diff options
Diffstat (limited to 'fuel/build')
-rw-r--r-- | fuel/build/DOC/BUILD/README.architecture | 10 | ||||
-rw-r--r-- | fuel/build/DOC/BUILD/README.build | 98 | ||||
-rw-r--r-- | fuel/build/DOC/BUILD/README.examples | 10 | ||||
-rw-r--r-- | fuel/build/DOC/INSTALL/README | 154 | ||||
-rw-r--r-- | fuel/build/RELEASENOTES | 32 | ||||
-rw-r--r-- | fuel/build/TODO | 10 |
6 files changed, 0 insertions, 314 deletions
diff --git a/fuel/build/DOC/BUILD/README.architecture b/fuel/build/DOC/BUILD/README.architecture deleted file mode 100644 index 4629763..0000000 --- a/fuel/build/DOC/BUILD/README.architecture +++ /dev/null @@ -1,10 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - diff --git a/fuel/build/DOC/BUILD/README.build b/fuel/build/DOC/BUILD/README.build deleted file mode 100644 index b8ce799..0000000 --- a/fuel/build/DOC/BUILD/README.build +++ /dev/null @@ -1,98 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -How to setup and use the OPNFV/BGS/FUEL build system -==================================================== - -1. Build system requirements ----------------------------- -1.1 Host HW/VM requirements ---------------------------- -- An x86_64 host (real iron or VM) with Ubuntu 14.04 LTS installed -- ~30 GB available disc -- 4 GB RAM - -1.2 Host SW dependencies ------------------------- -The host should run Ubuntu 14.04 -On the host, the following packages must be installed: -- docker - see https://docs.docker.com/installation/ubuntulinux/ for installation notes -for Ubuntu 14.04. Note: only use the Ubuntu stock distro of Docker (docker.io) -- git (simply available through apt-get install git) -- make (simply available through apt-get install make) -- curl - -2 Setting up the Docker build container ----------------------------------------- -When having installed Docker, add yourself to the docker group: -usermod -a -G docker <userid> - -Also make sure to define rellevant dns servers part of the global dns chain in -in your /etc/default/docker config file, eg. -DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4" - -Then restart docker with "service docker.io restart".: - -3. Setting up OPNFV Gerrit in order to being able to clone the code -------------------------------------------------------------------- -- Start by creating a SSH key, if you don't already have one, create one with ssh-keygen - -- Add your generated public key in OPNFV Gerrit -https://gerrit.opnfv.org/ - (this requires a linuxfoundation account, create one if you do not already have one) - -- Select "SSH Public Keys" to the left and then "Add Key" and paste your public key in. - -4. Clone the OPNFV code git repository --------------------------------------- - So now we're coming to the fun part! Let's clone the code repository: - git clone ssh://<Linux foundation user>@gerrit.opnfv.org:29418/genesis - - Change the directory to "fuel-build" - cd fuel-build/ - -5. Set up (build) your build environment ----------------------------------------- -Select the versions of the components you want to build by editing the -fuel-build/config-spec file. Note if you want to build with OpenDaylight -SDN controller you need to uncomment the lines starting with odl-main and -java-main - -6. Build your fuel .iso image ------------------------------ -That's it, time to build! -make [all] - -This will: -- If not allready existing, initialize the docker build environment -- If not already done, build OpenDaylight from upstream (as defined by fuel-build/ - config-spec) -- If not already done, build fuel from upstream (as defined by fuel-build/config-spec) -- Build the defined additions to fuel (as defined by the structure of this framework) -- Apply changes and patches to fuel (as defined by the structure of this framework) -- Reconstruct a fuel .iso image - -If the build is successful, you will find the generated ISO file in the release -subdirectory! - -NOTE: the build of the baseline for Fuel and odl are cached, if build results reffering -to the same versions as specified in fuel-build/config spec has been built before, these -packages will not be rebuilt. The cache is cleared by "make clean" - -7. Install your stack ---------------------- -Please see DOC/INSTALL/README - -NOTES and TODO: ---------------- -The build system will for now partly run as sudo -BUT NOTE, NONE OF THE MAKEFILES OR SCRIPTS SHALL BE EXECUTED WITH -SUDO/ROOT PRIVILEDGES! -TODO: Change the scripts so that no root priviledges will be needed - diff --git a/fuel/build/DOC/BUILD/README.examples b/fuel/build/DOC/BUILD/README.examples deleted file mode 100644 index 4629763..0000000 --- a/fuel/build/DOC/BUILD/README.examples +++ /dev/null @@ -1,10 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - diff --git a/fuel/build/DOC/INSTALL/README b/fuel/build/DOC/INSTALL/README deleted file mode 100644 index 456e26d..0000000 --- a/fuel/build/DOC/INSTALL/README +++ /dev/null @@ -1,154 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - - -This README file describes how to install the OPNFV BGS Stack -============================================================= -1.1 Install Fuel Server ------------------------ -1. Mount the built .iso file (release/opnfv-<version>.iso) as a bootdevice to the fuel server. - -2. Reboot the fuel server. - The system now boots from the ISO image. - -3. Change the grub boot params - When Press Tab to edit . is shown press Tab. - Change showmenu=no to showmenu=yes. - Change netmask=255.255.255.0 to netmask=255.255.0.0. - Press Enter. - -4 Wait until screen Fuel setup . is shown. - Note: This takes about 30 minutes. - -5. Select PXE Setup and change the following fields to appropriate values (example below): - Static Pool Start 10.20.0.3 - Static Pool End 10.20.0.254 - DHCP Pool Start 10.20.128.3 - DHCP Pool End 10.20.128.254 - -6. Select DNS & Hostname and change the following fields to appropriate values: - Hostname <CEE Region name>-fuel - Domain <Domain Name> - Search Domain <Search Domain Name> - Hostname to test DNS <Hostname to test DNS> - -7. Select Time Sync and change the following fields to appropriate values: - NTP Server 1 <Customer NTP server 1> - NTP Server 2 <Customer NTP server 2> - NTP Server 3<Customer NTP server 3> - Note: This step is only to pass the network test, the actual ntp parameters will be set with the pre_deply script. - -8. Start the installation. - Select Quit Setup and press Save and Quit. - Installation starts, wait until a screen with logon credentials is shown. - Note: This takes about 15 minutes. - -10. Enable PXE Booting and put it first in the bios boot order menu. - -11. Reboot the controller- and compute blades. - -12. Connect to Fuel wit a browser towards port 8000 - -13. Create and name a new OpenStack environment, to be installed. - -14. Select Icehouse on Ubuntu . in field OpenStack Release. - -15. Select deployment mode. - Select the Multi-node with HA. - -16. Select compute node mode. - Select KVM as hypervisor. - -17. Select network mode. - Select Neutron with VLAN segmentation. - -18. Select Storage Backends. - Select Ceph for Cinder and default for glance. - - -19. Select additional services. - Check option Install Celiometer (OpenStack Telemetry). - -20. Create the new environment. - -21. Wait for availability nodes. - Wait until all nodes are displayed in top right in <total number of server> TOTAL NODES and <total number of servers> UNALLOCATED NODES. - -22. Open the created environment. - -23. Open the networks tab. - -24. Update the public configuration. - Change the following fields to appropriate values: - IP Range Start to <Public IP Address start> - IP Range End to <Public IP Address end> - CIDR to <CIDR for Public IP Addresses> - Gateway to <Gateway for Public IP Addresses> - Check VLAN tagging. - Set appropriate VLAN id. - -25. Update the management configuration. - Set CIDR to 172.16.255.128/25. - Check VLAN tagging. - Set appropriate VLAN id. - -26. Update the storage configuration. - Set CIDR to the appropriate value - Check VLAN tagging. - Set appropriate VLAN id. - -27. Update the Neutron L2 configuration. - Set VLAN ID range. - -28. Update the Neutron L3 configuration. - Set Internal network CIDR to an appropriate value - Set Internal network gateway to an appropriate value - Set Floating IP ranges. - Set DNS Servers - -29. Save Settings. - -30. Click "verify network" to check the network set-up - -31. Update storage configuration. - -32. Open the nodes tab. - -33. Assign roles. - Check Controller and Telemetry . MongoDB. - Check three nodes to be installed as Controller in pane Assign Role. - Click Apply Changes. - Check Compute. - Check nodes to be installed as Compute nodes in pane Assign Role. - Click Apply Changes. - -34. Configure interfaces. - Check Select All to select all nodes with Control, Telemetry . MongoDB and Compute node roles. - Click Configure Interfaces. - Screen Configure interfaces on number of <number of nodes> nodes is shown. - Assign interfaces (bonded) for mgmt-, admin-, private-, public- and storage networks - -35. Run the pre-deploy script. - Log on as root to the Fuel node. - Print Fuel environment Id (fuel env) - #> id | status | name | mode | release_id | changes <id>| new | <CEE Region name>| ha_compact | 2 | <ite specific information> - -36. Run the pre-deployment script (/opt/opnfv/pre-deploy.sh <id>) - As prompted for-, set the DNS servers to go into /etc/resolv.conf. - As prompted for-, set any Hosts file additions for controllers and compute nodes. You will be prompted for name, FQDN and IP for each entry. Press return when prompted for a name when you have completed your input. - As prompted for-, set NTP upstream configuration for controllers. You will be prompted for a NTP server each entry. Press return when prompted for a NTP server when you have completed your input. - -37. Deploy the environment. - In the Fuel GUI, click Deploy Changes. - -38 Verify the OpenStack Environment - Open the Health Check tab . - Select Select All. - Click Run tests. diff --git a/fuel/build/RELEASENOTES b/fuel/build/RELEASENOTES deleted file mode 100644 index 76b4208..0000000 --- a/fuel/build/RELEASENOTES +++ /dev/null @@ -1,32 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -This patch introduces the following features and bug fixes: ------------------------------------------------------------ -1) The OpenDaylight SDN server - unplumbed (config.mk needs to be changed - in order to enable it, see: fuel-build/DOC/BUILD/README.build) -2) cofig-spec - a way to configure the stack component versions - to be built - see the fuel-build/config.mk file -3) A simplified Docker build startegy, pulling a pre-fabricated - docker base image from the Internet - -NOTE: Before you start building - you need to purge any previous -"opnfv.org/ubuntu-builder" docker image: "sudo docker rmi -f opnfv.org/ubuntu-builder -Double check that you dont have any remaining "opnfv.org/ubuntu-builder" images by -"docker images". -A new docker image will automatically be rebuilt in the build process. - -Limitations and known issues: ------------------------------ -1) OpenDaylight is for now just sitting in the controllers, not plumbed to anything - northbound or southbound. -2) OpenDaylight is currently only building with Oracle Java JDK, that is Oracle Java - is used in the build process while OpenJava is used in the runtime environment. - Read the licencing obligations in /fuel-build/LICENCE before you start building. diff --git a/fuel/build/TODO b/fuel/build/TODO deleted file mode 100644 index 897a7e8..0000000 --- a/fuel/build/TODO +++ /dev/null @@ -1,10 +0,0 @@ -############################################ -# Contributors/version/date -# jonas.bjurel@ericsson.com 0.1 2015.01.28 -############################################ -Following items needs to be done to achieve an OPNFV/BGS R1 Stack: -1) Rebase to Fuel 6.0/6.1 - DONE -2) Add support for CentOS 6.5 - REMAINING -3) Add build-support and manifests for Open daylight Ubuntu and CentOS - - Initial build and deployment of ODL/Helium - DONE - - Configuration and plumbing - IN PROGRESS
\ No newline at end of file |