diff options
Diffstat (limited to 'docs')
3 files changed, 72 insertions, 14 deletions
diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst index 1685f68..cf70d76 100644 --- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst @@ -364,19 +364,39 @@ interface of ``vRouter`` automatically configures an IPv6 SLAAC address. Testing to Verify Setup Complete ******************************** -Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address -using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``. +Now, let us ``SSH`` to those VMs, e.g. VM1 and / or VM2 and / or vRouter, to confirm that +it has successfully configured the IPv6 address using ``SLAAC`` with prefix +``2001:db8:0:2::/64`` from ``vRouter``. -Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command. +We use ``floatingip`` mechanism to achieve ``SSH``. -**SETUP-SVM-31**: ``ssh`` VM1 +**SETUP-SVM-31**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash - ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address> + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net -If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify -that IPv6 addresses are configured on ``eth0`` interface. + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' + + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> + +If everything goes well, ``ssh`` will be successful and you will be logged into those VMs. +Run some commands to verify that IPv6 addresses are configured on ``eth0`` interface. **SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64`` diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst index afc064c..f7ae344 100644 --- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst +++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst @@ -330,9 +330,28 @@ to know the IPv6 addresses that would be assigned to the port). VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 -**OS-NATIVE-SETUP-18**: To ``SSH`` to vRouter, you can execute the following command. +**OS-NATIVE-SETUP-18**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash - sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111 + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net + + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' + + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst index 076e1f6..d042687 100644 --- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst @@ -195,9 +195,28 @@ to know the IPv6 addresses that would be assigned to the port). VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 -**SCENARIO-3-SETUP-18**: To ``SSH`` to vRouter, you can execute the following command. - -.. code-block:: bash - - sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111 +**SCENARIO-3-SETUP-18**: Now we can ``SSH`` to VMs. You can execute the following command. + +.. code-block:: bash + + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net + + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' + + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> |