diff options
Diffstat (limited to 'docs/setupservicevm')
7 files changed, 75 insertions, 36 deletions
diff --git a/docs/setupservicevm/2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/2-ipv6-configguide-os-controller.rst index 050be79..d9dc2f1 100644 --- a/docs/setupservicevm/2-ipv6-configguide-os-controller.rst +++ b/docs/setupservicevm/2-ipv6-configguide-os-controller.rst @@ -90,6 +90,9 @@ the existing codebase or update to the latest copy. opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-N-10**: Verify some commands to check if setup is working fine. .. code-block:: bash diff --git a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst index a27ae4c..04594c8 100644 --- a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst +++ b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst @@ -87,6 +87,9 @@ configuration parameters to determine if it has to run with the existing codebas opnfv@opnfv-os-compute:~/devstack$ source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-M-9**: You can verify that OpenStack is set up correctly by showing hypervisor list .. code-block:: bash diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst index 61412e1..8d0cd9c 100644 --- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst @@ -30,6 +30,9 @@ Start a new terminal, and change directory to where OpenStack is installed. opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + ************************************** Add External Connectivity to ``br-ex`` ************************************** @@ -38,6 +41,8 @@ Because we need to manually create networks/subnets to achieve the IPv6 vRouter, ``NEUTRON_CREATE_INITIAL_NETWORKS=False`` in ``local.conf`` file. When this flag is set to False, ``devstack`` does not create any networks/subnets during the setup phase. +Now we have to move the public network from physical network interface to ``br-ex``, +including moving the public IP address and setting up default route. In OpenStack Controller Node ``opnfv-os-controller``, ``eth1`` is configured to provide external/public connectivity for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the default route from ``eth1`` to ``br-ex``. diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst index 24899da..55dd241 100644 --- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst +++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst @@ -158,18 +158,31 @@ configuration parameters. security_group_api = nova firewall_driver = nova.virt.firewall.NoopFirewallDriver +**OS-NATIVE-SEC-3**: After updating the settings, you will have to restart the +``Neutron`` and ``Nova`` services. + ********************************* Set Up Service VM as IPv6 vRouter ********************************* -**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following -commands should be executed: +**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. +We have to source the tenant credentials in this step. The following commands should be executed +in ``devstack``: .. code-block:: bash + # source the tenant credentials in devstack cd ~/devstack source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example, +the following command may be used for some other installers: + + # source the tenant credentials in some other installers + source /opt/admin-openrc.sh + +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` .. code-block:: bash @@ -182,22 +195,10 @@ commands should be executed: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**OS-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external -connectivity. - -.. code-block:: bash - - neutron router-create ipv4-router - neutron router-create ipv6-router - -**OS-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using the appropriate values based on the -data-center physical network setup. - -.. code-block:: bash - - neutron net-create --router:external ext-net +**OS-NATIVE-SETUP-4**: Now we have to move the public network from physical network +interface to ``br-ex``, including moving the public IP address and setting up default route. -**OS-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, +Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command @@ -211,9 +212,8 @@ below are for exemplary purpose. **Please replace them with the IP addresses of sudo ip addr add 198.59.156.113/24 dev br-ex sudo ifconfig br-ex up sudo ip route add default via 198.59.156.1 dev br-ex - neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 -**OS-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on +**OS-NATIVE-SETUP-5**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on ``br-ex`` .. code-block:: bash @@ -234,6 +234,22 @@ below are for exemplary purpose. **Please replace them with the IP addresses of Please note that the IP addresses above are exemplary purpose. +**OS-NATIVE-SETUP-6**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external +connectivity. + +.. code-block:: bash + + neutron router-create ipv4-router + neutron router-create ipv6-router + +**OS-NATIVE-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the +data-center physical network setup. + +.. code-block:: bash + + neutron net-create --router:external ext-net + neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 + **OS-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2`` with port_security disabled diff --git a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst index d1af395..37bbfcb 100644 --- a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst +++ b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst @@ -94,6 +94,9 @@ the existing codebase or update to the latest copy. opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-N-10**: Verify some commands to check if setup is working fine. .. code-block:: bash diff --git a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst index 34af6b2..2f875ab 100644 --- a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst +++ b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst @@ -89,6 +89,9 @@ configuration parameters to determine if it has to run with the existing codebas opnfv@opnfv-os-compute:~/devstack$ source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-M-9**: You can verify that OpenStack is set up correctly by showing hypervisor list .. code-block:: bash diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst index 6e673ca..6595cc6 100644 --- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst @@ -21,6 +21,9 @@ commands should be executed: cd ~/devstack source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **SCENARIO-3-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` .. code-block:: bash @@ -33,22 +36,10 @@ commands should be executed: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**SCENARIO-3-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external -connectivity. - -.. code-block:: bash - - neutron router-create ipv4-router - neutron router-create ipv6-router - -**SCENARIO-3-SETUP-5**: Create an external network/subnet ``ext-net`` using the appropriate values based on the -data-center physical network setup. - -.. code-block:: bash +**SCENARIO-3-SETUP-4**: Now we have to move the public network from physical network +interface to ``br-ex``, including moving the public IP address and setting up default route. - neutron net-create --router:external ext-net - -**SCENARIO-3-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, +Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command @@ -62,9 +53,8 @@ below are for exemplary purpose. **Please replace them with the IP addresses of sudo ip addr add 198.59.156.113/24 dev br-ex sudo ifconfig br-ex up sudo ip route add default via 198.59.156.1 dev br-ex - neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 -**SCENARIO-3-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on +**SCENARIO-3-SETUP-5**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on ``br-ex`` .. code-block:: bash @@ -85,6 +75,22 @@ below are for exemplary purpose. **Please replace them with the IP addresses of Please note that the IP addresses above are exemplary purpose. +**SCENARIO-3-SETUP-6**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external +connectivity. + +.. code-block:: bash + + neutron router-create ipv4-router + neutron router-create ipv6-router + +**SCENARIO-3-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the +data-center physical network setup. + +.. code-block:: bash + + neutron net-create --router:external ext-net + neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 + **SCENARIO-3-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2`` with port_security disabled |