summaryrefslogtreecommitdiffstats
path: root/docs/configguide/featureconfig.rst
diff options
context:
space:
mode:
authorBin Hu <bh526r@att.com>2016-01-16 19:22:32 -0800
committerBin Hu <bh526r@att.com>2016-01-16 19:22:32 -0800
commit9fa2a90eb416cca5006503540004ea7e7cd29705 (patch)
tree9c2a8f605413b10905d3f99a1d77c1d5a2b125ce /docs/configguide/featureconfig.rst
parentaf118dfbe26b83f9fac77fd8070b55f3013e1ce7 (diff)
JIRA:IPVSIX-29
Change-Id: Ib542753d3c819a189170a8a582118354518adecc Signed-off-by: Bin Hu <bh526r@att.com>
Diffstat (limited to 'docs/configguide/featureconfig.rst')
-rw-r--r--docs/configguide/featureconfig.rst143
1 files changed, 53 insertions, 90 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst
index c0cb2e0..e5301a5 100644
--- a/docs/configguide/featureconfig.rst
+++ b/docs/configguide/featureconfig.rst
@@ -89,17 +89,31 @@ Disable Security Groups in OpenStack ML2 Setup
security_group_api = nova
firewall_driver = nova.virt.firewall.NoopFirewallDriver
+**OPNFV-NATIVE-SEC-3**: After updating the settings, you will have to restart the
+``Neutron`` and ``Nova`` services.
+
---------------------------------
Set Up Service VM as IPv6 vRouter
---------------------------------
-**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running. The following
-commands should be executed:
+**OPNFV-NATIVE-SETUP-1**: Now we assume that OpenStack multi-node setup is up and running.
+We have to source the tenant credentials in this step. The following command should be executed:
.. code-block:: bash
+ # source the tenant credentials in OPNFV
+ source /opt/admin-openrc.sh
+
+Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example,
+in ``devstack``, the following command should be used:
+
+.. code-block:: bash
+
+ # source the tenant credentials in devstack
source openrc admin demo
+**Please refer to relevant documentation of installers if you encounter any issue**.
+
**OPNFV-NATIVE-SETUP-2**: Download ``fedora22`` image which would be used for ``vRouter``
.. code-block:: bash
@@ -112,7 +126,14 @@ commands should be executed:
glance image-create --name 'Fedora22' --disk-format qcow2 --container-format bare --file ./Fedora-Cloud-Base-22-20150521.x86_64.qcow2
-**OPNFV-NATIVE-SETUP-4**: Create Neutron routers ``ipv4-router`` and ``ipv6-router``
+**OPNFV-NATIVE-SETUP-4: This Step is Informational. OPNFV Installer has taken care of this Step
+during deployment. You may refer to this Step only if there is any issue, or if you are using other installers**.
+
+We have to move the public network from physical network interface to ``br-ex``, including moving
+the public IP address and setting up default route. Please refer to ``OS-NATIVE-SETUP-4`` and
+``OS-NATIVE-SETUP-5`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.html#set-up-service-vm-as-ipv6-vrouter>`_.
+
+**OPNFV-NATIVE-SETUP-5**: Create Neutron routers ``ipv4-router`` and ``ipv6-router``
which need to provide external connectivity.
.. code-block:: bash
@@ -120,51 +141,15 @@ which need to provide external connectivity.
neutron router-create ipv4-router
neutron router-create ipv6-router
-**OPNFV-NATIVE-SETUP-5**: Create an external network/subnet ``ext-net`` using
+**OPNFV-NATIVE-SETUP-6**: Create an external network/subnet ``ext-net`` using
the appropriate values based on the data-center physical network setup.
.. code-block:: bash
neutron net-create --router:external ext-net
-
-**OPNFV-NATIVE-SETUP-6**: If your OpenStack Controller node has two interfaces ``eth0`` and
-``eth1``, and ``eth1`` is used for external connectivity, move the IP address of ``eth1`` to ``br-ex``.
-
-Please note that the IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
-below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-
-.. code-block:: bash
-
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
neutron subnet-create --disable-dhcp --allocation-pool start=198.59.156.251,end=198.59.156.254 --gateway 198.59.156.1 ext-net 198.59.156.0/24
-**OPNFV-NATIVE-SETUP-7**: Verify that ``br-ex`` now has the original external IP address,
-and that the default route is on ``br-ex``
-
-.. code-block:: bash
-
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
-
-Please note that the IP addresses above are exemplary purpose.
-
-**OPNFV-NATIVE-SETUP-8**: Create Neutron networks ``ipv4-int-network1`` and
+**OPNFV-NATIVE-SETUP-7**: Create Neutron networks ``ipv4-int-network1`` and
``ipv6-int-network2`` with port_security disabled
.. code-block:: bash
@@ -172,7 +157,7 @@ Please note that the IP addresses above are exemplary purpose.
neutron net-create --port_security_enabled=False ipv4-int-network1
neutron net-create --port_security_enabled=False ipv6-int-network2
-**OPNFV-NATIVE-SETUP-9**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network
+**OPNFV-NATIVE-SETUP-8**: Create IPv4 subnet ``ipv4-int-subnet1`` in the internal network
``ipv4-int-network1``, and associate it to ``ipv4-router``.
.. code-block:: bash
@@ -180,7 +165,7 @@ Please note that the IP addresses above are exemplary purpose.
neutron subnet-create --name ipv4-int-subnet1 --dns-nameserver 8.8.8.8 ipv4-int-network1 20.0.0.0/24
neutron router-interface-add ipv4-router ipv4-int-subnet1
-**OPNFV-NATIVE-SETUP-10**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router``
+**OPNFV-NATIVE-SETUP-9**: Associate the ``ext-net`` to the Neutron routers ``ipv4-router``
and ``ipv6-router``.
.. code-block:: bash
@@ -188,7 +173,7 @@ and ``ipv6-router``.
neutron router-gateway-set ipv4-router ext-net
neutron router-gateway-set ipv6-router ext-net
-**OPNFV-NATIVE-SETUP-11**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and
+**OPNFV-NATIVE-SETUP-10**: Create two subnets, one IPv4 subnet ``ipv4-int-subnet2`` and
one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate both subnets to
``ipv6-router``
@@ -199,13 +184,13 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot
neutron router-interface-add ipv6-router ipv4-int-subnet2
neutron router-interface-add ipv6-router ipv6-int-subnet2
-**OPNFV-NATIVE-SETUP-12**: Create a keypair
+**OPNFV-NATIVE-SETUP-11**: Create a keypair
.. code-block:: bash
nova keypair-add vRouterKey > ~/vRouterKey
-**OPNFV-NATIVE-SETUP-13**: Create ports for vRouter (with some specific MAC address
+**OPNFV-NATIVE-SETUP-12**: Create ports for vRouter (with some specific MAC address
- basically for automation - to know the IPv6 addresses that would be assigned to the port).
.. code-block:: bash
@@ -213,21 +198,21 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot
neutron port-create --name eth0-vRouter --mac-address fa:16:3e:11:11:11 ipv6-int-network2
neutron port-create --name eth1-vRouter --mac-address fa:16:3e:22:22:22 ipv4-int-network1
-**OPNFV-NATIVE-SETUP-14**: Create ports for VM1 and VM2.
+**OPNFV-NATIVE-SETUP-13**: Create ports for VM1 and VM2.
.. code-block:: bash
neutron port-create --name eth0-VM1 --mac-address fa:16:3e:33:33:33 ipv4-int-network1
neutron port-create --name eth0-VM2 --mac-address fa:16:3e:44:44:44 ipv4-int-network1
-**OPNFV-NATIVE-SETUP-15**: Update ``ipv6-router`` with routing information to subnet
+**OPNFV-NATIVE-SETUP-14**: Update ``ipv6-router`` with routing information to subnet
``2001:db8:0:2::/64``
.. code-block:: bash
neutron router-update ipv6-router --routes type=dict list=true destination=2001:db8:0:2::/64,nexthop=2001:db8:0:1:f816:3eff:fe11:1111
-**OPNFV-NATIVE-SETUP-16**: Boot Service VM (``vRouter``), VM1 and VM2
+**OPNFV-NATIVE-SETUP-15**: Boot Service VM (``vRouter``), VM1 and VM2
.. code-block:: bash
@@ -238,7 +223,7 @@ one IPv6 subnet ``ipv6-int-subnet2`` in ``ipv6-int-network2``, and associate bot
nova boot --image cirros-0.3.4-x86_64-uec --flavor m1.tiny --nic port-id=$(neutron port-list | grep -w eth0-VM2 | awk '{print $2}') --availability-zone nova:opnfv-os-compute --key-name vRouterKey --user-data /opt/stack/opnfv_os_ipv6_poc/set_mtu.sh VM2
nova list # Verify that all the VMs are in ACTIVE state.
-**OPNFV-NATIVE-SETUP-17**: If all goes well, the IPv6 addresses assigned to the VMs
+**OPNFV-NATIVE-SETUP-16**: If all goes well, the IPv6 addresses assigned to the VMs
would be as shown as follows:
.. code-block:: bash
@@ -248,7 +233,7 @@ would be as shown as follows:
VM1 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe33:3333/64
VM2 would have the following IPv6 address: 2001:db8:0:2:f816:3eff:fe44:4444/64
-**OPNFV-NATIVE-SETUP-18**: Now we can ``SSH`` to ``vRouter``.
+**OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``.
Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller
nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller
@@ -327,56 +312,34 @@ Source the Credentials in OpenStack Controller Node
**SETUP-SVM-1**: Login in OpenStack Controller Node. Start a new terminal,
and change directory to where OpenStack is installed.
-**SETUP-SVM-2**: Source the credentials.
+**SETUP-SVM-2**: We have to source the tenant credentials in this step.
+The following command should be executed:
.. code-block:: bash
- source openrc admin demo
-
---------------------------------------
-Add External Connectivity to ``br-ex``
---------------------------------------
-
-If your OpenStack controller node has two interfaces ``eth0`` and ``eth1``, and ``eth1``
-is used for external connectivity, move the IP address of ``eth1``, including default route to ``br-ex``.
+ # source the tenant credentials in OPNFV
+ source /opt/admin-openrc.sh
-**SETUP-SVM-3**: Add ``eth1`` to ``br-ex`` and move the IP address and the default route from ``eth1`` to ``br-ex``
+Please **NOTE** that the method of sourcing tenant credentials may vary depending on installers. For example,
+in ``devstack``, the following command should be used:
.. code-block:: bash
- sudo ip addr del 198.59.156.113/24 dev eth1
- sudo ovs-vsctl add-port br-ex eth1
- sudo ifconfig eth1 up
- sudo ip addr add 198.59.156.113/24 dev br-ex
- sudo ifconfig br-ex up
- sudo ip route add default via 198.59.156.1 dev br-ex
-
-Please note that:
-
-* The IP address ``198.59.156.113`` and related subnet and gateway addressed in the command
- below are for exemplary purpose. **Please replace them with the IP addresses of your actual network**.
-* **This can be automated in /etc/network/interfaces**.
+ # source the tenant credentials in devstack
+ source openrc admin demo
-**SETUP-SVM-4**: Verify that ``br-ex`` now has the original external IP address, and that the default route is on
-``br-ex``
+**Please refer to relevant documentation of installers if you encounter any issue**.
-.. code-block:: bash
+------------------------------------------------------------------------------------
+Informational Note: Move Public Network from Physical Network Interface to ``br-ex``
+------------------------------------------------------------------------------------
- $ ip a s br-ex
- 38: br-ex: <BROADCAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN group default
- link/ether 00:50:56:82:42:d1 brd ff:ff:ff:ff:ff:ff
- inet 198.59.156.113/24 brd 198.59.156.255 scope global br-ex
- valid_lft forever preferred_lft forever
- inet6 fe80::543e:28ff:fe70:4426/64 scope link
- valid_lft forever preferred_lft forever
- $
- $ ip route
- default via 198.59.156.1 dev br-ex
- 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.10
- 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
- 198.59.156.0/24 dev br-ex proto kernel scope link src 198.59.156.113
+**This Step is Informational. OPNFV Installer has taken care of this Step during deployment.
+You may refer to this Step only if there is any issue, or if you are using other installers**.
-Please note that The IP addresses above are exemplary purpose
+We have to move the public network from physical network interface to ``br-ex``, including moving
+the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and
+``SETUP-SVM-4`` in our `more complete instruction <http://artifacts.opnfv.org/ipv6/docs/setupservicevm/4-ipv6-configguide-servicevm.html#add-external-connectivity-to-br-ex>`_.
--------------------------------------------------------
Create IPv4 Subnet and Router with External Connectivity