diff options
| -rw-r--r-- | docs/configguide/featureconfig.rst | 67 | ||||
| -rw-r--r-- | docs/reldoc/index.rst | 50 |
2 files changed, 74 insertions, 43 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst index b402374..dd22dff 100644 --- a/docs/configguide/featureconfig.rst +++ b/docs/configguide/featureconfig.rst @@ -264,25 +264,30 @@ would be as shown as follows: VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 -**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. - -Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-5** could be in any of the controller -node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to -enter the ``ipv6-router`` namespace. The following command in Neutron will display the -controller on which the ``ipv6-router`` is spawned. +**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash - neutron l3-agent-list-hosting-router ipv6-router - -Then you login to that controller. + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net -To ``SSH`` to ``vRouter``, you can execute the following command. + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' -.. code-block:: bash - - sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') ssh -i ~/vRouterKey fedora@2001:db8:0:1:f816:3eff:fe11:1111 + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> **************************************************************** Setup Manual in OpenStack with Open Daylight L2-Only Environment @@ -689,19 +694,39 @@ interface of ``vRouter`` automatically configures an IPv6 SLAAC address. Testing to Verify Setup Complete -------------------------------- -Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address -using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``. +Now, let us ``SSH`` to those VMs, e.g. VM1 and / or VM2 and / or vRouter, to confirm that +it has successfully configured the IPv6 address using ``SLAAC`` with prefix +``2001:db8:0:2::/64`` from ``vRouter``. -Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command. +We use ``floatingip`` mechanism to achieve ``SSH``. -**SETUP-SVM-31**: ``ssh`` VM1 +**SETUP-SVM-31**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash - ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address> + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net + + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' + + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> -If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify -that IPv6 addresses are configured on ``eth0`` interface. +If everything goes well, ``ssh`` will be successful and you will be logged into those VMs. +Run some commands to verify that IPv6 addresses are configured on ``eth0`` interface. **SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64`` diff --git a/docs/reldoc/index.rst b/docs/reldoc/index.rst index 00caa43..932f429 100644 --- a/docs/reldoc/index.rst +++ b/docs/reldoc/index.rst @@ -264,21 +264,7 @@ would be as shown as follows: VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 -**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. - -Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-5** could be in any of the controller -node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to -enter the ``ipv6-router`` namespace. The following command in Neutron will display the -controller on which the ``ipv6-router`` is spawned. - -.. code-block:: bash - - neutron l3-agent-list-hosting-router ipv6-router - -Then you login to that controller. - -To ``SSH`` to ``vRouter``, you can execute the following command. +**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash @@ -708,19 +694,39 @@ interface of ``vRouter`` automatically configures an IPv6 SLAAC address. Testing to Verify Setup Complete -------------------------------- -Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address -using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``. +Now, let us ``SSH`` to those VMs, e.g. VM1 and / or VM2 and / or vRouter, to confirm that +it has successfully configured the IPv6 address using ``SLAAC`` with prefix +``2001:db8:0:2::/64`` from ``vRouter``. -Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command. +We use ``floatingip`` mechanism to achieve ``SSH``. -**SETUP-SVM-31**: ``ssh`` VM1 +**SETUP-SVM-31**: Now we can ``SSH`` to VMs. You can execute the following command. .. code-block:: bash - ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address> + # 1. Create a floatingip and associate it with VM1, VM2 and vRouter (to the port id that is passed). + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM1 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth0-VM2 | \ + awk '{print $2}') ext-net + neutron floatingip-create --port-id $(neutron port-list | grep -w eth1-vRouter | \ + awk '{print $2}') ext-net + + # 2. To know / display the floatingip associated with VM1, VM2 and vRouter. + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM1 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth0-VM2 | awk '{print $2}') | awk '{print $2}' + neutron floatingip-list -F floating_ip_address -F port_id | grep $(neutron port-list | \ + grep -w eth1-vRouter | awk '{print $2}') | awk '{print $2}' + + # 3. To ssh to the vRouter, VM1 and VM2, user can execute the following command. + ssh -i ~/vRouterKey fedora@<floating-ip-of-vRouter> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM1> + ssh -i ~/vRouterKey cirros@<floating-ip-of-VM2> -If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify -that IPv6 addresses are configured on ``eth0`` interface. +If everything goes well, ``ssh`` will be successful and you will be logged into those VMs. +Run some commands to verify that IPv6 addresses are configured on ``eth0`` interface. **SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64`` |