JIRA: IPVSIX-29

Change-Id: Icb4831a33e2ecf6f39330e331183799389dd1fb2
Signed-off-by: Bin Hu <bh526r@att.com>

1 files changed, 98 insertions, 98 deletions

diff --git a/docs/configguide/ipv6-configguide.rst b/docs/configguide/ipv6-configguide.rst
index 7a508bd..64f02a1 100644
--- a/docs/configguide/ipv6-configguide.rst
+++ b/docs/configguide/ipv6-configguide.rst
@@ -1,103 +1,103 @@
-==========================================

-Setting Up a Service VM as an IPv6 vRouter

-==========================================

-

+==========================================
+Setting Up a Service VM as an IPv6 vRouter
+==========================================
+
 After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 10
-steps to set up a service VM as an IPv6 vRouter:

-

-- Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_

-

-- Step 1: `Start Open Daylight`_

-

-- Step 2: `Start Open Stack`_

-

-- Step 3: `Create External Network Connectivity ext-net`_

-
-- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_

-

-- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_

-

-- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_

-

-- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_

-

-- Step 8: `Spawn RADVD in vRouter`_

-

-- Step 9: `Testing to Verify Setup Complete`#_

-

-Once the setup is complete, you can go to `Next Steps`_.

-

-*********************************************

-_`Disable odl-l3 and Enable neutron-l3-agent`

-*********************************************

-

+steps to set up a service VM as an IPv6 vRouter:
+
+- Step 0: `Disable odl-l3 and Enable neutron-l3-agent`_
+
+- Step 1: `Start Open Daylight`_
+
+- Step 2: `Start Open Stack`_
+
+- Step 3: `Create External Network Connectivity ext-net`_
+
+- Step 4: `Create IPv4 Subnet and Router with External Connectivity`_
+
+- Step 5: `Create IPv6 Subnet and Router with External Connectivity`_
+
+- Step 6: `Prepare Image, Metadata and Keypair for Service VM`_
+
+- Step 7: `Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_
+
+- Step 8: `Spawn RADVD in vRouter`_
+
+- Step 9: `Testing to Verify Setup Complete`_
+
+Once the setup is complete, you can go to `Next Steps`_.
+
+*********************************************
+_`Disable odl-l3 and Enable neutron-l3-agent`
+*********************************************
+
 This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of
-OPNFV Brahmaputra Release.

-

-If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1.

-

-# Place holder for instructions of how to disable odl-l3 and enable neutron-l3-agent

-

-**********************

-_`Start Open Daylight` 

-**********************

-

-# Place holder for instructions of how to start Open Daylight

-

-*******************

-_`Start Open Stack`

-*******************

-

-# Place holder for instructions of how to start Open Stack

-

-***********************************************

-_`Create External Network Connectivity ext-net`

-***********************************************

-

-# Place holder for instructions of how to create ext-net

-

-***********************************************************

-_`Create IPv4 Subnet and Router with External Connectivity`

-***********************************************************

-

-# Place holder for instructions of how to create IPv4 subnet and router associated with

-

-***********************************************************

-_`Create IPv6 Subnet and Router with External Connectivity`

-***********************************************************

-

-# Place holder for instructions of how to create IPv6 subnet and router associated with

-

-*****************************************************

-_`Prepare Image, Metadata and Keypair for Service VM`

-*****************************************************

-

-# Place holder for instructions of how to get the image and prepare the metadata for service VM, and how to add keypairs

-

-*********************************************************

-_`Boot Service VM (vRouter) and other VMs in IPv6 Subnet`

-*********************************************************

-

+OPNFV Brahmaputra Release.
+
+If you have chosen to enable neutron-l3-agent through previous chapters, please skip this step and directly go to Step 1.
+
+# Place holder for instructions of how to disable odl-l3 and enable neutron-l3-agent
+
+**********************
+_`Start Open Daylight`
+**********************
+
+# Place holder for instructions of how to start Open Daylight
+
+*******************
+_`Start Open Stack`
+*******************
+
+# Place holder for instructions of how to start Open Stack
+
+***********************************************
+_`Create External Network Connectivity ext-net`
+***********************************************
+
+# Place holder for instructions of how to create ext-net
+
+***********************************************************
+_`Create IPv4 Subnet and Router with External Connectivity`
+***********************************************************
+
+# Place holder for instructions of how to create IPv4 subnet and router associated with ext-net
+
+***********************************************************
+_`Create IPv6 Subnet and Router with External Connectivity`
+***********************************************************
+
+# Place holder for instructions of how to create IPv6 subnet and router associated with ext-net
+
+*****************************************************
+_`Prepare Image, Metadata and Keypair for Service VM`
+*****************************************************
+
+# Place holder for instructions of how to get the image and prepare the metadata for service VM, and how to add keypairs
+
+*********************************************************
+_`Boot Service VM (vRouter) and other VMs in IPv6 Subnet`
+*********************************************************
+
 # Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same Ipv6
-subnet for testing purpose

-

-*************************

-_`Spawn RADVD in vRouter`

-*************************

-

-# Place holder for instructions of how to spawn the RADVD daemon in vRouter

-

-***********************************

-_`Testing to Verify Setup Complete`

-***********************************

-

-# Place holder for instructions of how to test and verify that the setup is complete

-

-*************

-_`Next Steps`

-*************

-

+subnet for testing purpose
+
+*************************
+_`Spawn RADVD in vRouter`
+*************************
+
+# Place holder for instructions of how to spawn the RADVD daemon in vRouter
+
+***********************************
+_`Testing to Verify Setup Complete`
+***********************************
+
+# Place holder for instructions of how to test and verify that the setup is complete
+
+*************
+_`Next Steps`
+*************
+
 Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
 open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on this
-IPv6 vRouter.

-

+IPv6 vRouter.
+