diff options
Diffstat (limited to 'docs/setupservicevm/0-ipv6-configguide-prep-infra.rst')
| -rw-r--r-- | docs/setupservicevm/0-ipv6-configguide-prep-infra.rst | 27 |
1 files changed, 5 insertions, 22 deletions
diff --git a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst index 56803bf..9703991 100644 --- a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst +++ b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst @@ -1,23 +1,6 @@ -======================== -Preparing Infrastructure -======================== - -******************** -Architectural Design -******************** - -The architectural design of using a service VM as an IPv6 vRouter is -shown as follows in :numref:`s2-figure1`: - -.. figure:: images/ipv6-architecture.png - :name: s2-figure1 - :width: 100% - - Architectural Design of Using a VM as an IPv6 vRouter - -******************** +==================== Infrastructure Setup -******************** +==================== In order to set up the service VM as an IPv6 vRouter, we need to prepare 3 hosts, each of which has minimum 8GB RAM and 40GB storage. One host is used as OpenStack Controller @@ -34,15 +17,15 @@ For exemplary purpose, we assume: * We use ``opnfv`` as username to login. * We use ``devstack`` to install OpenStack Kilo. Please note that OpenStack Liberty can be used as well. -The underlay network topology of those 3 hosts are shown as follows in :numref:`s2-figure2`: +The underlay network topology of those 3 hosts are shown as follows in :numref:`s2-figure1`: .. figure:: images/ipv6-topology-scenario-2.png - :name: s2-figure2 + :name: s2-figure1 :width: 100% Underlay Network Topology - Scenario 2 -**Please note that the IP address shown in** :numref:`s2-figure2` +**Please note that the IP address shown in** :numref:`s2-figure1` **are for exemplary purpose. You need to configure your public IP address connecting to Internet according to your actual network infrastructure. And you need to make sure the private IP address are |