summaryrefslogtreecommitdiffstats
path: root/fuel/build/f_isoroot
diff options
context:
space:
mode:
Diffstat (limited to 'fuel/build/f_isoroot')
-rw-r--r--fuel/build/f_isoroot/Makefile2
-rwxr-xr-xfuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh107
-rwxr-xr-xfuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig108
-rw-r--r--[-rwxr-xr-x]fuel/build/f_isoroot/f_kscfg/ks.cfg122
-rw-r--r--fuel/build/f_isoroot/f_kscfg/ks.cfg.orig120
-rw-r--r--fuel/build/f_isoroot/f_predeployment/Makefile28
-rw-r--r--fuel/build/f_isoroot/f_predeployment/README18
-rwxr-xr-xfuel/build/f_isoroot/f_predeployment/pre-deploy.sh401
-rwxr-xr-xfuel/build/f_isoroot/f_predeployment/sysinfo.sh12
-rwxr-xr-xfuel/build/f_isoroot/f_predeployment/transform_yaml.py68
10 files changed, 321 insertions, 665 deletions
diff --git a/fuel/build/f_isoroot/Makefile b/fuel/build/f_isoroot/Makefile
index bde8e64..8a7f48a 100644
--- a/fuel/build/f_isoroot/Makefile
+++ b/fuel/build/f_isoroot/Makefile
@@ -8,7 +8,7 @@
# http://www.apache.org/licenses/LICENSE-2.0
##############################################################################
-SUBDIRS = f_predeployment f_kscfg f_bootstrap
+SUBDIRS = f_kscfg f_bootstrap
SUBCLEAN = $(addsuffix .clean,$(SUBDIRS))
.PHONY: all
diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
index 348ce3c..8bdf566 100755
--- a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
+++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
@@ -1,4 +1,5 @@
#!/bin/bash
+FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ')
function countdown() {
local i
@@ -47,9 +48,6 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
{ kill "$pid"; wait $!; } 2>/dev/null
case "$key" in
$'\e') echo "Skipping Fuel Setup.."
- echo -n "Applying default Fuel setings..."
- fuelmenu --save-only --iface=eth0
- echo "Done!"
;;
*) echo -e "\nEntering Fuel Setup..."
fuelmenu
@@ -57,30 +55,51 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
esac
fi
fi
+
+
#Reread /etc/sysconfig/network to inform puppet of changes
. /etc/sysconfig/network
hostname "$HOSTNAME"
-### docker stuff
-images_dir="/var/www/nailgun/docker/images"
+service docker start
-# extract docker images
-mkdir -p $images_dir $sources_dir
-rm -f $images_dir/*tar
-pushd $images_dir &>/dev/null
+if [ -f /root/.build_images ]; then
+ #Fail on all errors
+ set -e
+ trap fail EXIT
-echo "Extracting and loading docker images. (This may take a while)"
-lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar
-popd &>/dev/null
-service docker start
+ echo "Loading Fuel base image for Docker..."
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
-# load docker images
-for image in $images_dir/*tar ; do
- echo "Loading docker image ${image}..."
- docker load -i "$image"
- # clean up extracted image
- rm -f "$image"
-done
+ echo "Building Fuel Docker images..."
+ WORKDIR=$(mktemp -d /tmp/docker-buildXXX)
+ SOURCE=/var/www/nailgun/docker
+ REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND')
+ RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2)
+
+ for imagesource in /var/www/nailgun/docker/sources/*; do
+ if ! [ -f "$imagesource/Dockerfile" ]; then
+ echo "Skipping ${imagesource}..."
+ continue
+ fi
+ image=$(basename "$imagesource")
+ cp -R "$imagesource" $WORKDIR/$image
+ mkdir -p $WORKDIR/$image/etc
+ cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc
+ sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile
+ sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml
+ docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image
+ done
+ docker rm -f $REPO_CONT_ID
+ rm -rf "$WORKDIR"
+
+ #Remove trap for normal deployment
+ trap - EXIT
+ set +e
+else
+ echo "Loading docker images. (This may take a while)"
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+fi
# apply puppet
puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
@@ -102,4 +121,52 @@ done
shopt -u nullglob
### OPNFV addition END
+# Enable updates repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF
+[mos${FUEL_RELEASE}-updates]
+name=mos${FUEL_RELEASE}-updates
+baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/updates/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+# Enable security repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF
+[mos${FUEL_RELEASE}-security]
+name=mos${FUEL_RELEASE}-security
+baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/security/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+#Check if repo is accessible
+echo "Checking for access to updates repository..."
+repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1)
+if urlaccesscheck check "$repourl" ; then
+ UPDATE_ISSUES=0
+else
+ UPDATE_ISSUES=1
+fi
+
+if [ $UPDATE_ISSUES -eq 1 ]; then
+ warning="WARNING: There are issues connecting to Fuel update repository.\
+\nPlease fix your connection and update this node with \`yum update\`\
+\nThen run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\
+\nto repeat bootstrap on Fuel Master with the latest updates.\
+\nFor more information, check out Fuel documentation at:\
+\nhttp://docs.mirantis.com/fuel"
+else
+ warning="WARNING: There may be updates available for Fuel.\
+\nYou should update this node with \`yum update\`. If there are available\
+\n updates, run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\
+\nto repeat bootstrap on Fuel Master with the latest updates.\
+\nFor more information, check out Fuel documentation at:\
+\nhttp://docs.mirantis.com/fuel"
+fi
+echo
+echo "*************************************************"
+echo -e "$warning"
+echo "*************************************************"
+echo "Sending notification to Fuel UI..."
+fuel notify --topic warning --send "$warning"
echo "Fuel node deployment complete!"
diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
index 7b6e6bd..8d21c1e 100755
--- a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
+++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
@@ -1,4 +1,5 @@
#!/bin/bash
+FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ')
function countdown() {
local i
@@ -37,9 +38,6 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
{ kill "$pid"; wait $!; } 2>/dev/null
case "$key" in
$'\e') echo "Skipping Fuel Setup.."
- echo -n "Applying default Fuel setings..."
- fuelmenu --save-only --iface=eth0
- echo "Done!"
;;
*) echo -e "\nEntering Fuel Setup..."
fuelmenu
@@ -47,30 +45,51 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
esac
fi
fi
+
+
#Reread /etc/sysconfig/network to inform puppet of changes
. /etc/sysconfig/network
hostname "$HOSTNAME"
-### docker stuff
-images_dir="/var/www/nailgun/docker/images"
+service docker start
-# extract docker images
-mkdir -p $images_dir $sources_dir
-rm -f $images_dir/*tar
-pushd $images_dir &>/dev/null
+if [ -f /root/.build_images ]; then
+ #Fail on all errors
+ set -e
+ trap fail EXIT
-echo "Extracting and loading docker images. (This may take a while)"
-lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar
-popd &>/dev/null
-service docker start
+ echo "Loading Fuel base image for Docker..."
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+
+ echo "Building Fuel Docker images..."
+ WORKDIR=$(mktemp -d /tmp/docker-buildXXX)
+ SOURCE=/var/www/nailgun/docker
+ REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND')
+ RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2)
+
+ for imagesource in /var/www/nailgun/docker/sources/*; do
+ if ! [ -f "$imagesource/Dockerfile" ]; then
+ echo "Skipping ${imagesource}..."
+ continue
+ fi
+ image=$(basename "$imagesource")
+ cp -R "$imagesource" $WORKDIR/$image
+ mkdir -p $WORKDIR/$image/etc
+ cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc
+ sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile
+ sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml
+ docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image
+ done
+ docker rm -f $REPO_CONT_ID
+ rm -rf "$WORKDIR"
-# load docker images
-for image in $images_dir/*tar ; do
- echo "Loading docker image ${image}..."
- docker load -i "$image"
- # clean up extracted image
- rm -f "$image"
-done
+ #Remove trap for normal deployment
+ trap - EXIT
+ set +e
+else
+ echo "Loading docker images. (This may take a while)"
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+fi
# apply puppet
puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
@@ -81,4 +100,53 @@ rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote
dockerctl check || fail
bash /etc/rc.local
+
+# Enable updates repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF
+[mos${FUEL_RELEASE}-updates]
+name=mos${FUEL_RELEASE}-updates
+baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/updates/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+# Enable security repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF
+[mos${FUEL_RELEASE}-security]
+name=mos${FUEL_RELEASE}-security
+baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/security/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+#Check if repo is accessible
+echo "Checking for access to updates repository..."
+repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1)
+if urlaccesscheck check "$repourl" ; then
+ UPDATE_ISSUES=0
+else
+ UPDATE_ISSUES=1
+fi
+
+if [ $UPDATE_ISSUES -eq 1 ]; then
+ warning="WARNING: There are issues connecting to Fuel update repository.\
+\nPlease fix your connection and update this node with \`yum update\`\
+\nThen run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\
+\nto repeat bootstrap on Fuel Master with the latest updates.\
+\nFor more information, check out Fuel documentation at:\
+\nhttp://docs.mirantis.com/fuel"
+else
+ warning="WARNING: There may be updates available for Fuel.\
+\nYou should update this node with \`yum update\`. If there are available\
+\n updates, run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\
+\nto repeat bootstrap on Fuel Master with the latest updates.\
+\nFor more information, check out Fuel documentation at:\
+\nhttp://docs.mirantis.com/fuel"
+fi
+echo
+echo "*************************************************"
+echo -e "$warning"
+echo "*************************************************"
+echo "Sending notification to Fuel UI..."
+fuel notify --topic warning --send "$warning"
echo "Fuel node deployment complete!"
diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg b/fuel/build/f_isoroot/f_kscfg/ks.cfg
index 508f044..12cd1ab 100755..100644
--- a/fuel/build/f_isoroot/f_kscfg/ks.cfg
+++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg
@@ -26,10 +26,12 @@ skipx
drives=""
removable_drives=""
for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
- if (grep -q 0 /sys/block/${drv}/removable); then
- drives="${drives} ${drv}"
- else
- removable_drives="${removable_drives} ${drv}"
+ if !(blkid | grep -q "${drv}.*Fuel"); then
+ if (grep -q 0 /sys/block/${drv}/removable); then
+ drives="${drives} ${drv}"
+ else
+ removable_drives="${removable_drives} ${drv}"
+ fi
fi
done
default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
@@ -152,9 +154,9 @@ if [ "$format_confirmed" != "yes" ] ; then
chvt 1
fi
-# verify tgtdrive is at least 30GB
+# verify tgtdrive is at least 41GB
tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
-if [ $tgtdrivesize -lt 30720 ]; then
+if [ $tgtdrivesize -lt 41984 ]; then
exec < /dev/tty3 > /dev/tty3 2>&1
chvt 3
clear
@@ -162,7 +164,7 @@ if [ $tgtdrivesize -lt 30720 ]; then
echo '********************************************************************'
echo '* E R R O R *'
echo '* *'
- echo '* Your disk is under 30GB in size. Installation cannot continue. *'
+ echo '* Your disk is under 41GB in size. Installation cannot continue. *'
echo '* Restart installation with a larger disk. *'
echo '* *'
echo '********************************************************************'
@@ -175,7 +177,9 @@ fi
tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
# source
-if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
else
echo "cdrom" > /tmp/source.ks
@@ -204,16 +208,18 @@ else
fi
echo > /tmp/partition.ks
echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
-echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks
+echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks
echo "volgroup os pv.001" >> /tmp/partition.ks
echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
-echo "logvol /var --vgname=os --size=10000 --percent 60 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
-echo "logvol /var/log --vgname=os --size=4096 --percent 40 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
# bootloader
-echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
# Anaconda can not install grub 0.97 on disks which are >4T.
# The reason is that grub does not support such large geometries
@@ -233,6 +239,9 @@ echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch
%packages --nobase --excludedocs
@Core
+fuel
+fuel-library
+fuel-dockerctl
authconfig
bind-utils
cronie
@@ -241,7 +250,12 @@ curl
daemonize
dhcp
docker-io
+fuel-bootstrap-image
+fuel-createmirror
+fuel-target-centos-images
+fuel-package-updates
fuelmenu
+fuel-docker-images
gdisk
lrzip
lsof
@@ -249,8 +263,10 @@ man
mlocate
nmap-ncat
ntp
+ntpdate
openssh-clients
policycoreutils
+python-daemon
rsync
ruby21-puppet
ruby21-rubygem-netaddr
@@ -266,6 +282,7 @@ vim-enhanced
virt-what
wget
yum
+yum-plugin-priorities
%include /tmp/post_partition.ks
@@ -285,6 +302,8 @@ echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.c
%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
#!/bin/sh
+set -x
+
SOURCE="/mnt/sysimage/tmp/source"
for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
@@ -342,6 +361,7 @@ function save_cfg {
else
echo GATEWAY=$gw >> /etc/sysconfig/network
fi
+ [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images
}
# Default FQDN
@@ -356,6 +376,7 @@ gw=$gw
device="eth0"
hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
dhcp_interface=$dhcp_interface
+build_images=$build_images
save_cfg
# Mounting installation source
@@ -366,7 +387,9 @@ echo
mkdir -p ${SOURCE}
mkdir -p ${FS}
-if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE}
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
mount -o loop ${FS}/nailgun.iso ${SOURCE}
fi
@@ -390,61 +413,47 @@ cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
# Copying Ubuntu files
mkdir -p ${repodir}/ubuntu/x86_64/images
-cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64
cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64
cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images
-cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images
+
+# We do not ship debian-installer kernel and initrd on ISO.
+# But we still need to be able to create ubuntu cobbler distro
+# which requires kernel and initrd to be available. So, we
+# just touch these files to work around cobbler's limitation.
+touch ${repodir}/ubuntu/x86_64/images/linux
+touch ${repodir}/ubuntu/x86_64/images/initrd.gz
# make links for backward compatibility
ln -s ${repodir}/centos ${wwwdir}/centos
ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
-# Copying bootstrap image
-mkdir -p ${wwwdir}/bootstrap
-cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap
-cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap
-
-# Copying target images
-cp -r ${SOURCE}/targetimages ${wwwdir}
-
-mkdir -p /root/.ssh
-chmod 700 /root/.ssh
-cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh
-chmod 600 /root/.ssh/bootstrap.rsa
-
# --------------------------
# UNPACKING PUPPET MANIFESTS
# --------------------------
# create folders
-mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
-mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
-rm -rf /etc/puppet/modules/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+#rm -rf /etc/puppet/modules/
# TODO(ikalnitsky): investigate why we need this
-cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
# place modules and manifests
-tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
-cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
# make links for backward compatibility
-pushd /etc/puppet
-ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
-ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
-popd
+#pushd /etc/puppet
+#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+#popd
cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
mkdir -p /var/lib/hiera
touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
-# Deploy docker images and ctl tools if we built ISO with docker containers support
-[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker
-
# Prepare local repository specification
rm /etc/yum.repos.d/CentOS*.repo
cat > /etc/yum.repos.d/nailgun.repo << EOF
@@ -461,6 +470,24 @@ sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf
# Disable GSSAPI in ssh server config
sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+# Enable MOTD banner in sshd
+sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config
+
+# Add note regarding local repos creation to MOTD
+cat >> /etc/motd << EOF
+
+All environments use online repositories by default.
+Use the following commands to create local repositories
+on master node and change default repository settings:
+
+* CentOS: fuel-package-updates (see --help for options)
+* Ubuntu: fuel-createmirror (see --help for options)
+
+Please refer to the following guide for more information:
+https://docs.mirantis.com/openstack/fuel/fuel-6.1/reference-architecture.html#fuel-rep-mirror
+
+EOF
+
# Copying bootstrap_admin_node.sh, chmod it and
# adding /etc/init/bootstrap_admin_node.conf
cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
@@ -546,10 +573,7 @@ rm -rf ${SOURCE}
umount -f ${FS} || true
rm -rf ${FS}
-# Enabling/configuring NTPD and ntpdate services
-echo "server 127.127.1.0" >> /etc/ntp.conf
-echo "fudge 127.127.1.0 stratum 10" >> /etc/ntp.conf
-echo "tos orphan 7" >> /etc/ntp.conf
+echo "tos orphan 7" >> /etc/ntp.conf
# Do not show error message on ntpdate failure. Customers should not be confused
# if admin node does not have access to the internet time servers.
@@ -571,4 +595,4 @@ cp -f /etc/skel/.bash* /root/
# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors
[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf
-%end
+%end \ No newline at end of file
diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig
index bddf99c..cf8cf80 100644
--- a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig
+++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig
@@ -26,10 +26,12 @@ skipx
drives=""
removable_drives=""
for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
- if (grep -q 0 /sys/block/${drv}/removable); then
- drives="${drives} ${drv}"
- else
- removable_drives="${removable_drives} ${drv}"
+ if !(blkid | grep -q "${drv}.*Fuel"); then
+ if (grep -q 0 /sys/block/${drv}/removable); then
+ drives="${drives} ${drv}"
+ else
+ removable_drives="${removable_drives} ${drv}"
+ fi
fi
done
default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
@@ -152,9 +154,9 @@ if [ "$format_confirmed" != "yes" ] ; then
chvt 1
fi
-# verify tgtdrive is at least 30GB
+# verify tgtdrive is at least 41GB
tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
-if [ $tgtdrivesize -lt 30720 ]; then
+if [ $tgtdrivesize -lt 41984 ]; then
exec < /dev/tty3 > /dev/tty3 2>&1
chvt 3
clear
@@ -162,7 +164,7 @@ if [ $tgtdrivesize -lt 30720 ]; then
echo '********************************************************************'
echo '* E R R O R *'
echo '* *'
- echo '* Your disk is under 30GB in size. Installation cannot continue. *'
+ echo '* Your disk is under 41GB in size. Installation cannot continue. *'
echo '* Restart installation with a larger disk. *'
echo '* *'
echo '********************************************************************'
@@ -175,7 +177,9 @@ fi
tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
# source
-if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
else
echo "cdrom" > /tmp/source.ks
@@ -204,16 +208,18 @@ else
fi
echo > /tmp/partition.ks
echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
-echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks
+echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks
echo "volgroup os pv.001" >> /tmp/partition.ks
echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
-echo "logvol /var --vgname=os --size=10000 --percent 60 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
-echo "logvol /var/log --vgname=os --size=4096 --percent 40 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
# bootloader
-echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
# Anaconda can not install grub 0.97 on disks which are >4T.
# The reason is that grub does not support such large geometries
@@ -233,6 +239,9 @@ echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch
%packages --nobase --excludedocs
@Core
+fuel
+fuel-library
+fuel-dockerctl
authconfig
bind-utils
cronie
@@ -241,7 +250,12 @@ curl
daemonize
dhcp
docker-io
+fuel-bootstrap-image
+fuel-createmirror
+fuel-target-centos-images
+fuel-package-updates
fuelmenu
+fuel-docker-images
gdisk
lrzip
lsof
@@ -249,8 +263,10 @@ man
mlocate
nmap-ncat
ntp
+ntpdate
openssh-clients
policycoreutils
+python-daemon
rsync
ruby21-puppet
ruby21-rubygem-netaddr
@@ -266,6 +282,7 @@ vim-enhanced
virt-what
wget
yum
+yum-plugin-priorities
%include /tmp/post_partition.ks
@@ -285,6 +302,8 @@ echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.c
%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
#!/bin/sh
+set -x
+
SOURCE="/mnt/sysimage/tmp/source"
for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
@@ -342,6 +361,7 @@ function save_cfg {
else
echo GATEWAY=$gw >> /etc/sysconfig/network
fi
+ [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images
}
# Default FQDN
@@ -356,6 +376,7 @@ gw=$gw
device="eth0"
hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
dhcp_interface=$dhcp_interface
+build_images=$build_images
save_cfg
# Mounting installation source
@@ -366,7 +387,9 @@ echo
mkdir -p ${SOURCE}
mkdir -p ${FS}
-if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE}
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
mount -o loop ${FS}/nailgun.iso ${SOURCE}
fi
@@ -390,61 +413,47 @@ cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
# Copying Ubuntu files
mkdir -p ${repodir}/ubuntu/x86_64/images
-cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64
cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64
cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
-cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images
-cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images
+
+# We do not ship debian-installer kernel and initrd on ISO.
+# But we still need to be able to create ubuntu cobbler distro
+# which requires kernel and initrd to be available. So, we
+# just touch these files to work around cobbler's limitation.
+touch ${repodir}/ubuntu/x86_64/images/linux
+touch ${repodir}/ubuntu/x86_64/images/initrd.gz
# make links for backward compatibility
ln -s ${repodir}/centos ${wwwdir}/centos
ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
-# Copying bootstrap image
-mkdir -p ${wwwdir}/bootstrap
-cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap
-cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap
-
-# Copying target images
-cp -r ${SOURCE}/targetimages ${wwwdir}
-
-mkdir -p /root/.ssh
-chmod 700 /root/.ssh
-cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh
-chmod 600 /root/.ssh/bootstrap.rsa
-
# --------------------------
# UNPACKING PUPPET MANIFESTS
# --------------------------
# create folders
-mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
-mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
-rm -rf /etc/puppet/modules/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+#rm -rf /etc/puppet/modules/
# TODO(ikalnitsky): investigate why we need this
-cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
# place modules and manifests
-tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
-cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
# make links for backward compatibility
-pushd /etc/puppet
-ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
-ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
-popd
+#pushd /etc/puppet
+#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+#popd
cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
mkdir -p /var/lib/hiera
touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
-# Deploy docker images and ctl tools if we built ISO with docker containers support
-[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker
-
# Prepare local repository specification
rm /etc/yum.repos.d/CentOS*.repo
cat > /etc/yum.repos.d/nailgun.repo << EOF
@@ -461,6 +470,24 @@ sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf
# Disable GSSAPI in ssh server config
sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+# Enable MOTD banner in sshd
+sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config
+
+# Add note regarding local repos creation to MOTD
+cat >> /etc/motd << EOF
+
+All environments use online repositories by default.
+Use the following commands to create local repositories
+on master node and change default repository settings:
+
+* CentOS: fuel-package-updates (see --help for options)
+* Ubuntu: fuel-createmirror (see --help for options)
+
+Please refer to the following guide for more information:
+https://docs.mirantis.com/openstack/fuel/fuel-6.1/reference-architecture.html#fuel-rep-mirror
+
+EOF
+
# Copying bootstrap_admin_node.sh, chmod it and
# adding /etc/init/bootstrap_admin_node.conf
cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
@@ -540,10 +567,7 @@ rm -rf ${SOURCE}
umount -f ${FS} || true
rm -rf ${FS}
-# Enabling/configuring NTPD and ntpdate services
-echo "server 127.127.1.0" >> /etc/ntp.conf
-echo "fudge 127.127.1.0 stratum 10" >> /etc/ntp.conf
-echo "tos orphan 7" >> /etc/ntp.conf
+echo "tos orphan 7" >> /etc/ntp.conf
# Do not show error message on ntpdate failure. Customers should not be confused
# if admin node does not have access to the internet time servers.
diff --git a/fuel/build/f_isoroot/f_predeployment/Makefile b/fuel/build/f_isoroot/f_predeployment/Makefile
deleted file mode 100644
index a5252df..0000000
--- a/fuel/build/f_isoroot/f_predeployment/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-TOP := $(shell pwd)
-
-.PHONY: all
-all:
- @mkdir -p release/opnfv
- @cp pre-deploy.sh release/opnfv
- @cp sysinfo.sh release/opnfv
- @cp transform_yaml.py release/opnfv
- @chmod 755 release/opnfv/*
-
-.PHONY: clean
-clean:
- @rm -rf release
-
-
-.PHONY: release
-release:clean all
- @cp -Rvp release/* ../release
diff --git a/fuel/build/f_isoroot/f_predeployment/README b/fuel/build/f_isoroot/f_predeployment/README
deleted file mode 100644
index 3eef9f2..0000000
--- a/fuel/build/f_isoroot/f_predeployment/README
+++ /dev/null
@@ -1,18 +0,0 @@
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-This is the start of the interactive frontend that will add OPNFV configuration into
-the astute.yaml of the nodes. Currently just a test setup - prepare an installation
-up to the point of "deploy changes", but run "./pre-deploy.sh <envid> fragment.yaml"
-before actually hitting deploy, which will make sure to add the example fragment to
-the nodes.
-
-Note that the only part of the fragment.yaml that actually is acted on is the hosts
-part at this time.
diff --git a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh b/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh
deleted file mode 100755
index c5c6c42..0000000
--- a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh
+++ /dev/null
@@ -1,401 +0,0 @@
-#!/bin/bash -e
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-
-error_exit () {
- echo "$@" >&2
- exit 1
-}
-
-get_env() {
- local env_id=${1:-""}
-
- if [ -z $env_id ]; then
- local n_envs=$(fuel env --list | grep -v -E "^id|^--|^ *$" | wc -l)
- if [ $n_envs -ne 1 ]; then
- echo "Usage: $0 [<env-id>]" >&2
- error_exit "If only a single environment is present it can be left" \
- "out. Otherwise the environment must be selected"
- fi
- env_id=$(fuel env --list | grep -v -E "^id|^--" | awk '{print $1}')
- else
- if ! fuel --env $env_id environment 2>/dev/null grep -v -E "^id|^--" | \
- grep -q ^$env_id; then
- error_exit "No such environment ID: $env_id"
- fi
- fi
- echo $env_id
-}
-
-get_node_uid () {
- cat $1 | grep "^uid: " | sed "s/^uid: '//" | sed "s/'$//"
-}
-
-get_node_role () {
- cat $1 | grep "^role: " | sed "s/^role: //"
-}
-
-get_next_cic () {
- file=$1
-
- last=`cat $file | sed 's/.*://' | grep "cic-" | sed 's/cic\-.*sl//' | sort -n | tail -1`
- if [ -z "$last" ]; then
- next=1
- else
- next=$[$last + 2]
- fi
- echo $next
-}
-
-get_next_compute () {
- file=$1
-
- last=`cat $file | sed 's/.*://' | grep "cmp-" | sed 's/cmp\-.*sl//' | sort -n | tail -1`
- if [ -z "$last" ]; then
- next=7
- else
- next=$[$last + 2]
- fi
- echo $next
-}
-
-modify_hostnames () {
- env=$1
- file=$2
- for line in `cat $file`
- do
- old=`echo $line | sed 's/:.*//'`
- new=`echo $line | sed 's/.*://'`
- echo "Applying: $old -> $new"
-
- for dfile in deployment_$env/*.yaml
- do
- sed -i "s/$old/$new/g" $dfile
- done
-
- for pfile in provisioning_$env/*.yaml
- do
- sed -i "s/$old/$new/g" $pfile
- done
- done
-}
-
-setup_hostnames () {
- ENV=$1
- cd ${CONFIGDIR}
- touch hostnames.$ENV
-
- for dfile in deployment_$ENV/*.yaml
- do
- uid=`get_node_uid $dfile`
- hostname=`grep "^node-$uid:" hostnames.$ENV | sed 's/.*://'`
- if [ -z $hostname ]; then
-
- pfile=provisioning_$ENV/node-$uid.yaml
- role=`get_node_role $dfile`
-
- case $role in
- primary-controller)
- hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`"
- ;;
- controller)
- hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`"
- ;;
- compute)
- hostname="cmp-pod0-sh0-sl`get_next_compute hostnames.$ENV`"
- ;;
- *)
- echo "Unknown node type for UID $uid"
- exit 1
- ;;
- esac
-
- echo "node-$uid:$hostname" >> hostnames.$ENV
- else
- echo "Already got hostname $hostname for node-$uid"
-
- fi
- done
-
- rm -f hostnames.$ENV.old
- mv hostnames.$ENV hostnames.$ENV.old
- sort hostnames.$ENV.old | uniq > hostnames.$ENV
- modify_hostnames $ENV hostnames.$ENV
-}
-
-
-
-get_provisioning_info () {
- ENV=$1
- mkdir -p ${CONFIGDIR}
- cd ${CONFIGDIR}
- rm -Rf provisioning_$ENV
- echo "Getting provisioning info..."
- fuel --env $ENV provisioning --default
- if [ $? -ne 0 ]; then
- echo "Error: Could not get provisioning info for env $ENV">&2
- exit 1
- fi
-}
-
-get_deployment_info () {
- ENV=$1
- mkdir -p ${CONFIGDIR}
- cd ${CONFIGDIR}
- rm -Rf deployment_$ENV
- echo "Getting deployment info..."
- fuel --env $ENV deployment --default
- if [ $? -ne 0 ]; then
- echo "Error: Could not get deployment info for env $ENV">&2
- exit 1
- fi
-}
-
-transform_yaml () {
- ENV=$1
- cd ${CONFIGDIR}
- for dfile in deployment_$ENV/*.yaml
- do
- /opt/opnfv/transform_yaml.py $dfile
- done
-}
-
-commit_changes () {
- ENV=$1
- cd ${CONFIGDIR}
-
- fuel --env $ENV deployment --upload
- fuel --env $ENV provisioning --upload
-}
-
-add_yaml_fragment () {
- ENV=$1
- FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV
-
- cd ${CONFIGDIR}
- for dfile in deployment_$ENV/*.yaml
- do
- cnt=`grep "^opnfv:" $dfile | wc -l `
- if [ $cnt -eq 0 ]; then
- echo "Adding fragment to $dfile"
- cat $FRAGMENT >> $dfile
- else
- echo "Already have fragment in $dfile"
- fi
- done
-}
-
-
-ip_valid() {
- IP_ADDRESS="$1"
- # Check if the format looks right_
- echo "$IP_ADDRESS" | egrep -qE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' || return 1
- #check that each octect is less than or equal to 255:
- echo $IP_ADDRESS | awk -F'.' '$1 <=255 && $2 <= 255 && $3 <=255 && $4 <= 255 {print "Y" } ' | grep -q Y || return 1
- return 0
-}
-
-
-generate_ntp_entry() {
- FILE=$1
- read -p "NTP server:" NTP_SERVER
- if [ -z "$NTP_SERVER" ]; then
- return 1
- elif confirm_yes "Are you sure you want to add this entry (y/n): "; then
- echo "Confirmed"
- echo " server $NTP_SERVER" >> $FILE
- fi
-}
-
-generate_hostfile_entry() {
- FILE=$1
- read -p "Name:" HOST_NAME
- if [ -z "$HOST_NAME" ]; then
- return 1
- else
- read -p "FQDN:" HOST_FQDN
- read -p "IP: " HOST_IP
- while ! ip_valid "$HOST_IP"
- do
- echo "This is not a valid IP! Try again."
- read -p "IP: " HOST_IP
- done
- fi
- if confirm_yes "Are you sure you want to add this entry (y/n): "; then
- echo "Confirmed"
- echo " - name: $HOST_NAME" >> $FILE
- echo " address: $HOST_IP" >> $FILE
- echo " fqdn: $HOST_FQDN" >> $FILE
- else
- echo "Not confirmed"
- fi
- return 0
-}
-
-generate_dns_entry() {
- FILE=$1
- PROMPT=$2
- read -p "${PROMPT}:" DNS_IP
- if [ -z "$DNS_IP" ]; then
- return 1
- else
- while ! ip_valid "$DNS_IP"
- do
- echo "This is not a valid IP! Try again."
- read -p "${PROMPT}: " DNS_IP
- done
- fi
- if confirm_yes "Are you sure you want to add this entry (y/n): "; then
- echo "Confirmed"
- echo " - $DNS_IP" >> $FILE
- else
- echo "Not confirmed"
- fi
- return 0
-}
-
-confirm_yes() {
- prompt=$1
- while true
- do
- read -p "$prompt" YESNO
- case $YESNO in
- [Yy])
- return 0
- ;;
- [Nn])
- return 1
- ;;
- esac
- done
-}
-
-generate_yaml_fragment() {
- ENV=$1
- FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV
-
- if [ -f $FRAGMENT ]; then
- echo "Manual configuration already performed, reusing previous data from $FRAGMENT."
- echo "Press return to continue or ^C to stop."
- read ans
- return
- fi
-
- echo "opnfv:" > ${FRAGMENT}
-
- clear
- echo -e "\n\nPre-deployment configuration\n\n"
-
- echo -e "\n\nIPs for the DNS servers to go into /etc/resolv.conf. You will be"
- echo -e "prompted for one IP at the time. Press return on an empty line"
- echo -e "to complete your input. If no DNS server is specified, the IP of"
- echo -e "the Fuel master will be used instead.\n"
-
- DNSCICYAML=${CONFIGDIR}/cicdns.yaml.$ENV
- rm -f $DNSCICYAML
-
- echo -e "\n\n"
-
- while generate_dns_entry $DNSCICYAML "IP for CIC name servers"
- do
- :
- done
-
- if [ -f $DNSCICYAML ]; then
- echo " dns:" >> $FRAGMENT
- echo " controller:" >> $FRAGMENT
- cat $DNSCICYAML >> $FRAGMENT
- fi
-
-
- DNSCMPYAML=${CONFIGDIR}/cmpdns.yaml.$ENV
- rm -f $DNSCMPYAML
-
- echo -e "\n\n"
-
- while generate_dns_entry $DNSCMPYAML "IP for compute node name servers"
- do
- :
- done
-
-
- if [ -f $DNSCMPYAML ]; then
- if [ ! -f $DNSCICYAML ]; then
- echo " dns:" >> $FRAGMENT
- fi
- echo " compute:" >> $FRAGMENT
- cat $DNSCMPYAML >> $FRAGMENT
- fi
-
- echo -e "\n\nHosts file additions for controllers and compute nodes. You will be"
- echo -e "prompted for name, FQDN and IP for each entry. Press return when prompted"
- echo -e "for a name when you have completed your input.\n"
-
-
- HOSTYAML=${CONFIGDIR}/hosts.yaml.$ENV
- rm -f $HOSTYAML
- while generate_hostfile_entry $HOSTYAML
- do
- :
- done
-
- if [ -f $HOSTYAML ]; then
- echo " hosts:" >> $FRAGMENT
- cat $HOSTYAML >> $FRAGMENT
- fi
-
- echo -e "\n\nNTP upstream configuration for controllers.You will be"
- echo -e "prompted for a NTP server each entry. Press return when prompted"
- echo -e "for a NTP serverwhen you have completed your input.\n"
-
-
- NTPYAML=${CONFIGDIR}/ntp.yaml.$ENV
- rm -f $NTPYAML
- while generate_ntp_entry $NTPYAML
- do
- :
- done
-
- if [ -f $NTPYAML ]; then
- echo " ntp:" >> $FRAGMENT
- echo " controller: |" >> $FRAGMENT
- cat $NTPYAML >> $FRAGMENT
-
- echo " compute: |" >> $FRAGMENT
- for ctl in `find $CONFIGDIR/deployment_$ENV -name '*controller*.yaml'`
- do
- fqdn=`grep "^fqdn:" $ctl | sed 's/fqdn: *//'`
- echo " server $fqdn" >> $FRAGMENT
- done
- fi
-
- # If nothing added make sure we get an empty opnfv hash
- # instead of a NULL hash.
- if [ $(wc -l $FRAGMENT | awk '{print $1}') -le 1 ]; then
- echo "opnfv: {}" >$FRAGMENT
- fi
-}
-
-ENV=$(get_env "$@")
-
-CONFIGDIR="/var/lib/opnfv"
-mkdir -p $CONFIGDIR
-
-get_deployment_info $ENV
-# Uncomment the below to enable the control_bond example
-#transform_yaml $ENV
-get_provisioning_info $ENV
-generate_yaml_fragment $ENV
-# The feature to change hostnames from node-<n> to cmp- or cic- is disabled.
-# To turn it on, uncomment the following line.
-#setup_hostnames $ENV
-add_yaml_fragment $ENV
-commit_changes $ENV
diff --git a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh b/fuel/build/f_isoroot/f_predeployment/sysinfo.sh
deleted file mode 100755
index e99cac0..0000000
--- a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-dockerctl shell cobbler cobbler system list | grep -v default | xargs -n 1 host | sort | sed 's/\..* /\t/'
diff --git a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py b/fuel/build/f_isoroot/f_predeployment/transform_yaml.py
deleted file mode 100755
index 14eec4c..0000000
--- a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/usr/bin/python
-##############################################################################
-# Copyright (c) 2015 Ericsson AB and others.
-# stefan.k.berg@ericsson.com
-# jonas.bjurel@ericsson.com
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Apache License, Version 2.0
-# which accompanies this distribution, and is available at
-# http://www.apache.org/licenses/LICENSE-2.0
-##############################################################################
-
-# Remove control and management network transformations from file.
-# Only to be used together with f_control_bond_example (enable in
-# pre-deploy.sh)
-
-import yaml
-import re
-import sys
-import os
-
-if len(sys.argv) != 2:
- sys.stderr.write("Usage: "+sys.argv[0]+" <filename>\n")
- sys.exit(1)
-
-filename = sys.argv[1]
-if not os.path.exists(filename):
- sys.stderr.write("ERROR: The file "+filename+" could not be opened\n")
- sys.exit(1)
-
-ignore_values = [ "eth0", "eth1", "br-mgmt", "br-fw-admin" ]
-
-infile = open(filename, 'r')
-doc = yaml.load(infile)
-infile.close()
-
-out={}
-
-for scheme in doc:
- if scheme == "network_scheme":
- mytransformation = {}
- for operation in doc[scheme]:
- if operation == "transformations":
- # We need the base bridges for l23network to be happy,
- # remove everything else.
- mytrans = [ { "action": "add-br", "name": "br-mgmt" },
- { "action": "add-br", "name": "br-fw-admin" } ]
- for trans in doc[scheme][operation]:
- delete = 0
- for ignore in ignore_values:
- matchObj = re.search(ignore,str(trans))
- if matchObj:
- delete = 1
- if delete == 0:
- mytrans.append(trans)
- else:
- pass
- #print "Deleted", trans
-
- mytransformation[operation] = mytrans
- else:
- mytransformation[operation] = doc[scheme][operation]
- out[scheme] = mytransformation
- else:
- out[scheme] = doc[scheme]
-
-outfile = open(filename, 'w')
-outfile.write(yaml.dump(out, default_flow_style=False))
-outfile.close()