1 files changed, 98 insertions, 98 deletions
diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst
index 7a508bd..64f02a1 100644
--- a/docs/configguide/ipv6-configguide.rst
+++ b/docs/configguide/ipv6-configguide.rst
@@ -1,103 +1,103 @@
-==========================================
-Setting Up a Service VM as an IPv6 vRouter
-==========================================
-
+==========================================
+Setting Up a Service VM as an IPv6 vRouter
+==========================================
+
 After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10
-steps to set up a service VM as an IPv6 vRouter:
-
-- Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_
-
-- Step 1: `Start Open Daylight`_
-
-- Step 2: `Start Open Stack`_
-
-- Step 3: `Create External Network Connectivity ext-net`_
-
-- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_
-
-- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_
-
-- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_
-
-- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_
-
-- Step 8: `Spawn RADVD in vRouter`_
-
-- Step 9: `Testing to Verify Setup Complete`#_
-
-Once the setup is complete, you can go to `Next Steps`_.
-
-*********************************************
-_`Disable odl-l3 and Enable neutron-l3-agent`
-*********************************************
-
+steps to set up a service VM as an IPv6 vRouter:
+
+- Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_
+
+- Step 1: `Start Open Daylight`_
+
+- Step 2: `Start Open Stack`_
+
+- Step 3: `Create External Network Connectivity ext-net`_
+
+- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_
+
+- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_
+
+- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_
+
+- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_
+
+- Step 8: `Spawn RADVD in vRouter`_
+
+- Step 9: `Testing to Verify Setup Complete`_
+
+Once the setup is complete, you can go to `Next Steps`_.
+
+*********************************************
+_`Disable odl-l3 and Enable neutron-l3-agent`
+*********************************************
+
 This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of
-OPNFV Brahmaputra Release.
-
-If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1.
-
-# Place holder for instructions of how to disable odl-l3 and enable neutron-l3-agent
-
-**********************
-_`Start Open Daylight` 
-**********************
-
-# Place holder for instructions of how to start Open Daylight
-
-*******************
-_`Start Open Stack`
-*******************
-
-# Place holder for instructions of how to start Open Stack
-
-***********************************************
-_`Create External Network Connectivity ext-net`
-***********************************************
-
-# Place holder for instructions of how to create ext-net
-
-***********************************************************
-_`Create IPv4 Subnet and Router with External Connectivity`
-***********************************************************
-
-# Place holder for instructions of how to create IPv4 subnet and router associated with
-
-***********************************************************
-_`Create IPv6 Subnet and Router with External Connectivity`
-***********************************************************
-
-# Place holder for instructions of how to create IPv6 subnet and router associated with
-
-*****************************************************
-_`Prepare Image, Metadata and Keypair for Service VM`
-*****************************************************
-
-# Place holder for instructions of how to get the image and prepare the metadata for service VM, and how to add keypairs
-
-*********************************************************
-_`Boot Service VM (vRouter) and other VMs in IPv6 Subnet`
-*********************************************************
-
+OPNFV Brahmaputra Release.
+
+If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1.
+
+# Place holder for instructions of how to disable odl-l3 and enable neutron-l3-agent
+
+**********************
+_`Start Open Daylight`
+**********************
+
+# Place holder for instructions of how to start Open Daylight
+
+*******************
+_`Start Open Stack`
+*******************
+
+# Place holder for instructions of how to start Open Stack
+
+***********************************************
+_`Create External Network Connectivity ext-net`
+***********************************************
+
+# Place holder for instructions of how to create ext-net
+
+***********************************************************
+_`Create IPv4 Subnet and Router with External Connectivity`
+***********************************************************
+
+# Place holder for instructions of how to create IPv4 subnet and router associated with ext-net
+
+***********************************************************
+_`Create IPv6 Subnet and Router with External Connectivity`
+***********************************************************
+
+# Place holder for instructions of how to create IPv6 subnet and router associated with ext-net
+
+*****************************************************
+_`Prepare Image, Metadata and Keypair for Service VM`
+*****************************************************
+
+# Place holder for instructions of how to get the image and prepare the metadata for service VM, and how to add keypairs
+
+*********************************************************
+_`Boot Service VM (vRouter) and other VMs in IPv6 Subnet`
+*********************************************************
+
 # Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same Ipv6
-subnet for testing purpose
-
-*************************
-_`Spawn RADVD in vRouter`
-*************************
-
-# Place holder for instructions of how to spawn the RADVD daemon in vRouter
-
-***********************************
-_`Testing to Verify Setup Complete`
-***********************************
-
-# Place holder for instructions of how to test and verify that the setup is complete
-
-*************
-_`Next Steps`
-*************
-
+subnet for testing purpose
+
+*************************
+_`Spawn RADVD in vRouter`
+*************************
+
+# Place holder for instructions of how to spawn the RADVD daemon in vRouter
+
+***********************************
+_`Testing to Verify Setup Complete`
+***********************************
+
+# Place holder for instructions of how to test and verify that the setup is complete
+
+*************
+_`Next Steps`
+*************
+
 Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
 open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this
-IPv6 vRouter.
-
+IPv6 vRouter.
+