Starting point for ODL Integration

***CAN BE MERGED***
- ODL build and installation (puppet manifests) including needed dependencies
- Modified in accordance with Randy Levensalors comments
- Added chmod 4755 /bin/fusermount due to that lately some systems dont install fuseiso
  withe SUID set for fusermount. Investing ongoing on why and why not consistent.
- Rebased with master
- ODL disabled in top Make (enable it by uncommenting the odl dirs
- Removed white spaces
- Hopefully fixed an issue with the docker ubuntu repos, added --no-cache=true to the fuel/docker/Make file.

TODO:
- Refactor collecting ODL and Java dependencies to one common place
- Refactoring top Makefile
- Adding CI hooks for build and deploy
- Finishing integration plumbing wit Neutron/ML2 and OVS/OVSDB

Change-Id: I13dd4d3a72d099316dfaa9f7cd9140781be2397b
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>

19 files changed, 2029 insertions, 0 deletions

diff --git a/fuel/build/f_isoroot/Makefile b/fuel/build/f_isoroot/Makefile
new file mode 100644
index 0000000..2fdbbae
--- /dev/null
+++ b/fuel/build/f_isoroot/Makefile
@@ -0,0 +1,31 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+SUBDIRS = f_predeployment f_kscfg f_bootstrap
+SUBCLEAN = $(addsuffix .clean,$(SUBDIRS))
+
+.PHONY: all
+all:	$(SUBDIRS)
+
+.PHONY: $(SUBDIRS)
+$(SUBDIRS):
+	@mkdir -p release
+	$(MAKE) -C $@ -f Makefile release
+
+.PHONY: clean $(SUBCLEAN)
+clean: $(SUBCLEAN)
+	@rm -Rf release
+
+$(SUBCLEAN): %.clean:
+	$(MAKE) -C $* -f Makefile clean
+
+.PHONY: release
+release:clean $(SUBDIRS)
+	@cp -Rvp release/* ../release/isoroot
diff --git a/fuel/build/f_isoroot/README b/fuel/build/f_isoroot/README
new file mode 100644
index 0000000..eb54c08
--- /dev/null
+++ b/fuel/build/f_isoroot/README
@@ -0,0 +1,16 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This is to (a) replace/patch existing Fuel ISO files as well
+as adding new information directly into the ISO structure
+
+Please separate changes into "patches" and new content into
+"additions". Both directories will be anchored at the ISO file
+root.
diff --git a/fuel/build/f_isoroot/f_bootstrap/Makefile b/fuel/build/f_isoroot/f_bootstrap/Makefile
new file mode 100644
index 0000000..7404319
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/Makefile
@@ -0,0 +1,29 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+
+.PHONY: all
+all:
+	@mkdir -p release/opnfv/bootstrap/pre.d
+	@mkdir -p release/opnfv/bootstrap/post.d
+	@mkdir -p release/usr/local/sbin
+	@cp pre-scripts/* release/opnfv/bootstrap/pre.d
+	@cp post-scripts/* release/opnfv/bootstrap/post.d
+	@cp bootstrap_admin_node.sh release
+	@cp bootstrap_admin_node.sh.orig release
+
+.PHONY: clean
+clean:
+	@rm -rf release
+
+.PHONY: release
+release:all
+	@cp -Rvp release/* ../release
diff --git a/fuel/build/f_isoroot/f_bootstrap/README b/fuel/build/f_isoroot/f_bootstrap/README
new file mode 100644
index 0000000..5da954c
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/README
@@ -0,0 +1,24 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This function modifies the adds hooks to the beginning and end of
+/usr/local/sbin/bootstrap_admin_nodes.sh, which is run as the
+last post step from ks.cfg
+
+This enables other functions to place scripts into two directories
+run either at the beginning or the end of the bootstrap procedure:
+
+	/opt/opnfv/bootstrap/pre.d
+	/opt/opnfv/bootstrap/post.d
+
+These will be run in lexical order at pre or post.
+
+CI note: Using pre.d, it would be possible to "inject" a pre-defined
+astute.yaml for Fuel.
diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
new file mode 100755
index 0000000..348ce3c
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
@@ -0,0 +1,105 @@
+#!/bin/bash
+
+function countdown() {
+  local i
+  sleep 1
+  for ((i=$1-1; i>=1; i--)); do
+    printf '\b\b%02d' "$i"
+    sleep 1
+  done
+}
+
+function fail() {
+  echo "ERROR: Fuel node deployment FAILED! Check /var/log/puppet/bootstrap_admin_node.log for details" 1>&2
+  exit 1
+}
+# LANG variable is a workaround for puppet-3.4.2 bug. See LP#1312758 for details
+export LANG=en_US.UTF8
+showmenu="no"
+if [ -f /root/.showfuelmenu ]; then
+  . /root/.showfuelmenu
+fi
+
+echo -n "Applying default Fuel settings..."
+fuelmenu --save-only --iface=eth0
+echo "Done!"
+
+### OPNFV addition BEGIN
+shopt -s nullglob
+for script in /opt/opnfv/bootstrap/pre.d/*.sh
+do
+  echo "Pre script: $script" >> /root/pre.log 2>&1
+  $script >> /root/pre.log 2>&1
+done
+shopt -u nullglob
+### OPNFV addition END
+
+if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
+  fuelmenu
+  else
+  #Give user 15 seconds to enter fuelmenu or else continue
+  echo
+  echo -n "Press a key to enter Fuel Setup (or press ESC to skip)... 15"
+  countdown 15 & pid=$!
+  if ! read -s -n 1 -t 15 key; then
+    echo -e "\nSkipping Fuel Setup..."
+  else
+    { kill "$pid"; wait $!; } 2>/dev/null
+    case "$key" in
+      $'\e')  echo "Skipping Fuel Setup.."
+              echo -n "Applying default Fuel setings..."
+              fuelmenu --save-only --iface=eth0
+              echo "Done!"
+              ;;
+      *)      echo -e "\nEntering Fuel Setup..."
+              fuelmenu
+              ;;
+    esac
+  fi
+fi
+#Reread /etc/sysconfig/network to inform puppet of changes
+. /etc/sysconfig/network
+hostname "$HOSTNAME"
+
+### docker stuff
+images_dir="/var/www/nailgun/docker/images"
+
+# extract docker images
+mkdir -p $images_dir $sources_dir
+rm -f $images_dir/*tar
+pushd $images_dir &>/dev/null
+
+echo "Extracting and loading docker images. (This may take a while)"
+lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar
+popd &>/dev/null
+service docker start
+
+# load docker images
+for image in $images_dir/*tar ; do
+    echo "Loading docker image ${image}..."
+    docker load -i "$image"
+    # clean up extracted image
+    rm -f "$image"
+done
+
+# apply puppet
+puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
+if [ $? -ge 4 ];then
+  fail
+fi
+rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote
+
+dockerctl check || fail
+bash /etc/rc.local
+
+### OPNFV addition BEGIN
+shopt -s nullglob
+for script in /opt/opnfv/bootstrap/post.d/*.sh
+do
+  echo "Post script: $script" >> /root/post.log 2>&1
+  $script >> /root/post.log 2>&1
+done
+shopt -u nullglob
+### OPNFV addition END
+
+echo "Fuel node deployment complete!"
diff --git a/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
new file mode 100755
index 0000000..7b6e6bd
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
@@ -0,0 +1,84 @@
+#!/bin/bash
+
+function countdown() {
+  local i
+  sleep 1
+  for ((i=$1-1; i>=1; i--)); do
+    printf '\b\b%02d' "$i"
+    sleep 1
+  done
+}
+
+function fail() {
+  echo "ERROR: Fuel node deployment FAILED! Check /var/log/puppet/bootstrap_admin_node.log for details" 1>&2
+  exit 1
+}
+# LANG variable is a workaround for puppet-3.4.2 bug. See LP#1312758 for details
+export LANG=en_US.UTF8
+showmenu="no"
+if [ -f /root/.showfuelmenu ]; then
+  . /root/.showfuelmenu
+fi
+
+echo -n "Applying default Fuel settings..."
+fuelmenu --save-only --iface=eth0
+echo "Done!"
+
+if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
+  fuelmenu
+  else
+  #Give user 15 seconds to enter fuelmenu or else continue
+  echo
+  echo -n "Press a key to enter Fuel Setup (or press ESC to skip)... 15"
+  countdown 15 & pid=$!
+  if ! read -s -n 1 -t 15 key; then
+    echo -e "\nSkipping Fuel Setup..."
+  else
+    { kill "$pid"; wait $!; } 2>/dev/null
+    case "$key" in
+      $'\e')  echo "Skipping Fuel Setup.."
+              echo -n "Applying default Fuel setings..."
+              fuelmenu --save-only --iface=eth0
+              echo "Done!"
+              ;;
+      *)      echo -e "\nEntering Fuel Setup..."
+              fuelmenu
+              ;;
+    esac
+  fi
+fi
+#Reread /etc/sysconfig/network to inform puppet of changes
+. /etc/sysconfig/network
+hostname "$HOSTNAME"
+
+### docker stuff
+images_dir="/var/www/nailgun/docker/images"
+
+# extract docker images
+mkdir -p $images_dir $sources_dir
+rm -f $images_dir/*tar
+pushd $images_dir &>/dev/null
+
+echo "Extracting and loading docker images. (This may take a while)"
+lrzip -d -o fuel-images.tar fuel-images.tar.lrz && tar -xf fuel-images.tar && rm -f fuel-images.tar
+popd &>/dev/null
+service docker start
+
+# load docker images
+for image in $images_dir/*tar ; do
+    echo "Loading docker image ${image}..."
+    docker load -i "$image"
+    # clean up extracted image
+    rm -f "$image"
+done
+
+# apply puppet
+puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
+if [ $? -ge 4 ];then
+  fail
+fi
+rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote
+
+dockerctl check || fail
+bash /etc/rc.local
+echo "Fuel node deployment complete!"
diff --git a/fuel/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh b/fuel/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh
new file mode 100755
index 0000000..7ac8965
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh
@@ -0,0 +1,4 @@
+#/bin/sh
+date
+echo "This is an example file run at post-bootstrap."
+exit 0
diff --git a/fuel/build/f_isoroot/f_bootstrap/post-scripts/01_fix_iommubug.sh b/fuel/build/f_isoroot/f_bootstrap/post-scripts/01_fix_iommubug.sh
new file mode 100755
index 0000000..79aa31a
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/post-scripts/01_fix_iommubug.sh
@@ -0,0 +1,9 @@
+#/bin/sh
+echo "Setting intel_iommu=off in bootstrap profile - a fix for the Dell systems"
+echo "Old settings"
+dockerctl shell cobbler cobbler profile report --name bootstrap
+echo "Modifying"
+dockerctl shell cobbler cobbler profile edit --name bootstrap --kopts "intel_iommu=off" --in-place
+echo "New settings"
+dockerctl shell cobbler cobbler profile report --name bootstrap
+
diff --git a/fuel/build/f_isoroot/f_bootstrap/post-scripts/02_fix_console_speed.sh b/fuel/build/f_isoroot/f_bootstrap/post-scripts/02_fix_console_speed.sh
new file mode 100755
index 0000000..bf7591b
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/post-scripts/02_fix_console_speed.sh
@@ -0,0 +1,15 @@
+#/bin/sh
+echo "Changing console speed to 115200 (std is 9600) on bootstrap"
+echo "Old settings"
+dockerctl shell cobbler cobbler profile report --name bootstrap
+echo "Modifying"
+dockerctl shell cobbler cobbler profile edit --name bootstrap --kopts "console=tty0 console=ttyS0,115200" --in-place
+echo "New settings"
+dockerctl shell cobbler cobbler profile report --name bootstrap
+echo "Setting console speed to 115200 on ubuntu_1204_x86_64 (std is no serial console)"
+echo "Old settings"
+dockerctl shell cobbler cobbler profile report --name ubuntu_1204_x86_64
+echo "Modifying"
+dockerctl shell cobbler cobbler profile edit --name ubuntu_1204_x86_64 --kopts "console=tty0 console=ttyS0,115200" --in-place
+echo "New settings"
+dockerctl shell cobbler cobbler profile report --name ubuntu_1204_x86_64
diff --git a/fuel/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh b/fuel/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh
new file mode 100755
index 0000000..ac427bf
--- /dev/null
+++ b/fuel/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh
@@ -0,0 +1,4 @@
+#/bin/sh
+date
+echo "This is an example file run at pre-bootstrap."
+exit 0
diff --git a/fuel/build/f_isoroot/f_kscfg/Makefile b/fuel/build/f_isoroot/f_kscfg/Makefile
new file mode 100644
index 0000000..38305fd
--- /dev/null
+++ b/fuel/build/f_isoroot/f_kscfg/Makefile
@@ -0,0 +1,25 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+
+.PHONY: all
+all:
+	@mkdir -p release
+	@cp ks.cfg release
+	@cp ks.cfg.orig release
+
+.PHONY: clean
+clean:
+	@rm -rf release
+
+.PHONY: release
+release: all
+	@cp -Rvp release/* ../release
diff --git a/fuel/build/f_isoroot/f_kscfg/README b/fuel/build/f_isoroot/f_kscfg/README
new file mode 100644
index 0000000..c85efde
--- /dev/null
+++ b/fuel/build/f_isoroot/f_kscfg/README
@@ -0,0 +1,18 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This function modifies the ks.cfg of the Fuel master to
+make copy whatever is in the top level opnfv directory
+of the ISO (populated by, for example, f_configfrontend) to
+/opt/opnfv. In the end this is where the installation
+parts will evolve.
+
+This is also the place to force the installation to overwrite
+the disk (set forceformat="yes" instead of "no").
diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg b/fuel/build/f_isoroot/f_kscfg/ks.cfg
new file mode 100755
index 0000000..932e9ac
--- /dev/null
+++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg
@@ -0,0 +1,572 @@
+install
+text
+%include /tmp/source.ks
+reboot --eject
+lang en_US.UTF-8
+keyboard us
+rootpw r00tme
+timezone --utc Etc/UTC
+firewall --disabled
+selinux --disabled
+# ignore unsupported hardware warning
+unsupported_hardware
+# SKIP CONFIGURING X
+skipx
+# NEVER ever place zerombr here, it breaks automated installation
+%include /tmp/bootloader.ks
+%include /tmp/partition.ks
+
+# PREINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE
+# INSTALLATION PROCESS ITSELF
+%pre
+#!/bin/sh
+
+# hard drives
+drives=""
+removable_drives=""
+for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
+    if (grep -q 0 /sys/block/${drv}/removable); then
+        drives="${drives} ${drv}"
+    else
+        removable_drives="${removable_drives} ${drv}"
+    fi
+done
+default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
+
+installdrive="undefined"
+forceformat="no"
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+set ${drives} ${removable_drives}
+numdrives=`echo $#`
+
+tgtdrive="${installdrive}"
+
+function confirm_format {
+  check_drive="$1"
+  local confirm_format="no"
+
+  if [[ "$forceformat" == "yes" ]] ; then
+    return 0
+  fi
+
+  if parted -s /dev/$check_drive print &>/dev/null ; then
+    echo
+    echo "$check_drive drive contains partition table:"
+    parted -s /dev/$check_drive print
+    echo
+    read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format
+    if [[ "$confirm_format" == "y" ]] || [[ "$confirm_format" == "Y" ]] || [[ "$forceformat" == "yes" ]]; then
+      return 0
+    else
+      return 1
+    fi
+  else
+    return 0
+  fi
+}
+
+format_confirmed="no"
+
+if [ $numdrives -lt 1 ]; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    clear
+    echo
+    echo '********************************************************************'
+    echo '*                            E R R O R                             *'
+    echo '*                                                                  *'
+    echo '*      There is no suitable media available for installation.      *'
+    echo '*                Please attach a drive and try again.              *'
+    echo '*                                                                  *'
+    echo '********************************************************************'
+    echo
+    read -p "Press Enter to shut down the system: " _
+    poweroff
+fi
+
+if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    while [ "${tgtdrive}" = "undefined" ]; do
+        clear
+        echo
+        echo '********************************************************************************'
+        echo '*                                 W A R N I N G                                *'
+        echo '*                                                                              *'
+        echo '*  Which of the detected hard drives do you want to be used as                 *'
+        echo '*  the installation target?                                                    *'
+        echo '*                                                                              *'
+        echo '********************************************************************************'
+        echo
+        echo "Possible choices"
+        echo "Persistent drives: ${drives}"
+        echo "Removable drives: ${removable_drives}"
+        echo
+        if [ `echo ${drives} | wc -w` -eq 1 ] ; then
+            read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive
+        else
+            read -p "Choose hard drive: " tgtdrive
+        fi
+        match="no"
+        for drive in ${drives[@]} ${removable_drives[@]}; do
+          if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then
+            if confirm_format $tgtdrive ; then
+              format_confirmed="yes"
+              break
+            else
+              tgtdrive="undefined"
+              read -p "You may select another disk. Press Enter to continue." _
+            fi
+          fi
+        done
+        if [[ "$match" == "no" ]]; then
+          tgtdrive="undefined"
+          read -p "Invalid choice. Press Enter to continue." _
+        fi
+    done
+    clear
+    chvt 1
+else
+    tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"`
+fi
+
+if [ "$format_confirmed" != "yes" ] ; then
+  exec < /dev/tty3 > /dev/tty3 2>&1
+  chvt 3
+  if ! confirm_format $tgtdrive ; then
+      clear
+      echo
+      echo '********************************************************************'
+      echo '*                            E R R O R                             *'
+      echo '*                                                                  *'
+      echo '*           Disk $tgtdrive contains active partition(s).           *'
+      echo '*        Installation cannot continue without confirmation.        *'
+      echo '*                                                                  *'
+      echo '********************************************************************'
+      echo
+      read -p "Press Enter to restart: " _
+      reboot
+  fi
+  chvt 1
+fi
+
+# verify tgtdrive is at least 30GB
+tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
+if [ $tgtdrivesize -lt 30720 ]; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    clear
+    echo
+    echo '********************************************************************'
+    echo '*                            E R R O R                             *'
+    echo '*                                                                  *'
+    echo '*  Your disk is under 30GB in size. Installation cannot continue.  *'
+    echo '*             Restart installation with a larger disk.             *'
+    echo '*                                                                  *'
+    echo '********************************************************************'
+    echo
+    read -p "Press Enter to restart: " _
+    reboot
+fi
+
+# paths in /dev have "/" instead of "!" for cciss devices
+tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
+
+# source
+if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+    echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
+else
+    echo "cdrom" > /tmp/source.ks
+fi
+
+vgremove -ff os
+dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10
+sleep 3
+hdparm -z /dev/${tgtdrive}
+parted -s /dev/${tgtdrive} mklabel gpt
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24
+parted -s /dev/${tgtdrive} set 1 bios_grub on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224
+parted -s /dev/${tgtdrive} set 2 boot on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424
+sleep 3
+hdparm -z /dev/${tgtdrive}
+
+# partition
+
+# This adds support for the p seperator required for cciss devices
+if echo ${tgtdrive} | grep -q -e cciss ; then
+    bootdev=${tgtdrive}p
+else
+    bootdev=${tgtdrive}
+fi
+echo > /tmp/partition.ks
+echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks
+echo "volgroup os pv.001" >> /tmp/partition.ks
+echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
+echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=1 --grow --name=var --fstype=xfs" >> /tmp/partition.ks
+
+# bootloader
+echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+
+# Anaconda can not install grub 0.97 on disks which are >4T.
+# The reason is that grub does not support such large geometries
+# and it simply thinks that the cylinder number has negative value.
+# Here we just set geometry manually so that grub thinks that disk
+# size is equal to 1G.
+# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G
+echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks
+echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks
+
+%end
+
+%packages --nobase --excludedocs
+@Core
+authconfig
+bind-utils
+cronie
+crontabs
+curl
+daemonize
+dhcp
+docker-io
+fuelmenu
+gdisk
+lrzip
+lsof
+man
+mlocate
+nmap-ncat
+ntp
+openssh-clients
+policycoreutils
+rsync
+ruby21-puppet
+ruby21-rubygem-netaddr
+ruby21-rubygem-openstack
+selinux-policy-targeted
+strace
+subscription-manager
+sysstat
+system-config-firewall-base
+tcpdump
+telnet
+vim-enhanced
+virt-what
+wget
+yum
+
+%include /tmp/post_partition.ks
+
+# POSTINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER
+# INSTALLATION ITSELF COMPLETED
+%post
+echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules
+chmod +x /etc/rc.modules
+echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf
+mkdir -p /var/log/coredump
+echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf
+chmod 777 /var/log/coredump
+echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf
+
+# Mount installation media in chroot
+%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
+#!/bin/sh
+
+SOURCE="/mnt/sysimage/tmp/source"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+mkdir -p "${SOURCE}"
+
+case "${repo}" in
+  nfs:*)
+    nfs_url="${repo#nfs:}"
+    mount -t nfs "${nfs_url}" "${SOURCE}"
+  ;;
+  *)
+    if [ -d "/mnt/source" ]; then
+      mount -o bind "/mnt/source" "${SOURCE}"
+    fi
+  ;;
+esac
+
+%post --log=/root/anaconda-post-after-chroot.log
+#!/bin/bash
+
+set -x
+
+function save_cfg {
+    scrFile="/etc/sysconfig/network-scripts/ifcfg-$device"
+    search="domain $domain\nsearch $domain"
+    sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network
+    grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts
+    echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf
+    [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf
+    [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream
+    [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf
+    [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream
+
+    echo DEVICE=$device > $scrFile
+    echo ONBOOT=yes >> $scrFile
+    echo NM_CONTROLLED=no >> $scrFile
+    echo HWADDR=$hwaddr >> $scrFile
+    echo USERCTL=no >> $scrFile
+    echo PEERDNS=no >> $scrFile
+    if [ $ip ]; then
+        echo BOOTPROTO=static >> $scrFile
+        echo IPADDR=$ip >> $scrFile
+        echo NETMASK=$netmask >> $scrFile
+    else
+        echo BOOTPROTO=dhcp >> $scrFile
+    fi
+    scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface"
+    #Ignore gateway and set up DHCP if it is used, otherwise apply it
+    if [ $dhcp_interface ] && [ "$dhcp_interface" != "$device" ]; then
+        echo "DEVICE=$dhcp_interface" > $scrDHCPFile
+        echo "BOOTPROTO=dhcp" >> $scrDHCPFile
+        echo "ONBOOT=yes" >> $scrDHCPFile
+        echo "USERCTL=no" >> $scrDHCPFile
+    else
+        echo GATEWAY=$gw >> /etc/sysconfig/network
+    fi
+}
+
+# Default FQDN
+hostname="nailgun.mirantis.com"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+hostname=$hostname
+domain=${hostname#*.}
+ip=$ip
+netmask=$netmask
+gw=$gw
+device="eth0"
+hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
+dhcp_interface=$dhcp_interface
+save_cfg
+
+# Mounting installation source
+SOURCE=/tmp/source
+FS=/tmp/fs
+
+echo
+mkdir -p ${SOURCE}
+mkdir -p ${FS}
+
+if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+    mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
+    mount -o loop ${FS}/nailgun.iso ${SOURCE}
+fi
+
+OPENSTACK_VERSION=`cat ${SOURCE}/openstack_version`
+
+# ----------------------
+# UNPACKING REPOSITORIES
+# ----------------------
+
+wwwdir="/var/www/nailgun"
+repodir="${wwwdir}/${OPENSTACK_VERSION}"
+
+# Copying Centos files
+mkdir -p ${repodir}/centos/x86_64
+cp -r ${SOURCE}/images ${repodir}/centos/x86_64
+cp -r ${SOURCE}/isolinux ${repodir}/centos/x86_64
+cp -r ${SOURCE}/repodata ${repodir}/centos/x86_64
+cp -r ${SOURCE}/Packages ${repodir}/centos/x86_64
+cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
+
+# Copying Ubuntu files
+mkdir -p ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images
+
+# make links for backward compatibility
+ln -s ${repodir}/centos ${wwwdir}/centos
+ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
+
+# Copying bootstrap image
+mkdir -p ${wwwdir}/bootstrap
+cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap
+cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap
+
+# Copying target images
+cp -r ${SOURCE}/targetimages ${wwwdir}
+
+mkdir -p /root/.ssh
+chmod 700 /root/.ssh
+cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh
+chmod 600 /root/.ssh/bootstrap.rsa
+
+# --------------------------
+# UNPACKING PUPPET MANIFESTS
+# --------------------------
+
+# create folders
+mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+rm -rf /etc/puppet/modules/
+
+# TODO(ikalnitsky): investigate why we need this
+cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+
+# place modules and manifests
+tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
+
+# make links for backward compatibility
+pushd /etc/puppet
+ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+popd
+
+cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
+mkdir -p /var/lib/hiera
+touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
+
+# Deploy docker images and ctl tools if we built ISO with docker containers support
+[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker
+
+# Prepare local repository specification
+rm /etc/yum.repos.d/CentOS*.repo
+cat > /etc/yum.repos.d/nailgun.repo << EOF
+[nailgun]
+name=Nailgun Local Repo
+baseurl=file:/var/www/nailgun/${OPENSTACK_VERSION}/centos/x86_64
+gpgcheck=0
+EOF
+
+# Disable subscription-manager plugins
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || :
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || :
+
+# Disable GSSAPI in ssh server config
+sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+
+# Copying bootstrap_admin_node.sh, chmod it and
+# adding /etc/init/bootstrap_admin_node.conf
+cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
+chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh
+cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf
+echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node
+
+# Copying version.yaml file. It contains COMMIT_SHA of last commit.
+RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml)
+mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions
+cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml
+ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat  ${SOURCE}/openstack_version`.yaml
+
+# Generete Fuel UUID
+uuidgen > /etc/fuel/fuel-uuid
+
+###Run fuel menu
+[ -z "$showmenu" ] && showmenu="no"
+cat > /root/.showfuelmenu << EOF
+#Set to yes to run Fuel Setup
+#Set to no to accept default settings
+showmenu=$showmenu
+EOF
+
+# Prepare custom /etc/issue logon banner and script for changing IP in it
+cat > /etc/issue << EOF
+#########################################
+#       Welcome to the Fuel server      #
+#########################################
+Server is running on \m platform
+
+Fuel UI is available on:
+http://:8000
+
+Default administrator login:    root
+Default administrator password: r00tme
+
+Default Fuel UI login: admin
+Default Fuel UI password: admin
+
+Please change root password on first login.
+
+EOF
+
+
+cat >> '/etc/rc.local' << EOF
+first=yes
+for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do
+if [ "\$first" = "yes" ]; then
+  ipstr="Fuel UI is available on: http://\$ip:8000"
+  first=no
+else
+  ipstr=\$(printf "%s\n%25s%s" "\$ipstr" " " "http://\$ip:8000")
+fi
+done
+tmpissue=\$(mktemp)
+while read -r line; do
+  if [[ "\$line" =~ "Fuel UI is available on" ]]; then
+    echo -e "\$ipstr" >> \$tmpissue
+  elif [[ "\$line" =~ :8000$ ]]; then
+    :
+  else
+    echo -e "\$line" >> \$tmpissue
+  fi
+done < /etc/issue
+mv "\$tmpissue" /etc/issue
+
+EOF
+
+######### OPNFV addition BEGIN ############
+# Copy data into /opt/opnfv
+# TODO: This ought to be a package instead!
+mkdir -p /opt/opnfv
+cp -r ${SOURCE}/opnfv /opt
+######### OPNFV addition END ############
+
+# Unmounting source
+umount -f ${SOURCE}
+rm -rf ${SOURCE}
+
+umount -f ${FS} || true
+rm -rf ${FS}
+
+# Enabling/configuring NTPD and ntpdate services
+echo "server 127.127.1.0"            >> /etc/ntp.conf
+echo "fudge  127.127.1.0 stratum 10" >> /etc/ntp.conf
+echo "tos    orphan 7"               >> /etc/ntp.conf
+
+# Do not show error message on ntpdate failure. Customers should not be confused
+# if admin node does not have access to the internet time servers.
+sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/'
+
+# Disabling splash
+sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf
+sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf
+
+# Disabling console clearing
+sed -i 's/getty/getty --noclear/' /etc/init/tty.conf
+
+# Disabling starting first console from start-ttys service
+sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init
+
+# Copying default bash settings to the root directory
+cp -f /etc/skel/.bash* /root/
+
+# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors
+[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf
+
+%end
diff --git a/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig
new file mode 100644
index 0000000..44f9f42
--- /dev/null
+++ b/fuel/build/f_isoroot/f_kscfg/ks.cfg.orig
@@ -0,0 +1,566 @@
+install
+text
+%include /tmp/source.ks
+reboot --eject
+lang en_US.UTF-8
+keyboard us
+rootpw r00tme
+timezone --utc Etc/UTC
+firewall --disabled
+selinux --disabled
+# ignore unsupported hardware warning
+unsupported_hardware
+# SKIP CONFIGURING X
+skipx
+# NEVER ever place zerombr here, it breaks automated installation
+%include /tmp/bootloader.ks
+%include /tmp/partition.ks
+
+# PREINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE
+# INSTALLATION PROCESS ITSELF
+%pre
+#!/bin/sh
+
+# hard drives
+drives=""
+removable_drives=""
+for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
+    if (grep -q 0 /sys/block/${drv}/removable); then
+        drives="${drives} ${drv}"
+    else
+        removable_drives="${removable_drives} ${drv}"
+    fi
+done
+default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
+
+installdrive="undefined"
+forceformat="no"
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+set ${drives} ${removable_drives}
+numdrives=`echo $#`
+
+tgtdrive="${installdrive}"
+
+function confirm_format {
+  check_drive="$1"
+  local confirm_format="no"
+
+  if [[ "$forceformat" == "yes" ]] ; then
+    return 0
+  fi
+
+  if parted -s /dev/$check_drive print &>/dev/null ; then
+    echo
+    echo "$check_drive drive contains partition table:"
+    parted -s /dev/$check_drive print
+    echo
+    read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format
+    if [[ "$confirm_format" == "y" ]] || [[ "$confirm_format" == "Y" ]] || [[ "$forceformat" == "yes" ]]; then
+      return 0
+    else
+      return 1
+    fi
+  else
+    return 0
+  fi
+}
+
+format_confirmed="no"
+
+if [ $numdrives -lt 1 ]; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    clear
+    echo
+    echo '********************************************************************'
+    echo '*                            E R R O R                             *'
+    echo '*                                                                  *'
+    echo '*      There is no suitable media available for installation.      *'
+    echo '*                Please attach a drive and try again.              *'
+    echo '*                                                                  *'
+    echo '********************************************************************'
+    echo
+    read -p "Press Enter to shut down the system: " _
+    poweroff
+fi
+
+if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    while [ "${tgtdrive}" = "undefined" ]; do
+        clear
+        echo
+        echo '********************************************************************************'
+        echo '*                                 W A R N I N G                                *'
+        echo '*                                                                              *'
+        echo '*  Which of the detected hard drives do you want to be used as                 *'
+        echo '*  the installation target?                                                    *'
+        echo '*                                                                              *'
+        echo '********************************************************************************'
+        echo
+        echo "Possible choices"
+        echo "Persistent drives: ${drives}"
+        echo "Removable drives: ${removable_drives}"
+        echo
+        if [ `echo ${drives} | wc -w` -eq 1 ] ; then
+            read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive
+        else
+            read -p "Choose hard drive: " tgtdrive
+        fi
+        match="no"
+        for drive in ${drives[@]} ${removable_drives[@]}; do
+          if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then
+            if confirm_format $tgtdrive ; then
+              format_confirmed="yes"
+              break
+            else
+              tgtdrive="undefined"
+              read -p "You may select another disk. Press Enter to continue." _
+            fi
+          fi
+        done
+        if [[ "$match" == "no" ]]; then
+          tgtdrive="undefined"
+          read -p "Invalid choice. Press Enter to continue." _
+        fi
+    done
+    clear
+    chvt 1
+else
+    tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"`
+fi
+
+if [ "$format_confirmed" != "yes" ] ; then
+  exec < /dev/tty3 > /dev/tty3 2>&1
+  chvt 3
+  if ! confirm_format $tgtdrive ; then
+      clear
+      echo
+      echo '********************************************************************'
+      echo '*                            E R R O R                             *'
+      echo '*                                                                  *'
+      echo '*           Disk $tgtdrive contains active partition(s).           *'
+      echo '*        Installation cannot continue without confirmation.        *'
+      echo '*                                                                  *'
+      echo '********************************************************************'
+      echo
+      read -p "Press Enter to restart: " _
+      reboot
+  fi
+  chvt 1
+fi
+
+# verify tgtdrive is at least 30GB
+tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
+if [ $tgtdrivesize -lt 30720 ]; then
+    exec < /dev/tty3 > /dev/tty3 2>&1
+    chvt 3
+    clear
+    echo
+    echo '********************************************************************'
+    echo '*                            E R R O R                             *'
+    echo '*                                                                  *'
+    echo '*  Your disk is under 30GB in size. Installation cannot continue.  *'
+    echo '*             Restart installation with a larger disk.             *'
+    echo '*                                                                  *'
+    echo '********************************************************************'
+    echo
+    read -p "Press Enter to restart: " _
+    reboot
+fi
+
+# paths in /dev have "/" instead of "!" for cciss devices
+tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
+
+# source
+if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+    echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
+else
+    echo "cdrom" > /tmp/source.ks
+fi
+
+vgremove -ff os
+dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10
+sleep 3
+hdparm -z /dev/${tgtdrive}
+parted -s /dev/${tgtdrive} mklabel gpt
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24
+parted -s /dev/${tgtdrive} set 1 bios_grub on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224
+parted -s /dev/${tgtdrive} set 2 boot on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424
+sleep 3
+hdparm -z /dev/${tgtdrive}
+
+# partition
+
+# This adds support for the p seperator required for cciss devices
+if echo ${tgtdrive} | grep -q -e cciss ; then
+    bootdev=${tgtdrive}p
+else
+    bootdev=${tgtdrive}
+fi
+echo > /tmp/partition.ks
+echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks
+echo "volgroup os pv.001" >> /tmp/partition.ks
+echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
+echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=1 --grow --name=var --fstype=xfs" >> /tmp/partition.ks
+
+# bootloader
+echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+
+# Anaconda can not install grub 0.97 on disks which are >4T.
+# The reason is that grub does not support such large geometries
+# and it simply thinks that the cylinder number has negative value.
+# Here we just set geometry manually so that grub thinks that disk
+# size is equal to 1G.
+# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G
+echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks
+echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks
+
+%end
+
+%packages --nobase --excludedocs
+@Core
+authconfig
+bind-utils
+cronie
+crontabs
+curl
+daemonize
+dhcp
+docker-io
+fuelmenu
+gdisk
+lrzip
+lsof
+man
+mlocate
+nmap-ncat
+ntp
+openssh-clients
+policycoreutils
+rsync
+ruby21-puppet
+ruby21-rubygem-netaddr
+ruby21-rubygem-openstack
+selinux-policy-targeted
+strace
+subscription-manager
+sysstat
+system-config-firewall-base
+tcpdump
+telnet
+vim-enhanced
+virt-what
+wget
+yum
+
+%include /tmp/post_partition.ks
+
+# POSTINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER
+# INSTALLATION ITSELF COMPLETED
+%post
+echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules
+chmod +x /etc/rc.modules
+echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf
+mkdir -p /var/log/coredump
+echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf
+chmod 777 /var/log/coredump
+echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf
+
+# Mount installation media in chroot
+%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
+#!/bin/sh
+
+SOURCE="/mnt/sysimage/tmp/source"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+mkdir -p "${SOURCE}"
+
+case "${repo}" in
+  nfs:*)
+    nfs_url="${repo#nfs:}"
+    mount -t nfs "${nfs_url}" "${SOURCE}"
+  ;;
+  *)
+    if [ -d "/mnt/source" ]; then
+      mount -o bind "/mnt/source" "${SOURCE}"
+    fi
+  ;;
+esac
+
+%post --log=/root/anaconda-post-after-chroot.log
+#!/bin/bash
+
+set -x
+
+function save_cfg {
+    scrFile="/etc/sysconfig/network-scripts/ifcfg-$device"
+    search="domain $domain\nsearch $domain"
+    sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network
+    grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts
+    echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf
+    [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf
+    [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream
+    [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf
+    [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream
+
+    echo DEVICE=$device > $scrFile
+    echo ONBOOT=yes >> $scrFile
+    echo NM_CONTROLLED=no >> $scrFile
+    echo HWADDR=$hwaddr >> $scrFile
+    echo USERCTL=no >> $scrFile
+    echo PEERDNS=no >> $scrFile
+    if [ $ip ]; then
+        echo BOOTPROTO=static >> $scrFile
+        echo IPADDR=$ip >> $scrFile
+        echo NETMASK=$netmask >> $scrFile
+    else
+        echo BOOTPROTO=dhcp >> $scrFile
+    fi
+    scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface"
+    #Ignore gateway and set up DHCP if it is used, otherwise apply it
+    if [ $dhcp_interface ] && [ "$dhcp_interface" != "$device" ]; then
+        echo "DEVICE=$dhcp_interface" > $scrDHCPFile
+        echo "BOOTPROTO=dhcp" >> $scrDHCPFile
+        echo "ONBOOT=yes" >> $scrDHCPFile
+        echo "USERCTL=no" >> $scrDHCPFile
+    else
+        echo GATEWAY=$gw >> /etc/sysconfig/network
+    fi
+}
+
+# Default FQDN
+hostname="nailgun.mirantis.com"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+hostname=$hostname
+domain=${hostname#*.}
+ip=$ip
+netmask=$netmask
+gw=$gw
+device="eth0"
+hwaddr=`ifconfig $device | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
+dhcp_interface=$dhcp_interface
+save_cfg
+
+# Mounting installation source
+SOURCE=/tmp/source
+FS=/tmp/fs
+
+echo
+mkdir -p ${SOURCE}
+mkdir -p ${FS}
+
+if test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+    mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
+    mount -o loop ${FS}/nailgun.iso ${SOURCE}
+fi
+
+OPENSTACK_VERSION=`cat ${SOURCE}/openstack_version`
+
+# ----------------------
+# UNPACKING REPOSITORIES
+# ----------------------
+
+wwwdir="/var/www/nailgun"
+repodir="${wwwdir}/${OPENSTACK_VERSION}"
+
+# Copying Centos files
+mkdir -p ${repodir}/centos/x86_64
+cp -r ${SOURCE}/images ${repodir}/centos/x86_64
+cp -r ${SOURCE}/isolinux ${repodir}/centos/x86_64
+cp -r ${SOURCE}/repodata ${repodir}/centos/x86_64
+cp -r ${SOURCE}/Packages ${repodir}/centos/x86_64
+cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
+
+# Copying Ubuntu files
+mkdir -p ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/conf ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/db ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/indices ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/linux ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/installer-amd64/current/images/netboot/ubuntu-installer/amd64/initrd.gz ${repodir}/ubuntu/x86_64/images
+
+# make links for backward compatibility
+ln -s ${repodir}/centos ${wwwdir}/centos
+ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
+
+# Copying bootstrap image
+mkdir -p ${wwwdir}/bootstrap
+cp -r ${SOURCE}/bootstrap/initramfs.img ${wwwdir}/bootstrap
+cp -r ${SOURCE}/bootstrap/linux ${wwwdir}/bootstrap
+
+# Copying target images
+cp -r ${SOURCE}/targetimages ${wwwdir}
+
+mkdir -p /root/.ssh
+chmod 700 /root/.ssh
+cp ${SOURCE}/bootstrap/bootstrap.rsa /root/.ssh
+chmod 600 /root/.ssh/bootstrap.rsa
+
+# --------------------------
+# UNPACKING PUPPET MANIFESTS
+# --------------------------
+
+# create folders
+mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+rm -rf /etc/puppet/modules/
+
+# TODO(ikalnitsky): investigate why we need this
+cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+
+# place modules and manifests
+tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
+
+# make links for backward compatibility
+pushd /etc/puppet
+ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+popd
+
+cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
+mkdir -p /var/lib/hiera
+touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
+
+# Deploy docker images and ctl tools if we built ISO with docker containers support
+[ -d "${SOURCE}/docker" ] && cp -r ${SOURCE}/docker ${wwwdir}/docker
+
+# Prepare local repository specification
+rm /etc/yum.repos.d/CentOS*.repo
+cat > /etc/yum.repos.d/nailgun.repo << EOF
+[nailgun]
+name=Nailgun Local Repo
+baseurl=file:/var/www/nailgun/${OPENSTACK_VERSION}/centos/x86_64
+gpgcheck=0
+EOF
+
+# Disable subscription-manager plugins
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || :
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || :
+
+# Disable GSSAPI in ssh server config
+sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+
+# Copying bootstrap_admin_node.sh, chmod it and
+# adding /etc/init/bootstrap_admin_node.conf
+cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
+chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh
+cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf
+echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node
+
+# Copying version.yaml file. It contains COMMIT_SHA of last commit.
+RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml)
+mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions
+cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml
+ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat  ${SOURCE}/openstack_version`.yaml
+
+# Generete Fuel UUID
+uuidgen > /etc/fuel/fuel-uuid
+
+###Run fuel menu
+[ -z "$showmenu" ] && showmenu="no"
+cat > /root/.showfuelmenu << EOF
+#Set to yes to run Fuel Setup
+#Set to no to accept default settings
+showmenu=$showmenu
+EOF
+
+# Prepare custom /etc/issue logon banner and script for changing IP in it
+cat > /etc/issue << EOF
+#########################################
+#       Welcome to the Fuel server      #
+#########################################
+Server is running on \m platform
+
+Fuel UI is available on:
+http://:8000
+
+Default administrator login:    root
+Default administrator password: r00tme
+
+Default Fuel UI login: admin
+Default Fuel UI password: admin
+
+Please change root password on first login.
+
+EOF
+
+
+cat >> '/etc/rc.local' << EOF
+first=yes
+for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do
+if [ "\$first" = "yes" ]; then
+  ipstr="Fuel UI is available on: http://\$ip:8000"
+  first=no
+else
+  ipstr=\$(printf "%s\n%25s%s" "\$ipstr" " " "http://\$ip:8000")
+fi
+done
+tmpissue=\$(mktemp)
+while read -r line; do
+  if [[ "\$line" =~ "Fuel UI is available on" ]]; then
+    echo -e "\$ipstr" >> \$tmpissue
+  elif [[ "\$line" =~ :8000$ ]]; then
+    :
+  else
+    echo -e "\$line" >> \$tmpissue
+  fi
+done < /etc/issue
+mv "\$tmpissue" /etc/issue
+
+EOF
+
+
+# Unmounting source
+umount -f ${SOURCE}
+rm -rf ${SOURCE}
+
+umount -f ${FS} || true
+rm -rf ${FS}
+
+# Enabling/configuring NTPD and ntpdate services
+echo "server 127.127.1.0"            >> /etc/ntp.conf
+echo "fudge  127.127.1.0 stratum 10" >> /etc/ntp.conf
+echo "tos    orphan 7"               >> /etc/ntp.conf
+
+# Do not show error message on ntpdate failure. Customers should not be confused
+# if admin node does not have access to the internet time servers.
+sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/'
+
+# Disabling splash
+sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf
+sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf
+
+# Disabling console clearing
+sed -i 's/getty/getty --noclear/' /etc/init/tty.conf
+
+# Disabling starting first console from start-ttys service
+sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init
+
+# Copying default bash settings to the root directory
+cp -f /etc/skel/.bash* /root/
+
+# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors
+[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf
+
+%end
\ No newline at end of file
diff --git a/fuel/build/f_isoroot/f_predeployment/Makefile b/fuel/build/f_isoroot/f_predeployment/Makefile
new file mode 100644
index 0000000..a5252df
--- /dev/null
+++ b/fuel/build/f_isoroot/f_predeployment/Makefile
@@ -0,0 +1,28 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+
+.PHONY: all
+all:
+	@mkdir -p release/opnfv
+	@cp pre-deploy.sh release/opnfv
+	@cp sysinfo.sh release/opnfv
+	@cp transform_yaml.py release/opnfv
+	@chmod 755 release/opnfv/*
+
+.PHONY: clean
+clean:
+	@rm -rf release
+
+
+.PHONY: release
+release:clean all
+	@cp -Rvp release/* ../release
diff --git a/fuel/build/f_isoroot/f_predeployment/README b/fuel/build/f_isoroot/f_predeployment/README
new file mode 100644
index 0000000..3eef9f2
--- /dev/null
+++ b/fuel/build/f_isoroot/f_predeployment/README
@@ -0,0 +1,18 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This is the start of the interactive frontend that will add OPNFV configuration into
+the astute.yaml of the nodes. Currently just a test setup - prepare an installation
+up to the point of "deploy changes", but run "./pre-deploy.sh <envid> fragment.yaml"
+before actually hitting deploy, which will make sure to add the example fragment to
+the nodes.
+
+Note that the only part of the fragment.yaml that actually is acted on is the hosts
+part at this time.
diff --git a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh b/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh
new file mode 100755
index 0000000..c5c6c42
--- /dev/null
+++ b/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh
@@ -0,0 +1,401 @@
+#!/bin/bash -e
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+
+error_exit () {
+    echo "$@" >&2
+    exit 1
+}
+
+get_env() {
+   local env_id=${1:-""}
+
+   if [ -z $env_id ]; then
+      local n_envs=$(fuel env --list | grep -v -E "^id|^--|^ *$" | wc -l)
+      if [ $n_envs -ne 1 ]; then
+          echo "Usage: $0 [<env-id>]" >&2
+          error_exit "If only a single environment is present it can be left" \
+                     "out. Otherwise the environment must be selected"
+      fi
+      env_id=$(fuel env --list | grep -v -E "^id|^--" | awk '{print $1}')
+   else
+      if ! fuel --env $env_id environment 2>/dev/null grep -v -E "^id|^--" | \
+           grep -q ^$env_id; then
+         error_exit "No such environment ID: $env_id"
+      fi
+   fi
+   echo $env_id
+}
+
+get_node_uid () {
+    cat $1 | grep "^uid: " | sed "s/^uid: '//" | sed "s/'$//"
+}
+
+get_node_role () {
+    cat $1 | grep "^role: " | sed "s/^role: //"
+}
+
+get_next_cic () {
+    file=$1
+
+    last=`cat $file | sed 's/.*://' | grep "cic-" | sed 's/cic\-.*sl//' | sort -n | tail -1`
+    if [ -z "$last" ]; then
+        next=1
+    else
+        next=$[$last + 2]
+    fi
+    echo $next
+}
+
+get_next_compute () {
+    file=$1
+
+    last=`cat $file | sed 's/.*://' | grep "cmp-" | sed 's/cmp\-.*sl//' | sort -n | tail -1`
+    if [ -z "$last" ]; then
+        next=7
+    else
+        next=$[$last + 2]
+    fi
+    echo $next
+}
+
+modify_hostnames () {
+    env=$1
+    file=$2
+    for line in `cat $file`
+    do
+        old=`echo $line | sed 's/:.*//'`
+        new=`echo $line | sed 's/.*://'`
+        echo "Applying: $old -> $new"
+
+        for dfile in deployment_$env/*.yaml
+        do
+            sed -i "s/$old/$new/g" $dfile
+        done
+
+        for pfile in provisioning_$env/*.yaml
+        do
+            sed -i "s/$old/$new/g" $pfile
+        done
+    done
+}
+
+setup_hostnames () {
+    ENV=$1
+    cd ${CONFIGDIR}
+    touch hostnames.$ENV
+
+    for dfile in deployment_$ENV/*.yaml
+    do
+        uid=`get_node_uid $dfile`
+        hostname=`grep "^node-$uid:" hostnames.$ENV | sed 's/.*://'`
+        if [ -z $hostname ]; then
+
+            pfile=provisioning_$ENV/node-$uid.yaml
+            role=`get_node_role $dfile`
+
+            case $role in
+                primary-controller)
+                    hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`"
+                    ;;
+                controller)
+                    hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`"
+                    ;;
+                compute)
+                    hostname="cmp-pod0-sh0-sl`get_next_compute hostnames.$ENV`"
+                    ;;
+                *)
+                    echo "Unknown node type for UID $uid"
+                    exit 1
+                    ;;
+            esac
+
+            echo "node-$uid:$hostname" >> hostnames.$ENV
+        else
+            echo "Already got hostname $hostname for node-$uid"
+
+        fi
+    done
+
+    rm -f hostnames.$ENV.old
+    mv hostnames.$ENV hostnames.$ENV.old
+    sort hostnames.$ENV.old | uniq > hostnames.$ENV
+    modify_hostnames $ENV hostnames.$ENV
+}
+
+
+
+get_provisioning_info () {
+    ENV=$1
+    mkdir -p ${CONFIGDIR}
+    cd ${CONFIGDIR}
+    rm -Rf provisioning_$ENV
+    echo "Getting provisioning info..."
+    fuel --env $ENV provisioning --default
+    if [ $? -ne 0 ]; then
+        echo "Error: Could not get provisioning info for env $ENV">&2
+        exit 1
+    fi
+}
+
+get_deployment_info () {
+    ENV=$1
+    mkdir -p ${CONFIGDIR}
+    cd ${CONFIGDIR}
+    rm -Rf deployment_$ENV
+    echo "Getting deployment info..."
+    fuel --env $ENV deployment --default
+    if [ $? -ne 0 ]; then
+        echo "Error: Could not get deployment info for env $ENV">&2
+        exit 1
+    fi
+}
+
+transform_yaml () {
+    ENV=$1
+    cd ${CONFIGDIR}
+    for dfile in deployment_$ENV/*.yaml
+    do
+        /opt/opnfv/transform_yaml.py $dfile
+    done
+}
+
+commit_changes () {
+    ENV=$1
+    cd ${CONFIGDIR}
+
+    fuel --env $ENV deployment --upload
+    fuel --env $ENV provisioning --upload
+}
+
+add_yaml_fragment () {
+    ENV=$1
+    FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV
+
+    cd ${CONFIGDIR}
+    for dfile in deployment_$ENV/*.yaml
+    do
+        cnt=`grep "^opnfv:" $dfile | wc -l `
+        if [ $cnt -eq 0 ]; then
+            echo "Adding fragment to $dfile"
+            cat $FRAGMENT >> $dfile
+       else
+            echo "Already have fragment in $dfile"
+       fi
+    done
+}
+
+
+ip_valid() {
+    IP_ADDRESS="$1"
+    # Check if the format looks right_
+    echo "$IP_ADDRESS" | egrep -qE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' || return 1
+    #check that each octect is less than or equal to 255:
+    echo $IP_ADDRESS | awk -F'.' '$1 <=255 && $2 <= 255 && $3 <=255 && $4 <= 255 {print "Y" } ' | grep -q Y || return 1
+    return 0
+}
+
+
+generate_ntp_entry() {
+    FILE=$1
+    read -p "NTP server:" NTP_SERVER
+    if [ -z "$NTP_SERVER" ]; then
+        return 1
+    elif confirm_yes "Are you sure you want to add this entry (y/n): "; then
+        echo "Confirmed"
+        echo "      server $NTP_SERVER" >> $FILE
+    fi
+}
+
+generate_hostfile_entry() {
+    FILE=$1
+    read -p "Name:" HOST_NAME
+    if [ -z "$HOST_NAME" ]; then
+        return 1
+    else
+        read -p "FQDN:" HOST_FQDN
+        read -p "IP:  " HOST_IP
+        while ! ip_valid "$HOST_IP"
+        do
+            echo "This is not a valid IP! Try again."
+            read -p "IP:  " HOST_IP
+        done
+    fi
+    if confirm_yes "Are you sure you want to add this entry (y/n): "; then
+        echo "Confirmed"
+        echo "  - name: $HOST_NAME" >> $FILE
+        echo "    address: $HOST_IP" >> $FILE
+        echo "    fqdn: $HOST_FQDN" >> $FILE
+    else
+        echo "Not confirmed"
+    fi
+    return 0
+}
+
+generate_dns_entry() {
+    FILE=$1
+    PROMPT=$2
+    read -p "${PROMPT}:" DNS_IP
+    if [ -z "$DNS_IP" ]; then
+        return 1
+    else
+        while ! ip_valid "$DNS_IP"
+        do
+            echo "This is not a valid IP! Try again."
+            read -p "${PROMPT}: " DNS_IP
+        done
+    fi
+    if confirm_yes "Are you sure you want to add this entry (y/n): "; then
+        echo "Confirmed"
+        echo "    - $DNS_IP" >> $FILE
+    else
+        echo "Not confirmed"
+    fi
+    return 0
+}
+
+confirm_yes() {
+    prompt=$1
+    while true
+    do
+        read -p "$prompt" YESNO
+        case $YESNO in
+            [Yy])
+                return 0
+                ;;
+            [Nn])
+                return 1
+                ;;
+        esac
+    done
+}
+
+generate_yaml_fragment() {
+    ENV=$1
+    FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV
+
+    if [ -f $FRAGMENT ]; then
+        echo "Manual configuration already performed, reusing previous data from $FRAGMENT."
+        echo "Press return to continue or ^C to stop."
+        read ans
+        return
+    fi
+
+    echo "opnfv:" > ${FRAGMENT}
+
+    clear
+    echo -e "\n\nPre-deployment configuration\n\n"
+
+    echo -e "\n\nIPs for the DNS servers to go into /etc/resolv.conf. You will be"
+    echo -e "prompted for one IP at the time. Press return on an empty line"
+    echo -e "to complete your input. If no DNS server is specified, the IP of"
+    echo -e "the Fuel master will be used instead.\n"
+
+    DNSCICYAML=${CONFIGDIR}/cicdns.yaml.$ENV
+    rm -f $DNSCICYAML
+
+    echo -e "\n\n"
+
+    while generate_dns_entry $DNSCICYAML "IP for CIC name servers"
+    do
+        :
+    done
+
+    if [ -f $DNSCICYAML ]; then
+        echo "  dns:" >> $FRAGMENT
+        echo "    controller:" >> $FRAGMENT
+        cat $DNSCICYAML >> $FRAGMENT
+    fi
+
+
+    DNSCMPYAML=${CONFIGDIR}/cmpdns.yaml.$ENV
+    rm -f $DNSCMPYAML
+
+    echo -e "\n\n"
+
+    while generate_dns_entry $DNSCMPYAML "IP for compute node name servers"
+    do
+        :
+    done
+
+
+    if [ -f $DNSCMPYAML ]; then
+        if [ ! -f $DNSCICYAML ]; then
+            echo "  dns:" >> $FRAGMENT
+        fi
+        echo "    compute:" >> $FRAGMENT
+        cat $DNSCMPYAML >> $FRAGMENT
+    fi
+
+    echo -e "\n\nHosts file additions for controllers and compute nodes. You will be"
+    echo -e "prompted for name, FQDN and IP for each entry. Press return when prompted"
+    echo -e "for a name when you have completed your input.\n"
+
+
+    HOSTYAML=${CONFIGDIR}/hosts.yaml.$ENV
+    rm -f $HOSTYAML
+    while generate_hostfile_entry $HOSTYAML
+    do
+        :
+    done
+
+    if [ -f $HOSTYAML ]; then
+        echo "  hosts:" >> $FRAGMENT
+        cat $HOSTYAML >> $FRAGMENT
+    fi
+
+    echo -e "\n\nNTP upstream configuration for controllers.You will be"
+    echo -e "prompted for a NTP server each entry. Press return when prompted"
+    echo -e "for a NTP serverwhen you have completed your input.\n"
+
+
+    NTPYAML=${CONFIGDIR}/ntp.yaml.$ENV
+    rm -f $NTPYAML
+    while generate_ntp_entry $NTPYAML
+    do
+        :
+    done
+
+    if [ -f $NTPYAML ]; then
+        echo "  ntp:" >> $FRAGMENT
+        echo "    controller: |" >> $FRAGMENT
+        cat $NTPYAML >> $FRAGMENT
+
+        echo "    compute: |" >> $FRAGMENT
+        for ctl in `find $CONFIGDIR/deployment_$ENV -name '*controller*.yaml'`
+        do
+           fqdn=`grep "^fqdn:" $ctl | sed 's/fqdn: *//'`
+           echo "      server $fqdn" >> $FRAGMENT
+        done
+    fi
+
+    # If nothing added make sure we get an empty opnfv hash
+    # instead of a NULL hash.
+    if [ $(wc -l $FRAGMENT | awk '{print $1}') -le 1 ]; then
+        echo "opnfv: {}" >$FRAGMENT
+    fi
+}
+
+ENV=$(get_env "$@")
+
+CONFIGDIR="/var/lib/opnfv"
+mkdir -p $CONFIGDIR
+
+get_deployment_info $ENV
+# Uncomment the below to enable the control_bond example
+#transform_yaml $ENV
+get_provisioning_info $ENV
+generate_yaml_fragment $ENV
+# The feature to change hostnames from node-<n> to cmp- or cic- is disabled.
+# To turn it on, uncomment the following line.
+#setup_hostnames $ENV
+add_yaml_fragment $ENV
+commit_changes $ENV
diff --git a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh b/fuel/build/f_isoroot/f_predeployment/sysinfo.sh
new file mode 100755
index 0000000..e99cac0
--- /dev/null
+++ b/fuel/build/f_isoroot/f_predeployment/sysinfo.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+dockerctl shell cobbler cobbler system list | grep -v default | xargs -n 1 host  | sort | sed 's/\..* /\t/'
diff --git a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py b/fuel/build/f_isoroot/f_predeployment/transform_yaml.py
new file mode 100755
index 0000000..14eec4c
--- /dev/null
+++ b/fuel/build/f_isoroot/f_predeployment/transform_yaml.py
@@ -0,0 +1,68 @@
+#!/usr/bin/python
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+# Remove control and management network transformations from file.
+# Only to be used together with f_control_bond_example (enable in
+# pre-deploy.sh)
+
+import yaml
+import re
+import sys
+import os
+
+if len(sys.argv) != 2:
+    sys.stderr.write("Usage: "+sys.argv[0]+" <filename>\n")
+    sys.exit(1)
+
+filename = sys.argv[1]
+if not os.path.exists(filename):
+    sys.stderr.write("ERROR: The file "+filename+" could not be opened\n")
+    sys.exit(1)
+
+ignore_values = [ "eth0", "eth1", "br-mgmt", "br-fw-admin" ]
+
+infile = open(filename, 'r')
+doc = yaml.load(infile)
+infile.close()
+
+out={}
+
+for scheme in doc:
+    if scheme == "network_scheme":
+        mytransformation = {}
+        for operation in doc[scheme]:
+            if operation == "transformations":
+                # We need the base bridges for l23network to be happy,
+                # remove everything else.
+                mytrans = [ { "action": "add-br", "name": "br-mgmt" },
+                            { "action": "add-br", "name": "br-fw-admin" } ]
+                for trans in doc[scheme][operation]:
+                    delete = 0
+                    for ignore in ignore_values:
+                        matchObj = re.search(ignore,str(trans))
+                        if matchObj:
+                            delete = 1
+                    if delete == 0:
+                        mytrans.append(trans)
+                    else:
+                        pass
+                        #print "Deleted", trans
+
+                mytransformation[operation] = mytrans
+            else:
+                mytransformation[operation] = doc[scheme][operation]
+        out[scheme] = mytransformation
+    else:
+        out[scheme] = doc[scheme]
+
+outfile = open(filename, 'w')
+outfile.write(yaml.dump(out, default_flow_style=False))
+outfile.close()