summaryrefslogtreecommitdiffstats
path: root/docs/gapanalysis
diff options
context:
space:
mode:
Diffstat (limited to 'docs/gapanalysis')
-rw-r--r--docs/gapanalysis/gap-analysis-openstack-kilo.rst292
1 files changed, 153 insertions, 139 deletions
diff --git a/docs/gapanalysis/gap-analysis-openstack-kilo.rst b/docs/gapanalysis/gap-analysis-openstack-kilo.rst
index 8087a8a..39fc391 100644
--- a/docs/gapanalysis/gap-analysis-openstack-kilo.rst
+++ b/docs/gapanalysis/gap-analysis-openstack-kilo.rst
@@ -7,143 +7,157 @@ OpenStack Neutron in Kilo Official Release. The following table lists the use ca
requirements of VIM-agnostic IPv6 functionality, including infrastructure layer and VNF
(VM) layer, and its gap analysis with OpenStack Neutron in Kilo Official Release.
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Use Case / Requirement |Supported in Kilo Neutron|Notes |
-+=====================================+=========================+===============================================+
-|All topologies work in a multi-tenant|Yes |The IPv6 design is following the Neutron tenant|
-|environment | |networks model; dnsmasq is being used inside |
-| | |DHCP network namespaces, while radvd is being |
-| | |used inside Neutron routers namespaces to |
-| | |provide full isolation between tenants. Tenant |
-| | |isolation can be based on VLANs, GRE, or VXLAN |
-| | |encapsulation. In case of overlays, the |
-| | |transport network (and VTEPs) must be IPv4 |
-| | |based as of today. |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|IPv6 VM to VM only |Yes |It is possible to assign IPv6-only addresses to|
-| | |VMs. Both switching (within VMs on the same |
-| | |tenant network) as well as east/west routing |
-| | |(between different networks of the same tenant)|
-| | |are supported. |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|IPv6 external L2 VLAN directly |Yes |IPv6 provider network model; RA messages from |
-|attached to a VM | |upstream (external) router are forwarded into |
-| | |the VMs |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|IPv6 subnet routed via L3 agent to an| |Configuration is enhanced in Kilo to allow |
-|external IPv6 network | |easier setup of the upstream gateway, without |
-| |1. Yes |the user forced to create an IPv6 subnet for |
-|1. Both VLAN and overlay (e.g. GRE, | |the external network. |
-| VXLAN) subnet attached to VMs; | | |
-|2. Must be able to support multiple |2. Yes | |
-| L3 agents for a given external | | |
-| network to support scaling | | |
-| (neutron scheduler to assign | | |
-| vRouters to the L3 agents) | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Ability for a NIC to support both | |Dual-stack is supported in Neutron with the |
-|IPv4 and IPv6 (dual stack) address. | |addition of ``Multiple IPv6 Prefixes`` |
-| | |Blueprint |
-|1. VM with a single interface |1. Yes | |
-| associated with a network, which | | |
-| is then associated with two | | |
-| subnets | | |
-|2. VM with two different interfaces |2. Yes | |
-| associated with two different | | |
-| networks and two different subnets| | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Support IPv6 Address assignment modes|1. Yes | |
-| | | |
-|1. SLAAC |2. Yes | |
-|2. DHCPv6 Stateless | | |
-|3. DHCPv6 Stateful |3. Yes | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Ability to create a port on an IPv6 |Yes | |
-|DHCPv6 Stateful subnet and assign a | | |
-|specific IPv6 address to the port and| | |
-|have it taken out of the DHCP address| | |
-|pool. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Ability to create a port with |**No** |The following patch disables this operation: |
-|fixed_ip for a SLAAC/DHCPv6-Stateless| |https://review.openstack.org/#/c/129144/ |
-|Subnet. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Support for private IPv6 to external |**Rejected** |Blueprint proposed in upstream and got |
-|IPv6 floating IP; Ability to specify | |rejected. General expectation is to avoid NAT |
-|floating IPs via Neutron API (REST | |with IPv6 by assigning GUA to tenant VMs. See |
-|and CLI) as well as via Horizon, | |https://review.openstack.org/#/c/139731/ |
-|including combination of IPv6/IPv4 | |for discussion. |
-|and IPv4/IPv6 floating IPs if | | |
-|implemented. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Provide IPv6/IPv4 feature parity in |**To-Do** |The L3 configuration should be transparent for |
-|support for pass-through capabilities| |the SR-IOV implementation. SR-IOV networking |
-|(e.g., SR-IOV). | |support introduced in Juno based on the |
-| | |``sriovnicswitch`` ML2 driver is expected to |
-| | |work with IPv4 and IPv6 enabled VMs. We need to|
-| | |verify if it works or not |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Additional IPv6 extensions, for |**No** |It does not appear to be considered yet (lack |
-|example: IPSEC, IPv6 Anycast, | |of clear requirements) |
-|Multicast | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|VM access to the meta-data server to |**No** |This is currently not supported. Config-drive |
-|obtain user data, SSH keys, etc. | |or dual-stack IPv4 / IPv6 can be used as a |
-|using cloud-init with IPv6 only | |workaround (so that the IPv4 network is used to|
-|interfaces. | |obtain connectivity with the metadata service) |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Full support for IPv6 matching (i.e.,|Yes | |
-|IPv6, ICMPv6, TCP, UDP) in security | | |
-|groups. Ability to control and manage| | |
-|all IPv6 security group capabilities | | |
-|via Neutron/Nova API (REST and CLI) | | |
-|as well as via Horizon. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|During network/subnet/router create, |Yes |Two new Subnet attributes were introduced to |
-|there should be an option to allow | |control IPv6 address assignment options: |
-|user to specify the type of address | | |
-|management they would like. This | | |
-|includes all options including those | |* ``ipv6-ra-mode``: to determine who sends |
-|low priority if implemented (e.g., | | Router Advertisements; |
-|toggle on/off router and address | | |
-|prefix advertisements); It must be | |* ``ipv6-address-mode``: to determine how VM |
-|supported via Neutron API (REST and | | obtains IPv6 address, default gateway, and/or|
-|CLI) as well as via Horizon | | optional information. |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Security groups anti-spoofing: |Yes | |
-|Prevent VM from using a source | | |
-|IPv6/MAC address which is not | | |
-|assigned to the VM | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Protect tenant and provider network |Yes |When using a tenant network, Neutron is going |
-|from rough RAs | |to automatically handle the filter rules to |
-| | |allow connectivity of RAs to the VMs only from |
-| | |the Neutron router port; with provider |
-| | |networks, users are required to specify the LLA|
-| | |of the upstream router during the subnet |
-| | |creation, or otherwise manually edit the |
-| | |security-groups rules to allow incoming traffic|
-| | |from this specific address. |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Support the ability to assign |Yes | |
-|multiple IPv6 addresses to an | | |
-|interface; both for Neutron router | | |
-|interfaces and VM interfaces. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Ability for a VM to support a mix of |Yes | |
-|multiple IPv4 and IPv6 networks, | | |
-|including multiples of the same type.| | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Support for IPv6 Prefix Delegation. |**Roadmap** |Some partial support is available in Liberty |
-| | |release |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|Distributed Virtual Routing (DVR) |**No** |Blueprint proposed upstream, pending discussion|
-|support for IPv6 | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|IPv6 First-Hop Security, IPv6 ND |**Roadmap** |Supported in Liberty release |
-|spoofing. | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
-|IPv6 support in Neutron Layer3 High |Yes | |
-|Availability (keepalived+VRRP). | | |
-+-------------------------------------+-------------------------+-----------------------------------------------+
++-------------------------------------+-------------------------+---------------------------------+
+|Use Case / Requirement |Supported in Kilo Neutron|Notes |
++=====================================+=========================+=================================+
+|All topologies work in a multi-tenant|Yes |The IPv6 design is following the |
+|environment | |Neutron tenant networks model; |
+| | |dnsmasq is being used inside DHCP|
+| | |network namespaces, while radvd |
+| | |is being used inside Neutron |
+| | |routers namespaces to provide |
+| | |full isolation between tenants. |
+| | |Tenant isolation can be based on |
+| | |VLANs, GRE, or VXLAN |
+| | |encapsulation. In case of |
+| | |overlays, the transport network |
+| | |(and VTEPs) must be IPv4 based as|
+| | |of today. |
++-------------------------------------+-------------------------+---------------------------------+
+|IPv6 VM to VM only |Yes |It is possible to assign IPv6- |
+| | |only addresses to VMs. Both |
+| | |switching (within VMs on the same|
+| | |tenant network) as well as east /|
+| | |west routing (between different |
+| | |networks of the same tenant) are |
+| | |supported. |
++-------------------------------------+-------------------------+---------------------------------+
+|IPv6 external L2 VLAN directly |Yes |IPv6 provider network model; RA |
+|attached to a VM | |messages from upstream (external)|
+| | |router are forwarded into the VMs|
++-------------------------------------+-------------------------+---------------------------------+
+|IPv6 subnet routed via L3 agent to an| |Configuration is enhanced in Kilo|
+|external IPv6 network | |to allow easier setup of the |
+| |1. Yes |upstream gateway, without the |
+|1. Both VLAN and overlay (e.g. GRE, | |user forced to create an IPv6 |
+| VXLAN) subnet attached to VMs; | |subnet for the external network. |
+|2. Must be able to support multiple |2. Yes | |
+| L3 agents for a given external | | |
+| network to support scaling | | |
+| (neutron scheduler to assign | | |
+| vRouters to the L3 agents) | | |
++-------------------------------------+-------------------------+---------------------------------+
+|Ability for a NIC to support both | |Dual-stack is supported in |
+|IPv4 and IPv6 (dual stack) address. | |Neutron with the addition of |
+| | |``Multiple IPv6 Prefixes`` |
+|1. VM with a single interface |1. Yes |Blueprint |
+| associated with a network, which | | |
+| is then associated with two | | |
+| subnets | | |
+|2. VM with two different interfaces |2. Yes | |
+| associated with two different | | |
+| networks and two different subnets| | |
++-------------------------------------+-------------------------+---------------------------------+
+|Support IPv6 Address assignment modes|1. Yes | |
+| | | |
+|1. SLAAC |2. Yes | |
+|2. DHCPv6 Stateless | | |
+|3. DHCPv6 Stateful |3. Yes | |
++-------------------------------------+-------------------------+---------------------------------+
+|Ability to create a port on an IPv6 |Yes | |
+|DHCPv6 Stateful subnet and assign a | | |
+|specific IPv6 address to the port and| | |
+|have it taken out of the DHCP address| | |
+|pool. | | |
++-------------------------------------+-------------------------+---------------------------------+
+|Ability to create a port with |**No** |The following patch disables this|
+|fixed_ip for a SLAAC/DHCPv6-Stateless| |operation: https://review.opensta|
+|Subnet. | |ck.org/#/c/129144/ |
++-------------------------------------+-------------------------+---------------------------------+
+|Support for private IPv6 to external |**Rejected** |Blueprint proposed in upstream |
+|IPv6 floating IP; Ability to specify | |and got rejected. General |
+|floating IPs via Neutron API (REST | |expectation is to avoid NAT with |
+|and CLI) as well as via Horizon, | |IPv6 by assigning GUA to tenant |
+|including combination of IPv6/IPv4 | |VMs. See https://review.openstack|
+|and IPv4/IPv6 floating IPs if | |.org/#/c/139731/ for discussion. |
+|implemented. | | |
++-------------------------------------+-------------------------+---------------------------------+
+|Provide IPv6/IPv4 feature parity in |**To-Do** |The L3 configuration should be |
+|support for pass-through capabilities| |transparent for the SR-IOV |
+|(e.g., SR-IOV). | |implementation. SR-IOV networking|
+| | |support introduced in Juno based |
+| | |on the ``sriovnicswitch`` ML2 |
+| | |driver is expected to work with |
+| | |IPv4 and IPv6 enabled VMs. We |
+| | |need to verify if it works or not|
++-------------------------------------+-------------------------+---------------------------------+
+|Additional IPv6 extensions, for |**No** |It does not appear to be |
+|example: IPSEC, IPv6 Anycast, | |considered yet (lack of clear |
+|Multicast | |requirements) |
++-------------------------------------+-------------------------+---------------------------------+
+|VM access to the meta-data server to |**No** |This is currently not supported. |
+|obtain user data, SSH keys, etc. | |Config-drive or dual-stack IPv4 /|
+|using cloud-init with IPv6 only | | IPv6 can be used as a workaround|
+|interfaces. | |(so that the IPv4 network is used|
+| | |to obtain connectivity with the |
+| | |metadata service) |
++-------------------------------------+-------------------------+---------------------------------+
+|Full support for IPv6 matching (i.e.,|Yes | |
+|IPv6, ICMPv6, TCP, UDP) in security | | |
+|groups. Ability to control and manage| | |
+|all IPv6 security group capabilities | | |
+|via Neutron/Nova API (REST and CLI) | | |
+|as well as via Horizon. | | |
++-------------------------------------+-------------------------+---------------------------------+
+|During network/subnet/router create, |Yes |Two new Subnet attributes were |
+|there should be an option to allow | |introduced to control IPv6 |
+|user to specify the type of address | |address assignment options: |
+|management they would like. This | | |
+|includes all options including those | |* ``ipv6-ra-mode``: to determine |
+|low priority if implemented (e.g., | | who sends Router Advertisements|
+|toggle on/off router and address | | |
+|prefix advertisements); It must be | |* ``ipv6-address-mode``: to |
+|supported via Neutron API (REST and | | determine how VM obtains IPv6 |
+|CLI) as well as via Horizon | | address, default gateway, and/ |
+| | | or optional information. |
++-------------------------------------+-------------------------+---------------------------------+
+|Security groups anti-spoofing: |Yes | |
+|Prevent VM from using a source | | |
+|IPv6/MAC address which is not | | |
+|assigned to the VM | | |
++-------------------------------------+-------------------------+---------------------------------+
+|Protect tenant and provider network |Yes |When using a tenant network, |
+|from rough RAs | |Neutron is going to automatically|
+| | |handle the filter rules to allow |
+| | |connectivity of RAs to the VMs |
+| | |only from the Neutron router |
+| | |port; with provider networks, |
+| | |users are required to specify the|
+| | |LLA of the upstream router during|
+| | |the subnet creation, or otherwise|
+| | |manually edit the security-groups|
+| | |rules to allow incoming traffic |
+| | |from this specific address. |
++-------------------------------------+-------------------------+---------------------------------+
+|Support the ability to assign |Yes | |
+|multiple IPv6 addresses to an | | |
+|interface; both for Neutron router | | |
+|interfaces and VM interfaces. | | |
++-------------------------------------+-------------------------+---------------------------------+
+|Ability for a VM to support a mix of |Yes | |
+|multiple IPv4 and IPv6 networks, | | |
+|including multiples of the same type.| | |
++-------------------------------------+-------------------------+---------------------------------+
+|Support for IPv6 Prefix Delegation. |**Roadmap** |Some partial support is available|
+| | |in Liberty release |
++-------------------------------------+-------------------------+---------------------------------+
+|Distributed Virtual Routing (DVR) |**No** |Blueprint proposed upstream, |
+|support for IPv6 | |pending discussion |
++-------------------------------------+-------------------------+---------------------------------+
+|IPv6 First-Hop Security, IPv6 ND |**Roadmap** |Supported in Liberty release |
+|spoofing. | | |
++-------------------------------------+-------------------------+---------------------------------+
+|IPv6 support in Neutron Layer3 High |Yes | |
+|Availability (keepalived+VRRP). | | |
++-------------------------------------+-------------------------+---------------------------------+