diff options
Diffstat (limited to 'docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst')
| -rw-r--r-- | docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst | 40 |
1 files changed, 23 insertions, 17 deletions
diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst index 6e673ca..6595cc6 100644 --- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst @@ -21,6 +21,9 @@ commands should be executed: cd ~/devstack source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +**Please refer to relevant documentation of installers if you encounter any issue**. + **SCENARIO-3-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` .. code-block:: bash @@ -33,22 +36,10 @@ commands should be executed: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**SCENARIO-3-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external -connectivity. - -.. code-block:: bash - - neutron router-create ipv4-router - neutron router-create ipv6-router - -**SCENARIO-3-SETUP-5**: Create an external network/subnet ``ext-net`` using the appropriate values based on the -data-center physical network setup. - -.. code-block:: bash +**SCENARIO-3-SETUP-4**: Now we have to move the public network from physical network +interface to ``br-ex``, including moving the public IP address and setting up default route. - neutron net-create --router:external ext-net - -**SCENARIO-3-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, +Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command @@ -62,9 +53,8 @@ below are for exemplary purpose. **Please replace them with the IP addresses of sudo ip addr add 198.59.156.113/24 dev br-ex sudo ifconfig br-ex up sudo ip route add default via 198.59.156.1 dev br-ex - neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 -**SCENARIO-3-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on +**SCENARIO-3-SETUP-5**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on ``br-ex`` .. code-block:: bash @@ -85,6 +75,22 @@ below are for exemplary purpose. **Please replace them with the IP addresses of Please note that the IP addresses above are exemplary purpose. +**SCENARIO-3-SETUP-6**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external +connectivity. + +.. code-block:: bash + + neutron router-create ipv4-router + neutron router-create ipv6-router + +**SCENARIO-3-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the +data-center physical network setup. + +.. code-block:: bash + + neutron net-create --router:external ext-net + neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 + **SCENARIO-3-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2`` with port_security disabled |