nameservers 192.168.122.1 127.0.0.1
+
+        # See https://maas.ubuntu.com/docs/maascli.html#node-groups for
+        # description and full list of supported options.
+        # NOTE: interfaces are added using the node_group_interfaces section
+        #       and only one node_group can be created by this bundle.
+        #       Additional node groups can be added post deployment.
+        #node_group:
+        #    # This is the cluster DNS name.
+        #    name: maas
+
+        # The node-group-interfaces section is used to configure the MAAS
+        # network interfaces. Basic configuration is supported, such as which
+        # device should be bound, the range of IP addresses, etc.
+        # Note: this may contain the special identifiers:
+        #   ${maas_net} - the first 3 octets of the ipv4 address
+        #   ${maas_ip} - the ip address of the MAAS controller 
+        node_group_ifaces:
+            - device: eth0
+              ip: 192.168.122.2
+              subnet_mask: 255.255.255.0
+              broadcast_ip: 192.168.122.255
+              router_ip: 192.168.122.1
+              static_range:
+                  low: 192.168.122.101
+                  high: 192.168.122.200
+              dynamic_range:
+                  low: 192.168.122.25
+                  high: 192.168.122.100
+
+        # Physical nodes to be added to the MAAS cluster. Nodes will be
+        # configured, commissioned and put into the Ready state so
+        # they are ready to be deployed to.
+        #nodes:
+        #    - name: node1
+        #      tags: api
+        #      architecture: amd64/generic
+        #      mac_addresses:
+        #          - "38:63:bb:43:b8:9c"
+        #      power:
+        #          type: ipmi
+        #          address: 10.0.1.1
+        #          user: maas
+        #          pass: passw0rd
+        #          driver: LAN_2_0
+        #      sticky_ip_address:
+        #          mac_address: "38:63:bb:43:b8:9c"
+        #          requested_address: 192.168.122.6
+