diff options
Diffstat (limited to 'vrouter')
| -rw-r--r-- | vrouter/Service_VM_as_vRouter.rst | 44 | ||||
| -rw-r--r-- | vrouter/Service_VM_as_vRouter.txt | 44 | ||||
| -rw-r--r-- | vrouter/setup_ipv6_vrouter.rst | 122 | ||||
| -rw-r--r-- | vrouter/setup_ipv6_vrouter.txt | 122 | ||||
| -rw-r--r-- | vrouter/setup_service_vm.rst | 198 | ||||
| -rw-r--r-- | vrouter/setup_service_vm.txt | 198 |
6 files changed, 0 insertions, 728 deletions
diff --git a/vrouter/Service_VM_as_vRouter.rst b/vrouter/Service_VM_as_vRouter.rst deleted file mode 100644 index 8592323..0000000 --- a/vrouter/Service_VM_as_vRouter.rst +++ /dev/null @@ -1,44 +0,0 @@ -==================================
-Exercising Service VM as a vRouter
-==================================
-
-There are 3 steps to set up a service VM as a vRouter:
-
-- Step 1: `Get a service VM running`_
-
-- Step 2: `Handling Neutron Security Group Feature`_
-
-- Step 3: `Set up an IPv6 vRouter on the Service VM`_
-
-***************************
-_`Get a Service VM Running`
-***************************
-
-Please click `Set up Service VM`_ page for instructions to get a service VM running.
-
-.. _`Set up Service VM`: ./setup_service_vm.html
-
-******************************************
-_`Handling Neutron Security Group Feature`
-******************************************
-
-------------------------------
-Disable Security Group Feature
-------------------------------
-
-If Open Stack is integrated and running with Open Daylight, we need to completely disable Security Group feature in Open Stack because Open Daylight doesn’t support it.
-
-----------------------------------------------------------
-Use Neutron ML2 Port Security Extension (Kilo and Liberty)
-----------------------------------------------------------
-
-For Open Stack Kilo or Liberty with ML2 OVS only (without Open Daylight), we need to use Port Security Extension of Neutron and disable Anti-spoofing Rule on the service VM.
-
-*******************************************
-_`Set up an IPv6 vRouter on the Service VM`
-*******************************************
-
-Please click `Set up IPv6 vRouter`_ page for instructions to set up an IPv6 vRouter on a Service VM.
-
-.. _`Set up IPv6 vRouter`: ./setup_ipv6_vrouter.html
-
diff --git a/vrouter/Service_VM_as_vRouter.txt b/vrouter/Service_VM_as_vRouter.txt deleted file mode 100644 index 8592323..0000000 --- a/vrouter/Service_VM_as_vRouter.txt +++ /dev/null @@ -1,44 +0,0 @@ -==================================
-Exercising Service VM as a vRouter
-==================================
-
-There are 3 steps to set up a service VM as a vRouter:
-
-- Step 1: `Get a service VM running`_
-
-- Step 2: `Handling Neutron Security Group Feature`_
-
-- Step 3: `Set up an IPv6 vRouter on the Service VM`_
-
-***************************
-_`Get a Service VM Running`
-***************************
-
-Please click `Set up Service VM`_ page for instructions to get a service VM running.
-
-.. _`Set up Service VM`: ./setup_service_vm.html
-
-******************************************
-_`Handling Neutron Security Group Feature`
-******************************************
-
-------------------------------
-Disable Security Group Feature
-------------------------------
-
-If Open Stack is integrated and running with Open Daylight, we need to completely disable Security Group feature in Open Stack because Open Daylight doesn’t support it.
-
-----------------------------------------------------------
-Use Neutron ML2 Port Security Extension (Kilo and Liberty)
-----------------------------------------------------------
-
-For Open Stack Kilo or Liberty with ML2 OVS only (without Open Daylight), we need to use Port Security Extension of Neutron and disable Anti-spoofing Rule on the service VM.
-
-*******************************************
-_`Set up an IPv6 vRouter on the Service VM`
-*******************************************
-
-Please click `Set up IPv6 vRouter`_ page for instructions to set up an IPv6 vRouter on a Service VM.
-
-.. _`Set up IPv6 vRouter`: ./setup_ipv6_vrouter.html
-
diff --git a/vrouter/setup_ipv6_vrouter.rst b/vrouter/setup_ipv6_vrouter.rst deleted file mode 100644 index 06d2de8..0000000 --- a/vrouter/setup_ipv6_vrouter.rst +++ /dev/null @@ -1,122 +0,0 @@ -======================================
-Set up an IPv6 vRouter on a Service VM
-======================================
-
-| Here you will find the steps involved in creating a ServiceVM that acts as an IPv6 vRouter. In this example, we will be using a CentOS7 image as vRouter (we should be able to use other OS as well) and devstack for OpenStack installation. We need to enable Port Security Extension as the extension_drivers in ML2 configuration file.
-
-| Following is a sample configuration of devstack local.conf file.
-
-| **# [[local|localrc]]**
-| `DATA_DIR=$DEST/data`
-| `SCREEN_LOGDIR=$DATA_DIR/logs`
-| `LOGFILE=$SCREEN_LOGDIR/stack.sh.log`
-| `ADMIN_PASSWORD=password`
-| `MYSQL_PASSWORD=password`
-| `RABBIT_PASSWORD=password`
-| `SERVICE_PASSWORD=password`
-| `SERVICE_TOKEN=token`
-| `disable_service n-net tempest h-eng h-api h-api-cfn h-api-cw`
-| `enable_service q-svc q-dhcp q-meta q-agt q-l3 n-novnc`
-| **# [[post-config|/$Q_PLUGIN_CONF_FILE]]**
-| **# [ml2]**
-| `extension_drivers=port_security`
-
-| After successful installation of OpenStack with the above configuration, we shall create the necessary neutron networks/subnets/ports etc.
-| `cd devstack`
-| `./stack.sh`
-
-| # Source the tenant credentials.
-| `source openrc admin demo`
-| # Create a Neutron router which provides external connectivity.
-| `neutron router-create router1`
-| # Create an external network using the appropriate values based on the data-center physical network setup.
-| `neutron net-create --provider:network_type <flat/vlan> --provider:physical_network <physical-network> --provider:segmentation_id <segmentation-id-if-vlan> --router:external ext-net`
-| # Configure ipv6_gateway=<LLA-of-upstream-router> in the Neutron L3 agent configuration file.
-| # Associate the ext-net to the neutron router.
-| `neutron router-gateway-set router1 ext-net`
-| # Create an IPv6 internal network.
-| `neutron net-create ipv6-internal-network`
-| # Create an IPv6 subnet in the internal network.
-| `neutron subnet-create --name ipv6-int-subnet --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-internal-network 2001:db8:0:1::/64`
-| # Associate the internal subnet to a neutron router.
-| `neutron router-interface-add router1 ipv6-int-subnet`
-
-| Now we shall create an isolated network which is the internal network of vRouter.
-| # Create an isolated router for the tenant internal network.
-| `neutron router-create router2`
-| # Create a Neutron Internal Network.
-| `neutron net-create tenant-internal-network`
-| # Create an IPv4 subnet in the internal network.
-| `neutron subnet-create --name ipv4-int-subnet tenant-internal-network 10.0.0.1/24`
-| # Associate the router2 to IPv4 subnet created above.
-| `neutron router-interface-add <router2-id> <ipv4-int-subnet-id>`
-
-| Mapping this configuration to `PoC-1`_.
-
-.. _`PoC-1`: /ipv6/images/ipv6-poc-1.png
-
-- `ipv6-internal-network and ext-net is the Red colored network.`
-- `tenant-internal-network is the Green colored network.`
-
-| Lets create two neutron ports one from ext-net and the other from tenant-internal-network for the vRouter VM
-| `neutron port-create ipv6-internal-network --port-security-enabled=False --name enp0s3-port`
-| `neutron port-create tenant-internal-network --port-security-enabled=False --name enp0s8-port`
-
-| Download the Centos7 image which is used as vRouter.
-| `glance image-create --name 'Centos7' --disk-format qcow2 --container-format bare --is-public true --copy-from http://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2`
-
-| Create a keypair.
-| `nova keypair-add vRouterKey > ~/vRouterKey`
-
-| Spawn the Centos7 image with two nics (i.e., enp0s3-port and enp0s8-port)
-| `nova boot --image <Centos7-image-id> –flavor m1.small --nic port-id=$(neutron port-show -f value -F id enp0s3-port) –nic --nic port-id=$(neutron port-show -f value -F id enp0s8-port) --key-name vRouterKey CentOSvRouter`
-
-| Verify that CentOSvRouter boots up successfully and keypair is injected.
-| `nova list`
-| `nova console-log CentOSvRouter`
-
-| After the image boots up successfully, from the router1 namespace, ssh to vRouter using the keypair.
-| `sudo ip netns`
-| `sudo ip netns exec <router1-namespace> bash`
-| `ssh -i ~/vRouterKey centos@<ip-address-of-the-image>`
-
-| As a one time job, before we can create the snapshot, execute the steps (i.e., SLAAC setup) mentioned at the following link.
-| `https://wiki.opnfv.org/ipv6_opnfv_project/vm_as_router`
-
-| In order to verify that the setup is working, lets create some cirros VMs on the "tenant-internal-network" (i.e., vRouter internal network).
-| `nova boot --image <Cirros-image-id> --flavor m1.tiny --nic net-id=<tenant-internal-network-id> VM1`
-| `nova boot --image <Cirros-image-id> --flavor m1.tiny --nic net-id=<tenant-internal-network-id> VM2`
-
-| Confirm that both the VMs have successfully booted up.
-| `nova list`
-| `nova console-log VM1`
-| `nova console-log VM2`
-
-| Add the necessary security group ingress rules.
-| `source openrc demo demo`
-| # SSH access to the VMs
-| `neutron security-group-rule-create --direction ingress --protocol tcp --port-range-min 22 --port-range-max 22 --remote-ip-prefix 10.0.0.0/24 default`
-| # Permit IPv6 Router Advts from the vRouter internal interface to the VMs.
-| `neutron security-group-rule-create --direction ingress --ethertype IPv6 --protocol icmpv6 --port-range-min 134 --remote-ip-prefix fe80::/64 default`
-
-| SSH to the cirros VMs to check the IPv6 forwarding use-case.
-| `sudo ip netns`
-| `sudo ip netns exec <router2-namespace> bash`
-| `ssh cirros@<ip-address-of-the-image>`
-
-| Note: default password of cirros image would be "cubswin:)"
-
-| Verify that Cirros image has an IPv6 address assigned via SLAAC with a prefix of "2001:db8:0:2::/64"
-| `ip address`
-| # verify that default route points to the LLA of enp0s8 interface of vRouter.
-| `ip -6 route`
-
-| Try pinging to the internal router interface of router1 (i.e., 2001:db8:0:1::1/64)
-| `ping6 2001:db8:0:1::1/64`
-
-| If all goes well, ping6 should succeed which shows that vRouter is forwarding the IPv6 traffic of instances on the tenant-internal-network.
-
-| At this state, we can create a snapshot of the CentOSvRouter and use it in any other similar OpenStack setup.
-| `nova image-create <CentOSvRouter-id> <Snapshot-name>`
-| `nova image-list #You will find the snapshot you just created above.`
-
diff --git a/vrouter/setup_ipv6_vrouter.txt b/vrouter/setup_ipv6_vrouter.txt deleted file mode 100644 index 06d2de8..0000000 --- a/vrouter/setup_ipv6_vrouter.txt +++ /dev/null @@ -1,122 +0,0 @@ -======================================
-Set up an IPv6 vRouter on a Service VM
-======================================
-
-| Here you will find the steps involved in creating a ServiceVM that acts as an IPv6 vRouter. In this example, we will be using a CentOS7 image as vRouter (we should be able to use other OS as well) and devstack for OpenStack installation. We need to enable Port Security Extension as the extension_drivers in ML2 configuration file.
-
-| Following is a sample configuration of devstack local.conf file.
-
-| **# [[local|localrc]]**
-| `DATA_DIR=$DEST/data`
-| `SCREEN_LOGDIR=$DATA_DIR/logs`
-| `LOGFILE=$SCREEN_LOGDIR/stack.sh.log`
-| `ADMIN_PASSWORD=password`
-| `MYSQL_PASSWORD=password`
-| `RABBIT_PASSWORD=password`
-| `SERVICE_PASSWORD=password`
-| `SERVICE_TOKEN=token`
-| `disable_service n-net tempest h-eng h-api h-api-cfn h-api-cw`
-| `enable_service q-svc q-dhcp q-meta q-agt q-l3 n-novnc`
-| **# [[post-config|/$Q_PLUGIN_CONF_FILE]]**
-| **# [ml2]**
-| `extension_drivers=port_security`
-
-| After successful installation of OpenStack with the above configuration, we shall create the necessary neutron networks/subnets/ports etc.
-| `cd devstack`
-| `./stack.sh`
-
-| # Source the tenant credentials.
-| `source openrc admin demo`
-| # Create a Neutron router which provides external connectivity.
-| `neutron router-create router1`
-| # Create an external network using the appropriate values based on the data-center physical network setup.
-| `neutron net-create --provider:network_type <flat/vlan> --provider:physical_network <physical-network> --provider:segmentation_id <segmentation-id-if-vlan> --router:external ext-net`
-| # Configure ipv6_gateway=<LLA-of-upstream-router> in the Neutron L3 agent configuration file.
-| # Associate the ext-net to the neutron router.
-| `neutron router-gateway-set router1 ext-net`
-| # Create an IPv6 internal network.
-| `neutron net-create ipv6-internal-network`
-| # Create an IPv6 subnet in the internal network.
-| `neutron subnet-create --name ipv6-int-subnet --ip-version 6 --ipv6-ra-mode slaac --ipv6-address-mode slaac ipv6-internal-network 2001:db8:0:1::/64`
-| # Associate the internal subnet to a neutron router.
-| `neutron router-interface-add router1 ipv6-int-subnet`
-
-| Now we shall create an isolated network which is the internal network of vRouter.
-| # Create an isolated router for the tenant internal network.
-| `neutron router-create router2`
-| # Create a Neutron Internal Network.
-| `neutron net-create tenant-internal-network`
-| # Create an IPv4 subnet in the internal network.
-| `neutron subnet-create --name ipv4-int-subnet tenant-internal-network 10.0.0.1/24`
-| # Associate the router2 to IPv4 subnet created above.
-| `neutron router-interface-add <router2-id> <ipv4-int-subnet-id>`
-
-| Mapping this configuration to `PoC-1`_.
-
-.. _`PoC-1`: /ipv6/images/ipv6-poc-1.png
-
-- `ipv6-internal-network and ext-net is the Red colored network.`
-- `tenant-internal-network is the Green colored network.`
-
-| Lets create two neutron ports one from ext-net and the other from tenant-internal-network for the vRouter VM
-| `neutron port-create ipv6-internal-network --port-security-enabled=False --name enp0s3-port`
-| `neutron port-create tenant-internal-network --port-security-enabled=False --name enp0s8-port`
-
-| Download the Centos7 image which is used as vRouter.
-| `glance image-create --name 'Centos7' --disk-format qcow2 --container-format bare --is-public true --copy-from http://cloud.centos.org/centos/7/images/CentOS-7-x86_64-GenericCloud.qcow2`
-
-| Create a keypair.
-| `nova keypair-add vRouterKey > ~/vRouterKey`
-
-| Spawn the Centos7 image with two nics (i.e., enp0s3-port and enp0s8-port)
-| `nova boot --image <Centos7-image-id> –flavor m1.small --nic port-id=$(neutron port-show -f value -F id enp0s3-port) –nic --nic port-id=$(neutron port-show -f value -F id enp0s8-port) --key-name vRouterKey CentOSvRouter`
-
-| Verify that CentOSvRouter boots up successfully and keypair is injected.
-| `nova list`
-| `nova console-log CentOSvRouter`
-
-| After the image boots up successfully, from the router1 namespace, ssh to vRouter using the keypair.
-| `sudo ip netns`
-| `sudo ip netns exec <router1-namespace> bash`
-| `ssh -i ~/vRouterKey centos@<ip-address-of-the-image>`
-
-| As a one time job, before we can create the snapshot, execute the steps (i.e., SLAAC setup) mentioned at the following link.
-| `https://wiki.opnfv.org/ipv6_opnfv_project/vm_as_router`
-
-| In order to verify that the setup is working, lets create some cirros VMs on the "tenant-internal-network" (i.e., vRouter internal network).
-| `nova boot --image <Cirros-image-id> --flavor m1.tiny --nic net-id=<tenant-internal-network-id> VM1`
-| `nova boot --image <Cirros-image-id> --flavor m1.tiny --nic net-id=<tenant-internal-network-id> VM2`
-
-| Confirm that both the VMs have successfully booted up.
-| `nova list`
-| `nova console-log VM1`
-| `nova console-log VM2`
-
-| Add the necessary security group ingress rules.
-| `source openrc demo demo`
-| # SSH access to the VMs
-| `neutron security-group-rule-create --direction ingress --protocol tcp --port-range-min 22 --port-range-max 22 --remote-ip-prefix 10.0.0.0/24 default`
-| # Permit IPv6 Router Advts from the vRouter internal interface to the VMs.
-| `neutron security-group-rule-create --direction ingress --ethertype IPv6 --protocol icmpv6 --port-range-min 134 --remote-ip-prefix fe80::/64 default`
-
-| SSH to the cirros VMs to check the IPv6 forwarding use-case.
-| `sudo ip netns`
-| `sudo ip netns exec <router2-namespace> bash`
-| `ssh cirros@<ip-address-of-the-image>`
-
-| Note: default password of cirros image would be "cubswin:)"
-
-| Verify that Cirros image has an IPv6 address assigned via SLAAC with a prefix of "2001:db8:0:2::/64"
-| `ip address`
-| # verify that default route points to the LLA of enp0s8 interface of vRouter.
-| `ip -6 route`
-
-| Try pinging to the internal router interface of router1 (i.e., 2001:db8:0:1::1/64)
-| `ping6 2001:db8:0:1::1/64`
-
-| If all goes well, ping6 should succeed which shows that vRouter is forwarding the IPv6 traffic of instances on the tenant-internal-network.
-
-| At this state, we can create a snapshot of the CentOSvRouter and use it in any other similar OpenStack setup.
-| `nova image-create <CentOSvRouter-id> <Snapshot-name>`
-| `nova image-list #You will find the snapshot you just created above.`
-
diff --git a/vrouter/setup_service_vm.rst b/vrouter/setup_service_vm.rst deleted file mode 100644 index a9c0a87..0000000 --- a/vrouter/setup_service_vm.rst +++ /dev/null @@ -1,198 +0,0 @@ -================================================
-Set up a Service VM Running as a vRouter (SLAAC)
-================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/radvd.conf
-| interface enp0s8
-| {
-| # This is the primary "on switch" for RADVD
-| AdvSendAdvert on;
-| #
-| # These settings determine how often advertisements will be sent every X-Y.
-| # X and Y are in seconds.
-| # With these settings you will be sending a advert every 60 seconds
-| #
-| MinRtrAdvInterval 60;
-| MaxRtrAdvInterval 180;
-| #
-| # Disable Mobile IPv6 support
-| #
-| AdvHomeAgentFlag off;
-| #
-| # Here we set our managed flags
-| #
-| AdvManagedFlag on;
-| AdvOtherConfigFlag on;
-| #
-| # Enter our IPv6 prefix and CIDR
-| #
-| prefix 2001:db8:0:2::/64
-| {
-| AdvOnLink on;
-| # On link tells the host that the default router is on the same "link" as it is
-| AdvAutonomous on;
-| AdvRouterAddr off;
-| };
-| };
-
-# Enable radvd service
-systemctl enable radvd
-
-# In /etc/sysconfig/network add
-IPV6FORWARDING=yes
-
-=================================================================
-Set up a Service VM Running as a vRouter (DHCPv6 Stateful Server)
-=================================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/dhcp/dhcpd6.conf
-| # DHCP for IPv6 Server Configuration file.
-
-| # Enable RFC 5007 support (same than for DHCPv4)
- allow leasequery;
-
-| # IPv6 address valid lifetime
-| # (at the end the address is no longer usable by the client)
-| # (set to 30 days, the usual IPv6 default)
-| default-lease-time 2592000;
-
-| # IPv6 address preferred lifetime
-| # (at the end the address is deprecated, i.e., the client should use
-| # other addresses for new connections)
-| # (set to 7 days, the usual IPv6 default)
-| preferred-lifetime 604800;
-
-| # T1, the delay before Renew
-| # (default is 1/2 preferred lifetime)
-| # (set to 1 hour)
-| option dhcp-renewal-time 3600;
-
-| # T2, the delay before Rebind (if Renews failed)
-| # (default is 3/4 preferred lifetime)
-| # (set to 2 hours)
-| option dhcp-rebinding-time 7200;
-
-| # The path of the lease file
-| dhcpv6-lease-file-name "/var/lib/dhcpd/dhcpd6.leases";
-
-| # Set preference to 255 (maximum) in order to avoid waiting for
-| # additional servers when there is only one
-| option dhcp6.preference 255;
-
-| # Server side command to enable rapid-commit (2 packet exchange)
-| option dhcp6.rapid-commit;
-
-| # The delay before information-request refresh
-| # (minimum is 10 minutes, maximum one day, default is to not refresh)
-| # (set to 6 hours)
- option dhcp6.info-refresh-time 21600;
-
-| # Set this to `interim` when doing ddns updates
-| ddns-update-style interim;
-|
-| subnet6 2001:db8:0:2::/64 {
-| option dhcp6.name-servers 2001:db8:0:2::1;
-| option dhcp6.domain-search "opnfv.local";
-| ddns-hostname = concat(binary-to-ascii(10, 8, "-", leased-address), ".wired");
-| ddns-domainname = "opnfv.local";
-| # Our address range 1000 through 1fff
-| range6 2001:db8:0:2::1000 2001:db8:0:2::1fff;
-| }
-|
-| # In /etc/sysconfig/network add
-| IPV6FORWARDING=yes
-
-For reference, refer to `How to set up RADVd DHCPv6 and DNS on CentOS 6`_.
-
-.. _`How to set up RADVd DHCPv6 and DNS on CentOS 6`: http://www.percula.info/archives/196
-
diff --git a/vrouter/setup_service_vm.txt b/vrouter/setup_service_vm.txt deleted file mode 100644 index a9c0a87..0000000 --- a/vrouter/setup_service_vm.txt +++ /dev/null @@ -1,198 +0,0 @@ -================================================
-Set up a Service VM Running as a vRouter (SLAAC)
-================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/radvd.conf
-| interface enp0s8
-| {
-| # This is the primary "on switch" for RADVD
-| AdvSendAdvert on;
-| #
-| # These settings determine how often advertisements will be sent every X-Y.
-| # X and Y are in seconds.
-| # With these settings you will be sending a advert every 60 seconds
-| #
-| MinRtrAdvInterval 60;
-| MaxRtrAdvInterval 180;
-| #
-| # Disable Mobile IPv6 support
-| #
-| AdvHomeAgentFlag off;
-| #
-| # Here we set our managed flags
-| #
-| AdvManagedFlag on;
-| AdvOtherConfigFlag on;
-| #
-| # Enter our IPv6 prefix and CIDR
-| #
-| prefix 2001:db8:0:2::/64
-| {
-| AdvOnLink on;
-| # On link tells the host that the default router is on the same "link" as it is
-| AdvAutonomous on;
-| AdvRouterAddr off;
-| };
-| };
-
-# Enable radvd service
-systemctl enable radvd
-
-# In /etc/sysconfig/network add
-IPV6FORWARDING=yes
-
-=================================================================
-Set up a Service VM Running as a vRouter (DHCPv6 Stateful Server)
-=================================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/dhcp/dhcpd6.conf
-| # DHCP for IPv6 Server Configuration file.
-
-| # Enable RFC 5007 support (same than for DHCPv4)
- allow leasequery;
-
-| # IPv6 address valid lifetime
-| # (at the end the address is no longer usable by the client)
-| # (set to 30 days, the usual IPv6 default)
-| default-lease-time 2592000;
-
-| # IPv6 address preferred lifetime
-| # (at the end the address is deprecated, i.e., the client should use
-| # other addresses for new connections)
-| # (set to 7 days, the usual IPv6 default)
-| preferred-lifetime 604800;
-
-| # T1, the delay before Renew
-| # (default is 1/2 preferred lifetime)
-| # (set to 1 hour)
-| option dhcp-renewal-time 3600;
-
-| # T2, the delay before Rebind (if Renews failed)
-| # (default is 3/4 preferred lifetime)
-| # (set to 2 hours)
-| option dhcp-rebinding-time 7200;
-
-| # The path of the lease file
-| dhcpv6-lease-file-name "/var/lib/dhcpd/dhcpd6.leases";
-
-| # Set preference to 255 (maximum) in order to avoid waiting for
-| # additional servers when there is only one
-| option dhcp6.preference 255;
-
-| # Server side command to enable rapid-commit (2 packet exchange)
-| option dhcp6.rapid-commit;
-
-| # The delay before information-request refresh
-| # (minimum is 10 minutes, maximum one day, default is to not refresh)
-| # (set to 6 hours)
- option dhcp6.info-refresh-time 21600;
-
-| # Set this to `interim` when doing ddns updates
-| ddns-update-style interim;
-|
-| subnet6 2001:db8:0:2::/64 {
-| option dhcp6.name-servers 2001:db8:0:2::1;
-| option dhcp6.domain-search "opnfv.local";
-| ddns-hostname = concat(binary-to-ascii(10, 8, "-", leased-address), ".wired");
-| ddns-domainname = "opnfv.local";
-| # Our address range 1000 through 1fff
-| range6 2001:db8:0:2::1000 2001:db8:0:2::1fff;
-| }
-|
-| # In /etc/sysconfig/network add
-| IPV6FORWARDING=yes
-
-For reference, refer to `How to set up RADVd DHCPv6 and DNS on CentOS 6`_.
-
-.. _`How to set up RADVd DHCPv6 and DNS on CentOS 6`: http://www.percula.info/archives/196
-
|