diff options
author | 2016-01-17 20:49:58 -0800 | |
---|---|---|
committer | 2016-01-18 04:54:07 +0000 | |
commit | 5e102a5a80717600efb191b8e75e553a52d6bed5 (patch) | |
tree | f5f4b7d29643648511be7fccd69e947b9f86b755 /docs/configguide/option-odl-l2.rst | |
parent | a1d2f2c7bd6618f5c67bf04141ede50846ec30fb (diff) |
JIRA:IPVSIX-29
Change-Id: I9b1bcd3464fd3af30346df696e4d2d12de166d42
Signed-off-by: Bin Hu <bh526r@att.com>
(cherry picked from commit 941085f6935c1ade0edabf0e89e44ae5255b87f2)
Diffstat (limited to 'docs/configguide/option-odl-l2.rst')
-rw-r--r-- | docs/configguide/option-odl-l2.rst | 398 |
1 files changed, 0 insertions, 398 deletions
diff --git a/docs/configguide/option-odl-l2.rst b/docs/configguide/option-odl-l2.rst deleted file mode 100644 index 42fb527..0000000 --- a/docs/configguide/option-odl-l2.rst +++ /dev/null @@ -1,398 +0,0 @@ -======================================================== -Setup in OpenStack and Open Daylight L2-Only Environment -======================================================== - -If you intend to set up a service VM as an IPv6 vRouter in an environment of OpenStack -and Open Daylight L2-only of OPNFV Brahmaputra Release base platform, the instructions -are as follows. - -Please **NOTE** that: - -* The hostnames, IP addresses, and username are for exemplary purpose in instructions. - Please change as needed to fit your environment. -* The instructions apply to both deployment model of single controller node and - HA (High Availability) deployment model where multiple controller nodes are used. -* However, in case of HA, when ``ipv6-router`` is created in step **SETUP-SVM-11**, - it could be created in any of the controller node. Thus you need to identify in which - controller node ``ipv6-router`` is created in order to manually spawn ``radvd`` daemon - inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through **SETUP-SVM-30**. - -***************************** -Install OPNFV and Preparation -***************************** - -**OPNFV-INSTALL-1**: To install pure OpenStack option of OPNFV Brahmaputra Release: - -.. code-block:: bash - - deploy --scenario os_odl-l2_ha - -**OPNFV-INSTALL-2**: Clone the following GitHub repository to get the -configuration and metadata files - -.. code-block:: bash - - git clone https://github.com/sridhargaddam/opnfv_os_ipv6_poc.git /opt/stack/opnfv_os_ipv6_poc - -*************************************************** -Source the Credentials in OpenStack Controller Node -*************************************************** - -**SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal, -and change directory to where OpenStack is installed. - -**SETUP-SVM-2**: Source the credentials. - -.. code-block:: bash - - source openrc admin demo - -************************************** -Add External Connectivity to ``br-ex`` -************************************** - -In OpenStack Controller Node, ``eth1`` is configured to provide external/public connectivity -for both IPv4 and IPv6 (optional). So let us add this interface to ``br-ex`` and move the IP address, including the -default route from ``eth1`` to ``br-ex``. - -**SETUP-SVM-3**: Add ``eth1`` to ``br-ex`` and move the IP address and the default route from ``eth1`` to ``br-ex`` - -.. code-block:: bash - - sudo ip addr del 198.59.156.113/24 dev eth1 - sudo ovs-vsctl add-port br-ex eth1 - sudo ifconfig eth1 up - sudo ip addr add 198.59.156.113/24 dev br-ex - sudo ifconfig br-ex up - sudo ip route add default via 198.59.156.1 dev br-ex - -Please note that: - -* The IP address ``198.59.156.113`` and related subnet and gateway addressed in the command - below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**. -* **This can be automated in /etc/network/interfaces**. - -**SETUP-SVM-4**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on -``br-ex`` - -.. code-block:: bash - - $ ip a s br-ex - 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default - link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff - inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex - valid_lft forever preferred_lft forever - inet6 fe80::543e:28ff:fe70:4426/64 scope link - valid_lft forever preferred_lft forever - $ - $ ip route - default via 198.59.156.1 dev br-ex - 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10 - 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 - 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113 - -Please note that The IP addresses above are exemplary purpose - -******************************************************** -Create IPv4 Subnet and Router with External Connectivity -******************************************************** - -**SETUP-SVM-5**: Create a Neutron router ``ipv4-router`` which needs to provide external connectivity. - -.. code-block:: bash - - neutron router-create ipv4-router - -**SETUP-SVM-6**: Create an external network/subnet ``ext-net`` using the appropriate values based on the -data-center physical network setup. - -.. code-block:: bash - - neutron net-create --router:external ext-net - neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24 - -Please note that the IP addresses in the command above are for exemplary purpose. **Please replace the IP addresses of -your actual network**. - -**SETUP-SVM-7**: Associate the ``ext-net`` to the Neutron router ``ipv4-router``. - -.. code-block:: bash - - neutron router-gateway-set ipv4-router ext-net - -**SETUP-SVM-8**: Create an internal/tenant IPv4 network ``ipv4-int-network1`` - -.. code-block:: bash - - neutron net-create ipv4-int-network1 - -**SETUP-SVM-9**: Create an IPv4 subnet ``ipv4-int-subnet1`` in the internal network ``ipv4-int-network1`` - -.. code-block:: bash - - neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24 - -**SETUP-SVM-10**: Associate the IPv4 internal subnet ``ipv4-int-subnet1`` to the Neutron router ``ipv4-router``. - -.. code-block:: bash - - neutron router-interface-add ipv4-router ipv4-int-subnet1 - -******************************************************** -Create IPv6 Subnet and Router with External Connectivity -******************************************************** - -Now, let us create a second neutron router where we can "manually" spawn a ``radvd`` daemon to simulate an external -IPv6 router. - -**SETUP-SVM-11**: Create a second Neutron router ``ipv6-router`` which needs to provide external connectivity - -.. code-block:: bash - - neutron router-create ipv6-router - -**SETUP-SVM-12**: Associate the ``ext-net`` to the Neutron router ``ipv6-router`` - -.. code-block:: bash - - neutron router-gateway-set ipv6-router ext-net - -**SETUP-SVM-13**: Create a second internal/tenant IPv4 network ``ipv4-int-network2`` - -.. code-block:: bash - - neutron net-create ipv4-int-network2 - -**SETUP-SVM-14**: Create an IPv4 subnet ``ipv4-int-subnet2`` for the ``ipv6-router`` internal network -``ipv4-int-network2`` - -.. code-block:: bash - - neutron subnet-create --name ipv4-int-subnet2 --dns-nameserver 8.8.8.8 ipv4-int-network2 10.0.0.0/24 - -**SETUP-SVM-15**: Associate the IPv4 internal subnet ``ipv4-int-subnet2`` to the Neutron router ``ipv6-router``. - -.. code-block:: bash - - neutron router-interface-add ipv6-router ipv4-int-subnet2 - -************************************************** -Prepare Image, Metadata and Keypair for Service VM -************************************************** - -**SETUP-SVM-16**: Download ``fedora22`` image which would be used as ``vRouter`` - -.. code-block:: bash - - glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --is-public true --copy-from https://download.fedoraproject.org/pub/fedora/linux/releases/22/Cloud/x86_64/Images/Fedora-Cloud-Base-22-20150521.x86_64.qcow2 - -**SETUP-SVM-17**: Create a keypair - -.. code-block:: bash - - nova keypair-add vRouterKey > ~/vRouterKey - -**SETUP-SVM-18**: Create ports for ``vRouter`` and both the VMs with some specific MAC addresses. - -.. code-block:: bash - - neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv4-int-network2 - neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1 - neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1 - neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1 - -********************************************************************************************************** -Boot Service VM (``vRouter``) with ``eth0`` on ``ipv4-int-network2`` and ``eth1`` on ``ipv4-int-network1`` -********************************************************************************************************** - -Let us boot the service VM (``vRouter``) with ``eth0`` interface on ``ipv4-int-network2`` connecting to ``ipv6-router``, -and ``eth1`` interface on ``ipv4-int-network1`` connecting to ``ipv4-router``. - -**SETUP-SVM-19**: Boot the ``vRouter`` using ``Fedora22`` image on the OpenStack Compute Node with hostname -``opnfv-os-compute`` - -.. code-block:: bash - - nova boot --image Fedora22 --flavor m1.small --user-data /opt/stack/opnfv_os_ipv6_poc/metadata.txt --availability-zone nova:opnfv-os-compute --nic port-id=$(neutron port-list | grep -w eth0-vRouter | awk '{print $2}') --nic port-id=$(neutron port-list | grep -w eth1-vRouter | awk '{print $2}') --key-name vRouterKey vRouter - -Please **note** that ``/opt/stack/opnfv_os_ipv6_poc/metadata.txt`` is used to enable the ``vRouter`` to automatically -spawn a ``radvd``, and - -* Act as an IPv6 vRouter which advertises the RA (Router Advertisements) with prefix - ``2001:db8:0:2::/64`` on its internal interface (``eth1``). -* Forward IPv6 traffic from internal interface (``eth1``) - -**SETUP-SVM-20**: Verify that ``Fedora22`` image boots up successfully and vRouter has ``ssh`` keys properly injected - -.. code-block:: bash - - nova list - nova console-log vRouter - -Please note that **it may take a few minutes** for the necessary packages to get installed and ``ssh`` keys -to be injected. - -.. code-block:: bash - - # Sample Output - [ 762.884523] cloud-init[871]: ec2: ############################################################# - [ 762.909634] cloud-init[871]: ec2: -----BEGIN SSH HOST KEY FINGERPRINTS----- - [ 762.931626] cloud-init[871]: ec2: 2048 e3:dc:3d:4a:bc:b6:b0:77:75:a1:70:a3:d0:2a:47:a9 (RSA) - [ 762.957380] cloud-init[871]: ec2: -----END SSH HOST KEY FINGERPRINTS----- - [ 762.979554] cloud-init[871]: ec2: ############################################################# - -******************************************* -Boot Two Other VMs in ``ipv4-int-network1`` -******************************************* - -In order to verify that the setup is working, let us create two cirros VMs with ``eth1`` interface on the -``ipv4-int-network1``, i.e., connecting to ``vRouter`` ``eth1`` interface for internal network. - -We will have to configure appropriate ``mtu`` on the VMs' interface by taking into account the tunneling -overhead and any physical switch requirements. If so, push the ``mtu`` to the VM either using ``dhcp`` -options or via ``meta-data``. - -**SETUP-SVM-21**: Create VM1 on OpenStack Controller Node with hostname ``opnfv-os-controller`` - -.. code-block:: bash - - nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM1 | awk '{print $2}') --availability-zone nova:opnfv-os-controller --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM1 - -**SETUP-SVM-22**: Create VM2 on OpenStack Compute Node with hostname ``opnfv-os-compute`` - -.. code-block:: bash - - nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2 - -**SETUP-SVM-23**: Confirm that both the VMs are successfully booted. - -.. code-block:: bash - - nova list - nova console-log VM1 - nova console-log VM2 - -********************************** -Spawn ``RADVD`` in ``ipv6-router`` -********************************** - -Let us manually spawn a ``radvd`` daemon inside ``ipv6-router`` namespace to simulate an external router. -First of all, we will have to identify the ``ipv6-router`` namespace and move to the namespace. - -Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **SETUP-SVM-11** could be in any of the controller -node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to manually -spawn ``radvd`` daemon inside the ``ipv6-router`` namespace in steps **SETUP-SVM-24** through -**SETUP-SVM-30**. The following command in Neutron will display the controller on which the -``ipv6-router`` is spawned. - -.. code-block:: bash - - neutron l3-agent-list-hosting-router ipv6-router - -Then you login to that controller and execute steps **SETUP-SVM-24** -through **SETUP-SVM-30** - -**SETUP-SVM-24**: identify the ``ipv6-router`` namespace and move to the namespace - -.. code-block:: bash - - sudo ip netns exec qrouter-$(neutron router-list | grep -w ipv6-router | awk '{print $2}') bash - -**SETUP-SVM-25**: Upon successful execution of the above command, you will be in the router namespace. -Now let us configure the IPv6 address on the <qr-xxx> interface. - -.. code-block:: bash - - export router_interface=$(ip a s | grep -w "global qr-*" | awk '{print $7}') - ip -6 addr add 2001:db8:0:1::1 dev $router_interface - -**SETUP-SVM-26**: Update the sample file ``/opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf`` -with ``$router_interface``. - -.. code-block:: bash - - cp /opt/stack/opnfv_os_ipv6_poc/scenario2/radvd.conf /tmp/radvd.$router_interface.conf - sed -i 's/$router_interface/'$router_interface'/g' /tmp/radvd.$router_interface.conf - -**SETUP-SVM-27**: Spawn a ``radvd`` daemon to simulate an external router. This ``radvd`` daemon advertises an IPv6 -subnet prefix of ``2001:db8:0:1::/64`` using RA (Router Advertisement) on its $router_interface so that ``eth0`` -interface of ``vRouter`` automatically configures an IPv6 SLAAC address. - -.. code-block:: bash - - $radvd -C /tmp/radvd.$router_interface.conf -p /tmp/br-ex.pid.radvd -m syslog - -**SETUP-SVM-28**: Add an IPv6 downstream route pointing to the ``eth0`` interface of vRouter. - -.. code-block:: bash - - ip -6 route add 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111 - -**SETUP-SVM-29**: The routing table should now look similar to something shown below. - -.. code-block:: bash - - ip -6 route show - 2001:db8:0:1::1 dev qr-42968b9e-62 proto kernel metric 256 - 2001:db8:0:1::/64 dev qr-42968b9e-62 proto kernel metric 256 expires 86384sec - 2001:db8:0:2::/64 via 2001:db8:0:1:f816:3eff:fe11:1111 dev qr-42968b9e-62 proto ra metric 1024 expires 29sec - fe80::/64 dev qg-3736e0c7-7c proto kernel metric 256 - fe80::/64 dev qr-42968b9e-62 proto kernel metric 256 - -**SETUP-SVM-30**: If all goes well, the IPv6 addresses assigned to the VMs would be as shown as follows: - -.. code-block:: bash - - vRouter eth0 interface would have the following IPv6 address: 2001:db8:0:1:f816:3eff:fe11:1111/64 - vRouter eth1 interface would have the following IPv6 address: 2001:db8:0:2::1/64 - VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64 - VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64 - -******************************** -Testing to Verify Setup Complete -******************************** - -Now, let us ``ssh`` to one of the VMs, e.g. VM1, to confirm that it has successfully configured the IPv6 address -using ``SLAAC`` with prefix ``2001:db8:0:2::/64`` from ``vRouter``. - -Please note that you need to get the IPv4 address associated to VM1. This can be inferred from ``nova list`` command. - -**SETUP-SVM-31**: ``ssh`` VM1 - -.. code-block:: bash - - ssh -i /home/odl/vRouterKey cirros@<VM1-IPv4-address> - -If everything goes well, ``ssh`` will be successful and you will be logged into VM1. Run some commands to verify -that IPv6 addresses are configured on ``eth0`` interface. - -**SETUP-SVM-32**: Show an IPv6 address with a prefix of ``2001:db8:0:2::/64`` - -.. code-block:: bash - - ip address show - -**SETUP-SVM-33**: ping some external IPv6 address, e.g. ``ipv6-router`` - -.. code-block:: bash - - ping6 2001:db8:0:1::1 - -If the above ping6 command succeeds, it implies that ``vRouter`` was able to successfully forward the IPv6 traffic -to reach external ``ipv6-router``. - -**SETUP-SVM-34**: When all tests show that the setup works as expected, You can now exit the ``ipv6-router`` namespace. - -.. code-block:: bash - - exit - -********** -Next Steps -********** - -Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further -open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on -this IPv6 vRouter. - |