summaryrefslogtreecommitdiffstats
path: root/docs/configguide/featureconfig.rst
blob: 78ebfc6ed044fd9f4a295b4edd26da8dff28e095 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
===============================================================
IPv6 Configuration - Setting Up a Service VM as an IPv6 vRouter
===============================================================

This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Brahmaputra Release
installers. The environment may be pure OpenStack option or Open Daylight L2-only option.
The deployment model may be HA or non-HA. The infrastructure may be bare metal or virtual environment.

For complete instructions and documentations of setting up service VM as an IPv6 vRouter using ANY method,
please refer to:

1. IPv6 Configuration Guide (HTML): http://artifacts.opnfv.org/ipv6/docs/setupservicevm/index.html
2. IPv6 User Guide (HTML): http://artifacts.opnfv.org/ipv6/docs/gapanalysis/index.html

****************************
Pre-configuration Activities
****************************

The configuration will work in 2 environments:

1. OpenStack-only environment
2. OpenStack with Open Daylight L2-only environment

Depending on which installer will be used to deploy OPNFV, each environment may be deployed
on bare metal or virtualized infrastructure. Each deployment may be HA or non-HA.

Refer to the previous installer configuration chapters, installations guide and release notes.

******************************************
Setup Manual in OpenStack-Only Environment
******************************************

If you intend to set up a service VM as an IPv6 vRouter in OpenStack-only environment of
OPNFV Brahmaputra Release, please **NOTE** that:

* Because the anti-spoofing rules of Security Group feature in OpenStack prevents
  a VM from forwarding packets, we need to disable Security Group feature in the
  OpenStack-only environment.
* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
  Please change as needed to fit your environment.
* The instructions apply to both deployment model of single controller node and
  HA (High Availability) deployment model where multiple controller nodes are used.

-----------------------------
Install OPNFV and Preparation
-----------------------------

**OPNFV-NATIVE-INSTALL-1**: To install OpenStack-only environment of OPNFV Brahmaputra Release:

**Fuel** Installer:

.. code-block:: bash

    # HA deployment in OpenStack-only environment
    sudo deploy.sh -s os-nofeature-ha

    # Non-HA deployment in OpenStack-only environment
    sudo deploy.sh -s os-nofeature-noha

Please **NOTE** that currently only ``Fuel`` installer supports this environment.

**OPNFV-NATIVE-INSTALL-2**: Clone the following GitHub repository to get the
configuration and metadata files

.. code-block:: bash

    git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc

----------------------------------------------
Disable Security Groups in OpenStack ML2 Setup
----------------------------------------------

**OPNFV-NATIVE-SEC-1**: Change the settings in
``/etc/neutron/plugins/ml2/ml2_conf.ini`` as follows

.. code-block:: bash

    # /etc/neutron/plugins/ml2/ml2_conf.ini
    [securitygroup]
    enable_security_group = False
    firewall_driver = neutron.agent.firewall.NoopFirewallDriver

**OPNFV-NATIVE-SEC-2**: Change the settings in ``/etc/nova/nova.conf`` as follows

.. code-block:: bash

    # /etc/nova/nova.conf
    [DEFAULT]
    security_group_api = nova
    firewall_driver = nova.virt.firewall.NoopFirewallDriver

**OPNFV-NATIVE-SEC-3**: After updating the settings, you will have to restart the
``Neutron`` and ``Nova`` services.

**Please note that the commands of restarting** ``Neutron`` **and** ``Nova`` **would vary
depending on the installer. Please refer to relevant documentation of specific installers**

---------------------------------
Set Up Service VM as IPv6 vRouter
---------------------------------

**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running.
We have to source the tenant credentials in this step. The following command should be executed:

.. code-block:: bash

    # source the tenant credentials in OPNFV
    source /opt/admin-openrc.sh

Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example,
in ``devstack``, the following command should be used:

.. code-block:: bash

    # source the tenant credentials in devstack
    source openrc admin demo

**Please refer to relevant documentation of installers if you encounter any issue**.

**OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter``

.. code-block:: bash

    wget https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2

**OPNFV-NATIVE-SETUP-3**: Import Fedora22 image to ``glance``

.. code-block:: bash

    glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2

**OPNFV-NATIVE-SETUP-4: This step is Informational. OPNFV Installer has taken care of this step
during deployment. You may refer to this step only if there is any issue, or if you are using other installers**.

We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``OS-NATIVE-SETUP-4`` and
``OS-NATIVE-SETUP-5`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.html#set-up-service-vm-as-ipv6-vrouter>`_.

**OPNFV-NATIVE-SETUP-5**: Create Neutron routers ``ipv4-router`` and ``ipv6-router``
which need to provide external connectivity.

.. code-block:: bash

    neutron router-create ipv4-router
    neutron router-create ipv6-router

**OPNFV-NATIVE-SETUP-6**: Create an external network/subnet ``ext-net`` using
the appropriate values based on the data-center physical network setup.

.. code-block:: bash

    neutron net-create --router:external ext-net
    neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24

**OPNFV-NATIVE-SETUP-7**: Create Neutron networks ``ipv4-int-network1`` and
``ipv6-int-network2`` with port_security disabled

.. code-block:: bash

    neutron net-create --port_security_enabled=False ipv4-int-network1
    neutron net-create --port_security_enabled=False ipv6-int-network2

**OPNFV-NATIVE-SETUP-8**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network
``ipv4-int-network1``, and associate it to ``ipv4-router``.

.. code-block:: bash

    neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
    neutron router-interface-add ipv4-router ipv4-int-subnet1

**OPNFV-NATIVE-SETUP-9**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router``
and ``ipv6-router``.

.. code-block:: bash

    neutron router-gateway-set ipv4-router ext-net
    neutron router-gateway-set ipv6-router ext-net

**OPNFV-NATIVE-SETUP-10**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and
one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to
``ipv6-router``

.. code-block:: bash

    neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv6-int-network2 10.0.0.0/24
    neutron subnet-create --name ipv6-int-subnet2 --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-int-network2 2001:db8:0:1::/64
    neutron router-interface-add ipv6-router ipv4-int-subnet2
    neutron router-interface-add ipv6-router ipv6-int-subnet2

**OPNFV-NATIVE-SETUP-11**: Create a keypair

.. code-block:: bash

    nova keypair-add vRouterKey > ~/vRouterKey

**OPNFV-NATIVE-SETUP-12**: Create ports for vRouter (with some specific MAC address
- basically for automation - to know the IPv6 addresses that would be assigned to the port).

.. code-block:: bash

    neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2
    neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1

**OPNFV-NATIVE-SETUP-13**: Create ports for VM1 and VM2.

.. code-block:: bash

    neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
    neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1

**OPNFV-NATIVE-SETUP-14**: Update ``ipv6-router`` with routing information to subnet
``2001:db8:0:2::/64``

.. code-block:: bash

    neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111

**OPNFV-NATIVE-SETUP-15**: Boot Service VM (``vRouter``), VM1 and VM2

.. code-block:: bash

    nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter
    nova list
    nova console-log vRouter #Please wait for some 10 to 15 minutes so that necessary packages (like radvd) are installed and vRouter is up.
    nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1
    nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
    nova list # Verify that all the VMs are in ACTIVE state.

**OPNFV-NATIVE-SETUP-16**: If all goes well, the IPv6 addresses assigned to the VMs
would be as shown as follows:

.. code-block:: bash

    vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
    vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
    VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
    VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64

**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``.

Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller
node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to
enter the ``ipv6-router`` namespace. The following command in Neutron will display the
controller on which the ``ipv6-router`` is spawned.

.. code-block:: bash

    neutron l3-agent-list-hosting-router ipv6-router

Then you login to that controller.

To ``SSH`` to ``vRouter``, you can execute the following command.

.. code-block:: bash

    sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111

****************************************************************
Setup Manual in OpenStack with Open Daylight L2-Only Environment
****************************************************************

If you intend to set up a service VM as an IPv6 vRouter in an environment of OpenStack
and Open Daylight L2-only of OPNFV Brahmaputra Release, please **NOTE** that:

* The hostnames, IP addresses, and username are for exemplary purpose in instructions.
  Please change as needed to fit your environment.
* The instructions apply to both deployment model of single controller node and
  HA (High Availability) deployment model where multiple controller nodes are used.
* However, in case of HA, when ``ipv6-router`` is created in step **SETUP-SVM-11**,
  it could be created in any of the controller node. Thus you need to identify in which
  controller node ``ipv6-router`` is created in order to manually spawn ``radvd`` daemon
  inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through **SETUP-SVM-30**.

-----------------------------
Install OPNFV and Preparation
-----------------------------

**OPNFV-INSTALL-1**: To install OpenStack with Open Daylight L2-only environment
of OPNFV Brahmaputra Release:

**Apex Installer**:

.. code-block:: bash

    # HA deployment in OpenStack with Open Daylight L2-only environment
    sudo opnfv-deploy -d /etc/opnfv/os-odl_l2-nofeature-ha.yaml

    # Non-HA deployment in OpenStack with Open Daylight L2-only environment
    # Currently it is not supported by Apex installer.

**Fuel** Installer:

.. code-block:: bash

    # HA deployment in OpenStack with Open Daylight L2-only environment
    sudo deploy.sh -s os-odl_l2-nofeature-ha

    # Non-HA deployment in OpenStack with Open Daylight L2-only environment
    sudo deploy.sh -s os-odl_l2-nofeature-noha

Please **NOTE** that currently only ``Apex`` and ``Fuel`` installer support this environment.

**OPNFV-INSTALL-2**: Clone the following GitHub repository to get the
configuration and metadata files

.. code-block:: bash

    git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc

---------------------------------------------------
Source the Credentials in OpenStack Controller Node
---------------------------------------------------

**SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal,
and change directory to where OpenStack is installed.

**SETUP-SVM-2**: We have to source the tenant credentials in this step.
The following command should be executed:

.. code-block:: bash

    # source the tenant credentials in OPNFV
    source /opt/admin-openrc.sh

Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example,
in ``devstack``, the following command should be used:

.. code-block:: bash

    # source the tenant credentials in devstack
    source openrc admin demo

**Please refer to relevant documentation of installers if you encounter any issue**.

------------------------------------------------------------------------------------
Informational Note: Move Public Network from Physical Network Interface to ``br-ex``
------------------------------------------------------------------------------------

**This Step is Informational. OPNFV Installer has taken care of this Step during deployment.
You may refer to this Step only if there is any issue, or if you are using other installers**.

We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving
the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and
``SETUP-SVM-4`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/4-ipv6-configguide-servicevm.html#add-external-connectivity-to-br-ex>`_.

--------------------------------------------------------
Create IPv4 Subnet and Router with External Connectivity
--------------------------------------------------------

**SETUP-SVM-5**: Create a Neutron router ``ipv4-router`` which needs to provide external connectivity.

.. code-block:: bash

    neutron router-create ipv4-router

**SETUP-SVM-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
data-center physical network setup.

.. code-block:: bash

    neutron net-create --router:external ext-net
    neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24

Please note that the IP addresses in the command above are for exemplary purpose. **Please replace the IP addresses of
your actual network**.

**SETUP-SVM-7**: Associate the ``ext-net`` to the Neutron router ``ipv4-router``.

.. code-block:: bash

    neutron router-gateway-set ipv4-router ext-net

**SETUP-SVM-8**: Create an internal/tenant IPv4 network ``ipv4-int-network1``

.. code-block:: bash

    neutron net-create ipv4-int-network1

**SETUP-SVM-9**: Create an IPv4 subnet ``ipv4-int-subnet1`` in the internal network ``ipv4-int-network1``

.. code-block:: bash

    neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24

**SETUP-SVM-10**: Associate the IPv4 internal subnet ``ipv4-int-subnet1`` to the Neutron router ``ipv4-router``.

.. code-block:: bash

    neutron router-interface-add ipv4-router ipv4-int-subnet1

--------------------------------------------------------
Create IPv6 Subnet and Router with External Connectivity
--------------------------------------------------------

Now, let us create a second neutron router where we can "manually" spawn a ``radvd`` daemon to simulate an external
IPv6 router.

**SETUP-SVM-11**:  Create a second Neutron router ``ipv6-router`` which needs to provide external connectivity

.. code-block:: bash

    neutron router-create ipv6-router

**SETUP-SVM-12**: Associate the ``ext-net`` to the Neutron router ``ipv6-router``

.. code-block:: bash

    neutron router-gateway-set ipv6-router ext-net

**SETUP-SVM-13**: Create a second internal/tenant IPv4 network ``ipv4-int-network2``

.. code-block:: bash

    neutron net-create ipv4-int-network2

**SETUP-SVM-14**: Create an IPv4 subnet ``ipv4-int-subnet2`` for the ``ipv6-router`` internal network
``ipv4-int-network2``

.. code-block:: bash

    neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv4-int-network2 10.0.0.0/24

**SETUP-SVM-15**: Associate the IPv4 internal subnet ``ipv4-int-subnet2`` to the Neutron router ``ipv6-router``.

.. code-block:: bash

    neutron router-interface-add ipv6-router ipv4-int-subnet2

--------------------------------------------------
Prepare Image, Metadata and Keypair for Service VM
--------------------------------------------------

**SETUP-SVM-16**: Download ``fedora22`` image which would be used as ``vRouter``

.. code-block:: bash

    glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --is-public true --copy-from https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2

**SETUP-SVM-17**: Create a keypair

.. code-block:: bash

    nova keypair-add vRouterKey > ~/vRouterKey

**SETUP-SVM-18**: Create ports for ``vRouter`` and both the VMs with some specific MAC addresses.

.. code-block:: bash

    neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv4-int-network2
    neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
    neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
    neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1

----------------------------------------------------------------------------------------------------------
Boot Service VM (``vRouter``) with ``eth0`` on ``ipv4-int-network2`` and ``eth1`` on ``ipv4-int-network1``
----------------------------------------------------------------------------------------------------------

Let us boot the service VM (``vRouter``) with ``eth0`` interface on ``ipv4-int-network2`` connecting to ``ipv6-router``,
and ``eth1`` interface on ``ipv4-int-network1`` connecting to ``ipv4-router``.

**SETUP-SVM-19**: Boot the ``vRouter`` using ``Fedora22`` image on the OpenStack Compute Node with hostname
``opnfv-os-compute``

.. code-block:: bash

    nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter

Please **note** that ``/opt/stack/opnfv_os_ipv6_poc/metadata.txt`` is used to enable the ``vRouter`` to automatically
spawn a ``radvd``, and

* Act as an IPv6 vRouter which advertises the RA (Router Advertisements) with prefix
  ``2001:db8:0:2::/64`` on its internal interface (``eth1``).
* Forward IPv6 traffic from internal interface (``eth1``)

**SETUP-SVM-20**: Verify that ``Fedora22`` image boots up successfully and vRouter has ``ssh`` keys properly injected

.. code-block:: bash

    nova list
    nova console-log vRouter

Please note that **it may take a few minutes** for the necessary packages to get installed and ``ssh`` keys
to be injected.

.. code-block:: bash

    # Sample Output
    [  762.884523] cloud-init[871]: ec2: #############################################################
    [  762.909634] cloud-init[871]: ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
    [  762.931626] cloud-init[871]: ec2: 2048 e3:dc:3d:4a:bc:b6:b0:77:75:a1:70:a3:d0:2a:47:a9   (RSA)
    [  762.957380] cloud-init[871]: ec2: -----END SSH HOST KEY FINGERPRINTS-----
    [  762.979554] cloud-init[871]: ec2: #############################################################

-------------------------------------------
Boot Two Other VMs in ``ipv4-int-network1``
-------------------------------------------

In order to verify that the setup is working, let us create two cirros VMs with ``eth1`` interface on the
``ipv4-int-network1``, i.e., connecting to ``vRouter`` ``eth1`` interface for internal network.

We will have to configure appropriate ``mtu`` on the VMs' interface by taking into account the tunneling
overhead and any physical switch requirements. If so, push the ``mtu`` to the VM either using ``dhcp``
options or via ``meta-data``.

**SETUP-SVM-21**: Create VM1 on OpenStack Controller Node with hostname ``opnfv-os-controller``

.. code-block:: bash

    nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1

**SETUP-SVM-22**: Create VM2 on OpenStack Compute Node with hostname ``opnfv-os-compute``

.. code-block:: bash

    nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2

**SETUP-SVM-23**: Confirm that both the VMs are successfully booted.

.. code-block:: bash

    nova list
    nova console-log VM1
    nova console-log VM2

----------------------------------
Spawn ``RADVD`` in ``ipv6-router``
----------------------------------

Let us manually spawn a ``radvd`` daemon inside ``ipv6-router`` namespace to simulate an external router.
First of all, we will have to identify the ``ipv6-router`` namespace and move to the namespace.

Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
nodes are used, ``ipv6-router`` created in step **SETUP-SVM-11** could be in any of the controller
node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to manually
spawn ``radvd`` daemon inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through
**SETUP-SVM-30**. The following command in Neutron will display the controller on which the
``ipv6-router`` is spawned.

.. code-block:: bash

    neutron l3-agent-list-hosting-router ipv6-router

Then you login to that controller and execute steps **SETUP-SVM-24**
through **SETUP-SVM-30**

**SETUP-SVM-24**: identify the ``ipv6-router`` namespace and move to the namespace

.. code-block:: bash

    sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') bash

**SETUP-SVM-25**: Upon successful execution of the above command, you will be in the router namespace.
Now let us configure the IPv6 address on the <qr-xxx> interface.

.. code-block:: bash

    export router_interface=$(ip a s | grep -w "global qr-*" | awk '{print $7}')
    ip -6 addr add 2001:db8:0:1::1 dev $router_interface

**SETUP-SVM-26**: Update the sample file ``/opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf``
with ``$router_interface``.

.. code-block:: bash

    cp /opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf /tmp/radvd.$router_interface.conf
    sed -i 's/$router_interface/'$router_interface'/g' /tmp/radvd.$router_interface.conf

**SETUP-SVM-27**: Spawn a ``radvd`` daemon to simulate an external router. This ``radvd`` daemon advertises an IPv6
subnet prefix of ``2001:db8:0:1::/64`` using RA (Router Advertisement) on its $router_interface so that ``eth0``
interface of ``vRouter`` automatically configures an IPv6 SLAAC address.

.. code-block:: bash

    $radvd -C /tmp/radvd.$router_interface.conf -p /tmp/br-ex.pid.radvd -m syslog

**SETUP-SVM-28**: Add an IPv6 downstream route pointing to the ``eth0`` interface of vRouter.

.. code-block:: bash

    ip -6 route add 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111

**SETUP-SVM-29**: The routing table should now look similar to something shown below.

.. code-block:: bash

    ip -6 route show
    2001:db8:0:1::1 dev qr-42968b9e-62 proto kernel metric 256
    2001:db8:0:1::/64 dev qr-42968b9e-62 proto kernel metric 256 expires 86384sec
    2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111 dev qr-42968b9e-62 proto ra metric 1024 expires 29sec
    fe80::/64 dev qg-3736e0c7-7c proto kernel metric 256
    fe80::/64 dev qr-42968b9e-62 proto kernel metric 256

**SETUP-SVM-30**: If all goes well, the IPv6 addresses assigned to the VMs would be as shown as follows:

.. code-block:: bash

    vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64
    vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64
    VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
    VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64

--------------------------------
Testing to Verify Setup Complete
--------------------------------

Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address
using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``.

Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command.

**SETUP-SVM-31**: ``ssh`` VM1

.. code-block:: bash

    ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address>

If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify
that IPv6 addresses are configured on ``eth0`` interface.

**SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64``

.. code-block:: bash

    ip address show

**SETUP-SVM-33**: ping some external IPv6 address, e.g. ``ipv6-router``

.. code-block:: bash

    ping6 2001:db8:0:1::1

If the above ping6 command succeeds, it implies that ``vRouter`` was able to successfully forward the IPv6 traffic
to reach external ``ipv6-router``.

**SETUP-SVM-34**: When all tests show that the setup works as expected, You can now exit the ``ipv6-router`` namespace.

.. code-block:: bash

    exit