1 files changed, 10 insertions, 5 deletions
diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst
index 4bdf5e4..7a508bd 100644
--- a/docs/configguide/ipv6-configguide.rst
+++ b/docs/configguide/ipv6-configguide.rst
@@ -2,7 +2,8 @@
 Setting Up a Service VM as an IPv6 vRouter
 ==========================================
 
-After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10 steps to set up a service VM as an IPv6 vRouter:
+After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10
+steps to set up a service VM as an IPv6 vRouter:
 
 - Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_
 
@@ -11,7 +12,7 @@ After OPNFV Brahmaputra Release base platform has been successfully installed th
 - Step 2: `Start Open Stack`_
 
 - Step 3: `Create External Network Connectivity ext-net`_
- 
+
 - Step 4: `Create IPv4 Subnet and Router with External Connectivity`_
 
 - Step 5: `Create IPv6 Subnet and Router with External Connectivity`_
@@ -30,7 +31,8 @@ Once the setup is complete, you can go to `Next Steps`_.
 _`Disable odl-l3 and Enable neutron-l3-agent`
 *********************************************
 
-This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of OPNFV Brahmaputra Release.
+This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of
+OPNFV Brahmaputra Release.
 
 If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1.
 
@@ -76,7 +78,8 @@ _`Prepare Image, Metadata and Keypair for Service VM`
 _`Boot Service VM (vRouter) and other VMs in IPv6 Subnet`
 *********************************************************
 
-# Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same IPv6 subnet for testing purpose
+# Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same Ipv6
+subnet for testing purpose
 
 *************************
 _`Spawn RADVD in vRouter`
@@ -94,5 +97,7 @@ _`Testing to Verify Setup Complete`
 _`Next Steps`
 *************
 
-Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this IPv6 vRouter.
+Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
+open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this
+IPv6 vRouter.