Age | Commit message (Collapse) | Author | Files | Lines |
|
JIRA: FUNCTEST-446
Reduce the logs that appear in the Jenkins CI console to make the output
of the SFC test case more readable
- Redirect tacker installation logs to results folder
/home/opnfv/functest/results/odl-sfc.log
- Split odl-sfc preparation into a new script
- Pipe STDERR in the sfc.py script so that "Added to known hosts"
messages do not show in the output
Change-Id: Ibf871ade6827d4817f33623b935c5f1d904086bb
Signed-off-by: George Paraskevopoulos <geopar@intracom-telecom.com>
|
|
|
|
|
|
Since there is a function in functest_utils to get
a value from the config_functest.yaml directly, there
is no need to load again that file. Better to use common
functions that are designed for that.
Also, Replace location of the results json file to
the results directory. It will be also pushed to artifacts
repository.
Change-Id: Ic6422ed78ccd0f8b40b519342a7dcf38c502924e
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
Test cases can be excluded from execution based on installer/scenario
via blacklist file.
JIRA: FUNCTEST-451
Change-Id: I17bbd5f1364a890b88bc196cbc5f49c492df1cb1
Signed-off-by: Juha Kosonen <juha.kosonen@nokia.com>
|
|
Change-Id: Ic4daa57ddbf6587660f982acd915cd4363d3ccbc
Signed-off-by: Carlos Goncalves <carlos.goncalves@neclab.eu>
|
|
|
|
|
|
The output shown in the Jenkins console will now be
redirected to a file which will be available and linked
to the artifacts repository.
Change-Id: I2e9b5c2ab681a787aa0fc249844cc13feb581764
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
Only restrictions table in release notes is updated.
Change-Id: I8f27a876058eabe1c490fc5980de5626aed665a3
Signed-off-by: vitikkan <viktor.tikkanen@nokia.com>
|
|
|
|
All the tempest_smoke_serial test cases that use floating IP
addresses for accessing instances are excluded because of
ODL bug https://bugs.opendaylight.org/show_bug.cgi?id=5586
JIRA: FUNCTEST-445
Change-Id: I19468be108a25e989c0cfef031bbe5f2b9db0964
Signed-off-by: vitikkan <viktor.tikkanen@nokia.com>
|
|
|
|
To keep the jenkins console clean and readable,
dump all the output that the Copper test case
generates to a log file and push it to artifact
repository at the end.
Change-Id: If4812c7e92b4d050757ca07333f7c353a0220056
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
|
|
To keep the jenkins console clean and readable,
dump all the output that the Parser test case
generates to a log file and push it to artifact
repository at the end.
Change-Id: I04c8507fda535c7bcb0919fc3bc5877336664942
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
The security scan test case generates sometimes too much output
messages and makes Jenkins unreadable.
For example:
https://build.opnfv.org/ci/job/functest-apex-apex-daily-colorado-daily-colorado/65/console
80% of the output belongs to this test case.
This patch will reduce it since debug information is not
showed in Jenkins but it is pushed as part of
functest.log to artifacts.
Change-Id: I56b3adf87d302d118ee5c15eb86bc10237a7cc4e
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
Change-Id: Iaf0859775933ba09cbbe170af3ce4ed1e6d3e9a1
Signed-off-by: boucherv <valentin.boucher@orange.com>
|
|
It follows the recommendations described in the next review [1].
[1] https://gerrit.opnfv.org/gerrit/#/c/19795/
Change-Id: Ie7ce28451122c554f135caad068844c0303deaeb
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
functest repo is used by almost every testcase, each place we get it like:
REPOS_DIR = os.getenv('repos_dir')
FUNCTEST_REPO = ("%s/functest" % REPOS_DIR)
provide a common interface in functest_util.py
JIRA: FUNCTEST-453
Change-Id: Ie0635dacc761ed2d05b7e606530368844f32ebaf
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
|
|
|
|
- Change the way the test checks if the vxlan_tool has started.
Now the vxlan_tool is detected even if another python process is up.
- Log the exceptions in the vxlan_tool check block. The exceptions that
occur are not destructive for the testcase but it's better to be
visible.
- Add a 60 seconds sleep before the testcase starts to give plenty of
time to ODL to add the correct flows.
- Move the testcase success/fail check blocks inside the try blocks.
The checks are performed on the stdout variable which is in scope
only inside the try blocks.
Change-Id: I49dec176fb83117e9896ac1d19e8a5bd95e3d7cf
Signed-off-by: George Paraskevopoulos <geopar@intracom-telecom.com>
|
|
JIRA: FUNCTEST-428
Change-Id: I1aab08f8f92df3b5527e6f8121cdf45aec2f5c17
Signed-off-by: boucherv <valentin.boucher@orange.com>
|
|
functest_yaml is needed in almost all of the testcases, the obtain process is the same:
with open(os.environ["CONFIG_FUNCTEST_YAML"]) as f:
functest_yaml = yaml.safe_load(f)
f.close()
abstract a method to unify the process, and provide the interface
JIRA: FUNCTEST-447
Change-Id: I96a9a9962d7b466f10bbd3b5ab2495957524e22a
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
As it modifies method params, it could break the testcases.
JIRA: FUNCTEST-428
Change-Id: I4263d9bd812f1803e513464e3c321cc4a7281958
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
|
|
- If its not possible to get the IPs, then exit
- Patch Set 2: addressed code review comments
Change-Id: I16e22513b32e2b0da311ebcc280f3611570634a3
Signed-off-by: Brady Johnson <brady.allen.johnson@ericsson.com>
|
|
FUNCTEST_REPO appears in lots of feature testcases, but never be used, delete it clean the code
JIRA: FUNCTEST-448
Change-Id: I4a9a10eac29e09b481563ed2c33f4122dd9ee3de
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
This patch will disable the test cases which does not make sense
to run on LXD deployments.
Change-Id: I683b3714aa5af3c750ca57fab9fceff907b7d646
Signed-off-by: Narinder Gupta <narinder.gupta@canonical.com>
|
|
Since the poc script is fixed it's fuel commit hash in the setup
script have to be updated to select the fixed poc script.
Change-Id: I1fd22e4dc216fd2889adea0c9889df1d4a1bf476
Signed-off-by: Ferenc Cserepkei <ferenc.cserepkei@ericsson.com>
|
|
Change-Id: I7115018e64a2413209313b9a432d3d1b59e841d1
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>
|
|
Some places shared network is created through create_network_full first,
then update it to shared, abstract a uniformed method to eliminate reduplicate
JIRA: FUNCTEST-437
Change-Id: I13c20ab061323188c5eb3b8c861674df38083c62
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
|
|
|
|
|
|
Some places when create image is referred, they check if image exist,
if exist use it directly, else create a new one.
Abstract a method to integrate the process
JIRA: FUNCTEST-432
Change-Id: I83d1112aa5cb0d3cdfab92fd49cd5f2c1cceff82
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
Now run_tests.py calls directly OpenDaylightTesting.functest_run().
It mainly reads env vars as exec_test.sh does.
Change-Id: Ibb44a7ca67e9218d34d13b8dd539e772902fe5b8
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
fix missed the apt-get action
Change-Id: Iac94576a2f712133eee92e4b5460f85d59e90e94
Signed-off-by: Ferenc Cserepkei <ferenc.cserepkei@ericsson.com>
|
|
The fix https://gerrit.opnfv.org/gerrit/#/c/19351 will need
more time for dicussion. In the meanwhile we can use this
one so that CI does not break anymore.
Change-Id: Icbd54200bd62e5019c2a556699ceb41afdb229ca
Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
|
|
|
|
|
|
In openstack_util.py, when create/get/update network or other resources failed,
False is returned, which is incompatible with success return value such as id, network_nic.
JIRA: FUNCTEST-427
Change-Id: Id2f55d8524e5aff150ba6bfb799085377a63baa4
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
Skip TestServerBasicOps which fails when deleting server
and floating ip almost at the same time.
JIRA: FUEL-173
JIRA: FUEL-176
Change-Id: I24f3397096757028bed9d32d6353aa689e8eaa9a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
During generating tempest.conf file rally tries to download
cirros image from the internet if no suitable images exist in
the configuration. This change ensures that cirros image is
created before generating tempest.conf file.
JIRA: FUNCTEST-195
Change-Id: I9e2df8af40bd02db9b78b8b6b730b4f4168a8b2d
Signed-off-by: vitikkan <viktor.tikkanen@nokia.com>
|
|
It conforms to the current implementation of functest_utils
Change-Id: I50fa05fbf81a7c76cf4a6e3ef906fffe8aec15bf
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
In rally, image_exists is used to decide whether the image
resource should be cleaned or not. But unlike rally,
image_exists in vping is only assigned but not never be actually used.
JIRA: FUNCTEST-426
Change-Id: Id2089dd2a9734ba957cc1c80d4dc31bc27907b0a
Signed-off-by: SerenaFeng <feng.xiaowei@zte.com.cn>
|
|
Change-Id: Ia70c1db358b727a910a38b679de0e3c6febdb0cd
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
|
|
Change-Id: I91681736817f881ca53e5124328bd4399aa54740
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* changes:
Avoid opening tmp files twice
Add logs (info)
Improve errors and status codes management
|