diff options
Diffstat (limited to 'docs/setupservicevm')
3 files changed, 16 insertions, 6 deletions
diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst index 8d0cd9c..0868178 100644 --- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst @@ -41,8 +41,11 @@ Because we need to manually create networks/subnets to achieve the IPv6 vRouter, ``NEUTRON_CREATE_INITIAL_NETWORKS=False`` in ``local.conf`` file. When this flag is set to False, ``devstack`` does not create any networks/subnets during the setup phase. -Now we have to move the public network from physical network interface to ``br-ex``, -including moving the public IP address and setting up default route. +Now we have to move the physical interface (i.e. the public network interface) to ``br-ex``, +including moving the public IP address and setting up default route. **Please note that this step +may already have been done when you use a different installer to deploy OpenStack because that installer +may have already moved the physical interface to** ``br-ex`` **during deployment**. + In OpenStack Controller Node ``opnfv-os-controller``, ``eth1`` is configured to provide external/public connectivity for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the default route from ``eth1`` to ``br-ex``. diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst index 00667bb..d020521 100644 --- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst +++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst @@ -161,6 +161,9 @@ configuration parameters. **OS-NATIVE-SEC-3**: After updating the settings, you will have to restart the ``Neutron`` and ``Nova`` services. +**Please note that the commands of restarting ``Neutron`` and ``Nova`` would vary depending on the installer. +Please refer to relevant documentation of specific installers** + ********************************* Set Up Service VM as IPv6 vRouter ********************************* @@ -197,8 +200,10 @@ the following command may be used for some other installers: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**OS-NATIVE-SETUP-4**: Now we have to move the public network from physical network -interface to ``br-ex``, including moving the public IP address and setting up default route. +**OS-NATIVE-SETUP-4**: Now We have to move the physical interface (i.e. the public network interface) +to ``br-ex``, including moving the public IP address and setting up default route. **Please note that this step +may already have been done when you use a different installer to deploy OpenStack because that installer +may have already moved the physical interface to** ``br-ex`` **during deployment**. Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst index 6595cc6..5be5228 100644 --- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst @@ -36,8 +36,10 @@ Please **NOTE** that the method of sourcing tenant credentials may vary dependin glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**SCENARIO-3-SETUP-4**: Now we have to move the public network from physical network -interface to ``br-ex``, including moving the public IP address and setting up default route. +**SCENARIO-3-SETUP-4**: Now we have to move the physical interface (i.e. the public network interface) +to ``br-ex``, including moving the public IP address and setting up default route. **Please note that this step +may already have been done when you use a different installer to deploy OpenStack because that installer +may have already moved the physical interface to** ``br-ex`` **during deployment**. Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. |