summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBin Hu <bh526r@att.com>2016-02-08 18:16:20 -0800
committerBin Hu <bh526r@att.com>2016-02-08 18:16:20 -0800
commit27855457ae9225e9d98b8fc64316a6cf734ec7df (patch)
treec112733148471eeaeb3e0e2471e59e6481f948cf
parent00dee85d040bd2d059de1f42ea20d4dfb42ada80 (diff)
JIRA:IPVSIX-29 license info for all instructions
Change-Id: I9cebedfba7096f6e40b04a1f10bf9c7c8f55a59e Signed-off-by: Bin Hu <bh526r@att.com>
-rw-r--r--docs/setupservicevm/0-ipv6-configguide-prep-infra.rst4
-rw-r--r--docs/setupservicevm/1-ipv6-configguide-odl-setup.rst4
-rw-r--r--docs/setupservicevm/2-ipv6-configguide-os-controller.rst4
-rw-r--r--docs/setupservicevm/3-ipv6-configguide-os-compute.rst4
-rw-r--r--docs/setupservicevm/4-ipv6-configguide-servicevm.rst4
-rw-r--r--docs/setupservicevm/architecture-design.rst4
-rw-r--r--docs/setupservicevm/index.rst4
-rw-r--r--docs/setupservicevm/ipv6-configguide.rst263
-rw-r--r--docs/setupservicevm/scenario-2.rst4
-rw-r--r--docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst4
-rw-r--r--docs/setupservicevm/scenario-3-1-ipv6-configguide-odl-setup.rst4
-rw-r--r--docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst4
-rw-r--r--docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst4
-rw-r--r--docs/setupservicevm/scenario-3.rst4
-rw-r--r--docs/setupservicevm/topology-after-setup.rst4
15 files changed, 56 insertions, 263 deletions
diff --git a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst
index 997e12e..ef064b7 100644
--- a/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst
+++ b/docs/setupservicevm/0-ipv6-configguide-prep-infra.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
====================
Infrastructure Setup
====================
diff --git a/docs/setupservicevm/1-ipv6-configguide-odl-setup.rst b/docs/setupservicevm/1-ipv6-configguide-odl-setup.rst
index a70c596..7f2f488 100644
--- a/docs/setupservicevm/1-ipv6-configguide-odl-setup.rst
+++ b/docs/setupservicevm/1-ipv6-configguide-odl-setup.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
========================================
Setting Up Open Daylight Controller Node
========================================
diff --git a/docs/setupservicevm/2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/2-ipv6-configguide-os-controller.rst
index d9dc2f1..2ecc126 100644
--- a/docs/setupservicevm/2-ipv6-configguide-os-controller.rst
+++ b/docs/setupservicevm/2-ipv6-configguide-os-controller.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
====================================
Setting Up OpenStack Controller Node
====================================
diff --git a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
index 04594c8..8a0ad65 100644
--- a/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
+++ b/docs/setupservicevm/3-ipv6-configguide-os-compute.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
=================================
Setting Up OpenStack Compute Node
=================================
diff --git a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
index d48716d..821670a 100644
--- a/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
+++ b/docs/setupservicevm/4-ipv6-configguide-servicevm.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
==========================================
Setting Up a Service VM as an IPv6 vRouter
==========================================
diff --git a/docs/setupservicevm/architecture-design.rst b/docs/setupservicevm/architecture-design.rst
index e2546ca..265aa6d 100644
--- a/docs/setupservicevm/architecture-design.rst
+++ b/docs/setupservicevm/architecture-design.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
====================
Architectural Design
====================
diff --git a/docs/setupservicevm/index.rst b/docs/setupservicevm/index.rst
index d60b172..02f5d06 100644
--- a/docs/setupservicevm/index.rst
+++ b/docs/setupservicevm/index.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
==========================================
Setting Up a Service VM as an IPv6 vRouter
==========================================
diff --git a/docs/setupservicevm/ipv6-configguide.rst b/docs/setupservicevm/ipv6-configguide.rst
deleted file mode 100644
index e460c7d..0000000
--- a/docs/setupservicevm/ipv6-configguide.rst
+++ /dev/null
@@ -1,263 +0,0 @@
-==========================================
-Setting Up a Service VM as an IPv6 vRouter
-==========================================
-
-After OPNFV Brahmaputra Release base platform has been successfully installed through previous chapters, there are 11
-steps to set up a service VM as an IPv6 vRouter:
-
-- `Step 1: Disable odl-l3 and Enable neutron-l3-agent`_
-
-- `Step 2: Start Open Daylight`_
-
-- `Step 3: Start Open Stack on Controller Node`_
-
-- `Step 4: Start Open Stack on Compute Node`_
-
-- `Step 5: Create External Network Connectivity ext-net`_
-
-- `Step 6: Create IPv4 Subnet and Router with External Connectivity`_
-
-- `Step 7: Create IPv6 Subnet and Router with External Connectivity`_
-
-- `Step 8: Prepare Image, Metadata and Keypair for Service VM`_
-
-- `Step 9: Boot Service VM (vRouter) and other VMs in IPv6 Subnet`_
-
-- `Step 10: Spawn RADVD in vRouter`_
-
-- `Step 11: Testing to Verify Setup Complete`_
-
-Once the setup is complete, you can go to `Next Steps`_.
-
-*****************************************************
-_`Step 1: Disable odl-l3 and Enable neutron-l3-agent`
-*****************************************************
-
-This step is optional, and only needed if you didn't choose to enable neutron-l3-agent during previous installation of
-OPNFV Brahmaputra Release.
-
-If you have chosen to enable neutron-l3-agent during installation, please skip this step and directly go to
-`Step 2: Start Open Daylight`_.
-
-# Place holder for instructions of how to disable odl-l3 and enable neutron-l3-agent
-
-******************************
-_`Step 2: Start Open Daylight`
-******************************
-
-**Note: we assume that you have installed Open Daylight through OPNFV Installer in prior chapters. However, if Open Daylight is not installed, please go to** ``http://www.opendaylight.org/downloads`` **to download and install Open Daylight**
-
-ODL-1: Login to Open Daylight Controller Node. For the purpose of example, we use ``opnfv`` as username of login, and
-``opnfv-odl-controller`` as hostname of the Open Daylight Controller Node.
-
-ODL-2: Start a new terminal session, and change directory to where Open Daylight is installed. Here we use ``odl``
-directory name and ``Lithium SR2`` installation as an example.
-
- ``cd ~/odl/distribution-karaf-0.3.2-Lithium-SR2/bin``
-
-ODL-3: Run the ``karaf`` shell. Please note that it is recommended to run the command in a ``screen`` session.
-
-| ``screen -S ODL_Controller``
-| ``./karaf``
-
-ODL-4: You are now in the Karaf shell of Open Daylight. To explore the list of available features you can execute
-``feature:list``. In order to enable Open Daylight with Open Stack, you have to load the ``odl-ovsdb-openstack``
-feature.
-
- ``opendaylight-user@opnfv>feature:install odl-ovsdb-openstack``
-
-ODL-5: Verify that OVSDB feature is installed successfully.
-
-| ``opendaylight-user@opnfv>feature:list -i | grep ovsdb``
-| odl-ovsdb-openstack | 1.1.1-Lithium-SR1 | x | ovsdb-1.1.1-Lithium-SR1 | OpenDaylight :: OVSDB :: OpenStack Network Virtual
-| odl-ovsdb-southbound-api | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: api
-| odl-ovsdb-southbound-impl | 1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1 | OpenDaylight :: southbound :: impl
-| odl-ovsdb-southbound-impl-rest|1.1.1-Lithium-SR1 | x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: REST
-| odl-ovsdb-southbound-impl-ui | 1.1.1-Lithium-SR1| x | odl-ovsdb-southbound-1.1.1-Lithium-SR1| OpenDaylight :: southbound :: impl :: UI
-| ``opendaylight-user@opnfv>``
-
-ODL-6: To view the logs, you can use the following commands (or alternately the file data/log/karaf.log).
-
-| ``opendaylight-user@opnfv>log:display``
-| ``opendaylight-user@opnfv>log:tail``
-
-ODL-7: To enable ODL DLUX UI, install the following features. Then you can navigate to
-``http://<opnfv-odl-controller IP address>:8181/index.html`` for DLUX UI.
-The default user-name and password is admin/admin.
-
- ``opendaylight-user@opnfv>feature:install odl-restconf odl-l2switch-switch odl-mdsal-apidocs odl-dlux-core``
-
-ODL-8: To exit out of screen session, please use the command ``CTRL+a`` followed by ``d``
-
-**Note: Do not kill the screen session, it will terminate the ODL controller.**
-
-At this moment, Open Daylight has been started successfully.
-
-**********************************************
-_`Step 3: Start Open Stack on Controller Node`
-**********************************************
-
-OS-N-1: Login to Open Stack Controller Node. For the purpose of example, we use ``opnfv`` as username of login, and
-``opnfv-os-controller`` as hostname of the Open Stack Controller Node.
-
-OS-N-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ``devstack`` directory
-name as an example.
-
- ``cd ~/devstack``
-
-OS-N-3: Create a ``local.conf`` file with the contents from the following URL.
-
- ``http://fpaste.org/276949/39476214/``
-
-Note 1: You need to change the value of ``BRANCH``, and all appearance of ``stable/kilo`` and related URL to point to
-the actual branch of your upstream repository.
-
-Note 2: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address of Open Daylight
-Controller.
-
-Note 3: You may have to change the value of ``ODL_PROVIDER_MAPPINGS`` and ``PUBLIC_INTERFACE`` to match your actual
-network interfaces.
-
-OS-N-4: Initiate Openstack setup by invoking ``stack.sh``
-
- ``./stack.sh``
-
-OS-N-5: If the setup is successful you would see the following logs on the console. Please note that the IP addresses
-are all for the purpose of example. Your IP addresses will match the ones assigned during the installation of OPNFV B
-Release base platform in prior chapters.
-
-| ``This is your host ip: <opnfv-os-controller IP address>``
-| ``Horizon is now available at http://<opnfv-os-controller IP address>/``
-| ``Keystone is serving at <opnfv-os-controller IP address>/``
-| ``The default users are: admin and demo``
-| ``The password: password``
-
-OS-N-6: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf`` to lock the
-codebase. Devstack uses these configuration parameters to determine if it has to run with the existing codebase or
-update to the latest copy.
-
-OS-N-7: Source the credentials.
-
- ``opnfv@opnfv-os-controller:~/devstack$ source openrc admin demo``
-
-OS-N-8: Verify some commands to check if setup is working fine.
-
-| ``opnfv@opnfv-os-controller:~/devstack$ nova flavor-list``
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-| | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-| | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
-| | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
-| | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
-| | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
-| | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-
-Now you can start the Compute node setup.
-
-*******************************************
-_`Step 4: Start Open Stack on Compute Node`
-*******************************************
-
-OS-M-1: Login to Open Stack Compute Node. For the purpose of example, we use ``opnfv`` as username of login, and
-``opnfv-os-compute`` as hostname of the Open Stack Compute Node.
-
-OS-M-2: Start a new terminal, and change directory to where Open Stack is installed. Here we use ``devstack``
-directory name as an example.
-
- ``cd ~/devstack``
-
-OS-M-3: Create a ``local.conf`` file with the contents from the following URL.
-
- ``http://fpaste.org/276958/44395955/``
-
-Note 1: You need to change the value of ``BRANCH``, and all appearance of ``stable/kilo`` and related URL to point to
-the actual branch of your upstream repository.
-
-Note 2: you need to change the IP address of ``SERVICE_HOST`` to point to your actual IP address of Open Stack
-Controller.
-
-Note 3: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address of Open Daylight
-Controller.
-
-Note 4: You may have to change the value of ``ODL_PROVIDER_MAPPINGS`` and ``PUBLIC_INTERFACE`` to match your actual
-network interface.
-
-OS-M-4: Initiate Openstack setup by invoking ``stack.sh``
-
- ``./stack.sh``
-
-OS-M-5: Assuming that all goes well, you can set ``OFFLINE=True`` and ``RECLONE=no`` in ``local.conf`` to lock the
-codebase. Devstack uses these configuration parameters to determine if it has to run with the existing codebase or
-update to the latest copy.
-
-OS-M-6: Source the credentials.
-
- ``opnfv@opnfv-os-compute:~/devstack$ source openrc admin demo``
-
-OS-M-7:Verify some commands to check if setup is working fine.
-
-| ``opnfv@opnfv-os-compute:~/devstack$ nova flavor-list``
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-| | ID | Name | Memory_MB | Disk | Ephemeral | Swap | VCPUs | RXTX_Factor | Is_Public |
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-| | 1 | m1.tiny | 512 | 1 | 0 | | 1 | 1.0 | True |
-| | 2 | m1.small | 2048 | 20 | 0 | | 1 | 1.0 | True |
-| | 3 | m1.medium | 4096 | 40 | 0 | | 2 | 1.0 | True |
-| | 4 | m1.large | 8192 | 80 | 0 | | 4 | 1.0 | True |
-| | 5 | m1.xlarge | 16384 | 160 | 0 | | 8 | 1.0 | True |
-| +----+-----------+-----------+------+-----------+------+-------+-------------+-----------+
-
-Now you can start to set up the service VM as an Ipv6 vRouter in the environment of Open Stack and Open Daylight.
-
-*******************************************************
-_`Step 5: Create External Network Connectivity ext-net`
-*******************************************************
-
-# Place holder for instructions of how to create ext-net
-
-*******************************************************************
-_`Step 6: Create IPv4 Subnet and Router with External Connectivity`
-*******************************************************************
-
-# Place holder for instructions of how to create IPv4 subnet and router associated with ext-net
-
-*******************************************************************
-_`Step 7: Create IPv6 Subnet and Router with External Connectivity`
-*******************************************************************
-
-# Place holder for instructions of how to create IPv6 subnet and router associated with ext-net
-
-*************************************************************
-_`Step 8: Prepare Image, Metadata and Keypair for Service VM`
-*************************************************************
-
-# Place holder for instructions of how to get the image and prepare the metadata for service VM, and how to add keypairs
-
-*****************************************************************
-_`Step 9: Boot Service VM (vRouter) and other VMs in IPv6 Subnet`
-*****************************************************************
-
-# Place holder for instructions of how to boot the service VM named vRouter, and a couple of others in the same Ipv6
-subnet for testing purpose
-
-**********************************
-_`Step 10: Spawn RADVD in vRouter`
-**********************************
-
-# Place holder for instructions of how to spawn the RADVD daemon in vRouter
-
-********************************************
-_`Step 11: Testing to Verify Setup Complete`
-********************************************
-
-# Place holder for instructions of how to test and verify that the setup is complete
-
-*************
-_`Next Steps`
-*************
-
-Congratulations, you have completed the setup of using a service VM to act as an IPv6 vRouter. This setup allows further
-open innovation by any 3rd-party. Please refer to relevant sections in User's Guide for further value-added services on
-this IPv6 vRouter.
-
diff --git a/docs/setupservicevm/scenario-2.rst b/docs/setupservicevm/scenario-2.rst
index 25c9b91..a6913ac 100644
--- a/docs/setupservicevm/scenario-2.rst
+++ b/docs/setupservicevm/scenario-2.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
===============================================================
Scenario 2 - OpenStack + Open Daylight Lithium Official Release
===============================================================
diff --git a/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst b/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
index 5db060c..486795b 100644
--- a/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
+++ b/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
====================
Infrastructure Setup
====================
diff --git a/docs/setupservicevm/scenario-3-1-ipv6-configguide-odl-setup.rst b/docs/setupservicevm/scenario-3-1-ipv6-configguide-odl-setup.rst
index 3a068e0..10bc341 100644
--- a/docs/setupservicevm/scenario-3-1-ipv6-configguide-odl-setup.rst
+++ b/docs/setupservicevm/scenario-3-1-ipv6-configguide-odl-setup.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
========================================
Setting Up Open Daylight Controller Node
========================================
diff --git a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
index 37bbfcb..ef2e746 100644
--- a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
+++ b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
====================================
Setting Up OpenStack Controller Node
====================================
diff --git a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
index 2f875ab..41d9eb2 100644
--- a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
+++ b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
=================================
Setting Up OpenStack Compute Node
=================================
diff --git a/docs/setupservicevm/scenario-3.rst b/docs/setupservicevm/scenario-3.rst
index 7f3ac98..ac1d2fc 100644
--- a/docs/setupservicevm/scenario-3.rst
+++ b/docs/setupservicevm/scenario-3.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
===============================================================
Scenario 3 - OpenStack + Open Daylight Lithium with Patch of Bug Fix
===============================================================
diff --git a/docs/setupservicevm/topology-after-setup.rst b/docs/setupservicevm/topology-after-setup.rst
index 22f1b96..32deb3b 100644
--- a/docs/setupservicevm/topology-after-setup.rst
+++ b/docs/setupservicevm/topology-after-setup.rst
@@ -1,3 +1,7 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
+
============================
Network Topology After Setup
============================