diff options
Diffstat (limited to 'vrouter/setup_service_vm.txt')
| -rw-r--r-- | vrouter/setup_service_vm.txt | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/vrouter/setup_service_vm.txt b/vrouter/setup_service_vm.txt deleted file mode 100644 index a9c0a87..0000000 --- a/vrouter/setup_service_vm.txt +++ /dev/null @@ -1,198 +0,0 @@ -================================================
-Set up a Service VM Running as a vRouter (SLAAC)
-================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/radvd.conf
-| interface enp0s8
-| {
-| # This is the primary "on switch" for RADVD
-| AdvSendAdvert on;
-| #
-| # These settings determine how often advertisements will be sent every X-Y.
-| # X and Y are in seconds.
-| # With these settings you will be sending a advert every 60 seconds
-| #
-| MinRtrAdvInterval 60;
-| MaxRtrAdvInterval 180;
-| #
-| # Disable Mobile IPv6 support
-| #
-| AdvHomeAgentFlag off;
-| #
-| # Here we set our managed flags
-| #
-| AdvManagedFlag on;
-| AdvOtherConfigFlag on;
-| #
-| # Enter our IPv6 prefix and CIDR
-| #
-| prefix 2001:db8:0:2::/64
-| {
-| AdvOnLink on;
-| # On link tells the host that the default router is on the same "link" as it is
-| AdvAutonomous on;
-| AdvRouterAddr off;
-| };
-| };
-
-# Enable radvd service
-systemctl enable radvd
-
-# In /etc/sysconfig/network add
-IPV6FORWARDING=yes
-
-=================================================================
-Set up a Service VM Running as a vRouter (DHCPv6 Stateful Server)
-=================================================================
-
-| # Current network setup for IPv6 router VM on local virtualbox setup
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3
-| # Network interface enp0s3 is IPv4 for public internet access
-| TYPE="Ethernet"
-| BOOTPROTO="dhcp"
-| DEFROUTE="yes"
-| PEERDNS="yes"
-| PEERROUTES="yes"
-| IPV4_FAILURE_FATAL="no"
-| IPV6INIT="yes"
-| IPV6_AUTOCONF="yes"
-| IPV6_DEFROUTE="yes"
-| IPV6_PEERDNS="yes"
-| IPV6_PEERROUTES="yes"
-| IPV6_FAILURE_FATAL="no"
-| NAME="enp0s3"
-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"
-| DEVICE="enp0s3"
-| ONBOOT="yes"
-
-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8
-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts
-| BOOTPROTO=static
-| IPV6INIT=yes
-| IPV6ADDR="2001:db8:0:2::1/64"
-| NAME=enp0s8
-| UUID=e931a806-2f76-425d-b035-d37813b81df5
-| DEVICE=enp0s8
-| ONBOOT=yes
-| NM_CONTROLLED=no
-
-| # Disable NetworkManager
-| systemctl disable NetworkManager
-
-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed
-| yum install dhcp-common
-| yum install dhcp
-| yum install radvd
-
-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding
-| net.ipv6.conf.all.forwarding=1
-| net.ipv6.conf.enp0s3.accept_ra=2
-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1
-| net.ipv6.conf.enp0s3.router_solicitations=1
-
-| # /etc/dhcp/dhcpd6.conf
-| # DHCP for IPv6 Server Configuration file.
-
-| # Enable RFC 5007 support (same than for DHCPv4)
- allow leasequery;
-
-| # IPv6 address valid lifetime
-| # (at the end the address is no longer usable by the client)
-| # (set to 30 days, the usual IPv6 default)
-| default-lease-time 2592000;
-
-| # IPv6 address preferred lifetime
-| # (at the end the address is deprecated, i.e., the client should use
-| # other addresses for new connections)
-| # (set to 7 days, the usual IPv6 default)
-| preferred-lifetime 604800;
-
-| # T1, the delay before Renew
-| # (default is 1/2 preferred lifetime)
-| # (set to 1 hour)
-| option dhcp-renewal-time 3600;
-
-| # T2, the delay before Rebind (if Renews failed)
-| # (default is 3/4 preferred lifetime)
-| # (set to 2 hours)
-| option dhcp-rebinding-time 7200;
-
-| # The path of the lease file
-| dhcpv6-lease-file-name "/var/lib/dhcpd/dhcpd6.leases";
-
-| # Set preference to 255 (maximum) in order to avoid waiting for
-| # additional servers when there is only one
-| option dhcp6.preference 255;
-
-| # Server side command to enable rapid-commit (2 packet exchange)
-| option dhcp6.rapid-commit;
-
-| # The delay before information-request refresh
-| # (minimum is 10 minutes, maximum one day, default is to not refresh)
-| # (set to 6 hours)
- option dhcp6.info-refresh-time 21600;
-
-| # Set this to `interim` when doing ddns updates
-| ddns-update-style interim;
-|
-| subnet6 2001:db8:0:2::/64 {
-| option dhcp6.name-servers 2001:db8:0:2::1;
-| option dhcp6.domain-search "opnfv.local";
-| ddns-hostname = concat(binary-to-ascii(10, 8, "-", leased-address), ".wired");
-| ddns-domainname = "opnfv.local";
-| # Our address range 1000 through 1fff
-| range6 2001:db8:0:2::1000 2001:db8:0:2::1fff;
-| }
-|
-| # In /etc/sysconfig/network add
-| IPV6FORWARDING=yes
-
-For reference, refer to `How to set up RADVd DHCPv6 and DNS on CentOS 6`_.
-
-.. _`How to set up RADVd DHCPv6 and DNS on CentOS 6`: http://www.percula.info/archives/196
-
|