JIRA:IPVSIX-29

Change-Id: Ia9a9eae8987bd4ee84c01b405ccd985e2e4735e2
Signed-off-by: Bin Hu <bh526r@att.com>

5 files changed, 6 insertions, 5 deletions

diff --git a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
index d222c63..24899da 100644
--- a/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
+++ b/docs/setupservicevm/5-ipv6-configguide-scenario-1-native-os.rst
@@ -22,9 +22,9 @@ For exemplary purpose, we assume:
 
    Underlay Network Topology - Scenario 1
 
-**Please note that:**
+**Please NOTE that:**
 
-* **the IP address shown in** :numref:`s1-figure1` **are for exemplary purpose.
+* **The IP address shown in** :numref:`s1-figure1` **are for exemplary purpose.
   You need to configure your public IP address connecting to Internet according
   to your actual network infrastructure. And you need to make sure the private IP address are
   not conflicting with other subnets**.
diff --git a/docs/setupservicevm/index.rst b/docs/setupservicevm/index.rst
index f498138..d60b172 100644
--- a/docs/setupservicevm/index.rst
+++ b/docs/setupservicevm/index.rst
@@ -33,6 +33,7 @@ nodes are used, the setup procedure is the same. In particular:
   ``ipv6-router`` is created in order to manually spawn ``radvd`` daemon inside the
   ``ipv6-router`` namespace in steps **SETUP-SVM-24** through **SETUP-SVM-30**.
 
+
 .. toctree::
    :numbered:
    :maxdepth: 4
diff --git a/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst b/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
index a407c27..5db060c 100644
--- a/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
+++ b/docs/setupservicevm/scenario-3-0-ipv6-configguide-prep-infra.rst
@@ -7,7 +7,7 @@ each of which has minimum 8GB RAM and 40GB storage. One host is used as OpenStac
 Node. The second host is used as Open Daylight Controller Node. And the third one is used as
 OpenStack Compute Node.
 
-** Please NOTE that Although the deployment model of single controller node is assumed, in case of HA
+**Please NOTE that Although the deployment model of single controller node is assumed, in case of HA
 (High Availability) deployment model where multiple controller nodes are used, there is no impact and the
 setup procedure is the same.**
 
diff --git a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
index 60af9f4..d1af395 100644
--- a/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
+++ b/docs/setupservicevm/scenario-3-2-ipv6-configguide-os-controller.rst
@@ -59,7 +59,7 @@ For **Fedora**:
 Please **note** that:
 
 * Note 1: Because Scenario 3 and Scenario 2 are essentially the same, and their only difference
-  is using different build of Open Daylight, they share the same ``local.conf``` file of OpenStack.
+  is using different build of Open Daylight, they share the same ``local.conf`` file of OpenStack.
 * Note 2: You need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address
   of Open Daylight Controller.
 
diff --git a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
index 88a66cd..34af6b2 100644
--- a/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
+++ b/docs/setupservicevm/scenario-3-3-ipv6-configguide-os-compute.rst
@@ -59,7 +59,7 @@ For **Fedora**:
 Please Note:
 
 * Note 1: Because Scenario 3 and Scenario 2 are essentially the same, and their only difference
-  is using different build of Open Daylight, they share the same ``local.conf``` file of OpenStack.
+  is using different build of Open Daylight, they share the same ``local.conf`` file of OpenStack.
 * Note 2: you need to change the IP address of ``SERVICE_HOST`` to point to your actual IP address
   of OpenStack Controller.
 * Note 3: you need to change the IP address of ``ODL_MGR_IP`` to point to your actual IP address