JIRA: IPVSIX-29

Change-Id: Ie47c45d5ffbfac889ce15ac8fe612498a3f69443
Signed-off-by: Bin Hu <bh526r@att.com>

1 files changed, 35 insertions, 20 deletions

diff --git a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
index d4208bc..6bc0dd9 100644
--- a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
+++ b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
@@ -13,32 +13,43 @@ For exemplary purpose, we assume:
 
 **OS-M-2**: Update the packages and install git
 
-   ``sudo apt-get update -y``
+.. code-block:: bash
 
-   ``sudo apt-get install -y git``
+    sudo apt-get update -y
+    sudo apt-get install -y git
 
 **OS-M-3**: Download devstack and switch to stable/kilo branch
 
-   ``git clone https://github.com/openstack-dev/devstack.git -b stable/kilo``
+.. code-block:: bash
+
+    git clone https://github.com/openstack-dev/devstack.git -b stable/kilo
 
 **OS-M-4**: Start a new terminal, and change directory to where OpenStack is installed.
 
-   ``cd ~/devstack``
+.. code-block:: bash
+
+    cd ~/devstack
 
 **OS-M-5**: Create a ``local.conf`` file with the contents from the following URL.
 
-   ``http://fpaste.org/276958/44395955/``
+.. code-block:: bash
+
+    http://fpaste.org/276958/44395955/
+
+Please Note:
 
 *Note 1: you need to change the IP address of ``SERVICE_HOST`` to point to your actual IP address
-of OpenStack Controller.
+  of OpenStack Controller.
 *Note 2: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address
-of Open Daylight Controller.
+  of Open Daylight Controller.
 *Note 3: You may have to change the value of ``ODL_PROVIDER_MAPPINGS`` and ``PUBLIC_INTERFACE``
-to match your actual network interface.
+  to match your actual network interface.
 
 **OS-M-6**: Initiate Openstack setup by invoking ``stack.sh``
 
-   ``./stack.sh``
+.. code-block:: bash
+
+    ./stack.sh
 
 **OS-M-7**: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf``
 to lock the codebase. Devstack uses these configuration parameters to determine if it has to run with
@@ -46,19 +57,23 @@ the existing codebase or update to the latest copy.
 
 **OS-M-8**: Source the credentials.
 
-   ``opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo``
+.. code-block:: bash
+
+    opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo
 
 **OS-M-9**: Verify some commands to check if setup is working fine.
 
-    ``opnfv@opnfv-os-controller:~/devstack$ nova flavor-list``
-|    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-|    | ID | Name      | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
-|    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-|    | 1  | m1.tiny   | 512       | 1    | 0         |      | 1     | 1.0         | True      |
-|    | 2  | m1.small  | 2048      | 20   | 0         |      | 1     | 1.0         | True      |
-|    | 3  | m1.medium | 4096      | 40   | 0         |      | 2     | 1.0         | True      |
-|    | 4  | m1.large  | 8192      | 80   | 0         |      | 4     | 1.0         | True      |
-|    | 5  | m1.xlarge | 16384     | 160  | 0         |      | 8     | 1.0         | True      |
-|    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
+.. code-block:: bash
+
+    opnfv@opnfv-os-controller:~/devstack$ nova flavor-list
+    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
+    | ID | Name      | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
+    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
+    | 1  | m1.tiny   | 512       | 1    | 0         |      | 1     | 1.0         | True      |
+    | 2  | m1.small  | 2048      | 20   | 0         |      | 1     | 1.0         | True      |
+    | 3  | m1.medium | 4096      | 40   | 0         |      | 2     | 1.0         | True      |
+    | 4  | m1.large  | 8192      | 80   | 0         |      | 4     | 1.0         | True      |
+    | 5  | m1.xlarge | 16384     | 160  | 0         |      | 8     | 1.0         | True      |
+    +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
 
 Now you can start to set up the service VM as an IPv6 vRouter in the environment of OpenStack and Open Daylight.