diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configguide/featureconfig.rst | 9 | ||||
| -rw-r--r-- | docs/reldoc/index.rst | 9 |
2 files changed, 12 insertions, 6 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst index 928e675..c27a623 100644 --- a/docs/configguide/featureconfig.rst +++ b/docs/configguide/featureconfig.rst @@ -267,7 +267,7 @@ would be as shown as follows: **OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller +nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-5** could be in any of the controller node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to enter the ``ipv6-router`` namespace. The following command in Neutron will display the controller on which the ``ipv6-router`` is spawned. @@ -382,8 +382,11 @@ that the method of sourcing tenant credentials may vary depending on installers. Informational Note: Move Public Network from Physical Network Interface to ``br-ex`` ------------------------------------------------------------------------------------ -**This Step is Informational. OPNFV Installer has taken care of this Step during deployment. -You may refer to this Step only if there is any issue, or if you are using other installers**. +**SETUP-SVM-3**: Move the physical interface (i.e. the public network interface) to ``br-ex`` +**SETUP-SVM-4**: Verify setup of ``br-ex`` + +**Those 2 steps are Informational. OPNFV Installer has taken care of those 2 steps during deployment. +You may refer to this step only if there is any issue, or if you are using other installers**. We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and diff --git a/docs/reldoc/index.rst b/docs/reldoc/index.rst index 1e4f9af..b3fbcba 100644 --- a/docs/reldoc/index.rst +++ b/docs/reldoc/index.rst @@ -267,7 +267,7 @@ would be as shown as follows: **OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller +nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-5** could be in any of the controller node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to enter the ``ipv6-router`` namespace. The following command in Neutron will display the controller on which the ``ipv6-router`` is spawned. @@ -382,8 +382,11 @@ that the method of sourcing tenant credentials may vary depending on installers. Informational Note: Move Public Network from Physical Network Interface to ``br-ex`` ------------------------------------------------------------------------------------ -**This Step is Informational. OPNFV Installer has taken care of this Step during deployment. -You may refer to this Step only if there is any issue, or if you are using other installers**. +**SETUP-SVM-3**: Move the physical interface (i.e. the public network interface) to ``br-ex`` +**SETUP-SVM-4**: Verify setup of ``br-ex`` + +**Those 2 steps are Informational. OPNFV Installer has taken care of those 2 steps during deployment. +You may refer to this step only if there is any issue, or if you are using other installers**. We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and |