JIRA:IPVSIX-29

Change-Id: Ie9d1b6d1f4dc71af75b4e0d7859133f7e38846ed
Signed-off-by: Bin Hu <bh526r@att.com>

1 files changed, 0 insertions, 198 deletions

diff --git a/vrouter/setup_service_vm.rst b/vrouter/setup_service_vm.rst
deleted file mode 100644
index a9c0a87..0000000
--- a/vrouter/setup_service_vm.rst
+++ /dev/null
@@ -1,198 +0,0 @@
-================================================

-Set up a Service VM Running as a vRouter (SLAAC)

-================================================

-

-| # Current network setup for IPv6 router VM on local virtualbox setup

-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3

-| # Network interface enp0s3 is IPv4 for public internet access

-| TYPE="Ethernet"

-| BOOTPROTO="dhcp"

-| DEFROUTE="yes"

-| PEERDNS="yes"

-| PEERROUTES="yes"

-| IPV4_FAILURE_FATAL="no"

-| IPV6INIT="yes"

-| IPV6_AUTOCONF="yes"

-| IPV6_DEFROUTE="yes"

-| IPV6_PEERDNS="yes"

-| IPV6_PEERROUTES="yes"

-| IPV6_FAILURE_FATAL="no"

-| NAME="enp0s3"

-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"

-| DEVICE="enp0s3"

-| ONBOOT="yes"

-

-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8

-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts

-| BOOTPROTO=static

-| IPV6INIT=yes

-| IPV6ADDR="2001:db8:0:2::1/64"

-| NAME=enp0s8

-| UUID=e931a806-2f76-425d-b035-d37813b81df5

-| DEVICE=enp0s8

-| ONBOOT=yes

-| NM_CONTROLLED=no

-

-| # Disable NetworkManager

-| systemctl disable NetworkManager

-

-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed

-| yum install dhcp-common

-| yum install dhcp

-| yum install radvd

-

-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding

-| net.ipv6.conf.all.forwarding=1

-| net.ipv6.conf.enp0s3.accept_ra=2

-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1

-| net.ipv6.conf.enp0s3.router_solicitations=1

-

-| # /etc/radvd.conf

-| interface enp0s8

-| {

-| # This is the primary "on switch" for RADVD

-|     AdvSendAdvert on;     

-| #

-| # These settings determine how often advertisements will be sent every X-Y.

-| # X and Y are in seconds.

-| # With these settings you will be sending a advert every 60 seconds

-| #

-|     MinRtrAdvInterval 60;

-|     MaxRtrAdvInterval 180;

-| #

-| # Disable Mobile IPv6 support

-| #

-|     AdvHomeAgentFlag off;

-| #

-| # Here we set our managed flags

-| #

-|     AdvManagedFlag on;

-|     AdvOtherConfigFlag on;

-| #

-| # Enter our IPv6 prefix and CIDR

-| #

-|     prefix 2001:db8:0:2::/64

-|     {

-|         AdvOnLink on;

-| # On link tells the host that the default router is on the same "link" as it is

-|         AdvAutonomous on;

-|         AdvRouterAddr off;

-|     };

-| };

-

-# Enable radvd service

-systemctl enable radvd

-

-# In /etc/sysconfig/network add

-IPV6FORWARDING=yes

-

-=================================================================

-Set up a Service VM Running as a vRouter (DHCPv6 Stateful Server)

-=================================================================

-

-| # Current network setup for IPv6 router VM on local virtualbox setup

-| # /etc/sysconfig/network-scripts/ifcfg-enp0s3

-| # Network interface enp0s3 is IPv4 for public internet access

-| TYPE="Ethernet"

-| BOOTPROTO="dhcp"

-| DEFROUTE="yes"

-| PEERDNS="yes"

-| PEERROUTES="yes"

-| IPV4_FAILURE_FATAL="no"

-| IPV6INIT="yes"

-| IPV6_AUTOCONF="yes"

-| IPV6_DEFROUTE="yes"

-| IPV6_PEERDNS="yes"

-| IPV6_PEERROUTES="yes"

-| IPV6_FAILURE_FATAL="no"

-| NAME="enp0s3"

-| UUID="32bad876-680a-4f78-a364-726eae21bfcf"

-| DEVICE="enp0s3"

-| ONBOOT="yes"

-

-| # /etc/sysconfig/network-scripts/ifcfg-enp0s8

-| # Network interface enp0s8 is IPv6 internal interface to provide IPv6 to internal hosts

-| BOOTPROTO=static

-| IPV6INIT=yes

-| IPV6ADDR="2001:db8:0:2::1/64"

-| NAME=enp0s8

-| UUID=e931a806-2f76-425d-b035-d37813b81df5

-| DEVICE=enp0s8

-| ONBOOT=yes

-| NM_CONTROLLED=no

-

-| # Disable NetworkManager

-| systemctl disable NetworkManager

-

-| # Install dhcp.x86_64, dhcp-common.x86_64, radvd.x86_64 if not already installed

-| yum install dhcp-common

-| yum install dhcp

-| yum install radvd

-

-| # /etc/sysctl.conf Set sysctl to enable IPv6 forwarding

-| net.ipv6.conf.all.forwarding=1

-| net.ipv6.conf.enp0s3.accept_ra=2

-| net.ipv6.conf.enp0s3.accept_ra_defrtr=1

-| net.ipv6.conf.enp0s3.router_solicitations=1

-

-| # /etc/dhcp/dhcpd6.conf

-| # DHCP for IPv6 Server Configuration file.

-

-| # Enable RFC 5007 support (same than for DHCPv4)

-    allow leasequery;

-

-| # IPv6 address valid lifetime

-| #  (at the end the address is no longer usable by the client)

-| #  (set to 30 days, the usual IPv6 default)

-|     default-lease-time 2592000;

-

-| # IPv6 address preferred lifetime

-| #  (at the end the address is deprecated, i.e., the client should use

-| #   other addresses for new connections)

-| #  (set to 7 days, the  usual IPv6 default)

-|     preferred-lifetime 604800;

-

-| # T1, the delay before Renew

-| #  (default is 1/2 preferred lifetime)

-| #  (set to 1 hour)

-|     option dhcp-renewal-time 3600;

-

-| # T2, the delay before Rebind (if Renews failed)

-| #  (default is 3/4 preferred lifetime)

-| #  (set to 2 hours)

-|     option dhcp-rebinding-time 7200;

-

-| # The path of the lease file

-|     dhcpv6-lease-file-name "/var/lib/dhcpd/dhcpd6.leases";

-

-| # Set preference to 255 (maximum) in order to avoid waiting for

-| # additional servers when there is only one

-|     option dhcp6.preference 255;

-

-| # Server side command to enable rapid-commit (2 packet exchange)

-|     option dhcp6.rapid-commit;

-

-| # The delay before information-request refresh

-| #  (minimum is 10 minutes, maximum one day, default is to not refresh)

-| #  (set to 6 hours)

-    option dhcp6.info-refresh-time 21600;

-

-| # Set this to `interim` when doing ddns updates

-|     ddns-update-style interim;

-| 

-|     subnet6 2001:db8:0:2::/64 {

-|         option dhcp6.name-servers 2001:db8:0:2::1;

-|         option dhcp6.domain-search "opnfv.local";

-|         ddns-hostname = concat(binary-to-ascii(10, 8, "-", leased-address), ".wired");

-|         ddns-domainname = "opnfv.local";

-| # Our address range 1000 through 1fff

-|         range6 2001:db8:0:2::1000 2001:db8:0:2::1fff;

-|     }

-| 

-| # In /etc/sysconfig/network add

-| IPV6FORWARDING=yes

-

-For reference, refer to `How to set up RADVd DHCPv6 and DNS on CentOS 6`_.

-

-.. _`How to set up RADVd DHCPv6 and DNS on CentOS 6`: http://www.percula.info/archives/196

-