diff options
Diffstat (limited to 'docs/configguide')
| -rw-r--r-- | docs/configguide/configguide.rst | 816 | ||||
| -rw-r--r-- | docs/configguide/index.rst | 119 |
2 files changed, 693 insertions, 242 deletions
diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst index c0444c6b0..7c8ce8b8c 100644 --- a/docs/configguide/configguide.rst +++ b/docs/configguide/configguide.rst @@ -5,47 +5,246 @@ Preparing the Docker container ------------------------------ -Pull the Functest Docker image from the Docker hub:: +Pull the Functest Docker image ('opnfv/functest') from the public dockerhub +registry under the OPNFV account: [dockerhub_], with the following docker +command:: - docker pull opnfv/functest:brahmaputra.1.0 + docker pull opnfv/functest:<TagIdentifier> +where <TagIdentifier> identifies a specifically tagged release of the Functest +docker container image in the public dockerhub registry. There are many +different tags created automatically by the CI mechanisms, but you must ensure +you pull an image with the **correct tag** to match the OPNFV software release +installed in your environment. All available tagged images can be seen from +location [FunctestDockerTags_]. For example, when running on the first official +release of the OPNFV Colorado system platform, tag "colorado.1.0" is needed. +Pulling other tags might cause some problems while running the tests. If you +need to specifically pull the latest Functest docker image, then omit the tag +argument:: -Check that the image is available:: - docker images + docker pull opnfv/functest -Run the docker container giving the environment variables: +After pulling the Docker image, check that the pulled image is available with +the following docker command:: - * **INSTALLER_TYPE** : possible values are **apex**, **compass**, **fuel** or **joid**. - * **INSTALLER_IP** : IP of the installer node/VM. - -Functest may need to know the IP of the installer to retrieve automatically the -credentials from the installer node/VM or even from the actual controllers. - -The minimum command to create the Functest Docker container can be described as -follows:: + [functester@jumphost ~]$ docker images - docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash + REPOSITORY TAG IMAGE ID CREATED SIZE + opnfv/functest latest 8cd6683c32ae 2 weeks ago 1.611 GB + opnfv/functest brahmaputra.3.0 94b78faa94f7 4 weeks ago 874.9 MB + hello-world latest 94df4f0ce8a4 7 weeks ago 967 B -Optionally, it is possible to precise the container name through the option -**--name**:: + (Docker images pulled without a tag specifier bear the implicitly + assigned label "latest", as seen above.) - docker run --name "CONTAINER_NAME" -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash +The Functest docker container environment can -in principle- be also used with +non-OPNFV official installers (e.g. 'devstack), with the **disclaimer** that +support for such environments is outside of the scope of responsibility of the +OPNFV project. -It is also possible to to indicate the path of the OpenStack credentials using **-v**:: +The minimum command to create the Functest Docker container can be described as +follows:: - docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds opnfv/functest:brahmaputra.1.0 /bin/bash + docker run -it opnfv/functest:<TagIdentifier> /bin/bash -The local file will be mounted in the container under -*/home/opnfv/functest/conf/openstack.creds* +For OPNFV official installers, it is recommended (although no longer mandatory) +to provide two additional environment variables, in the 'docker run ...' +command nvocation: -If the intention is to run Functest against any of the supported OPNFV scenarios, -it is recommended to include also the environment variable **DEPLOY_SCENARIO**, -for example:: + * **INSTALLER_TYPE** : possible values are **apex**, **compass**, **fuel** or + **joid**. + * **INSTALLER_IP** : IP of the installer node/VM. - docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -e "DEPLOY_SCENARIO=os-odl_l2-nofeature-ha" opnfv/functest:brahmaputra.1.0 /bin/bash +Functest may need to know the IP of the installer to retrieve automatically the +credentials from the installer node/VM or even from the actual controllers. -Inside the container, the following directory structure should be in place:: +Thus, the recommended minimum command to create the Functest Docker container +for OPNFV installer can be described (using installer 'fuel', and an invented +INSTALLER_IP of '10.20.0.2', for example), as follows:: + + docker run -it \ + -e "INSTALLER_IP=10.20.0.2" \ + -e "INSTALLER_TYPE=fuel" \ + opnfv/functest:<TagIdentifier> /bin/bash + +Optionally, it is possible to assign precisely a container name through the +**--name** option:: + + docker run --name "CONTAINER_NAME" -it \ + -e "INSTALLER_IP=10.20.0.2" \ + -e "INSTALLER_TYPE=fuel" \ + opnfv/functest:<TagIdentifier> /bin/bash + +It is also possible to to indicate the path of the OpenStack credentials using a +**-v** option:: + + docker run -it \ + -e "INSTALLER_IP=10.20.0.2" \ + -e "INSTALLER_TYPE=fuel" \ + -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds \ + opnfv/functest:<TagIdentifier> /bin/bash + + NOTE: Make sure you have placed the needed credential file into the + Jumphost local path <path_to_your_local_cred_file>. For the + Apex Installer you will need to pre-copy the required OpenStack + credentials file from the Instack/Undercloud Virtual Machine. + See the section 'Apex Installer Tips' later in this document. + + Warning + ------- + If you are using the Joid installer, you must use the method above + to provide the required OpenStack credentials. See the section + 'Focus on the OpenStack credentials' later in this document. + + +The local openstack credential file will be mounted in the Docker container +under the path: '/home/opnfv/functest/conf/openstack.creds' + +If the intention is to run Functest against any of the supported OPNFV +scenarios, it is recommended to include also the environment variable +**DEPLOY_SCENARIO**. The **DEPLOY_SCENARIO** environment variable is passed with the format:: + + -e "DEPLOY_SCENARIO=os-<controller>-<nfv_feature>-<ha_mode>" + + where: + os = OpenStack (No other VIM choices currently available) + controller is one of ( nosdn | odl_l2 | odl_l3 | onos | ocl ) + nfv_feature is one or more of ( ovs | kvm | sfc | bgpvpn | nofeature ) + If several features are pertinent then use the underscore + character '_' to separate each feature (e.g. ovs_kvm) + 'nofeature' indicates no NFV feature is deployed + ha_mode is one of ( ha | noha ) + +For example:: + + docker run -it \ + -e "INSTALLER_IP=10.20.0.2" \ + -e "INSTALLER_TYPE=fuel" \ + -e "DEPLOY_SCENARIO=os-odl_l2-ovs_kvm-ha" \ + opnfv/functest:<TagIdentifier> /bin/bash + +**NOTE:** Not all possible combinations of "DEPLOY_SCENARIO" are supported. +The scenario name passed in to the Functest Docker container must match the +scenario used with the selected installer to create the actual OPNFV platform +deployment. + +Finally, three additional environment variables can also be passed in to the +Functest Docker Container, using the -e "<EnvironmentVariableName>=<Value>" +mechanism. The first two of these are only relevant to Jenkins CI invoked +testing and **should not be used** when performing manual test scenarios:: + + -e "NODE_NAME=<Test POD Name>" \ + -e "BUILD_TAG=<Jenkins Build Tag>" \ + -e "CI_DEBUG=<DebugTraceValue>" + + where: + <Test POD Name> = Symbolic name of the POD where the tests are run. + Visible in test results files, which are stored + to the database. This option is only used when + tests are activated under Jenkins CI control. + It indicates the POD/hardware where the test has + been run. If not specified, then the POD name is + defined as "Unknown" by default. + DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS. + + <Jenkins Build tag> = Symbolic name of the Jenkins Build Job. + Visible in test results files, which are stored + to the database. This option is only set when + tests are activated under Jenkins CI control. + It enables the correlation of test results, which + are independently pushed to the results datbase + from different Jenkins jobs. + DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS. + + <DebugTraceValue> = "true" or "false" + Default = "false", if not specified + If "true" is specified, then additional debug trace + text can be sent to the test results file / log files + and also to the standard console output. + +Apex Installer Tips +------------------- +Some specific tips are useful for the Apex Installer case. If not using Apex +Installer; ignore this section. + + #. The "INSTALLER_IP" environment variable should be set equal to the IP + address of the so-called "Instack/undercloud Virtual Machine". + + In the Jumphost, execute the following command and note the returned + IP address:: + + sudo virsh domifaddr undercloud | grep -Eo "[0-9.]+{4}" + + NOTE: In releases prior to Colorado, the name 'instack' was + used. From Colorado onward, the name 'undercloud' is used. + If in doubt, then execute -from the Jumphost- the command + "virsh list" to see which name is in use for the Installer + Virtual Machine. + + You can now enter the <Specific IP Address> as learned in the above step in the + -e option specification:: + + -e "INSTALLER_IP=<Specific IP Address>" + + #. If you want to 'Bind mount' a local Openstack credentials file ("overcloudrc") + to the Docker container, then you may need to first pre-copy that file from the + 'Instack/Undercloud VM' to the Jump host. + + As before, in the Jumphost, execute the following command and note the + returned IP address:: + + sudo virsh domifaddr undercloud | grep -Eo "[0-9.]+{4}" + + Using the <Specific IP Address> just learned above, execute the following + shell commands **in the Jumphost**, before issuing the 'docker run ...' command + invocation:: + + scp stack@<Specific IP Address>:overcloudrc . + sed -i 's/export no_proxy/#export no_proxy/' overcloudrc + # The above 'sed' command is needed *only* in cases where + # the Jumphost is operating behind a http proxy. + # See the 'Proxy Support' section later on in this document + + NOTE: There are two Openstack credential files present in the + Instack/Undercloud VM: 'overcloudrc' and 'stackrc'. + Don't mix these up! The file 'stackrc' is intended for use with + 'Triple O Undercloud'; only. The SUT always requires OpenStack + Overcloud Credentials. + + The file located at Jumphost path: '~/overcloudrc' is now 'Bind mounted' + to the Docker path '/home/opnfv/functest/conf/openstack.creds' + by specifying a **-v** option:: + + -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds + + in the argument list of the 'docker run ...' command invocation. In the + Apex installer case, the Openstack Credential file has the name + 'overcloudrc' and is located in the home directory of the 'stack' user + ( '/home/stack/' or '~/'] ) in the 'Instack/Undercloud VM'. + + #. In order that the docker container can access the Instack/Undercloud VM, + even with 'stack' user, the SSH keys of the Jumphost root user **must be** + 'Bind mounted' to the docker container by the following **-v** option in + the 'docker run ...' command invocation:: + + -v /root/.ssh/id_rsa:/root/.ssh/id_rsa + + #. Here is an example of the docker command invocation for an Apex installed + system, using latest Funtest docker container, for illustration purposes:: + + docker run -it --name "ApexFuncTstODL" \ + -e "INSTALLER_IP=<Specific IP Address>" \ + -e "INSTALLER_TYPE=apex" \ + -e "DEPLOY_SCENARIO=os-odl_l2-nofeature-ha" \ + -v /root/.ssh/id_rsa:/root/.ssh/id_rsa \ + -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds \ + opnfv/functest /bin/bash + +Functest docker container directory structure +--------------------------------------------- +Inside the Functest docker container, the following directory structure should +now be in place:: `-- home `-- opnfv @@ -59,93 +258,130 @@ Inside the container, the following directory structure should be in place:: |-- functest |-- odl_integration |-- onos + |-- ovno |-- promise |-- rally |-- releng `-- vims-test + (The sub-directory 'ovno' holds SDN controller functional tests + for the OpenContrail SDN Controller, which should be available + for Colorado release) -Basically the container includes: +Underneath the '/home/opnfv/' directory, the Functest docker container +includes two main directories: - * Functest directory to store the configuration (the OpenStack creds are stored - in /home/opngb/functest/conf/openstack.creds), the data (cirros image needed for - some tests), results (some temporary result logs may be stored here) - * Repositories: the functest repository will be used to prepare the - environment and run the tests. Other repositories are used for the installation - of the needed tooling (e.g. rally) and/or the retrieval of feature projects - scenarios (e.g. promise) + * The **functest** directory stores configuration files (e.g. the OpenStack + creds are stored in path '/home/opnfv/functest/conf/openstack.creds'), the + **data** directory stores a 'cirros' test image used in some functional + tests and the **results** directory stores some temporary result log files + * The **repos** directory holds various repositories. The directory + '/home/opnfv/repos/functest' is used to prepare the needed Functest + environment and to run the tests. The other repository directories are + used for the installation of the needed tooling (e.g. rally) or for the + retrieval of feature projects scenarios (e.g. promise) -The structure under the Functest repository can be described as follows:: +The structure under the **functest** repository can be described as follows:: - . - |-- INFO + . |-- INFO |-- LICENSE + |-- __init__.py + |-- ci + | |-- __init__.py + | |-- check_os.sh + | |-- config_functest.yaml + | |-- exec_test.sh + | |-- prepare_env.py + | |-- run_tests.py + | |-- testcases.yaml + | |-- tier_builder.py + | `-- tier_handler.py + |-- cli + | |-- __init__.py + | |-- cli_base.py + | |-- commands + | |-- functest-complete.sh + | `-- setup.py |-- commons | |-- ims | |-- mobile - | `-- traffic-profile-guidelines.rst + | `--traffic-profile-guidelines.rst |-- docker | |-- Dockerfile - | |-- common.sh - | |-- prepare_env.sh - | |-- requirements.pip - | `-- run_tests.sh + | |-- config_install_env.sh + | `-- requirements.pip |-- docs + | |-- com | |-- configguide | |-- devguide | |-- images + | |-- release-notes | |-- results - | `-- userguide - `-- testcases - |-- Controllers - |-- features - |-- tests - |-- VIM - |-- vIMS - |-- vPing + | `--userguide + |-- testcases + | |-- Controllers + | |-- OpenStack + | |-- __init__.py + | |-- features + | |-- security_scan + | `-- vIMS + `-- utils |-- __init__.py - |-- config_functest.py - |-- config_functest.yaml - `-- functest_utils.py - -We may distinguish 4 different folders: - - * **commons**: it is a folder dedicated to store traffic profile or any test - inputs that could be reused by any test project - * **docker**: this folder includes the scripts that will be used to setup the - environment and run the tests - * **docs**: this folder includes the user and installation/configuration guide - * **testcases**: this folder includes the scripts required by Functest internal - test cases and other feature projects test cases. - -After the *run* command, a new prompt appears which means that we are inside the -container and ready to move to the next step. - + |-- clean_openstack.py + |-- functest_logger.py + |-- functest_utils.py + |-- generate_defaults.py + `-- openstack_utils.py + + (Note: All *.pyc files removed from above list for brevity...) + +We may distinguish 7 different directories: + + * **ci**: This directory contains test structure defintion files + (e.g <filename>.yaml) and bash shell/python scripts used to configure and + execute Functional tests. The test execution script can be executed under + the control of Jenkins CI jobs. + * **cli**: This directory holds the python based Functest CLI utility source + code, which is based on the Python 'click' framework. + * **commons**: This directory is dedicated for storage of traffic profile or + any other test inputs that could be reused by any test project. + * **docker**: This directory includes the needed files and tools to build the + Funtest Docker container image. + * **docs**: This directory includes documentation: Release Notes, User Guide, + Configuration Guide and Developer Guide. Test results are also located in + a sub--directory called 'results'. + * **testcases**: This directory includes the scripts required by Functest + internal test cases and other feature projects test cases. + * **utils**: this directory holds Python source code for some general purpose + helper utilities, which testers can also re-use in their own test code. + See for an example the Openstack helper utility: 'openstack_utils.py'. + +After the *run* command, a new prompt appears which means that we are inside +the container and ready to move to the next step. Useful Docker commands ---------------------- +When typing **exit** in the container prompt, this will cause exiting the +container and probably stopping it. When stopping a running Docker container +all the changes will be lost, there is a keyboard shortcut to quit the +container without stopping it: CTRL+P+Q. To reconnect to the running container +**DO NOT** use the *run* command again (since it will create a new container), +use the *exec* command instead:: -When typing **exit** in the container prompt, this will cause -exiting the container and probably stopping it. When stopping a running Docker container -all the changes will be lost, there is a keyboard shortcut to -quit the container without stopping it: CTRL+P+Q. -To reconnect to the running container **DO NOT** use the *run* command again -(since it will create a new container), use *exec* instead:: - - docker ps - <copy the container ID> - docker exec -ti <CONTAINER_ID> /bin/bash + docker ps <copy the container ID> docker exec -ti \ + <CONTAINER_ID> /bin/bash or simply:: - docker exec -ti $(docker ps|grep functest|awk '{print $1}') /bin/bash + docker exec -ti \ + $(docker ps|grep functest|awk '{print $1}') /bin/bash There are other useful Docker commands that might be needed to manage possible issues with the containers. List the running containers:: - docker ps + docker ps List all the containers including the stopped ones:: @@ -155,161 +391,369 @@ It is useful sometimes to remove a container if there are some problems:: docker rm <CONTAINER_ID> -Use the *-f* option if the container is still running, it will force to destroy it:: +Use the *-f* option if the container is still running, it will force to +destroy it:: docker -f rm <CONTAINER_ID> The Docker image is called **opnfv/functest** and it is stored in the public -Docker registry under the OPNFV account: dockerhub_. -The are many different tags that have been created automatically by the CI -mechanisms, but the one that this document refers to is **brahmaputra.1.0**. -Pulling other tags might cause some problems while running the tests. +Docker registry under the OPNFV account: dockerhub_. The are many different +tags that have been created automatically by the CI mechanisms, but the one +that this document refers to is **brahmaputra.1.0**. Pulling other tags might +cause some problems while running the tests. Check the Docker documentation dockerdocs_ for more information. - Preparing the Functest environment ---------------------------------- - -Once the docker container is up and running, execute the following command in the -prompt:: - - ${repos_dir}/functest/docker/prepare_env.sh - -NOTE: **${repos_dir}** is a default environment variable inside the docker -container, which points to */home/opnfv/repos/* - -This script will make sure that the requirements to run the tests are met and will -install the needed libraries and tools by all Functest test cases. It must be run -only once every time the docker is started from sratch. - +Once the Functest docker container is up and running, the required Functest +environment needs to be prepared. A custom built **functest** CLI utility is +availabe to perform the needed environment preparation action. Once the +enviroment is prepared, the **functest** CLI utility can be used to run +different functional tests. The usage of the **functest** CLI utility to run +tests is described further in the Functest User Guide `OPNFV_FuncTestUserGuide`_ + +Prior to commencing the Functest environment preparation, we can check the +initial status of the environment. Issue the **functest env status** command at +the prompt:: + + functest env status + Functest environment is not installed. + + Note: When the Funtest environment is prepared, the command will + return the status: "Functest environment ready to run tests." + +To prepare the Functest docker container for test case execution, issue the +**functest env prepare** command at the prompt:: + + functest env prepare + +This script will make sure that the requirements to run the tests are met and +will install the needed libraries and tools by all Functest test cases. It +should be run only once every time the Functest docker container is started +from scratch. If you try to run this command, on an already prepared +enviroment, you will be prompted whether you really want to continue or not:: + + functest env prepare + It seems that the environment has been already prepared. + Do you want to do it again? [y|n] + + (Type 'n' to abort the request, or 'y' to repeat the + environment preparation) + + +To list some basic information about an already prepared Functest docker +container environment, issue the **functest env show** at the prompt:: + + functest env show + +======================================================+ + | Functest Environment info | + +======================================================+ + | INSTALLER: apex, 192.168.122.89 | + | SCENARIO: os-odl_l2-nofeature-ha | + | POD: localhost | + | GIT BRANCH: master | + | GIT HASH: 5bf1647dec6860464eeb082b2875798f0759aa91 | + | DEBUG FLAG: false | + +------------------------------------------------------+ + | STATUS: ready | + +------------------------------------------------------+ + + Where: + + INSTALLER: Displays the INSTALLER_TYPE value + - here = "apex" + and the INSTALLER_IP value + - here = "192.168.122.89" + SCENARIO: Displays the DEPLOY_SCENARIO value + - here = "os-odl_l2-nofeature-ha" + POD: Displays the value pass in NODE_NAME + - here = "loclahost" + GIT BRANCH: Displays the git branch of the OPNFV Functest + project repository included in the Functest + Docker Container. + - here = "master" + (In first official colorado release + would be "colorado.1.0") + GIT HASH: Displays the git hash of the OPNFV Functest + project repository included in the Functest + Docker Container. + - here = "5bf1647dec6860464eeb082b2875798f0759aa91" + DEBUG FLAG: Displays the CI_DEBUG value + - here = "false" + + NOTE: In Jenkins CI runs, an additional item "BUILD TAG" + would also be listed. The valaue is set by Jenkins CI. + +Finally, the **functest** CLI has a basic 'help' system with so called +**--help** options: + +Some examples:: + + functest --help Usage: functest [OPTIONS] COMMAND [ARGS]... + + Options: + --version Show the version and exit. + -h, --help Show this message and exit. + + Commands: + env + openstack + testcase + tier + + functest env --help + Usage: functest env [OPTIONS] COMMAND [ARGS]... + + Options: + -h, --help Show this message and exit. + + Commands: + prepare Prepares the Functest environment. + show Shows information about the current... + status Checks if the Functest environment is ready... Focus on the OpenStack credentials ---------------------------------- - The OpenStack credentials are needed to run the tests against the VIM. There are 3 ways to provide them to Functest: * using the -v option when running the Docker container - * create an empty file in /home/opnfv/functest/conf/openstack.creds and paste - the credentials in it. + * create an empty file in '/home/opnfv/functest/conf/openstack.creds' and + paste the credentials into it. (Consult your installer guide to know from + where you can retrieve credential files, which are set-up in the Openstack + installation of the SUT) * automatically retrieved using the following script:: - $repos_dir/releng/utils/fetch_os_creds.sh -Once the credentials are there, they shall be sourced before running the tests:: - - source /home/opnfv/functest/conf/openstack.creds + $repos_dir/releng/utils/fetch_os_creds.sh \ + -d /home/opnfv/functest/conf/openstack.creds \ + -i fuel \ + -a 10.20.0.2" + + (-d specifies the full destination path where to place the + copied Openstack credential file + -i specifies the INSTALLER_TYPE + -a specifies the INSTALLER_IP + If the installer is of type "fuel" and a Virtualized + deployment is used, then this should be indicated by + adding an option '-v'. The -v option takes no arguments. + It enables some needed special handling in the script.) + + Note: If you omit the -d <full destination path> option in + the command invocation, then the script will create the + credential file with name 'opnfv-openrc.sh' in directory + '/home/opnfv'. In that case, you need to copy/edit the file + into the correct target path: + '/home/opnfv/functest/conf/openstack.creds'. + +**Warning** If you are using the Joid installer, the 'fetch_os_cred-sh' shell +script **should not be used**. Use instead, the **-v** optin to Bind Mount a +suitably prepared local copy of the Openstack credentials for usage by the Functest +docker container + +Once the credentials are there, they should be sourced **before** running the +tests:: + + source /home/opnfv/functest/conf/openstack.creds or simply using the environment variable **creds**:: - . $creds + . $creds -After this, try to run any OpenStack command to see if you get any output, -for instance:: +After this, try to run any OpenStack command to see if you get any output, for +instance:: - openstack user list + openstack user list This will return a list of the actual users in the OpenStack deployment. In any other case, check that the credentials are sourced:: - env|grep OS_ + env|grep OS_ -This command must show a set of environment variables starting with *OS_*, for example:: +This command must show a set of environment variables starting with *OS_*, for +example:: - OS_REGION_NAME=RegionOne - OS_DEFAULT_DOMAIN=default - OS_PROJECT_NAME=admin - OS_PASSWORD=admin - OS_AUTH_STRATEGY=keystone - OS_AUTH_URL=http://172.30.10.3:5000/v2.0 - OS_USERNAME=admin - OS_TENANT_NAME=admin - OS_ENDPOINT_TYPE=internalURL - OS_NO_CACHE=true + OS_REGION_NAME=RegionOne + OS_DEFAULT_DOMAIN=default + OS_PROJECT_NAME=admin + OS_PASSWORD=admin + OS_AUTH_STRATEGY=keystone + OS_AUTH_URL=http://172.30.10.3:5000/v2.0 + OS_USERNAME=admin + OS_TENANT_NAME=admin + OS_ENDPOINT_TYPE=internalURL + OS_NO_CACHE=true -If still the OpenStack command does not show anything or complains about -connectivity issues, it could be due to an incorrect url given to the OS_AUTH_URL -environment variable. Check the deployment settings. +If the OpenStack command still does not show anything or complains about +connectivity issues, it could be due to an incorrect url given to the +OS_AUTH_URL environment variable. Check the deployment settings. SSL Support ----------- +If you need to connect to a server that is TLS-enabled (the auth URL begins +with ‘https’) and it uses a certificate from a private CA or a self-signed +certificate, then you will need to specify the path to an appropriate CA +certificate to use, to validate the server certificate with the environment +variable OS_CACERT:: -If you need to connect to a server that is TLS-enabled (the auth URL begins with ‘https’) -and it uses a certificate from a private CA or a self-signed certificate you will -need to specify the path to an appropriate CA certificate to use to validate the -server certificate with the environment variable OS_CACERT:: - - echo $OS_CACERT - /etc/ssl/certs/ca.crt - -However, this certificate does not exist in the container by default. It has to -be copied manually from the OpenStack deployment. This can be done in 2 ways: + echo $OS_CACERT + /etc/ssl/certs/ca.crt - #. Create manually that file and copy the contents from the OpenStack controller. +However, this certificate does not exist in the container by default. It has +to be copied manually from the OpenStack deployment. This can be done in 2 ways: - #. (recommended) Add the file using a Docker volume when starting the container:: - - -v <path_to_your_cert_file>:/etc/ssl/certs/ca.cert + #. Create manually that file and copy the contents from the OpenStack + controller. + #. (Recommended) Add the file using a Docker volume when starting the + container:: + -v <path_to_your_cert_file>:/etc/ssl/certs/ca.cert You might need to export OS_CACERT environment variable inside the container:: - export OS_CACERT=/etc/ssl/certs/ca.crt - - -Certificate verification can be turned off using OS_INSECURE=true. -For example, Fuel uses self-signed cacerts by default, so an pre step would be:: - - export OS_INSECURE=true - - -Additional Options ------------------- + export OS_CACERT=/etc/ssl/certs/ca.crt -In case you need to provide different configuration parameters to Functest (e.g. -commit IDs or branches for the repositories, ...) copy the **config_functest.yaml** -from the repository to your current directory and run the container with a volume:: - - wget https://git.opnfv.org/cgit/functest/plain/testcases/config_functest.yaml - - <modify the file accordingly> - - docker run -ti -e \ - "INSTALLER_TYPE=fuel" -e "INSTALLER_IP=10.20.0.2" \ - opnfv/functest:brahmaputra.1.0 \ - -v $(pwd)/config_functest.yaml:/home/opnfv/repos/functest/ci/config_functest.yaml \ - /bin/bash\ - -However, this is not recommended since most of the test cases rely on static -parameters read from this file, and changing them might cause problems. +Certificate verification can be turned off using OS_INSECURE=true. For example, +Fuel uses self-signed cacerts by default, so an pre step would be:: + export OS_INSECURE=true Proxy support ------------- +If your Jumphost node is operating behind a http proxy, then there are 2 places +where some special actions may be needed to make operations succeed: + + #. Initial installation of docker engine First, try following the official + Docker documentation for Proxy_ settings. Some issues were experienced on + CentOS 7 based Jumphost. Some tips are documented in section: + `Docker Installation on CentOS 7 behind http proxy`_ below. + + #. Execution of the Functest environment preparation inside the created + docker container Functest needs internet access to download some resources + for some test cases. For example to install the Rally environment. This might + not work properly if the Jumphost is running through a http Proxy. + +If that is the case, make sure the resolv.conf and the needed http_proxy and +https_proxy environment variables, as well as the 'no_proxy' environment +variable are set correctly:: + + # Make double sure that the 'no_proxy=...' line in the + # 'openstack.creds' file is commented out first. Otherwise, the + # values set into the 'no_proxy' environment variable below will + # be ovewrwritten, each time the command + # 'source ~/functest/conf/openstack.creds' is issued. + + sed -i 's/export no_proxy/#export no_proxy/' \ + ~/functest/conf/openstack.creds + + source ~/functest/conf/openstack.creds + + # Next calculate some IP addresses for which http_proxy + # usage should be excluded: + + publicURL_IP=$(echo $OS_AUTH_URL| \ + grep -Eo "([0-9]+\.){3}[0-9]+") + + adminURL_IP=$(openstack catalog show identity | \ + grep adminURL | grep -Eo "([0-9]+\.){3}[0-9]+") + + export http_proxy="<your http proxy settings>" + export https_proxy="<your httpsproxy settings>" + export no_proxy="127.0.0.1,localhost,$publicURL_IP,$adminURL_IP" + + # Ensure that "git" uses the http_proxy + # This may be needed if your firewall forbids SSL based git fetch + git config --global http.sslVerify True + git config --global http.proxy <Your http proxy settings> + +Validation check: Before running **'functest env prepare'** CLI command, +make sure you can reach http and https sites from inside the Functest docker +container. + +For example, try to use the **nc** command from inside the functest docker +container:: + + nc -v google.com 80 + Connection to google.com 80 port [tcp/http] succeeded! + + nc -v google.com 443 + Connection to google.com 443 port [tcp/https] succeeded! + +Note: In a Jumphost node based on the CentOS 7, enviroment, it was observed that +the **nc** commands did not function as described in the section above. You can +however try using the **curl** command instead, if you encounter any issues +with the **nc** command:: + + curl http://www.google.com:80 + + <HTML><HEAD><meta http-equiv="content-type" + content="text/html;charset=utf-8"> + <TITLE>302 Moved</TITLE> + </HEAD> + <BODY> + <H1>302 Moved</H1> + : + : + </BODY></HTML> + + curl https://www.google.com:443 + + <HTML><HEAD><meta http-equiv="content-type" + content="text/html;charset=utf-8"> + <TITLE>302 Moved</TITLE> + </HEAD> + <BODY> + <H1>302 Moved</H1> + : + : + </BODY></HTML> + + (Even Google complained the URL used, it proves the http and https + protocols are working correctly through the http / https proxy.) + +Docker Installation on CentOS 7 behind http proxy +------------------------------------------------- +There are good instructions in [`InstallDockerCentOS7`_] for the installation +of **docker** on CentOS 7. However, if your Jumphost is behind a http proxy, +then the following steps are needed **before** following the instructions in +the above reference:: + + 1) # Make a directory '/etc/systemd/system/docker.service.d' + # if it does not exist + sudo mkdir /etc/systemd/system/docker.service.d + + # Create a file called 'env.conf' in that directory with + # the following contents: + [Service] + EnvironmentFile=-/etc/sysconfig/docker + + 2) # Set up a file called 'docker' in directory '/etc/sysconfig' + # with the following contents: + + HTTP_PROXY="<Your http proxy settings>" + HTTPS_PROXY="<Your https proxy settings>" + http_proxy="${HTTP_PROXY}" + https_proxy="${HTTPS_PROXY}" + + 3) # Reload the daemon + systemctl daemon-reload + + 4) # Sanity check - check the following docker settings: + systemctl show docker | grep -i env -Functest needs internet access to download some resources for some test cases. -For example to install the Rally environment. This might not work properly if -the Jumphost is running through a Proxy. - -If that is the case, make sure the resolv.conf and the needed proxy environment -variables are properly set:: - - export http_proxy=<your http proxy settings> - export https_proxy=<your https proxy settings> - -Or refer to the official Docker documentation for Proxy_ settings. - -Before running **prepare_env.sh** make sure you can ping http and https sites -inside the container. For example:: - - nc -v google.com 80 - Connection to google.com 80 port [tcp/http] succeeded! - - nc -v google.com 443 - Connection to google.com 443 port [tcp/https] succeeded! - + Expected result: + ---------------- + EnvironmentFile=/etc/sysconfig/docker (ignore_errors=yes) + DropInPaths=/etc/systemd/system/docker.service.d/env.conf +Now follow the instructions in [`InstallDockerCentOS7`_] to download and +install the **docker-engine**. The instructions conclude with a "test pull" +of a sample "Hello World" docker container. This should now work with the +above pre-requisite actions. .. _dockerdocs: https://docs.docker.com/ .. _dockerhub: https://hub.docker.com/r/opnfv/functest/ .. _Proxy: https://docs.docker.com/engine/admin/systemd/#http-proxy +.. _FunctestDockerTags: https://hub.docker.com/r/opnfv/functest/tags/ +.. _InstallDockerCentOS7: https://docs.docker.com/engine/installation/linux/centos/ +.. _OPNFV_FuncTestUserGuide: http://artifacts.opnfv.org/functest/docs/userguide/index.html diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst index 411f68d68..7c8113e16 100644 --- a/docs/configguide/index.rst +++ b/docs/configguide/index.rst @@ -11,13 +11,14 @@ OPNFV FUNCTEST Configuration Guide Introduction ============ - This document describes how to install and configure Functest in OPNFV. +The Functest CLI is utilized during the Functest environment preparation step. High level architecture ----------------------- -The high level architecture of Functest within OPNFV can be described as follows:: +The high level architecture of Functest within OPNFV can be described as +follows:: CIMC/Lights+out management Admin Private Public Storage PXE @@ -70,61 +71,66 @@ The high level architecture of Functest within OPNFV can be described as follows | | | | | 5 +---------------+ | | | | +-+ | | nodes for | | | | | | | | | deploying +-------------------------+ | | - | +-+ | opnfv | | | | | - | | | SUT +-----------------------------------+ | - | +-+ | | | | | + | +-+ | OPNFV | | | | | + | | | +-----------------------------------+ | + | +-+ SUT | | | | | | | +--------------------------------------------+ | +----------------+ | | | | | | | | | - | + + + + + + + + + + + SUT = System Under Test -All the libraries and dependencies needed by all the Functest tools are -pre-installed in the Docker image. -This allows running Functest on any platform on any Operating System. +All the libraries and dependencies needed by all of the Functest tools are +pre-installed into the Docker image. This allows running Functest on any +platform on any Operating System. The automated mechanisms inside the Functest Docker container will: * retrieve OpenStack credentials * prepare the environment according to the SUT - * perform the appropriate tests - * push the results into the OPNFV test result database - + * perform the appropriate functional tests + * push the test results into the OPNFV test result database This Docker image can be integrated into CI or deployed independently. -Please note that the Functest container has been designed for OPNFV, however, it -would be possible to adapt it to any VIM+controller environment since most of the -test cases are integrated from upstream communities. +Please note that the Functest Docker container has been designed for OPNFV, +however, it would be possible to adapt it to any VIM+controller environment, +since most of the test cases are integrated from upstream communities. The test cases are described in the Functest User Guide `[2]`_ Prerequisites ============= - -The OPNFV deployment is out of the scope of this document but it can be found in -`[4]`_. The OPNFV platform is considered as the System Under Test (SUT) in this -document. +The OPNFV deployment is out of the scope of this document but it can be found +in `[4]`_. The OPNFV platform is considered as the System Under Test (SUT) in +this document. Several prerequisites are needed for Functest: #. A Jumphost to run Functest on - #. Docker daemon shall be installed on the Jumphost + #. A Docker daemon shall be installed on the Jumphost #. A public/external network created on the SUT + #. An admin/management network created on the SUT #. Connectivity from the Jumphost to the SUT public/external network - #. Connectivity from the Jumphost to the SUT management network + #. Connectivity from the Jumphost to the SUT admin/management network -NOTE: “Jumphost” refers to any server which meets the previous requirements. +NOTE: **Jumphost** refers to any server which meets the previous requirements. Normally it is the same server from where the OPNFV deployment has been triggered previously. Docker installation ------------------- - .. _Ubuntu: https://docs.docker.com/installation/ubuntulinux/ .. _RHEL: https://docs.docker.com/installation/rhel/ +.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/ -Log on your Jumphost and install docker (e.g. for Ubuntu):: +*Tip:* If your Jumphost is operating behind a company http proxy and/or +Firewall, please consult first the section `Proxy Support`_, towards the end +of this document. The section details some tips/tricks which *may* be of help +in a proxified environment. + +Log on to your Jumphost and install the Docker Engine (e.g. for Ubuntu):: curl -sSL https://get.docker.com/ | sh @@ -136,42 +142,50 @@ A reconnect is needed. There are 2 ways for this: #. Re-login to your account #. su - <username> -References: +If your Jumphost is based on Red Hat Enterprise Linux, or CentOS 7 linux, +please consult the references below. + +References - Installing Docker Engine on different Linux Operating Systems: * Ubuntu_ * RHEL_ - -External network on SUT ------------------------ - -Some of the tests against the VIM (Virtual Infrastructure Manager) need an -existing public network to succeed. This is needed, for example, to create -floating IPs to access instances from the public network (i.e. Docker container). - -By default, the four OPNFV installers provide a fresh installation with -an external network created along with a router. Make sure that subnet -is reachable from the Jumphost - - -Connectivity to OPNFV management network ----------------------------------------- - -Some of the Functest tools need to have access to the OpenStack management + * CentOS_ + +Public/External network on SUT +------------------------------ +Some of the tests against the VIM (Virtual Infrastructure Manager) need +connectivity through an existing public/external network in order to succeed. +This is needed, for example, to create floating IPs to access VM instances +through the public/external network (i.e. from the Docker container). + +By default, the four OPNFV installers provide a fresh installation with a +public/external network created along with a router. Make sure that the +public/external subnet is reachable from the Jumphost. + +*Hint:* For the given OPNFV Installer in use, the IP sub-net address used for +the public/external network is usually a planning item and should thus be known. +Consult the OPNFV Configuration guide `[4]`_, and ensure you can reach each +node in the SUT, from the Jumphost using the 'ping' command using the +respective IP address on the public/external network for each node in the SUT. +(The details of how to determine the needed IP addresses for each node in the +SUT may vary according to the used installer and are therefore ommitted here.) + +Connectivity to OPNFV admin/management network +---------------------------------------------- +Some of the Functest tools need to have access to the OpenStack admin/management network of the controllers `[1]`_. -For this reason, an interface shall be configured in the Jumphost in the -OpenStack management network range. +For this reason, an interface shall be configured in the Jumphost in the OpenStack admin/management network range. -For example, if the management network is on VLAN 300 and subnet 192.168.1.0/24 -and assuming that eth1 is the physical interface with access to that subnet:: +For example, if the admin/management network is using VLAN 300 and subnet 192.168.1.0/24 and assuming that eth1 is the +physical interface with access to that subnet:: ip link add name eth1.300 link eth1 type vlan id 300 ip link set eth1.300 up ip addr add 192.168.1.66/24 dev eth1.300 -This is just an example about how to configure an interface with vlan, but it might -differ depending on the deployment settings on each installer. Check the -corresponding installer instructions for more info. +This is just an example about how to configure an interface with vlan, but it might differ depending on the deployment +settings on each installer. Check the corresponding installer instructions for more precise instructions. Installation and configuration @@ -179,10 +193,8 @@ Installation and configuration .. include:: ./configguide.rst - Integration in CI ================= - In CI we use the Docker image and execute the appropriate commands within the container from Jenkins. @@ -245,7 +257,6 @@ Docker clean in functest-cleanup builder `[3]`_:: fi - References ========== .. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/ @@ -262,7 +273,3 @@ IRC support channel: #opnfv-testperf .. _opnfvmain: http://www.opnfv.org .. _opnfvfunctest: https://wiki.opnfv.org/opnfv_functional_testing -.. _`OpenRC`: http://docs.openstack.org/user-guide/common/cli_set_environment_variables_using_openstack_rc.html -.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html -.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py -.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml |