diff options
Diffstat (limited to 'docs/installationprocedure/scenario.installation.instruction.rst')
| -rw-r--r-- | docs/installationprocedure/scenario.installation.instruction.rst | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/docs/installationprocedure/scenario.installation.instruction.rst b/docs/installationprocedure/scenario.installation.instruction.rst deleted file mode 100644 index 166880a..0000000 --- a/docs/installationprocedure/scenario.installation.instruction.rst +++ /dev/null @@ -1,205 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat) - -========================================= -Install OPNFV on IPv6-Only Infrastructure -========================================= - -This section provides instructions to install OPNFV on IPv6-only Infrastructure. All underlay networks -and API endpoints will be IPv6-only except: - -1. "admin" network in underlay/undercloud still has to be IPv4, due to lack of support of IPMI - over IPv6 or PXE over IPv6. -2. OVS VxLAN (or GRE) tunnel endpoint is still IPv4 only, although IPv6 traffic can be - encapsulated within the tunnel. -3. Metadata server is still IPv4 only. - -Except the limitations above, the use case scenario of the IPv6-only infrastructure includes: - -1. Support OPNFV deployment on an IPv6 only infrastructure. -2. Horizon/ODL-DLUX access using IPv6 address from an external host. -3. OpenStack API access using IPv6 addresses from various python-clients. -4. Ability to create Neutron Routers, IPv6 subnets (e.g. SLAAC/DHCPv6-Stateful/ - DHCPv6-Stateless) to support North-South traffic. -5. Inter VM communication (East-West routing) when VMs are spread - across two compute nodes. -6. VNC access into a VM using IPv6 addresses. - -------------------------------------------- -Install OPNFV in OpenStack-Only Environment -------------------------------------------- - -**Apex Installer**: - -.. code-block:: bash - - # HA, Virtual deployment in OpenStack-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # HA, Bare Metal deployment in OpenStack-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ - -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA, Virtual deployment in OpenStack-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA, Bare Metal deployment in OpenStack-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ - -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml - - # Note: - # - # 1. Parameter ""-v" is mandatory for Virtual deployment - # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment - # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file - # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure - -**Joid** Installer: - -.. code-block:: bash - - # HA deployment in OpenStack-only environment - ./deploy.sh -o mitaka -s nosdn -t ha -l default -f ipv6 - - # Non-HA deployment in OpenStack-only environment - ./deploy.sh -o mitaka -s nosdn -t nonha -l default -f ipv6 - -Please **NOTE** that: - -* You need to refer to **installer's documentation** for other necessary - parameters applicable to your deployment. -* You need to refer to **Release Notes** and **installer's documentation** if there is - any issue in installation. - --------------------------------------------------- -Install OPNFV in OpenStack with ODL-L2 Environment --------------------------------------------------- - -**Apex Installer**: - -.. code-block:: bash - - # HA, Virtual deployment in OpenStack with Open Daylight L2-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # HA, Bare Metal deployment in OpenStack with Open Daylight L2-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ - -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA deployment in OpenStack with Open Daylight L2-only environment - # There is no settings file provided by default for odl_l2 non-HA deployment - # You need to copy /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml to another file - # e.g. /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml - # and change the "ha_enabled" parameter to be "false", i.e.: "ha_enabled: false", and: - - # - For Non-HA, Virtual deployment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # - For Non-HA, Bare Metal deployment - ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ - -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml - - # Note: - # - # 1. Parameter ""-v" is mandatory for Virtual deployment - # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment - # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file - # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure - -**Joid** Installer: - -.. code-block:: bash - - # HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -o mitaka -s odl -t ha -l default -f ipv6 - - # Non-HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -o mitaka -s odl -t nonha -l default -f ipv6 - -Please **NOTE** that: - -* You need to refer to **installer's documentation** for other necessary - parameters applicable to your deployment. -* You need to refer to **Release Notes** and **installer's documentation** if there is - any issue in installation. - -------------------- -Testing Methodology -------------------- - -There are 2 levels of testing to validate the deployment. - -++++++++++++++++ -Underlay Testing -++++++++++++++++ - -**Underlay** Testing is to validate that API endpoints are listening on IPv6 addresses. -This can be as simple as validating Keystone service, and as complete as validating each -API endpoint. It is important to reuse Tempest API testing. - -Please **Note** that, to the best of our knowledge, Tempest API testing does not validate -API endpoints listening on IPv6 addresses. Thus Underlay Testing is postponed to future -release until Tempest API testing is ready to validate API endpoints listening on IPv6 addresses. - -+++++++++++++++ -Overlay Testing -+++++++++++++++ - -**Overlay** Testing is to validate that IPv6 is supported in tenant networks, subnets and routers. -Both Tempest API testing and Tempest Scenario testing are used in our Overlay Testing. - -Tempest API testing validates that the Neutron API supports the creation of IPv6 networks, subnets, routers, etc: - -.. code-block:: bash - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet - tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet - tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility - tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks - tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets - tempest.api.network.test_networks.NetworksIpV6Test.test_show_network - tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_create_update_delete_network_subnet - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_external_network_visibility - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_networks - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_subnets - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_network - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_subnet - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port - tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports - tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port - tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces - tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id - tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id - tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups - -Tempest Scenario testing validates some specific overlay IPv6 scenarios -(i.e. use cases) as follows: - -.. code-block:: bash - - tempest.scenario.test_network_v6.TestGettingAddress.test_dhcp6_stateless_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_dhcp6_stateless_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_dhcpv6_stateless - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_slaac - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_slaac_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_dhcpv6_stateless - tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_slaac - tempest.scenario.test_network_v6.TestGettingAddress.test_slaac_from_os - -The above Tempest API testing and Scenario testing are quite comprehensive to validate -overlay IPv6 tenant networks. They are used in Smoke Test in FuncTest, which is integrated -into OPNFV's CI/CD environment. - |