added the labconfig file for att virpod1. Remove the mac

as it gateway br-ex was not configured with MAC.

Change-Id: I32769c8d03dded073889a08d364c7bd3936880d3
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>

1 files changed, 0 insertions, 126 deletions

diff --git a/ci/maas/att/virpod1/deployment.yaml b/ci/maas/att/virpod1/deployment.yaml
deleted file mode 100644
index f03031fe..00000000
--- a/ci/maas/att/virpod1/deployment.yaml
+++ /dev/null
@@ -1,126 +0,0 @@
-# This file defines the deployment for the MAAS environment which is to be
-# deployed and automated.
-demo-maas:
-    maas:
-        # Defines the general setup for the MAAS environment, including the
-        # username and password for the host as well as the MAAS server.
-        user: ubuntu
-        password: ubuntu
-
-        # Contains the virtual machine parameters for creating the MAAS virtual
-        # server. Here you can configure the name of the virsh domain, the
-        # parameters for how the network is attached.
-        name: opnfv-maas-att
-        interfaces: ['bridge=brAdm,model=virtio']
-        memory: 4096
-        vcpus: 2
-        arch: amd64
-        pool: default
-        disk_size: 160G
-
-        # Apt http proxy setting(s)
-        apt_http_proxy:
-
-        apt_sources:
-          - ppa:maas/stable
-          - ppa:juju/stable
-
-        # Virsh power settings
-        # Specifies the uri and keys to use for virsh power control of the 
-        # juju virtual machine. If the uri is omitted, the value for the
-        # --remote is used. If no power settings are desired, then do not
-        # supply the virsh block.
-        virsh:
-            rsa_priv_key: /home/ubuntu/.ssh/id_rsa
-            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
-            uri: qemu+ssh://ubuntu@192.168.10.2/system
-
-        # Defines the IP Address that the configuration script will use to
-        # to access the MAAS controller via SSH.
-        ip_address: 192.168.10.3
-
-        # This section allows the user to set a series of options on the
-        # MAAS server itself. The list of config options can be found in
-        # the upstream MAAS documentation:
-        #  - http://maas.ubuntu.com/docs/api.html#maas-server
-        settings:
-            main_archive: http://us.archive.ubuntu.com/ubuntu
-            upstream_dns: 8.8.8.8
-            maas_name: attvirpod1
-            # kernel_opts: "console=tty0 console=ttyS1,115200n8"
-            # ntp_server: ntp.ubuntu.com
-
-        # This section is used to define the networking parameters for when
-        # the node first comes up. It is fed into the meta-data cloud-init
-        # configuration and is used to configure the networking piece of the
-        # service. The contents of this section are written directly to the
-        # /etc/network/interfaces file.
-        #
-        # Please note, this is slightly different than the
-        # node-group-interfaces section below. This will configure the
-        # machine's networking params, and the node-group-interfaces will
-        # configure the maas node-group interfaces which is used for
-        # controlling the dhcp, dns, etc.
-        network_config: |
-            auto lo
-            iface lo inet loopback
-
-            auto eth0
-            iface eth0 inet static
-            address 192.168.10.3
-            netmask 255.255.255.0
-            network 192.168.10.0
-            broadcast 192.168.10.255
-            gateway 192.168.10.1
-            dns-nameservers 8.8.8.8 127.0.0.1
-
-        # The node-group-interfaces section is used to configure the MAAS
-        # network interfaces. Basic configuration is supported, such as which
-        # device should be bound, the range of IP addresses, etc.
-        # Note: this may contain the special identifiers:
-        #   ${maas_net} - the first 3 octets of the ipv4 address
-        #   ${maas_ip} - the ip address of the MAAS controller 
-        node_group_ifaces:
-            - device: eth0
-              ip: 192.168.10.3
-              subnet_mask: 255.255.255.0
-              broadcast_ip: 192.168.10.255
-              router_ip: 192.168.10.1
-              static_range:
-                  low: 192.168.10.20
-                  high: 192.168.10.100
-              dynamic_range:
-                  low: 192.168.10.101
-                  high: 192.168.10.200
-
-        # Defines the physical nodes which are added to the MAAS cluster
-        # controller upon startup of the node.
-        nodes:
-            - name: node1-control
-              tags: control
-              architecture: amd64/generic
-              mac_addresses:
-                  - "<controller1-mac>"
-              power:
-                  type: ether_wake
-                  mac_address: <controller1-mac>
-
-            - name: node2-compute
-              tags: compute
-              architecture: amd64/generic
-              mac_addresses:
-                  - "<compute1-mac>"
-              power:
-                  type: ether_wake
-                  mac_address:  <compute1-mac>
-
-    # Contains the virtual machine parameters for creating the Juju bootstrap
-    # node virtual machine
-    juju-bootstrap:
-        name: bootstrap
-        interfaces: ['bridge=brAdm,model=virtio']
-        memory: 4096
-        vcpus: 2
-        arch: amd64
-        pool: default
-        disk_size: 120G