summaryrefslogtreecommitdiffstats
path: root/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst')
-rw-r--r--docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst54
1 files changed, 35 insertions, 19 deletions
diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
index 24899da..55dd241 100644
--- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
+++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
@@ -158,18 +158,31 @@ configuration parameters.
security_group_api = nova
firewall_driver = nova.virt.firewall.NoopFirewallDriver
+**OS-NATIVE-SEC-3**: After updating the settings, you will have to restart the
+``Neutron`` and ``Nova`` services.
+
*********************************
Set Up Service VM as IPv6 vRouter
*********************************
-**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following
-commands should be executed:
+**OS-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running.
+We have to source the tenant credentials in this step. The following commands should be executed
+in ``devstack``:
.. code-block:: bash
+ # source the tenant credentials in devstack
cd ~/devstack
source openrc admin demo
+Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example,
+the following command may be used for some other installers:
+
+ # source the tenant credentials in some other installers
+ source /opt/admin-openrc.sh
+
+**Please refer to relevant documentation of installers if you encounter any issue**.
+
**OS-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter``
.. code-block:: bash
@@ -182,22 +195,10 @@ commands should be executed:
glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-**OS-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external
-connectivity.
-
-.. code-block:: bash
-
- neutron router-create ipv4-router
- neutron router-create ipv6-router
-
-**OS-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
-data-center physical network setup.
-
-.. code-block:: bash
-
- neutron net-create --router:external ext-net
+**OS-NATIVE-SETUP-4**: Now we have to move the public network from physical network
+interface to ``br-ex``, including moving the public IP address and setting up default route.
-**OS-NATIVE-SETUP-6**: If your ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``,
+Because our ``opnfv-os-controller`` node has two interfaces ``eth0`` and ``eth1``,
and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.
Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
@@ -211,9 +212,8 @@ below are for exemplary purpose. **Please replace them with the IP addresses of
sudo ip addr add 198.59.156.113/24 dev br-ex
sudo ifconfig br-ex up
sudo ip route add default via 198.59.156.1 dev br-ex
- neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-**OS-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on
+**OS-NATIVE-SETUP-5**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on
``br-ex``
.. code-block:: bash
@@ -234,6 +234,22 @@ below are for exemplary purpose. **Please replace them with the IP addresses of
Please note that the IP addresses above are exemplary purpose.
+**OS-NATIVE-SETUP-6**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external
+connectivity.
+
+.. code-block:: bash
+
+ neutron router-create ipv4-router
+ neutron router-create ipv6-router
+
+**OS-NATIVE-SETUP-7**: Create an external network/subnet ``ext-net`` using the appropriate values based on the
+data-center physical network setup.
+
+.. code-block:: bash
+
+ neutron net-create --router:external ext-net
+ neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
+
**OS-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2``
with port_security disabled