diff options
Diffstat (limited to 'docs/reldoc/index.rst')
| -rw-r--r-- | docs/reldoc/index.rst | 143 |
1 files changed, 53 insertions, 90 deletions
diff --git a/docs/reldoc/index.rst b/docs/reldoc/index.rst index 4367796..6eab98c 100644 --- a/docs/reldoc/index.rst +++ b/docs/reldoc/index.rst @@ -89,17 +89,31 @@ Disable Security Groups in OpenStack ML2 Setup security_group_api = nova firewall_driver = nova.virt.firewall.NoopFirewallDriver +**OPNFV-NATIVE-SEC-3**: After updating the settings, you will have to restart the +``Neutron`` and ``Nova`` services. + --------------------------------- Set Up Service VM as IPv6 vRouter --------------------------------- -**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following -commands should be executed: +**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. +We have to source the tenant credentials in this step. The following command should be executed: .. code-block:: bash + # source the tenant credentials in OPNFV + source /opt/admin-openrc.sh + +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example, +in ``devstack``, the following command should be used: + +.. code-block:: bash + + # source the tenant credentials in devstack source openrc admin demo +**Please refer to relevant documentation of installers if you encounter any issue**. + **OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter`` .. code-block:: bash @@ -112,7 +126,14 @@ commands should be executed: glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2 -**OPNFV-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` +**OPNFV-NATIVE-SETUP-4: This Step is Informational. OPNFV Installer has taken care of this Step +during deployment. You may refer to this Step only if there is any issue, or if you are using other installers**. + +We have to move the public network from physical network interface to ``br-ex``, including moving +the public IP address and setting up default route. Please refer to ``OS-NATIVE-SETUP-4`` and +``OS-NATIVE-SETUP-5`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.html#set-up-service-vm-as-ipv6-vrouter>`_. + +**OPNFV-NATIVE-SETUP-5**: Create Neutron routers ``ipv4-router`` and ``ipv6-router`` which need to provide external connectivity. .. code-block:: bash @@ -120,51 +141,15 @@ which need to provide external connectivity. neutron router-create ipv4-router neutron router-create ipv6-router -**OPNFV-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using +**OPNFV-NATIVE-SETUP-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the data-center physical network setup. .. code-block:: bash neutron net-create --router:external ext-net - -**OPNFV-NATIVE-SETUP-6**: If your OpenStack Controller node has two interfaces ``eth0`` and -``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``. - -Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command -below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**. - -.. code-block:: bash - - sudo ip addr del 198.59.156.113/24 dev eth1 - sudo ovs-vsctl add-port br-ex eth1 - sudo ifconfig eth1 up - sudo ip addr add 198.59.156.113/24 dev br-ex - sudo ifconfig br-ex up - sudo ip route add default via 198.59.156.1 dev br-ex neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 -**OPNFV-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address, -and that the default route is on ``br-ex`` - -.. code-block:: bash - - $ ip a s br-ex - 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default - link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff - inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex - valid_lft forever preferred_lft forever - inet6 fe80::543e:28ff:fe70:4426/64 scope link - valid_lft forever preferred_lft forever - $ - $ ip route - default via 198.59.156.1 dev br-ex - 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10 - 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 - 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113 - -Please note that the IP addresses above are exemplary purpose. - -**OPNFV-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and +**OPNFV-NATIVE-SETUP-7**: Create Neutron networks ``ipv4-int-network1`` and ``ipv6-int-network2`` with port_security disabled .. code-block:: bash @@ -172,7 +157,7 @@ Please note that the IP addresses above are exemplary purpose. neutron net-create --port_security_enabled=False ipv4-int-network1 neutron net-create --port_security_enabled=False ipv6-int-network2 -**OPNFV-NATIVE-SETUP-9**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network +**OPNFV-NATIVE-SETUP-8**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network ``ipv4-int-network1``, and associate it to ``ipv4-router``. .. code-block:: bash @@ -180,7 +165,7 @@ Please note that the IP addresses above are exemplary purpose. neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24 neutron router-interface-add ipv4-router ipv4-int-subnet1 -**OPNFV-NATIVE-SETUP-10**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router`` +**OPNFV-NATIVE-SETUP-9**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router`` and ``ipv6-router``. .. code-block:: bash @@ -188,7 +173,7 @@ and ``ipv6-router``. neutron router-gateway-set ipv4-router ext-net neutron router-gateway-set ipv6-router ext-net -**OPNFV-NATIVE-SETUP-11**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and +**OPNFV-NATIVE-SETUP-10**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to ``ipv6-router`` @@ -199,13 +184,13 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot neutron router-interface-add ipv6-router ipv4-int-subnet2 neutron router-interface-add ipv6-router ipv6-int-subnet2 -**OPNFV-NATIVE-SETUP-12**: Create a keypair +**OPNFV-NATIVE-SETUP-11**: Create a keypair .. code-block:: bash nova keypair-add vRouterKey > ~/vRouterKey -**OPNFV-NATIVE-SETUP-13**: Create ports for vRouter (with some specific MAC address +**OPNFV-NATIVE-SETUP-12**: Create ports for vRouter (with some specific MAC address - basically for automation - to know the IPv6 addresses that would be assigned to the port). .. code-block:: bash @@ -213,21 +198,21 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2 neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1 -**OPNFV-NATIVE-SETUP-14**: Create ports for VM1 and VM2. +**OPNFV-NATIVE-SETUP-13**: Create ports for VM1 and VM2. .. code-block:: bash neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1 neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1 -**OPNFV-NATIVE-SETUP-15**: Update ``ipv6-router`` with routing information to subnet +**OPNFV-NATIVE-SETUP-14**: Update ``ipv6-router`` with routing information to subnet ``2001:db8:0:2::/64`` .. code-block:: bash neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111 -**OPNFV-NATIVE-SETUP-16**: Boot Service VM (``vRouter``), VM1 and VM2 +**OPNFV-NATIVE-SETUP-15**: Boot Service VM (``vRouter``), VM1 and VM2 .. code-block:: bash @@ -238,7 +223,7 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2 nova list # Verify that all the VMs are in ACTIVE state. -**OPNFV-NATIVE-SETUP-17**: If all goes well, the IPv6 addresses assigned to the VMs +**OPNFV-NATIVE-SETUP-16**: If all goes well, the IPv6 addresses assigned to the VMs would be as shown as follows: .. code-block:: bash @@ -248,7 +233,7 @@ would be as shown as follows: VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 -**OPNFV-NATIVE-SETUP-18**: Now we can ``SSH`` to ``vRouter``. +**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller @@ -327,56 +312,34 @@ Source the Credentials in OpenStack Controller Node **SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal, and change directory to where OpenStack is installed. -**SETUP-SVM-2**: Source the credentials. +**SETUP-SVM-2**: We have to source the tenant credentials in this step. +The following command should be executed: .. code-block:: bash - source openrc admin demo - --------------------------------------- -Add External Connectivity to ``br-ex`` --------------------------------------- - -If your OpenStack controller node has two interfaces ``eth0`` and ``eth1``, and ``eth1`` -is used for external connectivity, move the IP address of ``eth1``, including default route to ``br-ex``. + # source the tenant credentials in OPNFV + source /opt/admin-openrc.sh -**SETUP-SVM-3**: Add ``eth1`` to ``br-ex`` and move the IP address and the default route from ``eth1`` to ``br-ex`` +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example, +in ``devstack``, the following command should be used: .. code-block:: bash - sudo ip addr del 198.59.156.113/24 dev eth1 - sudo ovs-vsctl add-port br-ex eth1 - sudo ifconfig eth1 up - sudo ip addr add 198.59.156.113/24 dev br-ex - sudo ifconfig br-ex up - sudo ip route add default via 198.59.156.1 dev br-ex - -Please note that: - -* The IP address ``198.59.156.113`` and related subnet and gateway addressed in the command - below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**. -* **This can be automated in /etc/network/interfaces**. + # source the tenant credentials in devstack + source openrc admin demo -**SETUP-SVM-4**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on -``br-ex`` +**Please refer to relevant documentation of installers if you encounter any issue**. -.. code-block:: bash +------------------------------------------------------------------------------------ +Informational Note: Move Public Network from Physical Network Interface to ``br-ex`` +------------------------------------------------------------------------------------ - $ ip a s br-ex - 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default - link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff - inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex - valid_lft forever preferred_lft forever - inet6 fe80::543e:28ff:fe70:4426/64 scope link - valid_lft forever preferred_lft forever - $ - $ ip route - default via 198.59.156.1 dev br-ex - 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10 - 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 - 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113 +**This Step is Informational. OPNFV Installer has taken care of this Step during deployment. +You may refer to this Step only if there is any issue, or if you are using other installers**. -Please note that The IP addresses above are exemplary purpose +We have to move the public network from physical network interface to ``br-ex``, including moving +the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and +``SETUP-SVM-4`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/4-ipv6-configguide-servicevm.html#add-external-connectivity-to-br-ex>`_. -------------------------------------------------------- Create IPv4 Subnet and Router with External Connectivity |