diff options
author | 2016-06-06 15:19:31 -0500 | |
---|---|---|
committer | 2016-06-07 01:10:42 -0500 | |
commit | aca4784eacb9b27e8640b90af3edbebea96aa39f (patch) | |
tree | 5680843411f98ffb6a97d2b2940cf0b8bb4293a5 /ci/maas/att | |
parent | cb56a154c5bd3817af14eaddfb7b45b76b6dc30a (diff) |
added the labconfig file for att virpod1. Remove the mac
as it gateway br-ex was not configured with MAC.
Change-Id: I32769c8d03dded073889a08d364c7bd3936880d3
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
Diffstat (limited to 'ci/maas/att')
-rw-r--r-- | ci/maas/att/virpod1/deployment.yaml | 126 |
1 files changed, 0 insertions, 126 deletions
diff --git a/ci/maas/att/virpod1/deployment.yaml b/ci/maas/att/virpod1/deployment.yaml deleted file mode 100644 index f03031fe..00000000 --- a/ci/maas/att/virpod1/deployment.yaml +++ /dev/null @@ -1,126 +0,0 @@ -# This file defines the deployment for the MAAS environment which is to be -# deployed and automated. -demo-maas: - maas: - # Defines the general setup for the MAAS environment, including the - # username and password for the host as well as the MAAS server. - user: ubuntu - password: ubuntu - - # Contains the virtual machine parameters for creating the MAAS virtual - # server. Here you can configure the name of the virsh domain, the - # parameters for how the network is attached. - name: opnfv-maas-att - interfaces: ['bridge=brAdm,model=virtio'] - memory: 4096 - vcpus: 2 - arch: amd64 - pool: default - disk_size: 160G - - # Apt http proxy setting(s) - apt_http_proxy: - - apt_sources: - - ppa:maas/stable - - ppa:juju/stable - - # Virsh power settings - # Specifies the uri and keys to use for virsh power control of the - # juju virtual machine. If the uri is omitted, the value for the - # --remote is used. If no power settings are desired, then do not - # supply the virsh block. - virsh: - rsa_priv_key: /home/ubuntu/.ssh/id_rsa - rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://ubuntu@192.168.10.2/system - - # Defines the IP Address that the configuration script will use to - # to access the MAAS controller via SSH. - ip_address: 192.168.10.3 - - # This section allows the user to set a series of options on the - # MAAS server itself. The list of config options can be found in - # the upstream MAAS documentation: - # - http://maas.ubuntu.com/docs/api.html#maas-server - settings: - main_archive: http://us.archive.ubuntu.com/ubuntu - upstream_dns: 8.8.8.8 - maas_name: attvirpod1 - # kernel_opts: "console=tty0 console=ttyS1,115200n8" - # ntp_server: ntp.ubuntu.com - - # This section is used to define the networking parameters for when - # the node first comes up. It is fed into the meta-data cloud-init - # configuration and is used to configure the networking piece of the - # service. The contents of this section are written directly to the - # /etc/network/interfaces file. - # - # Please note, this is slightly different than the - # node-group-interfaces section below. This will configure the - # machine's networking params, and the node-group-interfaces will - # configure the maas node-group interfaces which is used for - # controlling the dhcp, dns, etc. - network_config: | - auto lo - iface lo inet loopback - - auto eth0 - iface eth0 inet static - address 192.168.10.3 - netmask 255.255.255.0 - network 192.168.10.0 - broadcast 192.168.10.255 - gateway 192.168.10.1 - dns-nameservers 8.8.8.8 127.0.0.1 - - # The node-group-interfaces section is used to configure the MAAS - # network interfaces. Basic configuration is supported, such as which - # device should be bound, the range of IP addresses, etc. - # Note: this may contain the special identifiers: - # ${maas_net} - the first 3 octets of the ipv4 address - # ${maas_ip} - the ip address of the MAAS controller - node_group_ifaces: - - device: eth0 - ip: 192.168.10.3 - subnet_mask: 255.255.255.0 - broadcast_ip: 192.168.10.255 - router_ip: 192.168.10.1 - static_range: - low: 192.168.10.20 - high: 192.168.10.100 - dynamic_range: - low: 192.168.10.101 - high: 192.168.10.200 - - # Defines the physical nodes which are added to the MAAS cluster - # controller upon startup of the node. - nodes: - - name: node1-control - tags: control - architecture: amd64/generic - mac_addresses: - - "<controller1-mac>" - power: - type: ether_wake - mac_address: <controller1-mac> - - - name: node2-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "<compute1-mac>" - power: - type: ether_wake - mac_address: <compute1-mac> - - # Contains the virtual machine parameters for creating the Juju bootstrap - # node virtual machine - juju-bootstrap: - name: bootstrap - interfaces: ['bridge=brAdm,model=virtio'] - memory: 4096 - vcpus: 2 - arch: amd64 - pool: default - disk_size: 120G |