aboutsummaryrefslogtreecommitdiffstats
path: root/docs/configguide/index.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configguide/index.rst')
-rw-r--r--docs/configguide/index.rst440
1 files changed, 343 insertions, 97 deletions
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
index 47e430d21..85954e770 100644
--- a/docs/configguide/index.rst
+++ b/docs/configguide/index.rst
@@ -1,118 +1,364 @@
-===============================================
+***********************************************
OPNFV FUNCTEST configuration/installation guide
-===============================================
+***********************************************
-.. contents::
+.. toctree::
+ :numbered:
+ :maxdepth: 2
-------------
+============
Introduction
-------------
+============
** DOCUMENT IS IN PROGRESS FOR BRAHMAPUTRA **
-.. _prereqs:
+This document describes how to install and configure Functest in OPNFV.
--------------
+=============
Prerequisites
--------------
+=============
-The installation of the OPNFV solution is out of scope of this document but can be found XXX.
+The installation of the OPNFV solution is out of scope of this document but can be found in XXX.
In the rest of the document the OPNFV solution would be considered as the System Under Test (SUT).
-The installation and configuration of the tools needed to perform the tests will be described in the following sections.
-
-Since Arno SR1, the tools are automatically installed. Manual sourcing of OpenStack credentials is no more required if you are fully integrated in the continuous integration.
-A script has been added to automatically retrieve the credentials.
-However, if you still install manually functest, you will need to source the rc file on the machine you are running the tests.
-More details will be provided in the configuration section.
-
-.. _pharos: https://wiki.opnfv.org/pharos
-
-It is recommended to install the different tools on the jump host server as defined in the pharos_ project.
-
-For functest, the following libraries are needed. You can install them either with yum install or apt-get install, depending on your operating system:
- * python-pip
- * python-dev
- * libffi-dev
- * libxml2-dev
- * libxslt1-dev
-
-You will also need some Python modules:
- * sudo pip install GitPython
- * sudo pip install python-novaclient
- * sudo pip install python-neutronclient
- * sudo pip install python-glanceclient
- * sudo pip install python-keystoneclient
-
-
-The high level architecture can be described as follow::
-
- CIMC/Lights+out management Admin Private Public Storage
- PXE
- +
- + + IP_PRIV/24 | |
- | | + + |
- | | | IP_PUB/24 |
- | +-----------------+ | | + |
- | | | | | | |
- +-----+ Jumpserver | | | | |
- | | +---------------------+ | | |
- | | | | | | |
- | | +----------+ | | | | |
- | | | Rally | +---- --------------------------+ | |
- | | | | | | | | |
- | | | Robot | | | | | |
- | | | | | | | | |
- | | | vPing | | | | | |
- | | | | | | | | |
- | | | Tempest | | | | | |
- | | +----------+ | | | | |
- | | FuncTest +-----------------------------------------+ |
- | | | | | | |
- | | +--------------------------------------------------+
- | | | | | | |
- | +-----------------+ | | | |
- | | | | |
- | +----------------+ | | | |
- | | 1 | | | | |
- +----+ +--------------+-+ | | | |
- | | | 2 | | | | |
- | | | +--------------+-+ | | | |
- | | | | 3 | | | | |
- | | | | +--------------+-+ | | | |
- | | | | | 4 | | | | |
- | +-+ | | +--------------+-+ | | | |
- | | | | | 5 +---------------+ | | |
- | +-+ | | nodes for | | | | |
- | | | | deploying +-------------------------+ | |
- | +-+ | opnfv | | | | |
- | | | SUT +-----------------------------------+ |
- | +-+ | | | | |
- | | +--------------------------------------------+
- | +----------------+ | | | |
- | | | | |
- | + + + +
-
-
-.. _tooling_installation:
-
-------------
-Installation
-------------
-
--------------
-Configuration
--------------
+Several prerequisites are needed for functest:
+ 1) docker must be installed on the Jumphost
+ 2) a connectivity from the jumphost to the SUT management network is needed
+ 3) an external network must be configured
+
+Docker installation
+===================
+
+.. _Ubuntu: https://docs.docker.com/installation/ubuntulinux/
+.. _RHEL: https://docs.docker.com/installation/rhel/
+
+Log on your jumphost then install docker (e.g. for Ubuntu)::
+
+ curl -sSL https://get.docker.com/ | sh
+
+Add your user to docker group to be able to run commands without sudo::
+
+ sudo usermod -aG docker <your_user>
+
+
+References:
+ * Ubuntu_
+ * RHEL_
+
+Connectivy to OPNFV management network
+======================================
+
+Some of the Functest tools need to have access to the OpenStack management network of the controllers `[1]`_.
+
+For this reason and besides the public network, you need to configure an interface on the management network as well in your jumphost (or wherever you want to deploy the Functest docker to run the tests).
+
+Example::
+
+ The OPNFV Fuel installation uses VLAN tagged 300 and subnet 192.168.1.0/24 as Openstack Management network.
+ Supposing that eth1 is the physical interface with access to that subnet:
+ $ ip link add name eth1.300 link eth1 type vlan id 300
+ $ ip link set eth1.300 up
+ $ ip addr add 192.168.1.66/24 dev eth1.300
+
+
+External network on SUT
+=======================
+
+Some of the tests on VIM need an external network. You may perform functest without an external network but some of the tests will fail.
+A default floating ip pool must be configured in nova.conf.
+
+
+
+=======================
+High level architecture
+=======================
+
+The high level architecture of Functest within OPNFV can be described as follow::
+
+ CIMC/Lights+out management Admin Private Public Storage
+ PXE
+ +
+ + + IP_PRIV/24 | |
+ | | + + |
+ | | | IP_PUB/24 |
+ | +--------------------------+ | | + |
+ | | | | | | |
+ +-----+ Jumphost | | | | |
+ | | +--------------------+ | | |
+ | | | | | | |
+ | | +------------------+ | | | | |
+ | | | | | | | | |
+ | | | Tools | +------------------------------+ | |
+ | | | - Rally | | | | | |
+ | | | - Robot | | | | | |
+ | | | - TestON | | | | | |
+ | | | | | | | | |
+ | | | Testcases | | | | | |
+ | | | - VIM | | | | | |
+ | | | -- vPing | | | | | |
+ | | | -- Tempest | | | | | |
+ | | | -- Rally | | | | | |
+ | | | - Controller | | | | | |
+ | | | -- odl | | | | | |
+ | | | -- onos | | | | | |
+ | | | -- opencontrail | | | | | |
+ | | | | | | | | |
+ | | | Features | | | | | |
+ | | | - vIMS | | | | | |
+ | | | | | | | | |
+ | | +------------------+ | | | | |
+ | | +----------------------------------------+ |
+ | | Functest Docker | | | | |
+ | | +-------------------------------------------------+
+ | | | | | | |
+ | +--------------------------+ | | | |
+ | | | | |
+ | +----------------+ | | | |
+ | | 1 | | | | |
+ +----+ +--------------+-+ | | | |
+ | | | 2 | | | | |
+ | | | +--------------+-+ | | | |
+ | | | | 3 | | | | |
+ | | | | +--------------+-+ | | | |
+ | | | | | 4 | | | | |
+ | +-+ | | +--------------+-+ | | | |
+ | | | | | 5 +-----------------------+ | | |
+ | +-+ | | nodes for | | | | |
+ | | | | deploying +---------------------------------+ | |
+ | +-+ | opnfv | | | | |
+ | | | SUT +-------------------------------------------+ |
+ | +-+ | | | | |
+ | | +----------------------------------------------------+
+ | +----------------+ | | | |
+ | | | | |
+ | + + + +
+
+All the components needed by Functest are in the docker file.
+Thanks to docker, there is no more library issues.
+
+This docker file will:
+ * prepare the environment for functional testing
+ * retrieve SUT credentials
+ * perform the tests
+ * push the results into the OPNFV test result database
+
+This docker file can be integrated into CI or deployed independantly of the CI.
+A description of the Brahmaputra testcases can be retrieved in the Functest user guide `[2]`_
+
+Please note that the Functest container has been designed for OPNFV, however, it would be possible to adapt it to any VIM+controller environment as most of the testcases are upstream testcases.
+
+===================
+Manual Installation
+===================
+
+Pull the Functest Docker image from the hub::
+
+ $ docker pull opnfv/functest
+
+Check that the image is available::
+
+ $ docker images
+
+Run the docker container giving the environment variables
+ - INSTALLER_TYPE. Possible values are "apex", "compass", "fuel", "joid" or "foreman" (Arno).
+ - INSTALLER_IP. each installer has its installation strategy. Functest may need to know the IP of the installer to retrieve the credentials (e.g. usually "10.20.0.2" for fuel, not neede for joid, "172.30.10.73" foreman...)
+
+The minimum command to create the Functest docker file can be described as follow::
+
+ docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:latest_stable /bin/bash
+
+Optionnaly, it is possible to precise the container name through the option --name::
+
+ docker run --name "CONTAINER_NAME" -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:latest_stable /bin/bash
+
+It is also possible to to indicate the path of the OpenStack creds using -v::
+
+ docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds opnfv/functest:latest_stable /bin/bash
+
+Your local file will be paste within the container under /home/opnfv/functest/conf/openstack.creds and used by the different test suites.
------------------
+Once run you shall be inside the docker container and ready to run Functest.
+
+Inside the container, you must have the following arborescence::
+
+ `-- home
+ `-- opnfv
+ |-- functest
+ | |-- conf
+ | |-- data
+ | `-- results
+ `-- repos
+ |-- bgpvpn
+ |-- functest
+ |-- odl_integration
+ |-- rally
+ |-- releng
+ `-- vims-test
+
+
+Basically the container includes:
+
+ * Functest directory to store the configuration (the OpenStack creds are paste in /home/opngb/functest/conf), the data (images neede for test for offline testing), results (some temporary artifacts may be stored here)
+ * Repositories: the functest repository will be used to prepare the environement, run the tests. Other repositories are used for the installation of the tooling (e.g. rally) and/or the retrieval of feature projects scenarios (e.g. bgpvpn)
+
+The arborescence under the functest repo can be described as follow::
+
+ .
+ |-- INFO
+ |-- LICENSE
+ |-- commons
+ | |-- ims
+ | |-- mobile
+ | `-- traffic-profile-guidelines.rst
+ |-- docker
+ | |-- Dockerfile
+ | |-- common.sh
+ | |-- prepare_env.sh
+ | |-- requirements.pip
+ | `-- run_tests.sh
+ |-- docs
+ | |-- configguide
+ | |-- functest.rst
+ | |-- images
+ | `-- userguide
+ `-- testcases
+ |-- Controllers
+ |-- VIM
+ |-- __init__.py
+ |-- config_functest.py
+ |-- config_functest.yaml
+ |-- functest_utils.py
+ |-- functest_utils.pyc
+ |-- vIMS
+ `-- vPing
+
+We may distinguish 4 different folders:
+
+ * commons: it is a folder dedicated to store traffic profile or any test inputs that could be reused by any test project
+ * docker: this folder includes the scripts that will be used to setup the environment and run the tests
+ * docs: this folder includes the user and installation/configuration guide
+ * testcases: this folder includes the scripts required by Functest internal test cases
+
+
+Firstly run the script to install functest environment::
+
+ $ ${repos_dir}/functest/docker/prepare_env.sh
+
+NOTE: ${repos_dir} is a default environment variable inside the docker container, which points to /home/opnfv/repos
+
+Run the script to start the tests::
+
+ $ ${repos_dir}/functest/docker/run_tests.sh
+
+NOTE: This will run ALL the tests by default, see `[2]`_ for details
+
+Focus on the OpenStack credentials
+==================================
+
+The OpenStack creds are needed to test the VIM. They can be retrieved in several ways:
+ * using the -v option when creating
+ * sourcing them manually once connected on the docker, once log perform a source <openstack_creds>
+ * automatically retrieved via a script (CI)
+
+If not source you will get an error during the test environnement preparation.
+
+Additional Options
+==================
+
+In case you need to provide different configuration parameters to Functest (e.g. commit IDs or branches for the repositories, …) copy the config_functest.yaml from the repository to your current directory and run docker with a volume::
+
+ $ wget https://git.opnfv.org/cgit/functest/plain/testcases/config_functest.yaml
+ $ cmd1 = "/home/opnfv/repos/functest/docker/prepare_env.sh"
+ $ cmd2 = "/home/opnfv/repos/functest/docker/run_tests.sh"
+ $ docker run -t -e "INSTALLER_TYPE=fuel" -e "INSTALLER_IP=10.20.0.2" opnfv/functest \
+ -v $(pwd)/config_functest.yaml:/home/opnfv/functest/conf/config_functest.yaml \
+ "${cmd1} && ${cmd2}"
+
+=================
Integration in CI
------------------
+=================
+In CI we use the docker file and execute commande within the container from Jenkins.
+
+Docker creation in set-functest-env builder `[3]`_::
+
+ envs="INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}"
+ [...]
+ docker pull opnfv/functest:latest_stable
+ cmd="docker run -id -e $envs ${labconfig} ${sshkey} ${res_volume} opnfv/functest:latest_stable /bin/bash"
+ echo "Functest: Running docker run command: ${cmd}"
+ ${cmd}
+ docker ps -a
+ sleep 5
+ container_id=$(docker ps | grep 'opnfv/functest:latest_stable' | awk '{print $1}' | head -1)
+ echo "Container ID=${container_id}"
+ if [ -z ${container_id} ]; then
+ echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing."
+ docker ps -a
+ exit 1
+ fi
+ echo "Starting the container: docker start ${container_id}"
+ docker start ${container_id}
+ sleep 5
+ docker ps
+ if [ $(docker ps | grep 'opnfv/functest:latest_stable' | wc -l) == 0 ]; then
+ echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..."
+ exit 1
+ fi
+ cmd="${FUNCTEST_REPO_DIR}/docker/prepare_env.sh"
+ echo "Executing command inside the docker: ${cmd}"
+ docker exec ${container_id} ${cmd}
+
+
+Test execution in functest-all builder `[3]`_::
+
+ echo "Functest: run $FUNCTEST_SUITE_NAME"
+ cmd="${FUNCTEST_REPO_DIR}/docker/run_tests.sh --test $FUNCTEST_SUITE_NAME ${flag}"
+ container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1)
+ docker exec $container_id $cmd
+
+Docker clean in functest-cleanup builder `[3]`_::
+
+ echo "Cleaning up docker containers/images..."
+ # Remove previous running containers if exist
+ if [[ ! -z $(docker ps -a | grep opnfv/functest) ]]; then
+ echo "Removing existing opnfv/functest containers..."
+ docker ps | grep opnfv/functest | awk '{print $1}' | xargs docker stop
+ docker ps -a | grep opnfv/functest | awk '{print $1}' | xargs docker rm
+ fi
+ # Remove existing images if exist
+ if [[ ! -z $(docker images | grep opnfv/functest) ]]; then
+ echo "Docker images to remove:"
+ docker images | head -1 && docker images | grep opnfv/functest
+ image_tags=($(docker images | grep opnfv/functest | awk '{print $2}'))
+ for tag in "${image_tags[@]}"; do
+ echo "Removing docker image opnfv/functest:$tag..."
+ docker rmi opnfv/functest:$tag
+ done
+ fi
-----------
+=============
+Configuration
+=============
+
+Everything is preconfigured in the docker file. So except the credentials, there is no specific configuration needed. it is possible to customize the list of tests, see `[2]` for details.
+
+======
+Errors
+======
+
+
+
+
+
+==========
References
-----------
+==========
+.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
+.. _`[2]`: url functest user guide
+.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml
+
OPNFV main site: opnfvmain_.