diff options
Diffstat (limited to 'docs/configguide/index.rst')
| -rw-r--r-- | docs/configguide/index.rst | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst new file mode 100644 index 0000000..75c925b --- /dev/null +++ b/docs/configguide/index.rst @@ -0,0 +1,188 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat) + +========================================= +Install OPNFV on IPv6-Only Infrastructure +========================================= + +This section provides instructions to install OPNFV on IPv6-only Infrastructure. All underlay networks +and API endpoints will be IPv6-only except: + +1. "admin" network in underlay/undercloud still has to be IPv4, due to lack of support of IPMI + over IPv6 or PXE over IPv6. +2. OVS VxLAN (or GRE) tunnel endpoint is still IPv4 only, although IPv6 traffic can be + encapsulated within the tunnel. +3. Metadata server is still IPv4 only. + +Except the limitations above, the use case scenario of the IPv6-only infrastructure includes: + +1. Support OPNFV deployment on an IPv6 only infrastructure. +2. Horizon/ODL-DLUX access using IPv6 address from an external host. +3. OpenStack API access using IPv6 addresses from various python-clients. +4. Ability to create Neutron Routers, IPv6 subnets (e.g. SLAAC/DHCPv6-Stateful/ + DHCPv6-Stateless) to support North-South traffic. +5. Inter VM communication (East-West traffic) when one of the VM is on Controller node + and the other on the Compute node. +6. VNC access into a VM using IPv6 addresses. + +------------------------------------------- +Install OPNFV in OpenStack-Only Environment +------------------------------------------- + +**Apex Installer**: + +.. code-block:: bash + + # HA, Virtual deployment in OpenStack-only environment + ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ + -n /etc/opnfv-apex/network_setting_v6.yaml + + # HA, Bare Metal deployment in OpenStack-only environment + ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ + -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml + + # Non-HA, Virtual deployment in OpenStack-only environment + ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ + -n /etc/opnfv-apex/network_setting_v6.yaml + + # Non-HA, Bare Metal deployment in OpenStack-only environment + ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ + -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml + + # Note: + # + # 1. Parameter ""-v" is mandatory for Virtual deployment + # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment + # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file + # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure + +**Joid** Installer: + +.. code-block:: bash + + # HA deployment in OpenStack-only environment + ./deploy.sh -o mitaka -s nosdn -t ha -l default -f ipv6 + + # Non-HA deployment in OpenStack-only environment + ./deploy.sh -o mitaka -s nosdn -t nonha -l default -f ipv6 + +Please **NOTE** that: + +* You need to refer to **installer's documentation** for other necessary + parameters applicable to your deployment. +* You need to refer to **Release Notes** and **installer's documentation** if there is + any issue in installation. + +-------------------------------------------------- +Install OPNFV in OpenStack with ODL-L2 Environment +-------------------------------------------------- + +**Apex Installer**: + +.. code-block:: bash + + # HA, Virtual deployment in OpenStack with Open Daylight L2-only environment + ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ + -n /etc/opnfv-apex/network_setting_v6.yaml + + # HA, Bare Metal deployment in OpenStack with Open Daylight L2-only environment + ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ + -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml + + # Non-HA deployment in OpenStack with Open Daylight L2-only environment + # There is no settings file provided by default for odl_l2 non-HA deployment + # You need to copy /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml to another file + # e.g. /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml + # and change the "ha_enabled" parameter to be "false", i.e.: "ha_enabled: false", and: + + # - For Non-HA, Virtual deployment + ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ + -n /etc/opnfv-apex/network_setting_v6.yaml + + # - For Non-HA, Bare Metal deployment + ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ + -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml + + # Note: + # + # 1. Parameter ""-v" is mandatory for Virtual deployment + # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment + # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file + # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure + +**Joid** Installer: + +.. code-block:: bash + + # HA deployment in OpenStack with Open Daylight L2-only environment + ./deploy.sh -o mitaka -s odl -t ha -l default -f ipv6 + + # Non-HA deployment in OpenStack with Open Daylight L2-only environment + ./deploy.sh -o mitaka -s odl -t nonha -l default -f ipv6 + +Please **NOTE** that: + +* You need to refer to **installer's documentation** for other necessary + parameters applicable to your deployment. +* You need to refer to **Release Notes** and **installer's documentation** if there is + any issue in installation. + +------------------- +Testing Methodology +------------------- + +There are 2 levels of testing to validate the deployment. + +++++++++++++++++ +Underlay Testing +++++++++++++++++ + +**Underlay** Testing is to validate that API endpoints are listening on IPv6 addresses. +This can be as simple as validating Keystone service, and as complete as validating each +API endpoint. It is important to reuse Tempest API testing. + +Please **Note** that, to the best of our knowledge, Tempest API testing does not validate +API endpoints listening on IPv6 addresses. Thus Underlay Testing is postponed to future +release until Tempest API testing is ready to validate API endpoints listening on IPv6 addresses. + ++++++++++++++++ +Overlay Testing ++++++++++++++++ + +**Overlay** Testing is to validate that IPv6 is supported in tenant networks, subnets and routers. +Tempest Scenario testing covers the following overlay IPv6 scenarios: + +.. code-block:: bash + + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port + tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet + tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet + tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility + tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks + tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets + tempest.api.network.test_networks.NetworksIpV6Test.test_show_network + tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_create_update_delete_network_subnet + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_external_network_visibility + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_networks + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_subnets + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_network + tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_subnet + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups + tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port + tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports + tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port + tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces + tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id + tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id + tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule + tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups + +The above scenarios are quite comprehensive to validate IPv6 tenant networks. We are using above +Tempest Scenario testing as Smoke Test in FuncTest, which is integrated into OPNFV's CI/CD environment. + |