diff options
author | 2016-01-18 08:48:46 -0800 | |
---|---|---|
committer | 2016-01-18 16:53:13 +0000 | |
commit | 0b44c9146b3c1a5d71256eb4c4220d0698117846 (patch) | |
tree | d4d6fc83fb1c0ca611793fd010e50e1c06bf80b7 /docs/configguide/featureconfig.rst | |
parent | 9cb2cf7e288564a3d0ae1997e9d1b2290bf92a4f (diff) |
JIRA:IPVSIX-29
Change-Id: Ia90fddf3e705750c0a25e0c7c9eb6f65cb6426a8
Signed-off-by: Bin Hu <bh526r@att.com>
(cherry picked from commit 28329e36c04e0b135fb5aba0087bdce015938595)
Diffstat (limited to 'docs/configguide/featureconfig.rst')
-rw-r--r-- | docs/configguide/featureconfig.rst | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst index 928e675..c27a623 100644 --- a/docs/configguide/featureconfig.rst +++ b/docs/configguide/featureconfig.rst @@ -267,7 +267,7 @@ would be as shown as follows: **OPNFV-NATIVE-SETUP-17**: Now we can ``SSH`` to ``vRouter``. Please **NOTE** that in case of HA (High Availability) deployment model where multiple controller -nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-4** could be in any of the controller +nodes are used, ``ipv6-router`` created in step **OPNFV-NATIVE-SETUP-5** could be in any of the controller node. Thus you need to identify in which controller node ``ipv6-router`` is created in order to enter the ``ipv6-router`` namespace. The following command in Neutron will display the controller on which the ``ipv6-router`` is spawned. @@ -382,8 +382,11 @@ that the method of sourcing tenant credentials may vary depending on installers. Informational Note: Move Public Network from Physical Network Interface to ``br-ex`` ------------------------------------------------------------------------------------ -**This Step is Informational. OPNFV Installer has taken care of this Step during deployment. -You may refer to this Step only if there is any issue, or if you are using other installers**. +**SETUP-SVM-3**: Move the physical interface (i.e. the public network interface) to ``br-ex`` +**SETUP-SVM-4**: Verify setup of ``br-ex`` + +**Those 2 steps are Informational. OPNFV Installer has taken care of those 2 steps during deployment. +You may refer to this step only if there is any issue, or if you are using other installers**. We have to move the physical interface (i.e. the public network interface) to ``br-ex``, including moving the public IP address and setting up default route. Please refer to ``SETUP-SVM-3`` and |