diff options
| -rw-r--r-- | docs/setupservicevm/4-ipv6-configguide-servicevm.rst | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst index 0cd4e34..077b091 100644 --- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst +++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst @@ -117,9 +117,19 @@ Create IPv4 Subnet and Router with External Connectivity **SETUP-SVM-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the data-center physical network setup. +Please **NOTE** that if you use a different installer, i.e. NOT ``devstack``, your installer +may have already created an external network during installation. Under this circumstance, +you may only need to create the subnet of ``ext-net``. When you create the subnet, you must +use the same name of external network that your installer creates. + .. code-block:: bash + # If you use a different installer and it has already created an external work, + # Please skip this command "net-create" neutron net-create --router:external ext-net + + # If you use a different installer and it has already created an external work, + # Change the name "ext-net" to match the name of external network that your installer has created neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 Please note that the IP addresses in the command above are for exemplary purpose. **Please replace the IP addresses of @@ -129,6 +139,8 @@ your actual network**. .. code-block:: bash + # If you use a different installer and it has already created an external work, + # Change the name "ext-net" to match the name of external network that your installer has created neutron router-gateway-set ipv4-router ext-net **SETUP-SVM-8**: Create an internal/tenant IPv4 network ``ipv4-int-network1`` @@ -166,6 +178,8 @@ IPv6 router. .. code-block:: bash + # If you use a different installer and it has already created an external work, + # Change the name "ext-net" to match the name of external network that your installer has created neutron router-gateway-set ipv6-router ext-net **SETUP-SVM-13**: Create a second internal/tenant IPv4 network ``ipv4-int-network2`` @@ -375,6 +389,8 @@ We use ``floatingip`` mechanism to achieve ``SSH``. .. code-block:: bash # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + # If you use a different installer and it has already created an external work, + # Change the name "ext-net" to match the name of external network that your installer has created neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ awk '{print $2}') ext-net neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ |