diff options
Diffstat (limited to 'docs/configguide')
| -rw-r--r-- | docs/configguide/featureconfig.rst | 69 |
1 files changed, 56 insertions, 13 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst index 654ca61..c7d9330 100644 --- a/docs/configguide/featureconfig.rst +++ b/docs/configguide/featureconfig.rst @@ -6,7 +6,7 @@ IPv6 Configuration - Setting Up a Service VM as an IPv6 vRouter =============================================================== -This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Brahmaputra Release +This section provides instructions to set up a service VM as an IPv6 vRouter using OPNFV Colorado Release installers. The environment may be pure OpenStack option or Open Daylight L2-only option. The deployment model may be HA or non-HA. The infrastructure may be bare metal or virtual environment. @@ -35,7 +35,7 @@ Setup Manual in OpenStack-Only Environment ****************************************** If you intend to set up a service VM as an IPv6 vRouter in OpenStack-only environment of -OPNFV Brahmaputra Release, please **NOTE** that: +OPNFV Colorado Release, please **NOTE** that: * Because the anti-spoofing rules of Security Group feature in OpenStack prevents a VM from forwarding packets, we need to disable Security Group feature in the @@ -49,7 +49,7 @@ OPNFV Brahmaputra Release, please **NOTE** that: Install OPNFV and Preparation ----------------------------- -**OPNFV-NATIVE-INSTALL-1**: To install OpenStack-only environment of OPNFV Brahmaputra Release: +**OPNFV-NATIVE-INSTALL-1**: To install OpenStack-only environment of OPNFV Colorado Release: **Apex Installer**: @@ -81,10 +81,31 @@ Install OPNFV and Preparation .. code-block:: bash # HA deployment in OpenStack-only environment - ./deploy.sh -s os-nosdn-nofeature-ha + # Scenario Name: os-nosdn-nofeature-ha + # Scenario Configuration File: ha_heat_ceilometer_scenario.yaml + sudo ./deploy.sh -b <stack-config-uri> -l <lab-name> -p <pod-name> \ + -s ha_heat_ceilometer_scenario -i <iso-uri> # Non-HA deployment in OpenStack-only environment - ./deploy.sh -s os-nosdn-nofeature-noha + # Scenario Name: os-nosdn-nofeature-noha + # Scenario Configuration File: no-ha_heat_ceilometer_scenario.yaml + sudo ./deploy.sh -b <stack-config-uri> -l <lab-name> -p <pod-name> \ + -s no-ha_heat_ceilometer_scenario -i <iso-uri> + + # Note: + # + # 1. Refer to http://git.opnfv.org/cgit/fuel/tree/deploy/scenario/scenario.yaml for scenarios + # 2. Refer to http://git.opnfv.org/cgit/fuel/tree/ci/README for description of + # stack configuration directory structure + # 3. <stack-config-uri> is the base URI of stack configuration directory structure + # 3.1 Example: http://git.opnfv.org/cgit/fuel/tree/deploy/config + # 4. <lab-name> and <pod-name> must match the directory structure in stack configuration + # 4.1 Example of <lab-name>: -l devel-pipeline + # 4.2 Example of <pod-name>: -p elx + # 5. <iso-uri> could be local or remote ISO image of Fuel Installer + # 5.1 Example: http://artifacts.opnfv.org/fuel/colorado/opnfv-colorado.1.0.iso + # + # Please refer to Fuel Installer's documentation for further information and any update **Joid** Installer: @@ -146,8 +167,9 @@ Set Up Service VM as IPv6 vRouter --------------------------------- **OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. -We have to source the tenant credentials in this step. Please **NOTE** that the method of sourcing tenant -credentials may vary depending on installers. For example: +We have to source the tenant credentials in OpenStack controller node in this step. +Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. +For example: **Apex** installer: @@ -226,7 +248,7 @@ network that installer creates when you create the subnet. For example: * **Apex** installer: ``external`` * **Compass** installer: ``ext-net`` -* **Fuel** installer: ``net04_ext`` +* **Fuel** installer: ``admin_floating_net`` * **Joid** installer: ``ext-net`` **Please refer to the documentation of installers if there is any issue** @@ -391,7 +413,7 @@ Setup Manual in OpenStack with Open Daylight L2-Only Environment **************************************************************** If you intend to set up a service VM as an IPv6 vRouter in an environment of OpenStack -and Open Daylight L2-only of OPNFV Brahmaputra Release, please **NOTE** that: +and Open Daylight L2-only of OPNFV Colorado Release, please **NOTE** that: * The hostnames, IP addresses, and username are for exemplary purpose in instructions. Please change as needed to fit your environment. @@ -407,7 +429,7 @@ Install OPNFV and Preparation ----------------------------- **OPNFV-INSTALL-1**: To install OpenStack with Open Daylight L2-only environment -of OPNFV Brahmaputra Release: +of OPNFV Colorado Release: **Apex Installer**: @@ -439,10 +461,31 @@ of OPNFV Brahmaputra Release: .. code-block:: bash # HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -s os-odl_l2-nofeature-ha + # Scenario Name: os-odl_l2-nofeature-ha + # Scenario Configuration File: ha_odl-l2_heat_ceilometer_scenario.yaml + sudo ./deploy.sh -b <stack-config-uri> -l <lab-name> -p <pod-name> \ + -s ha_odl-l2_heat_ceilometer_scenario -i <iso-uri> # Non-HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -s os-odl_l2-nofeature-noha + # Scenario Name: os-odl_l2-nofeature-noha + # Scenario Configuration File: no-ha_odl-l2_heat_ceilometer_scenario.yaml + sudo ./deploy.sh -b <stack-config-uri> -l <lab-name> -p <pod-name> \ + -s no-ha_odl-l2_heat_ceilometer_scenario -i <iso-uri> + + # Note: + # + # 1. Refer to http://git.opnfv.org/cgit/fuel/tree/deploy/scenario/scenario.yaml for scenarios + # 2. Refer to http://git.opnfv.org/cgit/fuel/tree/ci/README for description of + # stack configuration directory structure + # 3. <stack-config-uri> is the base URI of stack configuration directory structure + # 3.1 Example: http://git.opnfv.org/cgit/fuel/tree/deploy/config + # 4. <lab-name> and <pod-name> must match the directory structure in stack configuration + # 4.1 Example of <lab-name>: -l devel-pipeline + # 4.2 Example of <pod-name>: -p elx + # 5. <iso-uri> could be local or remote ISO image of Fuel Installer + # 5.1 Example: http://artifacts.opnfv.org/fuel/colorado/opnfv-colorado.1.0.iso + # + # Please refer to Fuel Installer's documentation for further information and any update **Joid** Installer: @@ -588,7 +631,7 @@ network that installer creates when you create the subnet. For example: * **Apex** installer: ``external`` * **Compass** installer: ``ext-net`` -* **Fuel** installer: ``net04_ext`` +* **Fuel** installer: ``admin_floating_net`` * **Joid** installer: ``ext-net`` **Please refer to the documentation of installers if there is any issue** |