diff options
Diffstat (limited to 'docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst')
| -rw-r--r-- | docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst | 54 |
1 files changed, 35 insertions, 19 deletions
diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst index 24899da..55dd241 100644 --- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst +++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst @@ -158,18 +158,31 @@ configuration parameters. security_group_api = nova firewall_driver = nova.virt.firewall.NoopFirewallDriver +**OS-NATIVE-SEC-3**: After updating the settings, you will have to restart the +``Neutron`` and ``Nova`` services. + ********************************* Set Up Service VM as IPv6 vRouter ********************************* -**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following -commands should be executed: +**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. +We have to source the tenant credentials in this step. The following commands should be executed +in ``devstack``: .. code-block:: bash + # source the tenant credentials in devstack cd ~/devstack source openrc admin demo +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example, +the following command may be used for some other installers: + + # source the tenant credentials in some other installers + source /opt/admin-openrc.sh + +**Please refer to relevant documentation of installers if you encounter any issue**. + **OS-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` .. code-block:: bash @@ -182,22 +195,10 @@ commands should be executed: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**OS-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external -connectivity. - -.. code-block:: bash - - neutron router-create ipv4-router - neutron router-create ipv6-router - -**OS-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using the appropriate values based on the -data-center physical network setup. - -.. code-block:: bash - - neutron net-create --router:external ext-net +**OS-NATIVE-SETUP-4**: Now we have to move the public network from physical network +interface to ``br-ex``, including moving the public IP address and setting up default route. -**OS-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, +Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command @@ -211,9 +212,8 @@ below are for exemplary purpose. **Please replace them with the IP addresses of sudo ip addr add 198.59.156.113/24 dev br-ex sudo ifconfig br-ex up sudo ip route add default via 198.59.156.1 dev br-ex - neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 -**OS-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on +**OS-NATIVE-SETUP-5**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on ``br-ex`` .. code-block:: bash @@ -234,6 +234,22 @@ below are for exemplary purpose. **Please replace them with the IP addresses of Please note that the IP addresses above are exemplary purpose. +**OS-NATIVE-SETUP-6**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external +connectivity. + +.. code-block:: bash + + neutron router-create ipv4-router + neutron router-create ipv6-router + +**OS-NATIVE-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the +data-center physical network setup. + +.. code-block:: bash + + neutron net-create --router:external ext-net + neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 + **OS-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2`` with port_security disabled |