diff options
Diffstat (limited to 'fuel/build/f_isoroot')
| -rw-r--r-- | fuel/build/f_isoroot/Makefile | 2 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh | 107 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig | 108 | ||||
| -rw-r--r--[-rwxr-xr-x] | fuel/build/f_isoroot/f_kscfg/ks.cfg | 122 | ||||
| -rw-r--r-- | fuel/build/f_isoroot/f_kscfg/ks.cfg.orig | 120 | ||||
| -rw-r--r-- | fuel/build/f_isoroot/f_predeployment/Makefile | 28 | ||||
| -rw-r--r-- | fuel/build/f_isoroot/f_predeployment/README | 18 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/pre-deploy.sh | 401 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/sysinfo.sh | 12 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/transform_yaml.py | 68 |
10 files changed, 321 insertions, 665 deletions
diff --git a/fuel/build/f_isoroot/Makefile b/fuel/build/f_isoroot/Makefile index bde8e64..8a7f48a 100644 --- a/fuel/build/f_isoroot/Makefile +++ b/fuel/build/f_isoroot/Makefile @@ -8,7 +8,7 @@ # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## -SUBDIRS = f_predeployment f_kscfg f_bootstrap +SUBDIRS = f_kscfg f_bootstrap SUBCLEAN = $(addsuffix .clean,$(SUBDIRS)) .PHONY: all diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh index 348ce3c..8bdf566 100755 --- a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh +++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh @@ -1,4 +1,5 @@ #!/bin/bash +FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ') function countdown() { local i @@ -47,9 +48,6 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then { kill "$pid"; wait $!; } 2>/dev/null case "$key" in $'\e') echo "Skipping Fuel Setup.." - echo -n "Applying default Fuel setings..." - fuelmenu --save-only --iface=eth0 - echo "Done!" ;; *) echo -e "\nEntering Fuel Setup..." fuelmenu @@ -57,30 +55,51 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then esac fi fi + + #Reread /etc/sysconfig/network to inform puppet of changes . /etc/sysconfig/network hostname "$HOSTNAME" -### docker stuff -images_dir="/var/www/nailgun/docker/images" +service docker start -# extract docker images -mkdir -p $images_dir $sources_dir -rm -f $images_dir/*tar -pushd $images_dir &>/dev/null +if [ -f /root/.build_images ]; then + #Fail on all errors + set -e + trap fail EXIT -echo "Extracting and loading docker images. (This may take a while)" -lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar -popd &>/dev/null -service docker start + echo "Loading Fuel base image for Docker..." + docker load -i /var/www/nailgun/docker/images/fuel-images.tar -# load docker images -for image in $images_dir/*tar ; do - echo "Loading docker image ${image}..." - docker load -i "$image" - # clean up extracted image - rm -f "$image" -done + echo "Building Fuel Docker images..." + WORKDIR=$(mktemp -d /tmp/docker-buildXXX) + SOURCE=/var/www/nailgun/docker + REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND') + RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2) + + for imagesource in /var/www/nailgun/docker/sources/*; do + if ! [ -f "$imagesource/Dockerfile" ]; then + echo "Skipping ${imagesource}..." + continue + fi + image=$(basename "$imagesource") + cp -R "$imagesource" $WORKDIR/$image + mkdir -p $WORKDIR/$image/etc + cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc + sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile + sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml + docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image + done + docker rm -f $REPO_CONT_ID + rm -rf "$WORKDIR" + + #Remove trap for normal deployment + trap - EXIT + set +e +else + echo "Loading docker images. (This may take a while)" + docker load -i /var/www/nailgun/docker/images/fuel-images.tar +fi # apply puppet puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp @@ -102,4 +121,52 @@ done shopt -u nullglob ### OPNFV addition END +# Enable updates repository +cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF +[mos${FUEL_RELEASE}-updates] +name=mos${FUEL_RELEASE}-updates +baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/updates/ +gpgcheck=0 +skip_if_unavailable=1 +EOF + +# Enable security repository +cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF +[mos${FUEL_RELEASE}-security] +name=mos${FUEL_RELEASE}-security +baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/security/ +gpgcheck=0 +skip_if_unavailable=1 +EOF + +#Check if repo is accessible +echo "Checking for access to updates repository..." +repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1) +if urlaccesscheck check "$repourl" ; then + UPDATE_ISSUES=0 +else + UPDATE_ISSUES=1 +fi + +if [ $UPDATE_ISSUES -eq 1 ]; then + warning="WARNING: There are issues connecting to Fuel update repository.\ +\nPlease fix your connection and update this node with \`yum update\`\ +\nThen run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\ +\nto repeat bootstrap on Fuel Master with the latest updates.\ +\nFor more information, check out Fuel documentation at:\ +\nhttp://docs.mirantis.com/fuel" +else + warning="WARNING: There may be updates available for Fuel.\ +\nYou should update this node with \`yum update\`. If there are available\ +\n updates, run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\ +\nto repeat bootstrap on Fuel Master with the latest updates.\ +\nFor more information, check out Fuel documentation at:\ +\nhttp://docs.mirantis.com/fuel" +fi +echo +echo "*************************************************" +echo -e "$warning" +echo "*************************************************" +echo "Sending notification to Fuel UI..." +fuel notify --topic warning --send "$warning" echo "Fuel node deployment complete!" diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig index 7b6e6bd..8d21c1e 100755 --- a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig +++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig @@ -1,4 +1,5 @@ #!/bin/bash +FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ') function countdown() { local i @@ -37,9 +38,6 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then { kill "$pid"; wait $!; } 2>/dev/null case "$key" in $'\e') echo "Skipping Fuel Setup.." - echo -n "Applying default Fuel setings..." - fuelmenu --save-only --iface=eth0 - echo "Done!" ;; *) echo -e "\nEntering Fuel Setup..." fuelmenu @@ -47,30 +45,51 @@ if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then esac fi fi + + #Reread /etc/sysconfig/network to inform puppet of changes . /etc/sysconfig/network hostname "$HOSTNAME" -### docker stuff -images_dir="/var/www/nailgun/docker/images" +service docker start -# extract docker images -mkdir -p $images_dir $sources_dir -rm -f $images_dir/*tar -pushd $images_dir &>/dev/null +if [ -f /root/.build_images ]; then + #Fail on all errors + set -e + trap fail EXIT -echo "Extracting and loading docker images. (This may take a while)" -lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar -popd &>/dev/null -service docker start + echo "Loading Fuel base image for Docker..." + docker load -i /var/www/nailgun/docker/images/fuel-images.tar + + echo "Building Fuel Docker images..." + WORKDIR=$(mktemp -d /tmp/docker-buildXXX) + SOURCE=/var/www/nailgun/docker + REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND') + RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2) + + for imagesource in /var/www/nailgun/docker/sources/*; do + if ! [ -f "$imagesource/Dockerfile" ]; then + echo "Skipping ${imagesource}..." + continue + fi + image=$(basename "$imagesource") + cp -R "$imagesource" $WORKDIR/$image + mkdir -p $WORKDIR/$image/etc + cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc + sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile + sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml + docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image + done + docker rm -f $REPO_CONT_ID + rm -rf "$WORKDIR" -# load docker images -for image in $images_dir/*tar ; do - echo "Loading docker image ${image}..." - docker load -i "$image" - # clean up extracted image - rm -f "$image" -done + #Remove trap for normal deployment + trap - EXIT + set +e +else + echo "Loading docker images. (This may take a while)" + docker load -i /var/www/nailgun/docker/images/fuel-images.tar +fi # apply puppet puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp @@ -81,4 +100,53 @@ rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote dockerctl check || fail bash /etc/rc.local + +# Enable updates repository +cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF +[mos${FUEL_RELEASE}-updates] +name=mos${FUEL_RELEASE}-updates +baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/updates/ +gpgcheck=0 +skip_if_unavailable=1 +EOF + +# Enable security repository +cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF +[mos${FUEL_RELEASE}-security] +name=mos${FUEL_RELEASE}-security +baseurl=http://mirror.fuel-infra.org/mos/centos-6/mos${FUEL_RELEASE}/security/ +gpgcheck=0 +skip_if_unavailable=1 +EOF + +#Check if repo is accessible +echo "Checking for access to updates repository..." +repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1) +if urlaccesscheck check "$repourl" ; then + UPDATE_ISSUES=0 +else + UPDATE_ISSUES=1 +fi + +if [ $UPDATE_ISSUES -eq 1 ]; then + warning="WARNING: There are issues connecting to Fuel update repository.\ +\nPlease fix your connection and update this node with \`yum update\`\ +\nThen run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\ +\nto repeat bootstrap on Fuel Master with the latest updates.\ +\nFor more information, check out Fuel documentation at:\ +\nhttp://docs.mirantis.com/fuel" +else + warning="WARNING: There may be updates available for Fuel.\ +\nYou should update this node with \`yum update\`. If there are available\ +\n updates, run \`dockerctl destroy all; bootstrap_admin_node.sh;\`\ +\nto repeat bootstrap on Fuel Master with the latest updates.\ +\nFor more information, check out Fuel documentation at:\ +\nhttp://docs.mirantis.com/fuel" +fi +echo +echo "*************************************************" +echo -e "$warning" +echo "*************************************************" +echo "Sending notification to Fuel UI..." +fuel notify --topic warning --send "$warning" echo "Fuel node deployment complete!" diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg b/fuel/build/f_isoroot/f_kscfg/ks.cfg index 508f044..12cd1ab 100755..100644 --- a/fuel/build/f_isoroot/f_kscfg/ks.cfg +++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg @@ -26,10 +26,12 @@ skipx drives="" removable_drives="" for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do - if (grep -q 0 /sys/block/${drv}/removable); then - drives="${drives} ${drv}" - else - removable_drives="${removable_drives} ${drv}" + if !(blkid | grep -q "${drv}.*Fuel"); then + if (grep -q 0 /sys/block/${drv}/removable); then + drives="${drives} ${drv}" + else + removable_drives="${removable_drives} ${drv}" + fi fi done default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'` @@ -152,9 +154,9 @@ if [ "$format_confirmed" != "yes" ] ; then chvt 1 fi -# verify tgtdrive is at least 30GB +# verify tgtdrive is at least 41GB tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) -if [ $tgtdrivesize -lt 30720 ]; then +if [ $tgtdrivesize -lt 41984 ]; then exec < /dev/tty3 > /dev/tty3 2>&1 chvt 3 clear @@ -162,7 +164,7 @@ if [ $tgtdrivesize -lt 30720 ]; then echo '********************************************************************' echo '* E R R O R *' echo '* *' - echo '* Your disk is under 30GB in size. Installation cannot continue. *' + echo '* Your disk is under 41GB in size. Installation cannot continue. *' echo '* Restart installation with a larger disk. *' echo '* *' echo '********************************************************************' @@ -175,7 +177,9 @@ fi tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//') # source -if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then +if test -e /dev/disk/by-label/"OpenStack_Fuel"; then + echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks +elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks else echo "cdrom" > /tmp/source.ks @@ -204,16 +208,18 @@ else fi echo > /tmp/partition.ks echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks -echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks +echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks +echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks echo "volgroup os pv.001" >> /tmp/partition.ks echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var --vgname=os --size=10000 --percent 60 --grow --name=var --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var/log --vgname=os --size=4096 --percent 40 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks # bootloader -echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks +echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks # Anaconda can not install grub 0.97 on disks which are >4T. # The reason is that grub does not support such large geometries @@ -233,6 +239,9 @@ echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch %packages --nobase --excludedocs @Core +fuel +fuel-library +fuel-dockerctl authconfig bind-utils cronie @@ -241,7 +250,12 @@ curl daemonize dhcp docker-io +fuel-bootstrap-image +fuel-createmirror +fuel-target-centos-images +fuel-package-updates fuelmenu +fuel-docker-images gdisk lrzip lsof @@ -249,8 +263,10 @@ man mlocate nmap-ncat ntp +ntpdate openssh-clients policycoreutils +python-daemon rsync ruby21-puppet ruby21-rubygem-netaddr @@ -266,6 +282,7 @@ vim-enhanced virt-what wget yum +yum-plugin-priorities %include /tmp/post_partition.ks @@ -285,6 +302,8 @@ echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.c %post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log #!/bin/sh +set -x + SOURCE="/mnt/sysimage/tmp/source" for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done @@ -342,6 +361,7 @@ function save_cfg { else echo GATEWAY=$gw >> /etc/sysconfig/network fi + [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images } # Default FQDN @@ -356,6 +376,7 @@ gw=$gw device="eth0" hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` dhcp_interface=$dhcp_interface +build_images=$build_images save_cfg # Mounting installation source @@ -366,7 +387,9 @@ echo mkdir -p ${SOURCE} mkdir -p ${FS} -if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then +if test -e /dev/disk/by-label/"OpenStack_Fuel"; then + mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE} +elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS} mount -o loop ${FS}/nailgun.iso ${SOURCE} fi @@ -390,61 +413,47 @@ cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64 # Copying Ubuntu files mkdir -p ${repodir}/ubuntu/x86_64/images -cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64 cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64 cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images -cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images + +# We do not ship debian-installer kernel and initrd on ISO. +# But we still need to be able to create ubuntu cobbler distro +# which requires kernel and initrd to be available. So, we +# just touch these files to work around cobbler's limitation. +touch ${repodir}/ubuntu/x86_64/images/linux +touch ${repodir}/ubuntu/x86_64/images/initrd.gz # make links for backward compatibility ln -s ${repodir}/centos ${wwwdir}/centos ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu -# Copying bootstrap image -mkdir -p ${wwwdir}/bootstrap -cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap -cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap - -# Copying target images -cp -r ${SOURCE}/targetimages ${wwwdir} - -mkdir -p /root/.ssh -chmod 700 /root/.ssh -cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh -chmod 600 /root/.ssh/bootstrap.rsa - # -------------------------- # UNPACKING PUPPET MANIFESTS # -------------------------- # create folders -mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/ -mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/ -rm -rf /etc/puppet/modules/ +#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/ +#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/ +#rm -rf /etc/puppet/modules/ # TODO(ikalnitsky): investigate why we need this -cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/ +#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/ # place modules and manifests -tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules -cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp +#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules +#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/ # make links for backward compatibility -pushd /etc/puppet -ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests -ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules -popd +#pushd /etc/puppet +#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests +#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules +#popd cp ${SOURCE}/send2syslog.py /bin/send2syslog.py mkdir -p /var/lib/hiera touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml -# Deploy docker images and ctl tools if we built ISO with docker containers support -[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker - # Prepare local repository specification rm /etc/yum.repos.d/CentOS*.repo cat > /etc/yum.repos.d/nailgun.repo << EOF @@ -461,6 +470,24 @@ sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf # Disable GSSAPI in ssh server config sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config +# Enable MOTD banner in sshd +sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config + +# Add note regarding local repos creation to MOTD +cat >> /etc/motd << EOF + +All environments use online repositories by default. +Use the following commands to create local repositories +on master node and change default repository settings: + +* CentOS: fuel-package-updates (see --help for options) +* Ubuntu: fuel-createmirror (see --help for options) + +Please refer to the following guide for more information: +https://docs.mirantis.com/openstack/fuel/fuel-6.1/reference-architecture.html#fuel-rep-mirror + +EOF + # Copying bootstrap_admin_node.sh, chmod it and # adding /etc/init/bootstrap_admin_node.conf cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh @@ -546,10 +573,7 @@ rm -rf ${SOURCE} umount -f ${FS} || true rm -rf ${FS} -# Enabling/configuring NTPD and ntpdate services -echo "server 127.127.1.0" >> /etc/ntp.conf -echo "fudge 127.127.1.0 stratum 10" >> /etc/ntp.conf -echo "tos orphan 7" >> /etc/ntp.conf +echo "tos orphan 7" >> /etc/ntp.conf # Do not show error message on ntpdate failure. Customers should not be confused # if admin node does not have access to the internet time servers. @@ -571,4 +595,4 @@ cp -f /etc/skel/.bash* /root/ # Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors [[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf -%end +%end
\ No newline at end of file diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig index bddf99c..cf8cf80 100644 --- a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig +++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig @@ -26,10 +26,12 @@ skipx drives="" removable_drives="" for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do - if (grep -q 0 /sys/block/${drv}/removable); then - drives="${drives} ${drv}" - else - removable_drives="${removable_drives} ${drv}" + if !(blkid | grep -q "${drv}.*Fuel"); then + if (grep -q 0 /sys/block/${drv}/removable); then + drives="${drives} ${drv}" + else + removable_drives="${removable_drives} ${drv}" + fi fi done default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'` @@ -152,9 +154,9 @@ if [ "$format_confirmed" != "yes" ] ; then chvt 1 fi -# verify tgtdrive is at least 30GB +# verify tgtdrive is at least 41GB tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) -if [ $tgtdrivesize -lt 30720 ]; then +if [ $tgtdrivesize -lt 41984 ]; then exec < /dev/tty3 > /dev/tty3 2>&1 chvt 3 clear @@ -162,7 +164,7 @@ if [ $tgtdrivesize -lt 30720 ]; then echo '********************************************************************' echo '* E R R O R *' echo '* *' - echo '* Your disk is under 30GB in size. Installation cannot continue. *' + echo '* Your disk is under 41GB in size. Installation cannot continue. *' echo '* Restart installation with a larger disk. *' echo '* *' echo '********************************************************************' @@ -175,7 +177,9 @@ fi tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//') # source -if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then +if test -e /dev/disk/by-label/"OpenStack_Fuel"; then + echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks +elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks else echo "cdrom" > /tmp/source.ks @@ -204,16 +208,18 @@ else fi echo > /tmp/partition.ks echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks -echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks +echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks +echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks echo "volgroup os pv.001" >> /tmp/partition.ks echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var --vgname=os --size=10000 --percent 60 --grow --name=var --fstype=ext4" >> /tmp/partition.ks -echo "logvol /var/log --vgname=os --size=4096 --percent 40 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks +echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks # bootloader -echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks +echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks # Anaconda can not install grub 0.97 on disks which are >4T. # The reason is that grub does not support such large geometries @@ -233,6 +239,9 @@ echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch %packages --nobase --excludedocs @Core +fuel +fuel-library +fuel-dockerctl authconfig bind-utils cronie @@ -241,7 +250,12 @@ curl daemonize dhcp docker-io +fuel-bootstrap-image +fuel-createmirror +fuel-target-centos-images +fuel-package-updates fuelmenu +fuel-docker-images gdisk lrzip lsof @@ -249,8 +263,10 @@ man mlocate nmap-ncat ntp +ntpdate openssh-clients policycoreutils +python-daemon rsync ruby21-puppet ruby21-rubygem-netaddr @@ -266,6 +282,7 @@ vim-enhanced virt-what wget yum +yum-plugin-priorities %include /tmp/post_partition.ks @@ -285,6 +302,8 @@ echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.c %post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log #!/bin/sh +set -x + SOURCE="/mnt/sysimage/tmp/source" for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done @@ -342,6 +361,7 @@ function save_cfg { else echo GATEWAY=$gw >> /etc/sysconfig/network fi + [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images } # Default FQDN @@ -356,6 +376,7 @@ gw=$gw device="eth0" hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` dhcp_interface=$dhcp_interface +build_images=$build_images save_cfg # Mounting installation source @@ -366,7 +387,9 @@ echo mkdir -p ${SOURCE} mkdir -p ${FS} -if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then +if test -e /dev/disk/by-label/"OpenStack_Fuel"; then + mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE} +elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS} mount -o loop ${FS}/nailgun.iso ${SOURCE} fi @@ -390,61 +413,47 @@ cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64 # Copying Ubuntu files mkdir -p ${repodir}/ubuntu/x86_64/images -cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64 cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64 cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64 -cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images -cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images + +# We do not ship debian-installer kernel and initrd on ISO. +# But we still need to be able to create ubuntu cobbler distro +# which requires kernel and initrd to be available. So, we +# just touch these files to work around cobbler's limitation. +touch ${repodir}/ubuntu/x86_64/images/linux +touch ${repodir}/ubuntu/x86_64/images/initrd.gz # make links for backward compatibility ln -s ${repodir}/centos ${wwwdir}/centos ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu -# Copying bootstrap image -mkdir -p ${wwwdir}/bootstrap -cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap -cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap - -# Copying target images -cp -r ${SOURCE}/targetimages ${wwwdir} - -mkdir -p /root/.ssh -chmod 700 /root/.ssh -cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh -chmod 600 /root/.ssh/bootstrap.rsa - # -------------------------- # UNPACKING PUPPET MANIFESTS # -------------------------- # create folders -mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/ -mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/ -rm -rf /etc/puppet/modules/ +#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/ +#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/ +#rm -rf /etc/puppet/modules/ # TODO(ikalnitsky): investigate why we need this -cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/ +#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/ # place modules and manifests -tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules -cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp +#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules +#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/ # make links for backward compatibility -pushd /etc/puppet -ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests -ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules -popd +#pushd /etc/puppet +#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests +#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules +#popd cp ${SOURCE}/send2syslog.py /bin/send2syslog.py mkdir -p /var/lib/hiera touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml -# Deploy docker images and ctl tools if we built ISO with docker containers support -[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker - # Prepare local repository specification rm /etc/yum.repos.d/CentOS*.repo cat > /etc/yum.repos.d/nailgun.repo << EOF @@ -461,6 +470,24 @@ sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf # Disable GSSAPI in ssh server config sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config +# Enable MOTD banner in sshd +sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config + +# Add note regarding local repos creation to MOTD +cat >> /etc/motd << EOF + +All environments use online repositories by default. +Use the following commands to create local repositories +on master node and change default repository settings: + +* CentOS: fuel-package-updates (see --help for options) +* Ubuntu: fuel-createmirror (see --help for options) + +Please refer to the following guide for more information: +https://docs.mirantis.com/openstack/fuel/fuel-6.1/reference-architecture.html#fuel-rep-mirror + +EOF + # Copying bootstrap_admin_node.sh, chmod it and # adding /etc/init/bootstrap_admin_node.conf cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh @@ -540,10 +567,7 @@ rm -rf ${SOURCE} umount -f ${FS} || true rm -rf ${FS} -# Enabling/configuring NTPD and ntpdate services -echo "server 127.127.1.0" >> /etc/ntp.conf -echo "fudge 127.127.1.0 stratum 10" >> /etc/ntp.conf -echo "tos orphan 7" >> /etc/ntp.conf +echo "tos orphan 7" >> /etc/ntp.conf # Do not show error message on ntpdate failure. Customers should not be confused # if admin node does not have access to the internet time servers. diff --git a/fuel/build/f_isoroot/f_predeployment/Makefile b/fuel/build/f_isoroot/f_predeployment/Makefile deleted file mode 100644 index a5252df..0000000 --- a/fuel/build/f_isoroot/f_predeployment/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -TOP := $(shell pwd) - -.PHONY: all -all: - @mkdir -p release/opnfv - @cp pre-deploy.sh release/opnfv - @cp sysinfo.sh release/opnfv - @cp transform_yaml.py release/opnfv - @chmod 755 release/opnfv/* - -.PHONY: clean -clean: - @rm -rf release - - -.PHONY: release -release:clean all - @cp -Rvp release/* ../release diff --git a/fuel/build/f_isoroot/f_predeployment/README b/fuel/build/f_isoroot/f_predeployment/README deleted file mode 100644 index 3eef9f2..0000000 --- a/fuel/build/f_isoroot/f_predeployment/README +++ /dev/null @@ -1,18 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -This is the start of the interactive frontend that will add OPNFV configuration into -the astute.yaml of the nodes. Currently just a test setup - prepare an installation -up to the point of "deploy changes", but run "./pre-deploy.sh <envid> fragment.yaml" -before actually hitting deploy, which will make sure to add the example fragment to -the nodes. - -Note that the only part of the fragment.yaml that actually is acted on is the hosts -part at this time. diff --git a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh b/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh deleted file mode 100755 index c5c6c42..0000000 --- a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh +++ /dev/null @@ -1,401 +0,0 @@ -#!/bin/bash -e -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - - -error_exit () { - echo "$@" >&2 - exit 1 -} - -get_env() { - local env_id=${1:-""} - - if [ -z $env_id ]; then - local n_envs=$(fuel env --list | grep -v -E "^id|^--|^ *$" | wc -l) - if [ $n_envs -ne 1 ]; then - echo "Usage: $0 [<env-id>]" >&2 - error_exit "If only a single environment is present it can be left" \ - "out. Otherwise the environment must be selected" - fi - env_id=$(fuel env --list | grep -v -E "^id|^--" | awk '{print $1}') - else - if ! fuel --env $env_id environment 2>/dev/null grep -v -E "^id|^--" | \ - grep -q ^$env_id; then - error_exit "No such environment ID: $env_id" - fi - fi - echo $env_id -} - -get_node_uid () { - cat $1 | grep "^uid: " | sed "s/^uid: '//" | sed "s/'$//" -} - -get_node_role () { - cat $1 | grep "^role: " | sed "s/^role: //" -} - -get_next_cic () { - file=$1 - - last=`cat $file | sed 's/.*://' | grep "cic-" | sed 's/cic\-.*sl//' | sort -n | tail -1` - if [ -z "$last" ]; then - next=1 - else - next=$[$last + 2] - fi - echo $next -} - -get_next_compute () { - file=$1 - - last=`cat $file | sed 's/.*://' | grep "cmp-" | sed 's/cmp\-.*sl//' | sort -n | tail -1` - if [ -z "$last" ]; then - next=7 - else - next=$[$last + 2] - fi - echo $next -} - -modify_hostnames () { - env=$1 - file=$2 - for line in `cat $file` - do - old=`echo $line | sed 's/:.*//'` - new=`echo $line | sed 's/.*://'` - echo "Applying: $old -> $new" - - for dfile in deployment_$env/*.yaml - do - sed -i "s/$old/$new/g" $dfile - done - - for pfile in provisioning_$env/*.yaml - do - sed -i "s/$old/$new/g" $pfile - done - done -} - -setup_hostnames () { - ENV=$1 - cd ${CONFIGDIR} - touch hostnames.$ENV - - for dfile in deployment_$ENV/*.yaml - do - uid=`get_node_uid $dfile` - hostname=`grep "^node-$uid:" hostnames.$ENV | sed 's/.*://'` - if [ -z $hostname ]; then - - pfile=provisioning_$ENV/node-$uid.yaml - role=`get_node_role $dfile` - - case $role in - primary-controller) - hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`" - ;; - controller) - hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`" - ;; - compute) - hostname="cmp-pod0-sh0-sl`get_next_compute hostnames.$ENV`" - ;; - *) - echo "Unknown node type for UID $uid" - exit 1 - ;; - esac - - echo "node-$uid:$hostname" >> hostnames.$ENV - else - echo "Already got hostname $hostname for node-$uid" - - fi - done - - rm -f hostnames.$ENV.old - mv hostnames.$ENV hostnames.$ENV.old - sort hostnames.$ENV.old | uniq > hostnames.$ENV - modify_hostnames $ENV hostnames.$ENV -} - - - -get_provisioning_info () { - ENV=$1 - mkdir -p ${CONFIGDIR} - cd ${CONFIGDIR} - rm -Rf provisioning_$ENV - echo "Getting provisioning info..." - fuel --env $ENV provisioning --default - if [ $? -ne 0 ]; then - echo "Error: Could not get provisioning info for env $ENV">&2 - exit 1 - fi -} - -get_deployment_info () { - ENV=$1 - mkdir -p ${CONFIGDIR} - cd ${CONFIGDIR} - rm -Rf deployment_$ENV - echo "Getting deployment info..." - fuel --env $ENV deployment --default - if [ $? -ne 0 ]; then - echo "Error: Could not get deployment info for env $ENV">&2 - exit 1 - fi -} - -transform_yaml () { - ENV=$1 - cd ${CONFIGDIR} - for dfile in deployment_$ENV/*.yaml - do - /opt/opnfv/transform_yaml.py $dfile - done -} - -commit_changes () { - ENV=$1 - cd ${CONFIGDIR} - - fuel --env $ENV deployment --upload - fuel --env $ENV provisioning --upload -} - -add_yaml_fragment () { - ENV=$1 - FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV - - cd ${CONFIGDIR} - for dfile in deployment_$ENV/*.yaml - do - cnt=`grep "^opnfv:" $dfile | wc -l ` - if [ $cnt -eq 0 ]; then - echo "Adding fragment to $dfile" - cat $FRAGMENT >> $dfile - else - echo "Already have fragment in $dfile" - fi - done -} - - -ip_valid() { - IP_ADDRESS="$1" - # Check if the format looks right_ - echo "$IP_ADDRESS" | egrep -qE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' || return 1 - #check that each octect is less than or equal to 255: - echo $IP_ADDRESS | awk -F'.' '$1 <=255 && $2 <= 255 && $3 <=255 && $4 <= 255 {print "Y" } ' | grep -q Y || return 1 - return 0 -} - - -generate_ntp_entry() { - FILE=$1 - read -p "NTP server:" NTP_SERVER - if [ -z "$NTP_SERVER" ]; then - return 1 - elif confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " server $NTP_SERVER" >> $FILE - fi -} - -generate_hostfile_entry() { - FILE=$1 - read -p "Name:" HOST_NAME - if [ -z "$HOST_NAME" ]; then - return 1 - else - read -p "FQDN:" HOST_FQDN - read -p "IP: " HOST_IP - while ! ip_valid "$HOST_IP" - do - echo "This is not a valid IP! Try again." - read -p "IP: " HOST_IP - done - fi - if confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " - name: $HOST_NAME" >> $FILE - echo " address: $HOST_IP" >> $FILE - echo " fqdn: $HOST_FQDN" >> $FILE - else - echo "Not confirmed" - fi - return 0 -} - -generate_dns_entry() { - FILE=$1 - PROMPT=$2 - read -p "${PROMPT}:" DNS_IP - if [ -z "$DNS_IP" ]; then - return 1 - else - while ! ip_valid "$DNS_IP" - do - echo "This is not a valid IP! Try again." - read -p "${PROMPT}: " DNS_IP - done - fi - if confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " - $DNS_IP" >> $FILE - else - echo "Not confirmed" - fi - return 0 -} - -confirm_yes() { - prompt=$1 - while true - do - read -p "$prompt" YESNO - case $YESNO in - [Yy]) - return 0 - ;; - [Nn]) - return 1 - ;; - esac - done -} - -generate_yaml_fragment() { - ENV=$1 - FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV - - if [ -f $FRAGMENT ]; then - echo "Manual configuration already performed, reusing previous data from $FRAGMENT." - echo "Press return to continue or ^C to stop." - read ans - return - fi - - echo "opnfv:" > ${FRAGMENT} - - clear - echo -e "\n\nPre-deployment configuration\n\n" - - echo -e "\n\nIPs for the DNS servers to go into /etc/resolv.conf. You will be" - echo -e "prompted for one IP at the time. Press return on an empty line" - echo -e "to complete your input. If no DNS server is specified, the IP of" - echo -e "the Fuel master will be used instead.\n" - - DNSCICYAML=${CONFIGDIR}/cicdns.yaml.$ENV - rm -f $DNSCICYAML - - echo -e "\n\n" - - while generate_dns_entry $DNSCICYAML "IP for CIC name servers" - do - : - done - - if [ -f $DNSCICYAML ]; then - echo " dns:" >> $FRAGMENT - echo " controller:" >> $FRAGMENT - cat $DNSCICYAML >> $FRAGMENT - fi - - - DNSCMPYAML=${CONFIGDIR}/cmpdns.yaml.$ENV - rm -f $DNSCMPYAML - - echo -e "\n\n" - - while generate_dns_entry $DNSCMPYAML "IP for compute node name servers" - do - : - done - - - if [ -f $DNSCMPYAML ]; then - if [ ! -f $DNSCICYAML ]; then - echo " dns:" >> $FRAGMENT - fi - echo " compute:" >> $FRAGMENT - cat $DNSCMPYAML >> $FRAGMENT - fi - - echo -e "\n\nHosts file additions for controllers and compute nodes. You will be" - echo -e "prompted for name, FQDN and IP for each entry. Press return when prompted" - echo -e "for a name when you have completed your input.\n" - - - HOSTYAML=${CONFIGDIR}/hosts.yaml.$ENV - rm -f $HOSTYAML - while generate_hostfile_entry $HOSTYAML - do - : - done - - if [ -f $HOSTYAML ]; then - echo " hosts:" >> $FRAGMENT - cat $HOSTYAML >> $FRAGMENT - fi - - echo -e "\n\nNTP upstream configuration for controllers.You will be" - echo -e "prompted for a NTP server each entry. Press return when prompted" - echo -e "for a NTP serverwhen you have completed your input.\n" - - - NTPYAML=${CONFIGDIR}/ntp.yaml.$ENV - rm -f $NTPYAML - while generate_ntp_entry $NTPYAML - do - : - done - - if [ -f $NTPYAML ]; then - echo " ntp:" >> $FRAGMENT - echo " controller: |" >> $FRAGMENT - cat $NTPYAML >> $FRAGMENT - - echo " compute: |" >> $FRAGMENT - for ctl in `find $CONFIGDIR/deployment_$ENV -name '*controller*.yaml'` - do - fqdn=`grep "^fqdn:" $ctl | sed 's/fqdn: *//'` - echo " server $fqdn" >> $FRAGMENT - done - fi - - # If nothing added make sure we get an empty opnfv hash - # instead of a NULL hash. - if [ $(wc -l $FRAGMENT | awk '{print $1}') -le 1 ]; then - echo "opnfv: {}" >$FRAGMENT - fi -} - -ENV=$(get_env "$@") - -CONFIGDIR="/var/lib/opnfv" -mkdir -p $CONFIGDIR - -get_deployment_info $ENV -# Uncomment the below to enable the control_bond example -#transform_yaml $ENV -get_provisioning_info $ENV -generate_yaml_fragment $ENV -# The feature to change hostnames from node-<n> to cmp- or cic- is disabled. -# To turn it on, uncomment the following line. -#setup_hostnames $ENV -add_yaml_fragment $ENV -commit_changes $ENV diff --git a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh b/fuel/build/f_isoroot/f_predeployment/sysinfo.sh deleted file mode 100755 index e99cac0..0000000 --- a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -dockerctl shell cobbler cobbler system list | grep -v default | xargs -n 1 host | sort | sed 's/\..* /\t/' diff --git a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py b/fuel/build/f_isoroot/f_predeployment/transform_yaml.py deleted file mode 100755 index 14eec4c..0000000 --- a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py +++ /dev/null @@ -1,68 +0,0 @@ -#!/usr/bin/python -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -# Remove control and management network transformations from file. -# Only to be used together with f_control_bond_example (enable in -# pre-deploy.sh) - -import yaml -import re -import sys -import os - -if len(sys.argv) != 2: - sys.stderr.write("Usage: "+sys.argv[0]+" <filename>\n") - sys.exit(1) - -filename = sys.argv[1] -if not os.path.exists(filename): - sys.stderr.write("ERROR: The file "+filename+" could not be opened\n") - sys.exit(1) - -ignore_values = [ "eth0", "eth1", "br-mgmt", "br-fw-admin" ] - -infile = open(filename, 'r') -doc = yaml.load(infile) -infile.close() - -out={} - -for scheme in doc: - if scheme == "network_scheme": - mytransformation = {} - for operation in doc[scheme]: - if operation == "transformations": - # We need the base bridges for l23network to be happy, - # remove everything else. - mytrans = [ { "action": "add-br", "name": "br-mgmt" }, - { "action": "add-br", "name": "br-fw-admin" } ] - for trans in doc[scheme][operation]: - delete = 0 - for ignore in ignore_values: - matchObj = re.search(ignore,str(trans)) - if matchObj: - delete = 1 - if delete == 0: - mytrans.append(trans) - else: - pass - #print "Deleted", trans - - mytransformation[operation] = mytrans - else: - mytransformation[operation] = doc[scheme][operation] - out[scheme] = mytransformation - else: - out[scheme] = doc[scheme] - -outfile = open(filename, 'w') -outfile.write(yaml.dump(out, default_flow_style=False)) -outfile.close() |