diff options
Diffstat (limited to 'docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst')
| -rw-r--r-- | docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst new file mode 100644 index 0000000..050be79 --- /dev/null +++ b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst @@ -0,0 +1,108 @@ +==================================== +Setting Up OpenStack Controller Node +==================================== + +Please **note** that the instructions shown here are using ``devstack`` installer. If you are an experienced +user and installs OpenStack in a different way, you can skip this step and follow the instructions of the +method you are using to install OpenStack. + +For exemplary purpose, we assume: + +* The hostname of OpenStack Controller Node is ``opnfv-os-controller``, and the host IP address is ``192.168.0.10`` +* Ubuntu 14.04 or Fedora 21 is installed +* We use ``opnfv`` as username to login. +* We use ``devstack`` to install OpenStack Kilo. Please note that although the instructions are based on + OpenStack Kilo, they can be applied to Liberty in the same way. + +**OS-N-0**: Login to OpenStack Controller Node with username ``opnfv`` + +**OS-N-1**: Update the packages and install git + +For **Ubuntu**: + +.. code-block:: bash + + sudo apt-get update -y + sudo apt-get install -y git + +For **Fedora**: + +.. code-block:: bash + + sudo yum update -y + sudo yum install -y git + +**OS-N-2**: Clone the following GitHub repository to get the configuration and metadata files + +.. code-block:: bash + + git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc + +**OS-N-3**: Download devstack and switch to stable/kilo branch + +.. code-block:: bash + + git clone https://github.com/openstack-dev/devstack.git -b stable/kilo + +**OS-N-4**: Start a new terminal, and change directory to where OpenStack is installed. + +.. code-block:: bash + + cd ~/devstack + +**OS-N-5**: Create a ``local.conf`` file from the GitHub repo we cloned at **OS-N-2**. + +.. code-block:: bash + + cp /opt/stack/opnfv_os_ipv6_poc/scenario2/local.conf.odl.controller ~/devstack/local.conf + +Please **note** that you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address +of Open Daylight Controller. + +**OS-N-6**: Initiate Openstack setup by invoking ``stack.sh`` + +.. code-block:: bash + + ./stack.sh + +**OS-N-7**: If the setup is successful you would see the following logs on the console. Please note +that the IP addresses are all for the purpose of example. Your IP addresses will match the ones +of your actual network interfaces. + +.. code-block:: bash + + This is your host IP address: 192.168.0.10 + This is your host IPv6 address: ::1 + Horizon is now available at http://192.168.0.10/ + Keystone is serving at http://192.168.0.10:5000/ + The default users are: admin and demo + The password: password + +Please **note** that The IP addresses above are exemplary purpose. It will show you the actual IP address of your host. + +**OS-N-8**: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf`` +to lock the codebase. Devstack uses these configuration parameters to determine if it has to run with +the existing codebase or update to the latest copy. + +**OS-N-9**: Source the credentials. + +.. code-block:: bash + + opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo + +**OS-N-10**: Verify some commands to check if setup is working fine. + +.. code-block:: bash + + opnfv@opnfv-os-controller:~/devstack$ nova flavor-list + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True | + | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True | + | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True | + | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True | + | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True | + +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+ + +Now you can start the Compute node setup. |