Merge "Update Functest documentation for Euphrates"

1 files changed, 123 insertions, 343 deletions

diff --git a/docs/testing/user/userguide/runfunctest.rst b/docs/testing/user/userguide/runfunctest.rst
index 83e603b3a..db85c18ff 100644
--- a/docs/testing/user/userguide/runfunctest.rst
+++ b/docs/testing/user/userguide/runfunctest.rst
@@ -1,342 +1,9 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
 .. http://creativecommons.org/licenses/by/4.0
 
-Executing the functest suites (Ubuntu)
-======================================
-
-Manual testing
---------------
-
-This section assumes the following:
- * The Functest Docker container is running
- * The docker prompt is shown
- * The Functest environment is ready (Functest CLI command 'functest env prepare'
-   has been executed)
-
-If any of the above steps are missing please refer to the Functest Config Guide
-as they are a prerequisite and all the commands explained in this section **must** be
-performed **inside the container**.
-
-The Functest CLI offers two commands (functest tier ...) and (functest testcase ... )
-for the execution of Test Tiers or Test Cases::
-
-  root@22e436918db0:~/repos/functest/ci# functest tier --help
-  Usage: functest tier [OPTIONS] COMMAND [ARGS]...
-
-  Options:
-    -h, --help  Show this message and exit.
-
-  Commands:
-    get-tests  Prints the tests in a tier.
-    list       Lists the available tiers.
-    run        Executes all the tests within a tier.
-    show       Shows information about a tier.
-  root@22e436918db0:~/repos/functest/ci# functest testcase --help
-
-  Usage: functest testcase [OPTIONS] COMMAND [ARGS]...
-
-  Options:
-    -h, --help  Show this message and exit.
-
-  Commands:
-    list  Lists the available testcases.
-    run   Executes a test case.
-    show  Shows information about a test case.
-
-More details on the existing Tiers and Test Cases can be seen with the 'list'
-command::
-
-  root@22e436918db0:~/repos/functest/ci# functest tier list
-      - 0. healthcheck:
-             ['connection_check', 'api_check', 'snaps_health_check',]
-      - 1. smoke:
-             ['vping_ssh', 'vping_userdata', 'tempest_smoke_serial', 'odl', 'rally_sanity', 'refstack_defcore', 'snaps_smoke']
-      - 2. features:
-             ['doctor', 'domino', 'promise', security_scan']
-      - 3. components:
-             ['tempest_full_parallel', 'rally_full']
-      - 4. vnf:
-             ['cloudify_ims', 'orchestra_ims', 'vyos_vrouter']
-
-  and
-
-  root@22e436918db0:~/repos/functest/ci# functest testcase list
-  api_check
-  connection_check
-  snaps_health_check
-  vping_ssh
-  vping_userdata
-  snaps_smoke
-  refstack_defcore
-  tempest_smoke_serial
-  rally_sanity
-  odl
-  tempest_full_parallel
-  rally_full
-  vyos_vrouter
 
-Note the list of test cases depend on the installer and the scenario.
-
-More specific details on specific Tiers or Test Cases can be seen wih the
-'show' command::
-
-  root@22e436918db0:~/repos/functest/ci# functest tier show smoke
-  +======================================================================+
-  | Tier:  smoke                                                         |
-  +======================================================================+
-  | Order: 1                                                             |
-  | CI Loop: (daily)|(weekly)                                            |
-  | Description:                                                         |
-  |    Set of basic Functional tests to validate the OpenStack           |
-  |    deployment.                                                       |
-  | Test cases:                                                          |
-  |    - vping_ssh                                                       |
-  |    - vping_userdata                                                  |
-  |    - tempest_smoke_serial                                            |
-  |    - rally_sanity                                                    |
-  |                                                                      |
-  +----------------------------------------------------------------------+
-
-  and
-
-  root@22e436918db0:~/repos/functest/ci# functest testcase  show tempest_smoke_serial
-  +======================================================================+
-  | Testcase:  tempest_smoke_serial                                      |
-  +======================================================================+
-  | Description:                                                         |
-  |    This test case runs the smoke subset of the OpenStack Tempest     |
-  |    suite. The list of test cases is generated by Tempest             |
-  |    automatically and depends on the parameters of the OpenStack      |
-  |    deplopyment.                                                      |
-  | Dependencies:                                                        |
-  |   - Installer:                                                       |
-  |   - Scenario :                                                       |
-  |                                                                      |
-  +----------------------------------------------------------------------+
-
-
-To execute a Test Tier or Test Case, the 'run' command is used::
-
-  root@22e436918db0:~/repos/functest/ci# functest tier run healthcheck
-
-  2017-08-16 12:35:51,799 - functest.ci.run_tests - INFO - ############################################
-  2017-08-16 12:35:51,799 - functest.ci.run_tests - INFO - Running tier 'healthcheck'
-  2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ############################################
-  2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO -
-  2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - Running test case 'connection_check'...
-  2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:36:00,278 - functest.core.testcase - INFO - The results were successfully pushed to DB
-  2017-08-16 12:36:00,279 - functest.ci.run_tests - INFO - Test result:
-  +--------------------------+------------------+------------------+----------------+
-  |        TEST CASE         |     PROJECT      |     DURATION     |     RESULT     |
-  +--------------------------+------------------+------------------+----------------+
-  |     connection_check     |     functest     |      00:06       |      PASS      |
-  +--------------------------+------------------+------------------+----------------+
-  2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO -
-  2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - Running test case 'api_check'...
-  2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:41:04,088 - functest.core.testcase - INFO - The results were successfully pushed to DB
-  2017-08-16 12:41:04,088 - functest.ci.run_tests - INFO - Test result:
-  +-------------------+------------------+------------------+----------------+
-  |     TEST CASE     |     PROJECT      |     DURATION     |     RESULT     |
-  +-------------------+------------------+------------------+----------------+
-  |     api_check     |     functest     |      05:03       |      PASS      |
-  +-------------------+------------------+------------------+----------------+
-  2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO -
-  2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - Running test case 'snaps_health_check'...
-  2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:41:39,817 - functest.core.testcase - INFO - The results were successfully pushed to DB
-  2017-08-16 12:41:39,818 - functest.ci.run_tests - INFO - Test result:
-  +----------------------------+------------------+------------------+----------------+
-  |         TEST CASE          |     PROJECT      |     DURATION     |     RESULT     |
-  +----------------------------+------------------+------------------+----------------+
-  |     snaps_health_check     |     functest     |      00:35       |      PASS      |
-  +----------------------------+------------------+------------------+----------------+
-
-  and
-
-  root@22e436918db0:~/repos/functest/ci# functest testcase run vping_ssh
-  2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - Running test case 'vping_ssh'...
-  2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - ============================================
-  2017-08-16 12:42:49,861 - functest.core.testcase - INFO - The results were successfully pushed to DB
-  2017-08-16 12:42:49,861 - functest.ci.run_tests - INFO - Test result:
-  +-------------------+------------------+------------------+----------------+
-  |     TEST CASE     |     PROJECT      |     DURATION     |     RESULT     |
-  +-------------------+------------------+------------------+----------------+
-  |     vping_ssh     |     functest     |      00:47       |      PASS      |
-  +-------------------+------------------+------------------+----------------+
-  :
-  :
-  etc.
-
-To list the test cases which are part of a specific Test Tier, the 'get-tests'
-command is used with 'functest tier'::
-
-  root@22e436918db0:~/repos/functest/ci# functest tier get-tests healthcheck
-  Test cases in tier 'healthcheck':
-   ['connection_check', 'api_check', 'snaps_health_check']
-
-
-Please note that for some scenarios some test cases might not be launched.
-For example, the last example displayed only the 'odl' testcase for the given
-environment. In this particular system the deployment does not support the 'ocl' SDN
-Controller Test Case; for example.
-
-**Important** If you use the command 'functest tier run <tier_name>', then the
-Functest CLI utility will call **all valid Test Cases**, which belong to the
-specified Test Tier, as relevant to scenarios deployed to the SUT environment.
-Thus, the Functest CLI utility calculates automatically which tests can be
-executed and which cannot, given the environment variable **DEPLOY_SCENARIO**,
-which is passed in to the Functest docker container.
-
-Currently, the Functest CLI command 'functest testcase run <testcase_name>', supports
-two possibilities::
-
- *  Run a single Test Case, specified by a valid choice of <testcase_name>
- *  Run ALL test Test Cases (for all Tiers) by specifying <testcase_name> = 'all'
-
-Functest includes a cleaning mechanism in order to remove all the OpenStack
-resources except those present before running any test. The script
-*$REPOS_DIR/functest/functest/utils/openstack_snapshot.py* is called once when setting up
-the Functest environment (i.e. CLI command 'functest env prepare') to snapshot
-all the OpenStack resources (images, networks, volumes, security groups, tenants,
-users) so that an eventual cleanup does not remove any of these defaults.
-
-The script **openstack_clean.py** which is located in
-*$REPOS_DIR/functest/functest/utils/* is in charge of cleaning the OpenStack resources
-that are not specified in the defaults file generated previously which is stored in
-*/home/opnfv/functest/conf/openstack_snapshot.yaml* in the Functest docker container.
-
-It is important to mention that if there are new OpenStack resources created
-manually after the snapshot done before running the tests, they will be removed,
-unless you use the special method of invoking the test case with specific
-suppression of clean up. (See the `Troubleshooting`_ section).
-
-The reason to include this cleanup meachanism in Functest is because some
-test suites create a lot of resources (users, tenants, networks, volumes etc.)
-that are not always properly cleaned, so this function has been set to keep the
-system as clean as it was before a full Functest execution.
-
-Although the Functest CLI provides an easy way to run any test, it is possible to
-do a direct call to the desired test script. For example:
-
-    python $REPOS_DIR/functest/functest/opnfv_tests/openstack/vping/vping_ssh.py
-
-
-Automated testing
------------------
-
-As mentioned previously, the Functest Docker container preparation as well as
-invocation of Test Cases can be called within the container from the Jenkins CI
-system. There are 3 jobs that automate the whole process. The first job runs all
-the tests referenced in the daily loop (i.e. that must been run daily), the second
-job runs the tests referenced in the weekly loop (usually long duration tests run
-once a week maximum) and the third job allows testing test suite by test suite specifying
-the test suite name. The user may also use either of these Jenkins jobs to execute
-the desired test suites.
-
-One of the most challenging task in the Danube release consists
-in dealing with lots of scenarios and installers. Thus, when the tests are
-automatically started from CI, a basic algorithm has been created in order to
-detect whether a given test is runnable or not on the given scenario.
-Some Functest test suites cannot be systematically run (e.g. ODL suite can not
-be run on an ONOS scenario). The daily/weekly notion has been introduces in
-Colorado in order to save CI time and avoid running systematically
-long duration tests. It was not used in Colorado due to CI resource shortage.
-The mechanism remains however as part of the CI evolution.
-
-CI provides some useful information passed to the container as environment
-variables:
-
- * Installer (apex|compass|fuel|joid), stored in INSTALLER_TYPE
- * Installer IP of the engine or VM running the actual deployment, stored in INSTALLER_IP
- * The scenario [controller]-[feature]-[mode], stored in DEPLOY_SCENARIO with
-
-   * controller = (odl|ocl|nosdn)
-   * feature = (ovs(dpdk)|kvm|sfc|bgpvpn|ovs_dpdk_bar)
-   * mode = (ha|noha)
-
-The constraints per test case are defined in the Functest configuration file
-*/usr/local/lib/python2.7/dist-packages/functest/ci/testcases.yaml*::
-
- tiers:
-   -
-        name: smoke
-        order: 1
-        ci_loop: '(daily)|(weekly)'
-        description : >-
-            Set of basic Functional tests to validate the OpenStack deployment.
-        testcases:
-            -
-                name: vping_ssh
-                criteria: 'status == "PASS"'
-                blocking: true
-                description: >-
-                    This test case verifies: 1) SSH to an instance using floating
-                    IPs over the public network. 2) Connectivity between 2 instances
-                    over a private network.
-                dependencies:
-                    installer: ''
-                    scenario: '^((?!bgpvpn|odl_l3).)*$'
-                run:
-                    module: 'functest.opnfv_tests.openstack.vping.vping_ssh'
-                    class: 'VPingSSH'
-        ....
-
-We may distinguish 2 levels in the test case description:
-  * Tier level
-  * Test case level
-
-At the tier level, we define the following parameters:
-
- * ci_loop: indicate if in automated mode, the test case must be run in dail and/or weekly jobs
- * description: a high level view of the test case
-
-For a given test case we defined:
-  * the name of the test case
-  * the criteria (experimental): a criteria used to declare the test case as PASS or FAIL
-  * blocking: if set to true, if the test is failed, the execution of the following tests is canceled
-  * the description of the test case
-  * the dependencies: a combination of 2 regex on the scenario and the installer name
-  * run: In Danube we introduced the notion of abstract class in order to harmonize the way to run internal, feature or vnf tests
-
-For further details on abstraction classes, see developper guide.
-
-Additional parameters have been added in the desription in the Database.
-The target is to use the configuration stored in the Database and consider the
-local file as backup if the Database is not reachable.
-The additional fields related to a test case are:
-  * trust: we introduced this notion to put in place a mechanism of scenario promotion.
-  * Version: it indicates since which version you can run this test
-  * domains: the main domain covered by the test suite
-  * tags: a list of tags related to the test suite
-
-The order of execution is the one defined in the file if all test cases are selected.
-
-In CI daily job the tests are executed in the following order:
-
-  1) healthcheck (blocking)
-  2) smoke: both vPings are blocking
-  3) Feature project tests cases
-
-In CI weekly job we add 2 tiers:
-
-  4) VNFs (vIMS)
-  5) Components (Rally and Tempest long duration suites)
-
-As explained before, at the end of an automated execution, the OpenStack resources
-might be eventually removed.
-Please note that a system snapshot is taken before any test case execution.
-
-This testcase.yaml file is used for CI, for the CLI and for the automatic reporting.
-
-
-Executing Functest suites (Alpine)
-==================================
+Executing Functest suites
+=========================
 
 As mentioned in the configuration guide `[1]`_, Alpine docker containers have
 been introduced in Euphrates.
@@ -362,9 +29,117 @@ You should get::
 You can run functest-healcheck, functest-smoke, functest-features,
 functest-components and functest-vnf.
 
-Please note that you may also use the CLI for manual tests using Alpine
-containers.
+The result tables show the results by test case, it can be::
+
+  * PASS
+  * FAIL
+  * SKIP: if the scenario/installer does not support the test case
+
+
+Manual run
+==========
+If you want to run the test step by step, you may add docker option then run the
+different commands within the docker.
+
+Considering the healthcheck example, running functest manaully means::
+
+  sudo docker run -ti --env-file env \
+    -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds  \
+    -v $(pwd)/images:/home/opnfv/functest/images  \
+    opnfv/functest-healthcheck /bin/bash
+
+The docker prompt shall be returned. Then within the docker run the following
+commands::
+
+  $ source /home/opnfv/functest/conf/openstack.creds
+
+Prepare environment
+-------------------
+Prior to commencing the Functest environment preparation, we can check
+the initial status of the environment. Issue the **functest env status**
+command at the prompt::
+
+  # functest env status
+  # Functest environment is not installed.
+
+To prepare the Functest docker container for test case execution, type::
+
+  # functest env prepare
+  # ...
+  # Functest environment ready to run tests.
+
+you may also type prepare_env instead of functest env prepare.
+
+To list some basic information about an already prepared Functest
+docker container environment, issue the **functest env show** at the
+prompt::
+  bash-4.3# functest env show
+  +------------------------------+---------------------------------+
+  |     FUNCTEST ENVIRONMENT     |              VALUE              |
+  +------------------------------+---------------------------------+
+  |            STATUS            |              ready              |
+  |           SCENARIO           |     os-nosdn-nofeature-noha     |
+  |          DEBUG FLAG          |              false              |
+  |          BUILD_TAG           |               None              |
+  |          INSTALLER           |              compass            |
+  |             POD              |           huawei-pod1           |
+  +------------------------------+---------------------------------+
+
+See configuration guide for details on Functest environnement variables.
+
+Tier
+----
+Each Alpine container provided on the docker hub matches with a tier.
+The following commands are available::
+
+  # functest tier list
+    - 0. healthcheck:
+    ['connection_check', 'api_check', 'snaps_health_check']
+  # functest tier show healthcheck
+  +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+  |        TIERS        |     ORDER     |         CI LOOP          |                   DESCRIPTION                   |             TESTCASES              |
+  +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+  |     healthcheck     |       0       |     (daily)|(weekly)     |     First tier to be executed to verify the     |     connection_check api_check     |
+  |                     |               |                          |           basic operations in the VIM.          |         snaps_health_check         |
+  +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+
+To run all the cases of the tier, type::
+
+  # functest tier run healthcheck
+
+Testcase
+--------
+Testcases can be listed, shown and run though the CLI::
+
+  # functest testcase list
+   connection_check
+   api_check
+   snaps_health_check
+  # functest testcase show api_check
+  +-------------------+--------------------------------------------------+------------------+---------------------------+
+  |     TEST CASE     |                   DESCRIPTION                    |     CRITERIA     |         DEPENDENCY        |
+  +-------------------+--------------------------------------------------+------------------+---------------------------+
+  |     api_check     |     This test case verifies the retrieval of     |       100        |     ^((?!netvirt).)*$     |
+  |                   |       OpenStack clients: Keystone, Glance,       |                  |                           |
+  |                   |      Neutron and Nova and may perform some       |                  |                           |
+  |                   |     simple queries. When the config value of     |                  |                           |
+  |                   |       snaps.use_keystone is True, functest       |                  |                           |
+  |                   |     must have access to the cloud's private      |                  |                           |
+  |                   |                     network.                     |                  |                           |
+  +-------------------+--------------------------------------------------+------------------+---------------------------+
+  # functest testcase run connection_check
+  ...
+  # functest run all
+
+You can also type run_tests -t all to run all the tests.
+
+Note the list of test cases depend on the installer and the scenario.
+
 
+Reporting results to the test Database
+======================================
+In OPNFV CI we collect all the results from CI. A test APi shall be available
+as well as a test database `[17]`_.
 
 Functest internal API
 =====================
@@ -377,18 +152,23 @@ other test projects.
 
 In Euphrates the main method of the APIs are:
 
-  * Show environment
-  * Prepare Environment
   * Show credentials
+  * Update openrc file
+  * Show environment
+  * Update hosts info for domain name
+  * Prepare environment
   * List all testcases
   * Show a testcase
+  * Run a testcase
   * List all tiers
   * Show a tier
   * List all testcases within given tier
+  * Get the result of the specified task
+  * Get the log of the specified task
 
-The API can be invoked as follows:
-  http://<functest_url>:5000/api/v1/functest/envs
+See `[16]`_ to get examples on how to use the API.
 
-TODO
 
-.. _`[1]`: http://artifacts.opnfv.org/functest/colorado/docs/configguide/#
+.. _`[1]`: http://docs.opnfv.org/en/latest/submodules/functest/docs/testing/user/configguide/index.html
+.. _`[16]`: https://wiki.opnfv.org/display/functest/Running+test+cases+via+new+Functest+REST+API
+.. _`[17]`: http://docs.opnfv.org/en/latest/testing/testing-dev.html