diff options
Diffstat (limited to 'fuel/docs/src/tmp/INSTALL/README')
| -rw-r--r-- | fuel/docs/src/tmp/INSTALL/README | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/fuel/docs/src/tmp/INSTALL/README b/fuel/docs/src/tmp/INSTALL/README new file mode 100644 index 0000000..456e26d --- /dev/null +++ b/fuel/docs/src/tmp/INSTALL/README @@ -0,0 +1,154 @@ +############################################################################## +# Copyright (c) 2015 Ericsson AB and others. +# stefan.k.berg@ericsson.com +# jonas.bjurel@ericsson.com +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## + + +This README file describes how to install the OPNFV BGS Stack +============================================================= +1.1 Install Fuel Server +----------------------- +1. Mount the built .iso file (release/opnfv-<version>.iso) as a bootdevice to the fuel server. + +2. Reboot the fuel server. + The system now boots from the ISO image. + +3. Change the grub boot params + When Press Tab to edit . is shown press Tab. + Change showmenu=no to showmenu=yes. + Change netmask=255.255.255.0 to netmask=255.255.0.0. + Press Enter. + +4 Wait until screen Fuel setup . is shown. + Note: This takes about 30 minutes. + +5. Select PXE Setup and change the following fields to appropriate values (example below): + Static Pool Start 10.20.0.3 + Static Pool End 10.20.0.254 + DHCP Pool Start 10.20.128.3 + DHCP Pool End 10.20.128.254 + +6. Select DNS & Hostname and change the following fields to appropriate values: + Hostname <CEE Region name>-fuel + Domain <Domain Name> + Search Domain <Search Domain Name> + Hostname to test DNS <Hostname to test DNS> + +7. Select Time Sync and change the following fields to appropriate values: + NTP Server 1 <Customer NTP server 1> + NTP Server 2 <Customer NTP server 2> + NTP Server 3<Customer NTP server 3> + Note: This step is only to pass the network test, the actual ntp parameters will be set with the pre_deply script. + +8. Start the installation. + Select Quit Setup and press Save and Quit. + Installation starts, wait until a screen with logon credentials is shown. + Note: This takes about 15 minutes. + +10. Enable PXE Booting and put it first in the bios boot order menu. + +11. Reboot the controller- and compute blades. + +12. Connect to Fuel wit a browser towards port 8000 + +13. Create and name a new OpenStack environment, to be installed. + +14. Select Icehouse on Ubuntu . in field OpenStack Release. + +15. Select deployment mode. + Select the Multi-node with HA. + +16. Select compute node mode. + Select KVM as hypervisor. + +17. Select network mode. + Select Neutron with VLAN segmentation. + +18. Select Storage Backends. + Select Ceph for Cinder and default for glance. + + +19. Select additional services. + Check option Install Celiometer (OpenStack Telemetry). + +20. Create the new environment. + +21. Wait for availability nodes. + Wait until all nodes are displayed in top right in <total number of server> TOTAL NODES and <total number of servers> UNALLOCATED NODES. + +22. Open the created environment. + +23. Open the networks tab. + +24. Update the public configuration. + Change the following fields to appropriate values: + IP Range Start to <Public IP Address start> + IP Range End to <Public IP Address end> + CIDR to <CIDR for Public IP Addresses> + Gateway to <Gateway for Public IP Addresses> + Check VLAN tagging. + Set appropriate VLAN id. + +25. Update the management configuration. + Set CIDR to 172.16.255.128/25. + Check VLAN tagging. + Set appropriate VLAN id. + +26. Update the storage configuration. + Set CIDR to the appropriate value + Check VLAN tagging. + Set appropriate VLAN id. + +27. Update the Neutron L2 configuration. + Set VLAN ID range. + +28. Update the Neutron L3 configuration. + Set Internal network CIDR to an appropriate value + Set Internal network gateway to an appropriate value + Set Floating IP ranges. + Set DNS Servers + +29. Save Settings. + +30. Click "verify network" to check the network set-up + +31. Update storage configuration. + +32. Open the nodes tab. + +33. Assign roles. + Check Controller and Telemetry . MongoDB. + Check three nodes to be installed as Controller in pane Assign Role. + Click Apply Changes. + Check Compute. + Check nodes to be installed as Compute nodes in pane Assign Role. + Click Apply Changes. + +34. Configure interfaces. + Check Select All to select all nodes with Control, Telemetry . MongoDB and Compute node roles. + Click Configure Interfaces. + Screen Configure interfaces on number of <number of nodes> nodes is shown. + Assign interfaces (bonded) for mgmt-, admin-, private-, public- and storage networks + +35. Run the pre-deploy script. + Log on as root to the Fuel node. + Print Fuel environment Id (fuel env) + #> id | status | name | mode | release_id | changes <id>| new | <CEE Region name>| ha_compact | 2 | <ite specific information> + +36. Run the pre-deployment script (/opt/opnfv/pre-deploy.sh <id>) + As prompted for-, set the DNS servers to go into /etc/resolv.conf. + As prompted for-, set any Hosts file additions for controllers and compute nodes. You will be prompted for name, FQDN and IP for each entry. Press return when prompted for a name when you have completed your input. + As prompted for-, set NTP upstream configuration for controllers. You will be prompted for a NTP server each entry. Press return when prompted for a NTP server when you have completed your input. + +37. Deploy the environment. + In the Fuel GUI, click Deploy Changes. + +38 Verify the OpenStack Environment + Open the Health Check tab . + Select Select All. + Click Run tests. |