summaryrefslogtreecommitdiffstats
path: root/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst')
-rw-r--r--docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst20
1 files changed, 20 insertions, 0 deletions
diff --git a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
index 371a018..930dbc5 100644
--- a/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
+++ b/docs/setupservicevm/scenario-3-4-ipv6-configguide-servicevm.rst
@@ -13,6 +13,26 @@ Now we can start to set up a service VM as an IPv6 vRouter. For exemplary purpos
* We use ``devstack`` to install OpenStack Kilo, and the directory is ``~/devstack``
* Note: all IP addresses as shown below are for exemplary purpose.
+****************************************************
+Note: Disable Security Groups in OpenStack ML2 Setup
+****************************************************
+
+Please note that Security Groups feature has been disabled automatically through ``local.conf`` configuration file
+during the setup procedure of OpenStack in both
+`Controller Node <./scenario-3-2-ipv6-configguide-os-controller.html>`_
+and `Compute Node <./scenario-3-3-ipv6-configguide-os-compute.html>`_ using ``devstack``.
+
+If you are installing OpenStack using a different installer (i.e. not with ``devstack``), please make sure
+that Security Groups are disabled in the setup.
+
+**Please refer to**
+`here <./5-ipv6-configguide-scenario-1-native-os.html#note-disable-security-groups-in-openstack-ml2-setup>_`
+**for the notes in** ``Section 2.4``, **steps** ``OS-NATIVE-SEC-1`` **through** ``OS-NATIVE-SEC-3``.
+
+*********************************
+Set Up Service VM as IPv6 vRouter
+*********************************
+
**SCENARIO-3-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following
commands should be executed: