diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/how-to-use-docs/documentation-example.rst | 5 | ||||
| -rw-r--r-- | docs/setupservicevm/ipv6-configguide.rst | 176 |
2 files changed, 164 insertions, 17 deletions
diff --git a/docs/how-to-use-docs/documentation-example.rst b/docs/how-to-use-docs/documentation-example.rst index 5f75db5..3c57738 100644 --- a/docs/how-to-use-docs/documentation-example.rst +++ b/docs/how-to-use-docs/documentation-example.rst @@ -5,9 +5,8 @@ :alt: OPNFV :align: left .. these two pipes are to seperate the logo from the first title -| - -| + | + | How to create documentation for your OPNFV project ================================================== diff --git a/docs/setupservicevm/ipv6-configguide.rst b/docs/setupservicevm/ipv6-configguide.rst index 3add5c6..0d32a03 100644 --- a/docs/setupservicevm/ipv6-configguide.rst +++ b/docs/setupservicevm/ipv6-configguide.rst @@ -2,28 +2,30 @@ Setting Up a Service VM as an IPv6 vRouter ========================================== -After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10 +After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 11 steps to set up a service VM as an IPv6 vRouter: - Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_ - Step 1: `Start Open Daylight`_ -- Step 2: `Start Open Stack`_ +- Step 2: `Start Open Stack on Controller Node`_ -- Step 3: `Create External Network Connectivity ext-net`_ +- Step 3: `Start Open Stack on Compute Node`_ -- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_ +- Step 4: `Create External Network Connectivity ext-net`_ -- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_ +- Step 5: `Create IPv4 Subnet and Router with External Connectivity`_ -- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_ +- Step 6: `Create IPv6 Subnet and Router with External Connectivity`_ -- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_ +- Step 7: `Prepare Image, Metadata and Keypair for Service VM`_ -- Step 8: `Spawn RADVD in vRouter`_ +- Step 8: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_ -- Step 9: `Testing to Verify Setup Complete`_ +- Step 9: `Spawn RADVD in vRouter`_ + +- Step 10: `Testing to Verify Setup Complete`_ Once the setup is complete, you can go to `Next Steps`_. @@ -42,13 +44,159 @@ If you have chosen to enable neutron-l3-agent during installation, please skip t _`Start Open Daylight` ********************** -# Place holder for instructions of how to start Open Daylight +ODL-1: Login to Open Daylight Controller Node. For the purpose of example, we use ''opnfv'' as username of login, and ''opnfv-odl-controller'' as hostname of the Open Daylight Controller Node. + +ODL-2: Start a new terminal session, and change directory to where Open Daylight is installed. Here we use ''odl'' directory name and ''Lithium SR2'' installation as an example. + + cd ~/odl/distribution-karaf-0.3.2-Lithium-SR2/bin + +ODL-3: Run the ''karaf'' shell: + + ./karaf + +ODL-4: You are now in the Karaf shell of Open Daylight. To explore the list of available features you can execute +''feature:list''. In order to enable Open Daylight with Open Stack, you have to load the ''odl-ovsdb-openstack'' +feature. + + opendaylight-user@opnfv>feature:install odl-ovsdb-openstack + +ODL-5: Verify that OVSDB feature is installed successfully. + + opendaylight-user@opnfv>feature:list -i | grep ovsdb + odl-ovsdb-openstack | 1.1.1-Lithium-SR1 | x | ovsdb-1.1.1-Lithium-SR1 | OpenDaylight :: OVSDB :: OpenStack Network Virtual + odl-ovsdb-southbound-api | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: api + odl-ovsdb-southbound-impl | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: impl + odl-ovsdb-southbound-impl-rest|1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: REST + odl-ovsdb-southbound-impl-ui | 1.1.1-Lithium-SR1| x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: UI + opendaylight-user@opnfv> + +ODL-6: To view the logs, you can use the following commands (or alternately the file data/log/karaf.log). + + opendaylight-user@opnfv>log:display + opendaylight-user@opnfv>log:tail + +ODL-7: To enable ODL DLUX UI, install the following features. Then you can navigate to http://localhost:8181/index.html +for DLUX UI. The default user-name and password is admin/admin. + + opendaylight-user@opnfv>feature:install odl-restconf odl-l2switch-switch odl-mdsal-apidocs odl-dlux-core + +ODL-8: To exit out of screen session, please use the command ''CTRL+a'' followed by ''d'' + +''**Note: Do not kill the screen session, it will terminate the ODL controller.**'' + +At this moment, Open Daylight has been started successfully. + +******************************** +_`Start Open Stack on Controller Node` +******************************** + +OS-N-1: Login to Open Stack Controller Node. For the purpose of example, we use ''opnfv'' as username of login, and +''opnfv-os-controller'' as hostname of the Open Stack Controller Node. + +OS-N-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ''devstack'' directory +name as an example. + + cd ~/devstack + +OS-N-3: Create a ''local.conf'' file with the contents from the following URL. + + http://fpaste.org/276949/39476214/ + +Note 1: You need to change the value of ''BRANCH'', and all appearance of ''stable/kilo'' and related URL to point to +the actual branch of your upstream repository. + +Note 2: you need to change the IP address of ''ODL_MGR_IP'' to point to your actual IP address of Open Daylight Controller. + +Note 3: You may have to change the value of ''ODL_PROVIDER_MAPPINGS'' and ''PUBLIC_INTERFACE'' to match your actual +network interfaces. + +OS-N-4: Initiate Openstack setup by invoking ''stack.sh'' + + ./stack.sh + +OS-N-5: If the setup is successful you would see the following logs on the console. Please note that the IP addresses are +all for the purpose of example. Your IP addresses will match the ones assigned during the installation of OPNFV B Release +base platform in prior chapters. + + This is your host ip: 198.59.156.113 + Horizon is now available at http://198.59.156.113/ + Keystone is serving at http://198.59.156.113:5000/ + The default users are: admin and demo + The password: password + +OS-N-6: Assuming that all goes well, you can set ''OFFLINE=True'' and ''RECLONE=no'' in ''local.conf'' to lock the codebase. +Devstack uses these configuration parameters to determine if it has to run with the existing codebase or update to the latest copy. + +OS-N-7: Source the credentials. + + opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo + +OS-N-8: Verify some commands to check if setup is working fine. + + opnfv@opnfv-os-controller:~/devstack$ nova flavor-list + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | + | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | + | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | + | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | + | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + +Now you can start the Compute node setup. + +******************************* +_`Start Open Stack on Compute Node` +******************************* + +OS-M-1: Login to Open Stack Compute Node. For the purpose of example, we use ''opnfv'' as username of login, and +''opnfv-os-compute'' as hostname of the Open Stack Compute Node. + +OS-M-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ''devstack'' +directory name as an example. + + cd ~/devstack + +OS-M-3: Create a ''local.conf'' file with the contents from the following URL. + + http://fpaste.org/276958/44395955/ + +Note 1: You need to change the value of ''BRANCH'', and all appearance of ''stable/kilo'' and related URL to point to +the actual branch of your upstream repository. + +Note 2: you need to change the IP address of ''SERVICE_HOST'' to point to your actual IP address of Open Stack Controller. + +Note 3: you need to change the IP address of ''ODL_MGR_IP'' to point to your actual IP address of Open Daylight Controller. + +Note 4: You may have to change the value of ''ODL_PROVIDER_MAPPINGS'' and ''PUBLIC_INTERFACE'' to match your actual +network interface. + +OS-M-4: Initiate Openstack setup by invoking ''stack.sh'' + + ./stack.sh + +OS-M-5: Assuming that all goes well, you can set ''OFFLINE=True'' and ''RECLONE=no'' in ''local.conf'' to lock the codebase. +Devstack uses these configuration parameters to determine if it has to run with the existing codebase or update to the latest copy. + +OS-M-6: Source the credentials. + + opnfv@opnfv-os-compute:~/devstack$ source openrc admin demo + +OS-M-7:Verify some commands to check if setup is working fine. -******************* -_`Start Open Stack` -******************* + opnfv@opnfv-os-compute:~/devstack$ nova flavor-list + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | + | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | + | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | + | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | + | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ -# Place holder for instructions of how to start Open Stack +Now you can start to set up the service VM as an Ipv6 vRouter in the environment of Open Stack and Open Daylight. *********************************************** _`Create External Network Connectivity ext-net` |