aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/configguide/configguide.rst816
-rw-r--r--docs/configguide/index.rst119
-rw-r--r--docs/devguide/index.rst364
3 files changed, 902 insertions, 397 deletions
diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst
index c0444c6b0..7c8ce8b8c 100644
--- a/docs/configguide/configguide.rst
+++ b/docs/configguide/configguide.rst
@@ -5,47 +5,246 @@
Preparing the Docker container
------------------------------
-Pull the Functest Docker image from the Docker hub::
+Pull the Functest Docker image ('opnfv/functest') from the public dockerhub
+registry under the OPNFV account: [dockerhub_], with the following docker
+command::
- docker pull opnfv/functest:brahmaputra.1.0
+ docker pull opnfv/functest:<TagIdentifier>
+where <TagIdentifier> identifies a specifically tagged release of the Functest
+docker container image in the public dockerhub registry. There are many
+different tags created automatically by the CI mechanisms, but you must ensure
+you pull an image with the **correct tag** to match the OPNFV software release
+installed in your environment. All available tagged images can be seen from
+location [FunctestDockerTags_]. For example, when running on the first official
+release of the OPNFV Colorado system platform, tag "colorado.1.0" is needed.
+Pulling other tags might cause some problems while running the tests. If you
+need to specifically pull the latest Functest docker image, then omit the tag
+argument::
-Check that the image is available::
- docker images
+ docker pull opnfv/functest
-Run the docker container giving the environment variables:
+After pulling the Docker image, check that the pulled image is available with
+the following docker command::
- * **INSTALLER_TYPE** : possible values are **apex**, **compass**, **fuel** or **joid**.
- * **INSTALLER_IP** : IP of the installer node/VM.
-
-Functest may need to know the IP of the installer to retrieve automatically the
-credentials from the installer node/VM or even from the actual controllers.
-
-The minimum command to create the Functest Docker container can be described as
-follows::
+ [functester@jumphost ~]$ docker images
- docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash
+ REPOSITORY TAG IMAGE ID CREATED SIZE
+ opnfv/functest latest 8cd6683c32ae 2 weeks ago 1.611 GB
+ opnfv/functest brahmaputra.3.0 94b78faa94f7 4 weeks ago 874.9 MB
+ hello-world latest 94df4f0ce8a4 7 weeks ago 967 B
-Optionally, it is possible to precise the container name through the option
-**--name**::
+ (Docker images pulled without a tag specifier bear the implicitly
+ assigned label "latest", as seen above.)
- docker run --name "CONTAINER_NAME" -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash
+The Functest docker container environment can -in principle- be also used with
+non-OPNFV official installers (e.g. 'devstack), with the **disclaimer** that
+support for such environments is outside of the scope of responsibility of the
+OPNFV project.
-It is also possible to to indicate the path of the OpenStack credentials using **-v**::
+The minimum command to create the Functest Docker container can be described as
+follows::
- docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds opnfv/functest:brahmaputra.1.0 /bin/bash
+ docker run -it opnfv/functest:<TagIdentifier> /bin/bash
-The local file will be mounted in the container under
-*/home/opnfv/functest/conf/openstack.creds*
+For OPNFV official installers, it is recommended (although no longer mandatory)
+to provide two additional environment variables, in the 'docker run ...'
+command nvocation:
-If the intention is to run Functest against any of the supported OPNFV scenarios,
-it is recommended to include also the environment variable **DEPLOY_SCENARIO**,
-for example::
+ * **INSTALLER_TYPE** : possible values are **apex**, **compass**, **fuel** or
+ **joid**.
+ * **INSTALLER_IP** : IP of the installer node/VM.
- docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -e "DEPLOY_SCENARIO=os-odl_l2-nofeature-ha" opnfv/functest:brahmaputra.1.0 /bin/bash
+Functest may need to know the IP of the installer to retrieve automatically the
+credentials from the installer node/VM or even from the actual controllers.
-Inside the container, the following directory structure should be in place::
+Thus, the recommended minimum command to create the Functest Docker container
+for OPNFV installer can be described (using installer 'fuel', and an invented
+INSTALLER_IP of '10.20.0.2', for example), as follows::
+
+ docker run -it \
+ -e "INSTALLER_IP=10.20.0.2" \
+ -e "INSTALLER_TYPE=fuel" \
+ opnfv/functest:<TagIdentifier> /bin/bash
+
+Optionally, it is possible to assign precisely a container name through the
+**--name** option::
+
+ docker run --name "CONTAINER_NAME" -it \
+ -e "INSTALLER_IP=10.20.0.2" \
+ -e "INSTALLER_TYPE=fuel" \
+ opnfv/functest:<TagIdentifier> /bin/bash
+
+It is also possible to to indicate the path of the OpenStack credentials using a
+**-v** option::
+
+ docker run -it \
+ -e "INSTALLER_IP=10.20.0.2" \
+ -e "INSTALLER_TYPE=fuel" \
+ -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds \
+ opnfv/functest:<TagIdentifier> /bin/bash
+
+ NOTE: Make sure you have placed the needed credential file into the
+ Jumphost local path <path_to_your_local_cred_file>. For the
+ Apex Installer you will need to pre-copy the required OpenStack
+ credentials file from the Instack/Undercloud Virtual Machine.
+ See the section 'Apex Installer Tips' later in this document.
+
+ Warning
+ -------
+ If you are using the Joid installer, you must use the method above
+ to provide the required OpenStack credentials. See the section
+ 'Focus on the OpenStack credentials' later in this document.
+
+
+The local openstack credential file will be mounted in the Docker container
+under the path: '/home/opnfv/functest/conf/openstack.creds'
+
+If the intention is to run Functest against any of the supported OPNFV
+scenarios, it is recommended to include also the environment variable
+**DEPLOY_SCENARIO**. The **DEPLOY_SCENARIO** environment variable is passed with the format::
+
+ -e "DEPLOY_SCENARIO=os-<controller>-<nfv_feature>-<ha_mode>"
+
+ where:
+ os = OpenStack (No other VIM choices currently available)
+ controller is one of ( nosdn | odl_l2 | odl_l3 | onos | ocl )
+ nfv_feature is one or more of ( ovs | kvm | sfc | bgpvpn | nofeature )
+ If several features are pertinent then use the underscore
+ character '_' to separate each feature (e.g. ovs_kvm)
+ 'nofeature' indicates no NFV feature is deployed
+ ha_mode is one of ( ha | noha )
+
+For example::
+
+ docker run -it \
+ -e "INSTALLER_IP=10.20.0.2" \
+ -e "INSTALLER_TYPE=fuel" \
+ -e "DEPLOY_SCENARIO=os-odl_l2-ovs_kvm-ha" \
+ opnfv/functest:<TagIdentifier> /bin/bash
+
+**NOTE:** Not all possible combinations of "DEPLOY_SCENARIO" are supported.
+The scenario name passed in to the Functest Docker container must match the
+scenario used with the selected installer to create the actual OPNFV platform
+deployment.
+
+Finally, three additional environment variables can also be passed in to the
+Functest Docker Container, using the -e "<EnvironmentVariableName>=<Value>"
+mechanism. The first two of these are only relevant to Jenkins CI invoked
+testing and **should not be used** when performing manual test scenarios::
+
+ -e "NODE_NAME=<Test POD Name>" \
+ -e "BUILD_TAG=<Jenkins Build Tag>" \
+ -e "CI_DEBUG=<DebugTraceValue>"
+
+ where:
+ <Test POD Name> = Symbolic name of the POD where the tests are run.
+ Visible in test results files, which are stored
+ to the database. This option is only used when
+ tests are activated under Jenkins CI control.
+ It indicates the POD/hardware where the test has
+ been run. If not specified, then the POD name is
+ defined as "Unknown" by default.
+ DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS.
+
+ <Jenkins Build tag> = Symbolic name of the Jenkins Build Job.
+ Visible in test results files, which are stored
+ to the database. This option is only set when
+ tests are activated under Jenkins CI control.
+ It enables the correlation of test results, which
+ are independently pushed to the results datbase
+ from different Jenkins jobs.
+ DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS.
+
+ <DebugTraceValue> = "true" or "false"
+ Default = "false", if not specified
+ If "true" is specified, then additional debug trace
+ text can be sent to the test results file / log files
+ and also to the standard console output.
+
+Apex Installer Tips
+-------------------
+Some specific tips are useful for the Apex Installer case. If not using Apex
+Installer; ignore this section.
+
+ #. The "INSTALLER_IP" environment variable should be set equal to the IP
+ address of the so-called "Instack/undercloud Virtual Machine".
+
+ In the Jumphost, execute the following command and note the returned
+ IP address::
+
+ sudo virsh domifaddr undercloud | grep -Eo "[0-9.]+{4}"
+
+ NOTE: In releases prior to Colorado, the name 'instack' was
+ used. From Colorado onward, the name 'undercloud' is used.
+ If in doubt, then execute -from the Jumphost- the command
+ "virsh list" to see which name is in use for the Installer
+ Virtual Machine.
+
+ You can now enter the <Specific IP Address> as learned in the above step in the
+ -e option specification::
+
+ -e "INSTALLER_IP=<Specific IP Address>"
+
+ #. If you want to 'Bind mount' a local Openstack credentials file ("overcloudrc")
+ to the Docker container, then you may need to first pre-copy that file from the
+ 'Instack/Undercloud VM' to the Jump host.
+
+ As before, in the Jumphost, execute the following command and note the
+ returned IP address::
+
+ sudo virsh domifaddr undercloud | grep -Eo "[0-9.]+{4}"
+
+ Using the <Specific IP Address> just learned above, execute the following
+ shell commands **in the Jumphost**, before issuing the 'docker run ...' command
+ invocation::
+
+ scp stack@<Specific IP Address>:overcloudrc .
+ sed -i 's/export no_proxy/#export no_proxy/' overcloudrc
+ # The above 'sed' command is needed *only* in cases where
+ # the Jumphost is operating behind a http proxy.
+ # See the 'Proxy Support' section later on in this document
+
+ NOTE: There are two Openstack credential files present in the
+ Instack/Undercloud VM: 'overcloudrc' and 'stackrc'.
+ Don't mix these up! The file 'stackrc' is intended for use with
+ 'Triple O Undercloud'; only. The SUT always requires OpenStack
+ Overcloud Credentials.
+
+ The file located at Jumphost path: '~/overcloudrc' is now 'Bind mounted'
+ to the Docker path '/home/opnfv/functest/conf/openstack.creds'
+ by specifying a **-v** option::
+
+ -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds
+
+ in the argument list of the 'docker run ...' command invocation. In the
+ Apex installer case, the Openstack Credential file has the name
+ 'overcloudrc' and is located in the home directory of the 'stack' user
+ ( '/home/stack/' or '~/'] ) in the 'Instack/Undercloud VM'.
+
+ #. In order that the docker container can access the Instack/Undercloud VM,
+ even with 'stack' user, the SSH keys of the Jumphost root user **must be**
+ 'Bind mounted' to the docker container by the following **-v** option in
+ the 'docker run ...' command invocation::
+
+ -v /root/.ssh/id_rsa:/root/.ssh/id_rsa
+
+ #. Here is an example of the docker command invocation for an Apex installed
+ system, using latest Funtest docker container, for illustration purposes::
+
+ docker run -it --name "ApexFuncTstODL" \
+ -e "INSTALLER_IP=<Specific IP Address>" \
+ -e "INSTALLER_TYPE=apex" \
+ -e "DEPLOY_SCENARIO=os-odl_l2-nofeature-ha" \
+ -v /root/.ssh/id_rsa:/root/.ssh/id_rsa \
+ -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds \
+ opnfv/functest /bin/bash
+
+Functest docker container directory structure
+---------------------------------------------
+Inside the Functest docker container, the following directory structure should
+now be in place::
`-- home
`-- opnfv
@@ -59,93 +258,130 @@ Inside the container, the following directory structure should be in place::
|-- functest
|-- odl_integration
|-- onos
+ |-- ovno
|-- promise
|-- rally
|-- releng
`-- vims-test
+ (The sub-directory 'ovno' holds SDN controller functional tests
+ for the OpenContrail SDN Controller, which should be available
+ for Colorado release)
-Basically the container includes:
+Underneath the '/home/opnfv/' directory, the Functest docker container
+includes two main directories:
- * Functest directory to store the configuration (the OpenStack creds are stored
- in /home/opngb/functest/conf/openstack.creds), the data (cirros image needed for
- some tests), results (some temporary result logs may be stored here)
- * Repositories: the functest repository will be used to prepare the
- environment and run the tests. Other repositories are used for the installation
- of the needed tooling (e.g. rally) and/or the retrieval of feature projects
- scenarios (e.g. promise)
+ * The **functest** directory stores configuration files (e.g. the OpenStack
+ creds are stored in path '/home/opnfv/functest/conf/openstack.creds'), the
+ **data** directory stores a 'cirros' test image used in some functional
+ tests and the **results** directory stores some temporary result log files
+ * The **repos** directory holds various repositories. The directory
+ '/home/opnfv/repos/functest' is used to prepare the needed Functest
+ environment and to run the tests. The other repository directories are
+ used for the installation of the needed tooling (e.g. rally) or for the
+ retrieval of feature projects scenarios (e.g. promise)
-The structure under the Functest repository can be described as follows::
+The structure under the **functest** repository can be described as follows::
- .
- |-- INFO
+ . |-- INFO
|-- LICENSE
+ |-- __init__.py
+ |-- ci
+ | |-- __init__.py
+ | |-- check_os.sh
+ | |-- config_functest.yaml
+ | |-- exec_test.sh
+ | |-- prepare_env.py
+ | |-- run_tests.py
+ | |-- testcases.yaml
+ | |-- tier_builder.py
+ | `-- tier_handler.py
+ |-- cli
+ | |-- __init__.py
+ | |-- cli_base.py
+ | |-- commands
+ | |-- functest-complete.sh
+ | `-- setup.py
|-- commons
| |-- ims
| |-- mobile
- | `-- traffic-profile-guidelines.rst
+ | `--traffic-profile-guidelines.rst
|-- docker
| |-- Dockerfile
- | |-- common.sh
- | |-- prepare_env.sh
- | |-- requirements.pip
- | `-- run_tests.sh
+ | |-- config_install_env.sh
+ | `-- requirements.pip
|-- docs
+ | |-- com
| |-- configguide
| |-- devguide
| |-- images
+ | |-- release-notes
| |-- results
- | `-- userguide
- `-- testcases
- |-- Controllers
- |-- features
- |-- tests
- |-- VIM
- |-- vIMS
- |-- vPing
+ | `--userguide
+ |-- testcases
+ | |-- Controllers
+ | |-- OpenStack
+ | |-- __init__.py
+ | |-- features
+ | |-- security_scan
+ | `-- vIMS
+ `-- utils
|-- __init__.py
- |-- config_functest.py
- |-- config_functest.yaml
- `-- functest_utils.py
-
-We may distinguish 4 different folders:
-
- * **commons**: it is a folder dedicated to store traffic profile or any test
- inputs that could be reused by any test project
- * **docker**: this folder includes the scripts that will be used to setup the
- environment and run the tests
- * **docs**: this folder includes the user and installation/configuration guide
- * **testcases**: this folder includes the scripts required by Functest internal
- test cases and other feature projects test cases.
-
-After the *run* command, a new prompt appears which means that we are inside the
-container and ready to move to the next step.
-
+ |-- clean_openstack.py
+ |-- functest_logger.py
+ |-- functest_utils.py
+ |-- generate_defaults.py
+ `-- openstack_utils.py
+
+ (Note: All *.pyc files removed from above list for brevity...)
+
+We may distinguish 7 different directories:
+
+ * **ci**: This directory contains test structure defintion files
+ (e.g <filename>.yaml) and bash shell/python scripts used to configure and
+ execute Functional tests. The test execution script can be executed under
+ the control of Jenkins CI jobs.
+ * **cli**: This directory holds the python based Functest CLI utility source
+ code, which is based on the Python 'click' framework.
+ * **commons**: This directory is dedicated for storage of traffic profile or
+ any other test inputs that could be reused by any test project.
+ * **docker**: This directory includes the needed files and tools to build the
+ Funtest Docker container image.
+ * **docs**: This directory includes documentation: Release Notes, User Guide,
+ Configuration Guide and Developer Guide. Test results are also located in
+ a sub--directory called 'results'.
+ * **testcases**: This directory includes the scripts required by Functest
+ internal test cases and other feature projects test cases.
+ * **utils**: this directory holds Python source code for some general purpose
+ helper utilities, which testers can also re-use in their own test code.
+ See for an example the Openstack helper utility: 'openstack_utils.py'.
+
+After the *run* command, a new prompt appears which means that we are inside
+the container and ready to move to the next step.
Useful Docker commands
----------------------
+When typing **exit** in the container prompt, this will cause exiting the
+container and probably stopping it. When stopping a running Docker container
+all the changes will be lost, there is a keyboard shortcut to quit the
+container without stopping it: CTRL+P+Q. To reconnect to the running container
+**DO NOT** use the *run* command again (since it will create a new container),
+use the *exec* command instead::
-When typing **exit** in the container prompt, this will cause
-exiting the container and probably stopping it. When stopping a running Docker container
-all the changes will be lost, there is a keyboard shortcut to
-quit the container without stopping it: CTRL+P+Q.
-To reconnect to the running container **DO NOT** use the *run* command again
-(since it will create a new container), use *exec* instead::
-
- docker ps
- <copy the container ID>
- docker exec -ti <CONTAINER_ID> /bin/bash
+ docker ps <copy the container ID> docker exec -ti \
+ <CONTAINER_ID> /bin/bash
or simply::
- docker exec -ti $(docker ps|grep functest|awk '{print $1}') /bin/bash
+ docker exec -ti \
+ $(docker ps|grep functest|awk '{print $1}') /bin/bash
There are other useful Docker commands that might be needed to manage possible
issues with the containers.
List the running containers::
- docker ps
+ docker ps
List all the containers including the stopped ones::
@@ -155,161 +391,369 @@ It is useful sometimes to remove a container if there are some problems::
docker rm <CONTAINER_ID>
-Use the *-f* option if the container is still running, it will force to destroy it::
+Use the *-f* option if the container is still running, it will force to
+destroy it::
docker -f rm <CONTAINER_ID>
The Docker image is called **opnfv/functest** and it is stored in the public
-Docker registry under the OPNFV account: dockerhub_.
-The are many different tags that have been created automatically by the CI
-mechanisms, but the one that this document refers to is **brahmaputra.1.0**.
-Pulling other tags might cause some problems while running the tests.
+Docker registry under the OPNFV account: dockerhub_. The are many different
+tags that have been created automatically by the CI mechanisms, but the one
+that this document refers to is **brahmaputra.1.0**. Pulling other tags might
+cause some problems while running the tests.
Check the Docker documentation dockerdocs_ for more information.
-
Preparing the Functest environment
----------------------------------
-
-Once the docker container is up and running, execute the following command in the
-prompt::
-
- ${repos_dir}/functest/docker/prepare_env.sh
-
-NOTE: **${repos_dir}** is a default environment variable inside the docker
-container, which points to */home/opnfv/repos/*
-
-This script will make sure that the requirements to run the tests are met and will
-install the needed libraries and tools by all Functest test cases. It must be run
-only once every time the docker is started from sratch.
-
+Once the Functest docker container is up and running, the required Functest
+environment needs to be prepared. A custom built **functest** CLI utility is
+availabe to perform the needed environment preparation action. Once the
+enviroment is prepared, the **functest** CLI utility can be used to run
+different functional tests. The usage of the **functest** CLI utility to run
+tests is described further in the Functest User Guide `OPNFV_FuncTestUserGuide`_
+
+Prior to commencing the Functest environment preparation, we can check the
+initial status of the environment. Issue the **functest env status** command at
+the prompt::
+
+ functest env status
+ Functest environment is not installed.
+
+ Note: When the Funtest environment is prepared, the command will
+ return the status: "Functest environment ready to run tests."
+
+To prepare the Functest docker container for test case execution, issue the
+**functest env prepare** command at the prompt::
+
+ functest env prepare
+
+This script will make sure that the requirements to run the tests are met and
+will install the needed libraries and tools by all Functest test cases. It
+should be run only once every time the Functest docker container is started
+from scratch. If you try to run this command, on an already prepared
+enviroment, you will be prompted whether you really want to continue or not::
+
+ functest env prepare
+ It seems that the environment has been already prepared.
+ Do you want to do it again? [y|n]
+
+ (Type 'n' to abort the request, or 'y' to repeat the
+ environment preparation)
+
+
+To list some basic information about an already prepared Functest docker
+container environment, issue the **functest env show** at the prompt::
+
+ functest env show
+ +======================================================+
+ | Functest Environment info |
+ +======================================================+
+ | INSTALLER: apex, 192.168.122.89 |
+ | SCENARIO: os-odl_l2-nofeature-ha |
+ | POD: localhost |
+ | GIT BRANCH: master |
+ | GIT HASH: 5bf1647dec6860464eeb082b2875798f0759aa91 |
+ | DEBUG FLAG: false |
+ +------------------------------------------------------+
+ | STATUS: ready |
+ +------------------------------------------------------+
+
+ Where:
+
+ INSTALLER: Displays the INSTALLER_TYPE value
+ - here = "apex"
+ and the INSTALLER_IP value
+ - here = "192.168.122.89"
+ SCENARIO: Displays the DEPLOY_SCENARIO value
+ - here = "os-odl_l2-nofeature-ha"
+ POD: Displays the value pass in NODE_NAME
+ - here = "loclahost"
+ GIT BRANCH: Displays the git branch of the OPNFV Functest
+ project repository included in the Functest
+ Docker Container.
+ - here = "master"
+ (In first official colorado release
+ would be "colorado.1.0")
+ GIT HASH: Displays the git hash of the OPNFV Functest
+ project repository included in the Functest
+ Docker Container.
+ - here = "5bf1647dec6860464eeb082b2875798f0759aa91"
+ DEBUG FLAG: Displays the CI_DEBUG value
+ - here = "false"
+
+ NOTE: In Jenkins CI runs, an additional item "BUILD TAG"
+ would also be listed. The valaue is set by Jenkins CI.
+
+Finally, the **functest** CLI has a basic 'help' system with so called
+**--help** options:
+
+Some examples::
+
+ functest --help Usage: functest [OPTIONS] COMMAND [ARGS]...
+
+ Options:
+ --version Show the version and exit.
+ -h, --help Show this message and exit.
+
+ Commands:
+ env
+ openstack
+ testcase
+ tier
+
+ functest env --help
+ Usage: functest env [OPTIONS] COMMAND [ARGS]...
+
+ Options:
+ -h, --help Show this message and exit.
+
+ Commands:
+ prepare Prepares the Functest environment.
+ show Shows information about the current...
+ status Checks if the Functest environment is ready...
Focus on the OpenStack credentials
----------------------------------
-
The OpenStack credentials are needed to run the tests against the VIM.
There are 3 ways to provide them to Functest:
* using the -v option when running the Docker container
- * create an empty file in /home/opnfv/functest/conf/openstack.creds and paste
- the credentials in it.
+ * create an empty file in '/home/opnfv/functest/conf/openstack.creds' and
+ paste the credentials into it. (Consult your installer guide to know from
+ where you can retrieve credential files, which are set-up in the Openstack
+ installation of the SUT)
* automatically retrieved using the following script::
- $repos_dir/releng/utils/fetch_os_creds.sh
-Once the credentials are there, they shall be sourced before running the tests::
-
- source /home/opnfv/functest/conf/openstack.creds
+ $repos_dir/releng/utils/fetch_os_creds.sh \
+ -d /home/opnfv/functest/conf/openstack.creds \
+ -i fuel \
+ -a 10.20.0.2"
+
+ (-d specifies the full destination path where to place the
+ copied Openstack credential file
+ -i specifies the INSTALLER_TYPE
+ -a specifies the INSTALLER_IP
+ If the installer is of type "fuel" and a Virtualized
+ deployment is used, then this should be indicated by
+ adding an option '-v'. The -v option takes no arguments.
+ It enables some needed special handling in the script.)
+
+ Note: If you omit the -d <full destination path> option in
+ the command invocation, then the script will create the
+ credential file with name 'opnfv-openrc.sh' in directory
+ '/home/opnfv'. In that case, you need to copy/edit the file
+ into the correct target path:
+ '/home/opnfv/functest/conf/openstack.creds'.
+
+**Warning** If you are using the Joid installer, the 'fetch_os_cred-sh' shell
+script **should not be used**. Use instead, the **-v** optin to Bind Mount a
+suitably prepared local copy of the Openstack credentials for usage by the Functest
+docker container
+
+Once the credentials are there, they should be sourced **before** running the
+tests::
+
+ source /home/opnfv/functest/conf/openstack.creds
or simply using the environment variable **creds**::
- . $creds
+ . $creds
-After this, try to run any OpenStack command to see if you get any output,
-for instance::
+After this, try to run any OpenStack command to see if you get any output, for
+instance::
- openstack user list
+ openstack user list
This will return a list of the actual users in the OpenStack deployment. In any
other case, check that the credentials are sourced::
- env|grep OS_
+ env|grep OS_
-This command must show a set of environment variables starting with *OS_*, for example::
+This command must show a set of environment variables starting with *OS_*, for
+example::
- OS_REGION_NAME=RegionOne
- OS_DEFAULT_DOMAIN=default
- OS_PROJECT_NAME=admin
- OS_PASSWORD=admin
- OS_AUTH_STRATEGY=keystone
- OS_AUTH_URL=http://172.30.10.3:5000/v2.0
- OS_USERNAME=admin
- OS_TENANT_NAME=admin
- OS_ENDPOINT_TYPE=internalURL
- OS_NO_CACHE=true
+ OS_REGION_NAME=RegionOne
+ OS_DEFAULT_DOMAIN=default
+ OS_PROJECT_NAME=admin
+ OS_PASSWORD=admin
+ OS_AUTH_STRATEGY=keystone
+ OS_AUTH_URL=http://172.30.10.3:5000/v2.0
+ OS_USERNAME=admin
+ OS_TENANT_NAME=admin
+ OS_ENDPOINT_TYPE=internalURL
+ OS_NO_CACHE=true
-If still the OpenStack command does not show anything or complains about
-connectivity issues, it could be due to an incorrect url given to the OS_AUTH_URL
-environment variable. Check the deployment settings.
+If the OpenStack command still does not show anything or complains about
+connectivity issues, it could be due to an incorrect url given to the
+OS_AUTH_URL environment variable. Check the deployment settings.
SSL Support
-----------
+If you need to connect to a server that is TLS-enabled (the auth URL begins
+with ‘https’) and it uses a certificate from a private CA or a self-signed
+certificate, then you will need to specify the path to an appropriate CA
+certificate to use, to validate the server certificate with the environment
+variable OS_CACERT::
-If you need to connect to a server that is TLS-enabled (the auth URL begins with ‘https’)
-and it uses a certificate from a private CA or a self-signed certificate you will
-need to specify the path to an appropriate CA certificate to use to validate the
-server certificate with the environment variable OS_CACERT::
-
- echo $OS_CACERT
- /etc/ssl/certs/ca.crt
-
-However, this certificate does not exist in the container by default. It has to
-be copied manually from the OpenStack deployment. This can be done in 2 ways:
+ echo $OS_CACERT
+ /etc/ssl/certs/ca.crt
- #. Create manually that file and copy the contents from the OpenStack controller.
+However, this certificate does not exist in the container by default. It has
+to be copied manually from the OpenStack deployment. This can be done in 2 ways:
- #. (recommended) Add the file using a Docker volume when starting the container::
-
- -v <path_to_your_cert_file>:/etc/ssl/certs/ca.cert
+ #. Create manually that file and copy the contents from the OpenStack
+ controller.
+ #. (Recommended) Add the file using a Docker volume when starting the
+ container::
+ -v <path_to_your_cert_file>:/etc/ssl/certs/ca.cert
You might need to export OS_CACERT environment variable inside the container::
- export OS_CACERT=/etc/ssl/certs/ca.crt
-
-
-Certificate verification can be turned off using OS_INSECURE=true.
-For example, Fuel uses self-signed cacerts by default, so an pre step would be::
-
- export OS_INSECURE=true
-
-
-Additional Options
-------------------
+ export OS_CACERT=/etc/ssl/certs/ca.crt
-In case you need to provide different configuration parameters to Functest (e.g.
-commit IDs or branches for the repositories, ...) copy the **config_functest.yaml**
-from the repository to your current directory and run the container with a volume::
-
- wget https://git.opnfv.org/cgit/functest/plain/testcases/config_functest.yaml
-
- <modify the file accordingly>
-
- docker run -ti -e \
- "INSTALLER_TYPE=fuel" -e "INSTALLER_IP=10.20.0.2" \
- opnfv/functest:brahmaputra.1.0 \
- -v $(pwd)/config_functest.yaml:/home/opnfv/repos/functest/ci/config_functest.yaml \
- /bin/bash\
-
-However, this is not recommended since most of the test cases rely on static
-parameters read from this file, and changing them might cause problems.
+Certificate verification can be turned off using OS_INSECURE=true. For example,
+Fuel uses self-signed cacerts by default, so an pre step would be::
+ export OS_INSECURE=true
Proxy support
-------------
+If your Jumphost node is operating behind a http proxy, then there are 2 places
+where some special actions may be needed to make operations succeed:
+
+ #. Initial installation of docker engine First, try following the official
+ Docker documentation for Proxy_ settings. Some issues were experienced on
+ CentOS 7 based Jumphost. Some tips are documented in section:
+ `Docker Installation on CentOS 7 behind http proxy`_ below.
+
+ #. Execution of the Functest environment preparation inside the created
+ docker container Functest needs internet access to download some resources
+ for some test cases. For example to install the Rally environment. This might
+ not work properly if the Jumphost is running through a http Proxy.
+
+If that is the case, make sure the resolv.conf and the needed http_proxy and
+https_proxy environment variables, as well as the 'no_proxy' environment
+variable are set correctly::
+
+ # Make double sure that the 'no_proxy=...' line in the
+ # 'openstack.creds' file is commented out first. Otherwise, the
+ # values set into the 'no_proxy' environment variable below will
+ # be ovewrwritten, each time the command
+ # 'source ~/functest/conf/openstack.creds' is issued.
+
+ sed -i 's/export no_proxy/#export no_proxy/' \
+ ~/functest/conf/openstack.creds
+
+ source ~/functest/conf/openstack.creds
+
+ # Next calculate some IP addresses for which http_proxy
+ # usage should be excluded:
+
+ publicURL_IP=$(echo $OS_AUTH_URL| \
+ grep -Eo "([0-9]+\.){3}[0-9]+")
+
+ adminURL_IP=$(openstack catalog show identity | \
+ grep adminURL | grep -Eo "([0-9]+\.){3}[0-9]+")
+
+ export http_proxy="<your http proxy settings>"
+ export https_proxy="<your httpsproxy settings>"
+ export no_proxy="127.0.0.1,localhost,$publicURL_IP,$adminURL_IP"
+
+ # Ensure that "git" uses the http_proxy
+ # This may be needed if your firewall forbids SSL based git fetch
+ git config --global http.sslVerify True
+ git config --global http.proxy <Your http proxy settings>
+
+Validation check: Before running **'functest env prepare'** CLI command,
+make sure you can reach http and https sites from inside the Functest docker
+container.
+
+For example, try to use the **nc** command from inside the functest docker
+container::
+
+ nc -v google.com 80
+ Connection to google.com 80 port [tcp/http] succeeded!
+
+ nc -v google.com 443
+ Connection to google.com 443 port [tcp/https] succeeded!
+
+Note: In a Jumphost node based on the CentOS 7, enviroment, it was observed that
+the **nc** commands did not function as described in the section above. You can
+however try using the **curl** command instead, if you encounter any issues
+with the **nc** command::
+
+ curl http://www.google.com:80
+
+ <HTML><HEAD><meta http-equiv="content-type"
+ content="text/html;charset=utf-8">
+ <TITLE>302 Moved</TITLE>
+ </HEAD>
+ <BODY>
+ <H1>302 Moved</H1>
+ :
+ :
+ </BODY></HTML>
+
+ curl https://www.google.com:443
+
+ <HTML><HEAD><meta http-equiv="content-type"
+ content="text/html;charset=utf-8">
+ <TITLE>302 Moved</TITLE>
+ </HEAD>
+ <BODY>
+ <H1>302 Moved</H1>
+ :
+ :
+ </BODY></HTML>
+
+ (Even Google complained the URL used, it proves the http and https
+ protocols are working correctly through the http / https proxy.)
+
+Docker Installation on CentOS 7 behind http proxy
+-------------------------------------------------
+There are good instructions in [`InstallDockerCentOS7`_] for the installation
+of **docker** on CentOS 7. However, if your Jumphost is behind a http proxy,
+then the following steps are needed **before** following the instructions in
+the above reference::
+
+ 1) # Make a directory '/etc/systemd/system/docker.service.d'
+ # if it does not exist
+ sudo mkdir /etc/systemd/system/docker.service.d
+
+ # Create a file called 'env.conf' in that directory with
+ # the following contents:
+ [Service]
+ EnvironmentFile=-/etc/sysconfig/docker
+
+ 2) # Set up a file called 'docker' in directory '/etc/sysconfig'
+ # with the following contents:
+
+ HTTP_PROXY="<Your http proxy settings>"
+ HTTPS_PROXY="<Your https proxy settings>"
+ http_proxy="${HTTP_PROXY}"
+ https_proxy="${HTTPS_PROXY}"
+
+ 3) # Reload the daemon
+ systemctl daemon-reload
+
+ 4) # Sanity check - check the following docker settings:
+ systemctl show docker | grep -i env
-Functest needs internet access to download some resources for some test cases.
-For example to install the Rally environment. This might not work properly if
-the Jumphost is running through a Proxy.
-
-If that is the case, make sure the resolv.conf and the needed proxy environment
-variables are properly set::
-
- export http_proxy=<your http proxy settings>
- export https_proxy=<your https proxy settings>
-
-Or refer to the official Docker documentation for Proxy_ settings.
-
-Before running **prepare_env.sh** make sure you can ping http and https sites
-inside the container. For example::
-
- nc -v google.com 80
- Connection to google.com 80 port [tcp/http] succeeded!
-
- nc -v google.com 443
- Connection to google.com 443 port [tcp/https] succeeded!
-
+ Expected result:
+ ----------------
+ EnvironmentFile=/etc/sysconfig/docker (ignore_errors=yes)
+ DropInPaths=/etc/systemd/system/docker.service.d/env.conf
+Now follow the instructions in [`InstallDockerCentOS7`_] to download and
+install the **docker-engine**. The instructions conclude with a "test pull"
+of a sample "Hello World" docker container. This should now work with the
+above pre-requisite actions.
.. _dockerdocs: https://docs.docker.com/
.. _dockerhub: https://hub.docker.com/r/opnfv/functest/
.. _Proxy: https://docs.docker.com/engine/admin/systemd/#http-proxy
+.. _FunctestDockerTags: https://hub.docker.com/r/opnfv/functest/tags/
+.. _InstallDockerCentOS7: https://docs.docker.com/engine/installation/linux/centos/
+.. _OPNFV_FuncTestUserGuide: http://artifacts.opnfv.org/functest/docs/userguide/index.html
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
index 411f68d68..7c8113e16 100644
--- a/docs/configguide/index.rst
+++ b/docs/configguide/index.rst
@@ -11,13 +11,14 @@ OPNFV FUNCTEST Configuration Guide
Introduction
============
-
This document describes how to install and configure Functest in OPNFV.
+The Functest CLI is utilized during the Functest environment preparation step.
High level architecture
-----------------------
-The high level architecture of Functest within OPNFV can be described as follows::
+The high level architecture of Functest within OPNFV can be described as
+follows::
CIMC/Lights+out management Admin Private Public Storage
PXE
@@ -70,61 +71,66 @@ The high level architecture of Functest within OPNFV can be described as follows
| | | | | 5 +---------------+ | | |
| +-+ | | nodes for | | | | |
| | | | deploying +-------------------------+ | |
- | +-+ | opnfv | | | | |
- | | | SUT +-----------------------------------+ |
- | +-+ | | | | |
+ | +-+ | OPNFV | | | | |
+ | | | +-----------------------------------+ |
+ | +-+ SUT | | | | |
| | +--------------------------------------------+
| +----------------+ | | | |
| | | | |
- | + + + +
+ + + + + +
+ SUT = System Under Test
-All the libraries and dependencies needed by all the Functest tools are
-pre-installed in the Docker image.
-This allows running Functest on any platform on any Operating System.
+All the libraries and dependencies needed by all of the Functest tools are
+pre-installed into the Docker image. This allows running Functest on any
+platform on any Operating System.
The automated mechanisms inside the Functest Docker container will:
* retrieve OpenStack credentials
* prepare the environment according to the SUT
- * perform the appropriate tests
- * push the results into the OPNFV test result database
-
+ * perform the appropriate functional tests
+ * push the test results into the OPNFV test result database
This Docker image can be integrated into CI or deployed independently.
-Please note that the Functest container has been designed for OPNFV, however, it
-would be possible to adapt it to any VIM+controller environment since most of the
-test cases are integrated from upstream communities.
+Please note that the Functest Docker container has been designed for OPNFV,
+however, it would be possible to adapt it to any VIM+controller environment,
+since most of the test cases are integrated from upstream communities.
The test cases are described in the Functest User Guide `[2]`_
Prerequisites
=============
-
-The OPNFV deployment is out of the scope of this document but it can be found in
-`[4]`_. The OPNFV platform is considered as the System Under Test (SUT) in this
-document.
+The OPNFV deployment is out of the scope of this document but it can be found
+in `[4]`_. The OPNFV platform is considered as the System Under Test (SUT) in
+this document.
Several prerequisites are needed for Functest:
#. A Jumphost to run Functest on
- #. Docker daemon shall be installed on the Jumphost
+ #. A Docker daemon shall be installed on the Jumphost
#. A public/external network created on the SUT
+ #. An admin/management network created on the SUT
#. Connectivity from the Jumphost to the SUT public/external network
- #. Connectivity from the Jumphost to the SUT management network
+ #. Connectivity from the Jumphost to the SUT admin/management network
-NOTE: “Jumphost” refers to any server which meets the previous requirements.
+NOTE: **Jumphost** refers to any server which meets the previous requirements.
Normally it is the same server from where the OPNFV deployment has been
triggered previously.
Docker installation
-------------------
-
.. _Ubuntu: https://docs.docker.com/installation/ubuntulinux/
.. _RHEL: https://docs.docker.com/installation/rhel/
+.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/
-Log on your Jumphost and install docker (e.g. for Ubuntu)::
+*Tip:* If your Jumphost is operating behind a company http proxy and/or
+Firewall, please consult first the section `Proxy Support`_, towards the end
+of this document. The section details some tips/tricks which *may* be of help
+in a proxified environment.
+
+Log on to your Jumphost and install the Docker Engine (e.g. for Ubuntu)::
curl -sSL https://get.docker.com/ | sh
@@ -136,42 +142,50 @@ A reconnect is needed. There are 2 ways for this:
#. Re-login to your account
#. su - <username>
-References:
+If your Jumphost is based on Red Hat Enterprise Linux, or CentOS 7 linux,
+please consult the references below.
+
+References - Installing Docker Engine on different Linux Operating Systems:
* Ubuntu_
* RHEL_
-
-External network on SUT
------------------------
-
-Some of the tests against the VIM (Virtual Infrastructure Manager) need an
-existing public network to succeed. This is needed, for example, to create
-floating IPs to access instances from the public network (i.e. Docker container).
-
-By default, the four OPNFV installers provide a fresh installation with
-an external network created along with a router. Make sure that subnet
-is reachable from the Jumphost
-
-
-Connectivity to OPNFV management network
-----------------------------------------
-
-Some of the Functest tools need to have access to the OpenStack management
+ * CentOS_
+
+Public/External network on SUT
+------------------------------
+Some of the tests against the VIM (Virtual Infrastructure Manager) need
+connectivity through an existing public/external network in order to succeed.
+This is needed, for example, to create floating IPs to access VM instances
+through the public/external network (i.e. from the Docker container).
+
+By default, the four OPNFV installers provide a fresh installation with a
+public/external network created along with a router. Make sure that the
+public/external subnet is reachable from the Jumphost.
+
+*Hint:* For the given OPNFV Installer in use, the IP sub-net address used for
+the public/external network is usually a planning item and should thus be known.
+Consult the OPNFV Configuration guide `[4]`_, and ensure you can reach each
+node in the SUT, from the Jumphost using the 'ping' command using the
+respective IP address on the public/external network for each node in the SUT.
+(The details of how to determine the needed IP addresses for each node in the
+SUT may vary according to the used installer and are therefore ommitted here.)
+
+Connectivity to OPNFV admin/management network
+----------------------------------------------
+Some of the Functest tools need to have access to the OpenStack admin/management
network of the controllers `[1]`_.
-For this reason, an interface shall be configured in the Jumphost in the
-OpenStack management network range.
+For this reason, an interface shall be configured in the Jumphost in the OpenStack admin/management network range.
-For example, if the management network is on VLAN 300 and subnet 192.168.1.0/24
-and assuming that eth1 is the physical interface with access to that subnet::
+For example, if the admin/management network is using VLAN 300 and subnet 192.168.1.0/24 and assuming that eth1 is the
+physical interface with access to that subnet::
ip link add name eth1.300 link eth1 type vlan id 300
ip link set eth1.300 up
ip addr add 192.168.1.66/24 dev eth1.300
-This is just an example about how to configure an interface with vlan, but it might
-differ depending on the deployment settings on each installer. Check the
-corresponding installer instructions for more info.
+This is just an example about how to configure an interface with vlan, but it might differ depending on the deployment
+settings on each installer. Check the corresponding installer instructions for more precise instructions.
Installation and configuration
@@ -179,10 +193,8 @@ Installation and configuration
.. include:: ./configguide.rst
-
Integration in CI
=================
-
In CI we use the Docker image and execute the appropriate commands within the
container from Jenkins.
@@ -245,7 +257,6 @@ Docker clean in functest-cleanup builder `[3]`_::
fi
-
References
==========
.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
@@ -262,7 +273,3 @@ IRC support channel: #opnfv-testperf
.. _opnfvmain: http://www.opnfv.org
.. _opnfvfunctest: https://wiki.opnfv.org/opnfv_functional_testing
-.. _`OpenRC`: http://docs.openstack.org/user-guide/common/cli_set_environment_variables_using_openstack_rc.html
-.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html
-.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py
-.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml
diff --git a/docs/devguide/index.rst b/docs/devguide/index.rst
index 210774be6..cda38e0ed 100644
--- a/docs/devguide/index.rst
+++ b/docs/devguide/index.rst
@@ -301,7 +301,7 @@ page `[3]`_.
Overall Architecture
====================
-The Test result management in Brahmaputra can be summarized as follows::
+The Test result management can be summarized as follows::
+-------------+ +-------------+ +-------------+
| | | | | |
@@ -314,7 +314,7 @@ The Test result management in Brahmaputra can be summarized as follows::
+-----------------------------------------+
| |
| Test Rest API front end |
- | http://testresults.opnfv.org/testapi |
+ | http://testresults.opnfv.org/test |
| |
+-----------------------------------------+
A |
@@ -333,24 +333,16 @@ The Test result management in Brahmaputra can be summarized as follows::
| |
+----------------------+
-The Test dashboard URL is: TODO LF
-A alternate Test dashboard has been realized to provide a view per installer and
-per scenario for Brahmaputra release::
-
- http://testresults.opnfv.org/proto/brahma/
-
-This Dashboard consumes the results retrieved thanks to the Test API.
-
Test API description
====================
The Test API is used to declare pods, projects, test cases and test results. An
-additional method dashboard has been added to post-process the raw results. The
-data model is very basic, 4 objects are created:
+additional method dashboard has been added to post-process the raw results in release Brahmaputra.
+The data model is very basic, 4 objects are created:
* Pods
- * Test projects
- * Test cases
- * Test results
+ * Projects
+ * Testcases
+ * Results
Pods::
@@ -359,10 +351,11 @@ Pods::
"details": <URL description of the POD>,
"creation_date": YYYY-MM-DD HH:MM:SS ,
"name": <The POD Name>,
- "mode": <metal or virtual>
+ "mode": <metal or virtual>,
+ "role": <ci-pod or community-pod or single-node>
},
-Test project::
+Projects::
{
"id": <ID>,
@@ -371,185 +364,246 @@ Test project::
"description": <Short description>
},
-Test case::
+Testcases::
{
"id": <ID>,
"name":<Name of the test case>,
+ "project_name":<Name of belonged project>,
"creation_date": "YYYY-MM-DD HH:MM:SS",
"description": <short description>,
"url":<URL for longer description>
},
-Test results::
+Results::
{
"_id": <ID,
+ "case_name": <Reference to the test case>
"project_name": <Reference to project>,
"pod_name": <Reference to POD where the test was executed>,
- "version": <Scenario on which the test was executed>,
"installer": <Installer Apex or Compass or Fuel or Joid>,
- "description": <Short description>,
- "creation_date": "YYYY-MM-DD HH:MM:SS",
- "case_name": <Reference to the test case>
- "details":{
- <- the results to be put here ->
- }
-
+ "version": <master or Colorado or Brahmaputra>,
+ "start_date": "YYYY-MM-DD HH:MM:SS",
+ "stop_date": "YYYY-MM-DD HH:MM:SS",
+ "build_tag": <such as "jenkins-functest-fuel-baremetal-daily-master-108">,
+ "scenario": <Scenario on which the test was executed>,
+ "criteria": <PASS or FAILED>,
+ "trust_indicator": <0 ~ 1>
-For Brahmaputra, we got:
+The API can described as follows. For detailed information, please go to
+http://testresults.opnfv.org/test/swagger/spec.html
- * 16 pods
- * 18 projects
- * 101 test cases
+Authentication: opnfv/api@opnfv
-The projects and the test cases have been frozen in December.
-But all were not ready for Brahmaputra.
-
-
-
-The API can described as follows:
+Please notes that POST/DELETE/PUT operations for test or study purpose via
+swagger website is not allowed, because it will change the real data in
+the database.
Version:
+--------+--------------------------+-----------------------------------------+
| Method | Path | Description |
+========+==========================+=========================================+
- | GET | /version | Get API version |
+ | GET | /versions | Get all supported API versions |
+--------+--------------------------+-----------------------------------------+
Pods:
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /pods | Get the list of declared Labs (PODs) |
- +--------+--------------------------+-----------------------------------------+
- | POST | /pods | Declare a new POD |
- | | | Content-Type: application/json |
- | | | { |
- | | | "name": "pod_foo", |
- | | | "creation_date": "YYYY-MM-DD HH:MM:SS" |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
+ +--------+----------------------------+-----------------------------------------+
+ | Method | Path | Description |
+ +========+============================+=========================================+
+ | GET | /api/v1/pods | Get the list of declared Labs (PODs) |
+ +--------+----------------------------+-----------------------------------------+
+ | POST | /api/v1/pods | Declare a new POD |
+ | | | Content-Type: application/json |
+ | | | { |
+ | | | "name": "pod_foo", |
+ | | | "mode": "metal", |
+ | | | "role": "ci-pod", |
+ | | | "details": "it is a ci pod" |
+ | | | } |
+ +--------+----------------------------+-----------------------------------------+
+ | GET | /api/v1/pods/{pod_name} | Get a declared POD |
+ +--------+----------------------------+-----------------------------------------+
Projects:
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /test_projects | Get the list of test projects |
- +--------+--------------------------+-----------------------------------------+
- | GET |/test_projects/{project} | Get details on {project} |
- | | | |
- +--------+--------------------------+-----------------------------------------+
- | POST | /test_projects | Add a new test project |
- | | | Content-Type: application/json |
- | | | { |
- | | | "name": "project_foo", |
- | | | "description": "whatever you want" |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | PUT | /test_projects/{project} | Update a test project |
- | | | |
- | | | Content-Type: application/json |
- | | | { |
- | | | <the field(s) you want to modify> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | DELETE | /test_projects/{project} | Delete a test project |
- +--------+--------------------------+-----------------------------------------+
+ +--------+----------------------------+-----------------------------------------+
+ | Method | Path | Description |
+ +========+============================+=========================================+
+ | GET | /api/v1/projects | Get the list of declared projects |
+ +--------+----------------------------+-----------------------------------------+
+ | POST | /api/v1/projects | Declare a new test project |
+ | | | Content-Type: application/json |
+ | | | { |
+ | | | "name": "project_foo", |
+ | | | "description": "whatever you want" |
+ | | | } |
+ +--------+----------------------------+-----------------------------------------+
+ | DELETE | /api/v1/projects/{project} | Delete a test project |
+ +--------+----------------------------+-----------------------------------------+
+ | GET | /api/v1/projects/{project} | Get details on a {project} |
+ | | | |
+ +--------+----------------------------+-----------------------------------------+
+ | PUT | /api/v1/projects/{project} | Update a test project |
+ | | | |
+ | | | Content-Type: application/json |
+ | | | { |
+ | | | <the field(s) you want to modify> |
+ | | | } |
+ +--------+----------------------------+-----------------------------------------+
+
+
+Testcases:
+
+ +--------+----------------------------+-----------------------------------------+
+ | Method | Path | Description |
+ +========+============================+=========================================+
+ | GET | /api/v1/projects/{project}/| Get the list of testcases of {project} |
+ | | cases | |
+ +--------+----------------------------+-----------------------------------------+
+ | POST | /api/v1/projects/{project}/| Add a new test case to {project} |
+ | | cases | Content-Type: application/json |
+ | | | { |
+ | | | "name": "case_foo", |
+ | | | "description": "whatever you want" |
+ | | | "url": "whatever you want" |
+ | | | } |
+ +--------+----------------------------+-----------------------------------------+
+ | DELETE | /api/v1/projects/{project}/| Delete a test case |
+ | | cases/{case} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET | /api/v1/projects/{project}/| Get a declared test case |
+ | | cases/{case} | |
+ +--------+----------------------------+-----------------------------------------+
+ | PUT | /api/v1/projects/{project}?| Modify a test case of {project} |
+ | | cases/{case} | |
+ | | | Content-Type: application/json |
+ | | | { |
+ | | | <the field(s) you want to modify> |
+ | | | } |
+ +--------+----------------------------+-----------------------------------------+
+
+Results:
+
+ +--------+----------------------------+------------------------------------------+
+ | Method | Path | Description |
+ +========+============================+==========================================+
+ | GET | /api/v1/results | Get all the test results |
+ +--------+----------------------------+------------------------------------------+
+ | POST | /api/v1/results | Add a new test results |
+ | | | Content-Type: application/json |
+ | | | { |
+ | | | "project_name": "project_foo", |
+ | | | "scenario": "odl-l2", |
+ | | | "stop_date": "2016-05-28T14:42:58.384Z", |
+ | | | "trust_indicator": 0.5, |
+ | | | "case_name": "vPing", |
+ | | | "build_tag": "", |
+ | | | "version": "Colorado", |
+ | | | "pod_name": "pod_foo", |
+ | | | "criteria": "PASS", |
+ | | | "installer": "fuel", |
+ | | | "start_date": "2016-05-28T14:41:58.384Z",|
+ | | | "details": <your results> |
+ | | | } |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of {case} |
+ | | case={case} | |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of build_tag |
+ | | build_tag={tag} | {tag}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get last {N} records of test results |
+ | | last={N} | |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of scenario |
+ | | scenario={scenario} | {scenario}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of trust_indicator |
+ | | trust_indicator={ind} | {ind}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of last days |
+ | | period={period} | {period}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of {project} |
+ | | project={project} | |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of version |
+ | | version={version} | {version}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of criteria |
+ | | criteria={criteria} | {criteria}. |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | get the results on pod {pod} |
+ | | pod={pod} | |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the test results of installer {inst} |
+ | | installer={inst} | |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results? | Get the results according to combined |
+ | | <query conditions> | query conditions supported above |
+ +--------+----------------------------+------------------------------------------+
+ | GET | /api/v1/results/{result_id}| Get the test result by result_id |
+ +--------+----------------------------+------------------------------------------+
-Test cases:
-
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET | /test_projects/{project}/| Get the list of test cases of {project} |
- | | cases | |
- +--------+--------------------------+-----------------------------------------+
- | POST | /test_projects/{project}/| Add a new test case to {project} |
- | | cases | Content-Type: application/json |
- | | | { |
- | | | "name": "case_foo", |
- | | | "description": "whatever you want" |
- | | | "creation_date": "YYYY-MM-DD HH:MM:SS" |
- | | | "url": "whatever you want" |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | PUT | /test_projects/{project}?| Modify a test case of {project} |
- | | case_name={case} | |
- | | | Content-Type: application/json |
- | | | { |
- | | | <the field(s) you want to modify> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
- | DELETE | /test_projects/{project}/| Delete a test case |
- | | case_name={case} | |
- +--------+--------------------------+-----------------------------------------+
-
-Test Results:
+Dashboard:
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET |/results/project={project}| Get the test results of {project} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results/case={case} | Get the test results of {case} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?pod={pod} | get the results on pod {pod} |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?installer={inst} | Get the test results of installer {inst}|
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?version={version}| Get the test results of scenario |
- | | | {version}. Initially the version param |
- | | | was reflecting git version, in Functest |
- | | | it was decided to move to scenario |
- +--------+--------------------------+-----------------------------------------+
- | GET |/results?project={project}| Get all the results of the test case |
- | |&case={case} | {case} of the project {project} with |
- | |&version={scenario} | version {scenario} installed by |
- | |&installer={installer} | {installer} on POD {pod} stored since |
- | |&pod={pod} | {days} days |
- | | | {project_name} and {case_name} are |
- | |&period={days} | mandatory, the other parameters are |
- | | | optional. |
- +--------+--------------------------+-----------------------------------------+
- | POST | /results | Add a new test results |
- | | | Content-Type: application/json |
- | | | { |
- | | | "project_name": "project_foo", |
- | | | "case_name": "case_foo", |
- | | | "pod_name": "pod_foo", |
- | | | "installer": "installer_foo", |
- | | | "version": "scenario_foo", |
- | | | "details": <your results> |
- | | | } |
- +--------+--------------------------+-----------------------------------------+
+ +--------+----------------------------+-----------------------------------------+
+ | Method | Path | Description |
+ +========+============================+=========================================+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | version {version} |
+ | |&version={version} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | since {days} days |
+ | |&period={days} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | installed by {installer} |
+ | |&installer={installer} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | on POD {pod} |
+ | |&pod={pod} | |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/results? | Get all the dashboard ready results of |
+ | |&project={project} | {case} of the project {project} |
+ | |&case={case} | and combined by other query conditions |
+ | |&<query conditions> | supported above. |
+ +--------+----------------------------+-----------------------------------------+
+ | GET |/dashboard/v1/projects? | Get all the dashboard ready projects |
+ +--------+----------------------------+-----------------------------------------+
+
+Dashboard description
+=====================
+The results with dashboard method are post-processed from raw results.
+Please note that dashboard results are not stored. Only raw results are stored.
-Dashboard:
+Release Brahmaputra
+-------------------
- +--------+--------------------------+-----------------------------------------+
- | Method | Path | Description |
- +========+==========================+=========================================+
- | GET |/dashboard? | Get all the dashboard ready results of |
- | |&project={project} | {case} of the project {project} |
- | |&case={case} | version {scenario} installed by |
- | |&version={scenario} | {installer} on POD {pod} stored since |
- | |&installer={installer} | {days} days |
- | |&pod={pod} | |
- | |&period={days} | {project_name} and {case_name} are |
- | | | mandatory, the other parameters are |
- | | | optional. |
- +--------+--------------------------+-----------------------------------------+
+Dashboard url: http://testresults.opnfv.org/dashboard/
+Release Colorado
+----------------
-The results with dashboard method are post-processed from raw results.
-Please note that dashboard results are not stored. Only raw results are stored.
+Dashboard url: http://testresults.opnfv.org/kibana_dashboards/
+Credentials for a guest account: opnfvuser/kibana
===============================================
How to push your results into the Test Database