diff options
Diffstat (limited to 'docs/userguide/troubleshooting.rst')
| -rw-r--r-- | docs/userguide/troubleshooting.rst | 298 |
1 files changed, 259 insertions, 39 deletions
diff --git a/docs/userguide/troubleshooting.rst b/docs/userguide/troubleshooting.rst index f669025ff..5c56ec157 100644 --- a/docs/userguide/troubleshooting.rst +++ b/docs/userguide/troubleshooting.rst @@ -1,53 +1,226 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 Troubleshooting =============== +This section gives some guidelines about how to troubleshoot the test cases +owned by Functest. + +**IMPORTANT**: As in the previous section, the steps defined below must be +executed inside the Functest Docker container and after sourcing the OpenStack credentials:: + + . $creds + +or:: + + source /home/opnfv/functest/conf/openstack.creds + VIM --- +This section covers the test cases related to the VIM (vPing, Tempest, Rally). + +vPing common +^^^^^^^^^^^^ +For both vPing test cases (**vPing_ssh**, and **vPing_userdata**), the first steps are +similar: + + * Create Glance image + * Create Network + * Create Security Group + * Create instances + +After these actions, the test cases differ and will be explained in their respective section. + +These test cases can be run inside the container as follows:: + + $repos_dir/functest/docker/run_tests.sh -t vping_ssh + $repos_dir/functest/docker/run_tests.sh -t vping_userdata + +The **run_tests.sh** script is basically calling internally the corresponding +vPing scripts, located in +*$repos_dir/functest/testcases/vPing/CI/libraries/vPing_ssh.py* and +*$repos_dir/functest/testcases/vPing/CI/libraries/vPing_userdata.py* with the +appropriate flags. + +After finishing the test execution, the corresponding script will remove all +created resources in OpenStack (image, instances, network and security group). +When troubleshooting, it is advisable sometimes to keep those resources in case the +test fails and a manual testing is needed. This can be achieved by adding the flag *-n*:: + + $repos_dir/functest/docker/run_tests.sh -n -t vping_ssh + $repos_dir/functest/docker/run_tests.sh -n -t vping_userdata + + +Some of the common errors that can appear in this test case are:: + + vPing_ssh- ERROR - There has been a problem when creating the neutron network.... + +This means that there has been some problems with Neutron, even before creating the +instances. Try to create manually a Neutron network and a Subnet to see if that works. +The debug messages will also help to see when it failed (subnet and router creation). +Example of Neutron commands (using 10.6.0.0/24 range for example):: + + neutron net-create net-test + neutron subnet-create --name subnet-test --allocation-pool start=10.6.0.2,end=10.6.0.100 --gateway 10.6.0.254 net-test 10.6.0.0/24 + neutron router-create test_router + neutron router-interface-add <ROUTER_ID> test_subnet + neutron router-gateway-set <ROUTER_ID> <EXT_NET_NAME> + +Another related error can occur while creating the Security Groups for the instances:: + + vPing_ssh- ERROR - Failed to create the security group... + +In this case, proceed to create it manually. These are some hints:: + + neutron security-group-create sg-test + neutron security-group-rule-create sg-test --direction ingress --protocol icmp --remote-ip-prefix 0.0.0.0/0 + neutron security-group-rule-create sg-test --direction ingress --ethertype IPv4 --protocol tcp --port-range-min 80 --port-range-max 80 --remote-ip-prefix 0.0.0.0/0 + neutron security-group-rule-create sg-test --direction egress --ethertype IPv4 --protocol tcp --port-range-min 80 --port-range-max 80 --remote-ip-prefix 0.0.0.0/0 + +The next step is to create the instances. The image used is located in +*/home/opnfv/functest/data/cirros-0.3.4-x86_64-disk.img* and a Glance image is created +with the name **functest-vping**. If booting the instances fails (i.e. the status +is not **ACTIVE**), you can check why it failed by doing:: + + nova list + nova show <INSTANCE_ID> + +It might show some messages about the booting failure. To try that manually:: + + nova boot --flavor 2 --image functest-vping --nic net-id=<NET_ID> nova-test + +This will spawn a VM using the network created previously manually. +In all the OPNFV tested scenarios from CI, it never has been a problem with the +previous actions. Further possible problems are explained in the following sections. + + vPing_SSH ^^^^^^^^^ +This test case creates a floating IP on the external network and assigns it to +the second instance **opnfv-vping-2**. The purpose of this is to establish +a SSH connection to that instance and SCP a script that will ping the first instance. +This script is located in the repository under +*$repos_dir/functest/testcases/vPing/CI/libraries/ping.sh* and takes an IP as +a parameter. When the SCP is completed, the test will do an SSH call to that script +inside the second instance. Some problems can happen here:: + + vPing_ssh- ERROR - Cannot establish connection to IP xxx.xxx.xxx.xxx. Aborting + +If this is displayed, stop the test or wait for it to finish (if you have used the flag +*-n* in **run_tests.sh** explained previously) so that the test does not clean +the OpenStack resources. It means that the Container can not reach the public +IP assigned to the instance **opnfv-vping-2**. There are many possible reasons, and +they really depend on the chosen scenario. For most of the ODL-L3 and ONOS scenarios +this has been noticed and it is a known limitation. + +First, make sure that the instance **opnfv-vping-2** succeeded to get an IP from +the DHCP agent. It can be checked by doing:: + + nova console-log opnfv-vping-2 + +If the message *Sending discover* and *No lease, failing* is shown, it probably +means that the Neutron dhcp-agent failed to assign an IP or even that it was not +responding. At this point it does not make sense to try to ping the floating IP. + +If the instance got an IP properly, try to ping manually the VM from the container:: + + nova list + <grab the public IP> + ping <public IP> + +If the ping does not return anything, try to ping from the Host where the Docker +container is running. If that solves the problem, check the iptable rules because +there might be some rules rejecting ICMP or TCP traffic coming/going from/to the container. + +At this point, if the ping does not work either, try to reproduce the test +manually with the steps described above in the vPing common section with the addition:: + + neutron floatingip-create <EXT_NET_NAME> + nova floating-ip-associate nova-test <FLOATING_IP> + + +Further troubleshooting is out of scope of this document, as it might be due to +problems with the SDN controller. Contact the installer team members or send an +email to the corresponding OPNFV mailing list for more information. -vPing should work on all the scenarios. In case of timeout, check your network -connectivity. The test case creates its own security group to allow SSH access, -check your network settings and your security rules. vPing_userdata ^^^^^^^^^^^^^^ +This test case does not create any floating IP neither establishes an SSH +connection. Instead, it uses nova-metadata service when creating an instance +to pass the same script as before (ping.sh) but as 1-line text. This script +will be executed automatically when the second instance **opnfv-vping-2** is booted. + +The only known problem here for this test to fail is mainly the lack of support +of cloud-init (nova-metadata service). Check the console of the instance:: + + nova console-log opnfv-vping-2 + +If this text or similar is shown:: + + checking http://169.254.169.254/2009-04-04/instance-id + failed 1/20: up 1.13. request failed + failed 2/20: up 13.18. request failed + failed 3/20: up 25.20. request failed + failed 4/20: up 37.23. request failed + failed 5/20: up 49.25. request failed + failed 6/20: up 61.27. request failed + failed 7/20: up 73.29. request failed + failed 8/20: up 85.32. request failed + failed 9/20: up 97.34. request failed + failed 10/20: up 109.36. request failed + failed 11/20: up 121.38. request failed + failed 12/20: up 133.40. request failed + failed 13/20: up 145.43. request failed + failed 14/20: up 157.45. request failed + failed 15/20: up 169.48. request failed + failed 16/20: up 181.50. request failed + failed 17/20: up 193.52. request failed + failed 18/20: up 205.54. request failed + failed 19/20: up 217.56. request failed + failed 20/20: up 229.58. request failed + failed to read iid from metadata. tried 20 + +it means that the instance failed to read from the metadata service. Contact +the Functest or installer teams for more information. + +NOTE: Cloud-init in not supported on scenario dealing with ONOS and the tests have been +excluded from CI in those scenarios. -Cloud-init in not supported on scenario dealing with ONOS. Tempest ^^^^^^^ In the upstream OpenStack CI all the Tempest test cases are supposed to pass. If some test cases fail in an OPNFV deployment, the reason is very probably one -of the following:: - - +-----------------------------+------------------------------------------------+ - | Error | Details | - +=============================+================================================+ - | Resources required for test | Such resources could be e.g. an external | - | case execution are missing | network and access to the management subnet | - | | (adminURL) from the Functest docker container. | - +-----------------------------+------------------------------------------------+ - | OpenStack components or | Check running services in the controller and | - | services are missing or not | compute nodes (e.g. with "systemctl" or | - | configured properly | "service" commands). Configuration parameters | - | | can be verified from related .conf files | - | | located under /etc/<component> directories. | - +-----------------------------+------------------------------------------------+ - | Some resources required for | The tempest.conf file, automatically generated | - | execution test cases are | by Rally in Functest, does not contain all the | - | missing | needed parameters or some parameters are not | - | | set properly. | - | | The tempest.conf file is located in /home/opnfv| - | | /.rally/tempest/for-deployment-<UUID> in | - | | Functest container | - | | Use "rally deployment list" command in order to| - | | check UUID of current deployment. | - +-----------------------------+------------------------------------------------+ +of the following + ++-----------------------------+------------------------------------------------+ +| Error | Details | ++=============================+================================================+ +| Resources required for test | Such resources could be e.g. an external | +| case execution are missing | network and access to the management subnet | +| | (adminURL) from the Functest docker container. | ++-----------------------------+------------------------------------------------+ +| OpenStack components or | Check running services in the controller and | +| services are missing or not | compute nodes (e.g. with "systemctl" or | +| configured properly | "service" commands). Configuration parameters | +| | can be verified from related .conf files | +| | located under /etc/<component> directories. | ++-----------------------------+------------------------------------------------+ +| Some resources required for | The tempest.conf file, automatically generated | +| execution test cases are | by Rally in Functest, does not contain all the | +| missing | needed parameters or some parameters are not | +| | set properly. | +| | The tempest.conf file is located in /home/opnfv| +| | /.rally/tempest/for-deployment-<UUID> in | +| | Functest container | +| | Use "rally deployment list" command in order to| +| | check UUID of current deployment. | ++-----------------------------+------------------------------------------------+ When some Tempest test case fails, captured traceback and possibly also related @@ -59,7 +232,55 @@ related Rally deployment folder. Rally ^^^^^ -Same error causes than for Tempest mentioned above may lead to error in Rally. +Same error causes than for Tempest mentioned above may lead to errors in Rally. + +It is possible to run only one Rally scenario, instead of the whole suite. +To do that, call the python script (instead of *run_tests.sh*) as follows:: + + python $repos_dir/functest/testcases/VIM/OpenStack/CI/libraries/run_rally-cert.py -h + usage: run_rally-cert.py [-h] [-d] [-r] [-s] [-v] [-n] test_name + + positional arguments: + test_name Module name to be tested. Possible values are : [ + authenticate | glance | cinder | heat | keystone | neutron | + nova | quotas | requests | vm | all ] The 'all' value + performs all possible test scenarios + + optional arguments: + -h, --help show this help message and exit + -d, --debug Debug mode + -r, --report Create json result file + -s, --smoke Smoke test mode + -v, --verbose Print verbose info about the progress + -n, --noclean Don't clean the created resources for this test. + +For example, to run the Glance scenario with debug information:: + + python $repos_dir/functest/testcases/VIM/OpenStack/CI/libraries/run_rally-cert.py -d glance + +Possible scenarios are: + * authenticate + * glance + * cinder + * heat + * keystone + * neutron + * nova + * quotas + * requests + * vm + +To know more about what those scenarios are doing, they are defined in: +*$repos_dir/functest/testcases/VIM/OpenStack/CI/suites*. For more info about +Rally scenario definition please refer to the Rally official documentation. + +If the flag *all* is specified, it will run all the scenarios one by one. Please +note that this might take some time (~1,5hr), taking around 1 hour to complete the +Nova scenario. + +To check any possible problems with rally, the logs are stored under +*/home/opnfv/functest/results/rally/* in the Functest container. + Controllers ----------- @@ -77,11 +298,7 @@ due to wrong return code. ONOS ^^^^ -TODO - -OpenContrail -^^^^^^^^^^^^ - +Please refer to the ONOS documentation. Feature ------- @@ -91,9 +308,9 @@ vIMS vIMS deployment may fail for several reasons, the most frequent ones are described in the following table: -+===================================+====================================+ -| Error | Comments | +-----------------------------------+------------------------------------+ +| Error | Comments | ++===================================+====================================+ | Keystone admin API not reachable | Impossible to create vIMS user and | | | tenant | +-----------------------------------+------------------------------------+ @@ -111,12 +328,15 @@ described in the following table: | SSH connection issue between the | if vPing test fails, vIMS test will| | Test container and the VM | fail... | +-----------------------------------+------------------------------------+ -| No Internet access from a VM | the VMs of the VNF must have an | +| No Internet access from the VM | the VMs of the VNF must have an | | | external access to Internet | +-----------------------------------+------------------------------------+ +| No access to OpenStack API from | Orchestrator can be installed but | +| the VM | the vIMS VNF installation fails | ++-----------------------------------+------------------------------------+ Promise ^^^^^^^ -TODO +Please refer to the Promise documentation. |