Restructure docs

DOCS directory restructured according to:
https://wiki.opnfv.org/display/DOC/Documentation+Guide

Now:
 - release
    - release notes

 - testing
    - developer
       - dev guide (this is to be released on docs.opnfv.org)
       - internship (docs about intern projects)

    - user (this is to be released on docs.opnfv.org)
       - config guide
       - user guide

Change-Id: I1851189601aac3c5989f19f99d779efe23dbf3d1
Signed-off-by: jose.lausuch <jose.lausuch@ericsson.com>

2 files changed, 0 insertions, 1117 deletions

diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst
deleted file mode 100644
index 08e089c2b..000000000
--- a/docs/configguide/configguide.rst
+++ /dev/null
@@ -1,821 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-Pulling the Docker image
-------------------------
-Pull the Functest Docker image ('opnfv/functest') from the public
-dockerhub registry under the OPNFV account: [dockerhub_], with the
-following docker command::
-
-  docker pull opnfv/functest:<TagIdentifier>
-
-where <TagIdentifier> identifies a release of the Functest docker
-container image in the public dockerhub registry. There are many tags
-created automatically by the CI mechanisms, and you must ensure you
-pull an image with the **correct tag** to match the OPNFV software
-release installed in your environment. All available tagged images can
-be seen from location [FunctestDockerTags_]. For example, when running
-on the first official release of the OPNFV Colorado system platform,
-tag "colorado.1.0" is needed. Pulling other tags might cause some
-problems while running the tests.
-Docker images pulled without a tag specifier bear the implicitly
-assigned label "latest". If you need to specifically pull the latest
-Functest docker image, then omit the tag argument::
-
-  docker pull opnfv/functest
-
-After pulling the Docker image, check that it is available with the
-following docker command::
-
-  [functester@jumphost ~]$ docker images
-  REPOSITORY     TAG             IMAGE ID      CREATED      SIZE
-  opnfv/functest latest          8cd6683c32ae  2 weeks ago  1.321 GB
-  opnfv/functest danube.1.0    13fa54a1b238  4 weeks ago  1.29 GB
-  opnfv/functest colorado.1.0    94b78faa94f7  9 weeks ago  968 MB
-
-The Functest docker container environment can -in principle- be also
-used with non-OPNFV official installers (e.g. 'devstack'), with the
-**disclaimer** that support for such environments is outside of the
-scope and responsibility of the OPNFV project.
-
-Accessing the Openstack credentials
------------------------------------
-OpenStack credentials are mandatory and can be retrieved in different
-ways. From inside the running Functest docker container the
-"functest env prepare" command will automatically look for the
-Openstack credentials file "/home/opnfv/functest/conf/openstack.creds"
-and retrieve it unless the file already exists. This Functest
-environment preparation step is described later in this document.
-
-WARNING: When the installer type is "joid" you have to have the
-credentials file inside the running container **before** initiating the
-functest environment preparation. For that reason you have to choose
-either one of the options below, since the automated copying does not
-work for "joid".
-
-You can also specifically pass in the needed file prior to running the
-environment preparation either:
-
-  * by using the -v option when creating the Docker container. This is
-    referred to in docker documentation as "Bind Mounting". See the
-    usage of this parameter in the following chapter.
-  * or creating a local file '/home/opnfv/functest/conf/openstack.creds'
-    inside the running container with the credentials in it. Consult
-    your installer guide for further details. This is however not
-    instructed in this document.
-
-NOTE: When the installer type is "fuel" and virtualized deployment
-is used, there you have to explicitly fetch the credentials file
-executing the following sequence
-
-  #. Create a container as described in next chapter but do not
-     "Bind Mount" the credentials
-  #. Log in to container and execute the following command. Replace
-     the IP with installer address after the "-a" parameter::
-
-       $REPOS_DIR/releng/utils/fetch_os_creds.sh \
-       -d /home/opnfv/functest/conf/openstack.creds \
-       -i fuel \
-       -a 10.20.0.2 \
-       -v
-       ( -d specifies the full path to the Openstack credential file
-       -i specifies the INSTALLER_TYPE
-       -a specifies the INSTALLER_IP
-       -v indicates a virtualized environment and takes no arguments )
-
-  #. Continue with your testing, initiate functest environment
-     preparation, run tests etc.
-
-In proxified environment you may need to change the credentials file.
-There are some tips in chapter: `Proxy support`_
-
-Functest Docker parameters
---------------------------
-This chapter explains how to run a container for executing functest
-test suites. Numbered list below explains some details of the
-recommended parameters for invoking docker container
-
-  #. It is a good practice to assign a precise container name through
-     the **--name** option.
-
-  #. Assign parameter for installer type::
-
-       -e "INSTALLER_TYPE=<type>"
-       # Use one of following apex, compass, fuel or joid
-
-  #. Functest needs to know the IP of some installers::
-
-       -e "INSTALLER_IP=<Specific IP Address>"
-
-       This IP is needed to fetch RC file from deployment, fetch logs, ...
-       If not provided, there is no way to fetch the RC file. It must be
-       provided manually as a volume
-
-  #. Credentials for accessing the Openstack.
-     Most convenient way of passing them to container is by having a
-     local copy of the credentials file in Jumphost and then using the
-     **-v** option. In the example we have local file by the name of
-     "overcloudrc" and we are using that as an argument::
-
-       -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds
-
-       The credentials file needs to exist in the Docker container
-       under the path: '/home/opnfv/functest/conf/openstack.creds'.
-
-     **WARNING:** If you are using the Joid installer, you must pass the
-     credentials using the **-v** option:
-     -v /var/lib/jenkins/admin-openrc:/home/opnfv/functest/conf/openstack.creds.
-     See the section `Accessing the Openstack credentials`_ above.
-
-  #. Passing deployment scenario
-     When running Functest against any of the supported OPNFV scenarios,
-     it is recommended to include also the environment variable
-     **DEPLOY_SCENARIO**. The **DEPLOY_SCENARIO** environment variable
-     is passed with the format::
-
-       -e "DEPLOY_SCENARIO=os-<controller>-<nfv_feature>-<ha_mode>"
-       where:
-       os = OpenStack (No other VIM choices currently available)
-       controller is one of ( nosdn | odl_l2 | odl_l3 | onos | ocl)
-       nfv_feature is one or more of ( ovs | kvm | sfc | bgpvpn | nofeature )
-                If several features are pertinent then use the underscore
-                character '_' to separate each feature (e.g. ovs_kvm)
-                'nofeature' indicates no NFV feature is deployed
-       ha_mode (high availability) is one of ( ha | noha )
-
-     **NOTE:** Not all possible combinations of "DEPLOY_SCENARIO" are
-     supported. The name passed in to the Functest Docker container
-     must match the scenario used when the actual OPNFV platform was
-     deployed. See release note to see the list of supported scenarios.
-
-     **NOTE:** The scenario name is mainly used to automatically detect
-     if a test suite is runnable or not (e.g. it will prevent ONOS test suite
-     to be run on ODL scenarios). If not set, Functest will try to run the
-     default test cases that might not include SDN controller or a specific
-     feature
-
-     **NOTE:** A HA scenario means that 3 OpenStack controller nodes are
-     deployed. It does not necessarily mean that the whole system is HA. See
-     installer release notes for details.
-
-
-Putting all above together, when using installer 'fuel' and an invented
-INSTALLER_IP of '10.20.0.2', the recommended command to create the
-Functest Docker container is as follows::
-
-  docker run --name "FunctestContainer" -it \
-  -e "INSTALLER_IP=10.20.0.2" \
-  -e "INSTALLER_TYPE=fuel" \
-  -e "DEPLOY_SCENARIO=os-odl_l2-ovs_kvm-ha" \
-  -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds \
-  opnfv/functest /bin/bash
-
-After the *run* command, a new prompt appears which means that we are inside
-the container and ready to move to the next step.
-
-For tips on how to set up container with installer Apex, see chapter
-`Apex Installer Tips`_.
-
-Finally, three additional environment variables can also be passed in
-to the Functest Docker Container, using the -e
-"<EnvironmentVariable>=<Value>" mechanism. The first two of these are
-only relevant to Jenkins CI invoked testing and **should not be used**
-when performing manual test scenarios::
-
-  -e "NODE_NAME=<Test POD Name>" \
-  -e "BUILD_TAG=<Jenkins Build Tag>" \
-  -e "CI_DEBUG=<DebugTraceValue>"
-  where:
-  <Test POD Name> = Symbolic name of the POD where the tests are run.
-                    Visible in test results files, which are stored
-                    to the database. This option is only used when
-                    tests are activated under Jenkins CI control.
-                    It indicates the POD/hardware where the test has
-                    been run. If not specified, then the POD name is
-                    defined as "Unknown" by default.
-                    DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS.
-  <Jenkins Build tag> = Symbolic name of the Jenkins Build Job.
-                        Visible in test results files, which are stored
-                        to the database. This option is only set when
-                        tests are activated under Jenkins CI control.
-                        It enables the correlation of test results,
-                        which
-                        are independently pushed to the results datbase
-                        from different Jenkins jobs.
-                        DO NOT USE THIS OPTION IN MANUAL TEST SCENARIOS.
-  <DebugTraceValue> = "true" or "false"
-                      Default = "false", if not specified
-                      If "true" is specified, then additional debug trace
-                      text can be sent to the test results file / log files
-                      and also to the standard console output.
-
-Apex Installer Tips
--------------------
-Some specific tips are useful for the Apex Installer case. If not using
-Apex Installer; ignore this section.
-
-In case of Triple-O based installer (like Apex) the docker container
-needs to connect to the installer VM, so it is then required that some
-known SSH keys are present in docker container. Since the Jumphost root
-SSH keys are already known, easiest way is to use those using the
-'Bind mount' method. See below for sample parameter::
-
-  -v /root/.ssh/id_rsa:/root/.ssh/id_rsa
-
-  NOTE: You need the "sudo" when creating the container to access root
-  users ssh credentials even the docker command itself might not
-  require that.
-
-HINT! In case of Triple-O installers you can find value for the
-INSTALLER_IP parameter by executing command and note the returned IP
-address::
-
-  inst=$(sudo virsh list | grep -iEo "undercloud|instack")
-  sudo virsh domifaddr ${inst}
-
-  NOTE: In releases prior to Colorado, the name 'instack' was
-  used. Currently the name 'undercloud' is used.
-
-You can copy the credentials file from the "stack" users home directory
-in installer VM to Jumphost. Please check the correct IP from the
-command above. In the example below we are using invented IP address
-"192.168.122.89"::
-
-    scp stack@192.168.122.89:overcloudrc .
-
-Here is an example of the full docker command invocation for an Apex
-installed system, using latest Functest docker container, for
-illustration purposes::
-
-  sudo docker run -it --name "ApexFuncTestODL" \
-  -e "INSTALLER_IP=192.168.122.89" \
-  -e "INSTALLER_TYPE=apex" \
-  -e "DEPLOY_SCENARIO=os-odl_l2-nofeature-ha" \
-  -v /root/.ssh/id_rsa:/root/.ssh/id_rsa \
-  -v ~/overcloudrc:/home/opnfv/functest/conf/openstack.creds \
-  opnfv/functest /bin/bash
-
-Compass installer local development env usage Tips
---------------------------------------------------
-In the compass-functest local test case check and development environment,
-in order to get openstack service inside the functest container, some
-parameters should be configured during container creation, which are
-hard to guess for freshman. This section will provide the guideline, the
-parameters values are defaults here, which should be adjusted according
-to the settings, the complete steps are given here so as not to appear
-too abruptly.
-
-1, Pull Functest docker image from public dockerhub::
-
-    docker pull opnfv/functest:<Tag>
-
-<Tag> here can be "brahmaputra.1.0", "colorado.1.0", etc.
-Tag omitted means the latest docker image::
-
-    docker pull opnfv/functest
-
-2, Functest Docker container creation
-
-To make a file used for the environment, such as 'functest-docker-env'::
-
-    OS_AUTH_URL=http://172.16.1.222:35357/v2.0
-    OS_USERNAME=admin
-    OS_PASSWORD=console
-    OS_TENANT_NAME=admin
-    OS_VOLUME_API_VERSION=2
-    OS_PROJECT_NAME=admin
-    INSTALLER_TYPE=compass
-    INSTALLER_IP=192.168.200.2
-    EXTERNAL_NETWORK=ext-net
-
-Note: please adjust the content according to the environment, such as
-'TENANT_ID' maybe used for some special cases.
-
-Then to create the Functest docker::
-
-    docker run --privileged=true --rm -t \
-    --env-file functest-docker-env \
-    --name <Functest_Container_Name> \
-    opnfv/functest:<Tag> /bin/bash
-
-3, To attach Functest container
-
-Before trying to attach the Functest container, the status can be checked by::
-
-   docker ps -a
-
-to attach the 'Up' status Functest container and start bash mode::
-
-   docker exec -it <Functest_Container_Name> bash
-
-4, Functest environemnt preparation and check
-
-To see the Section below `Preparing the Functest environment`_.
-
-Functest docker container directory structure
----------------------------------------------
-Inside the Functest docker container, the following directory structure
-should now be in place::
-
-  `-- home
-      `-- opnfv
-        |-- functest
-        |   |-- conf
-        |   |-- data
-        |   `-- results
-        `-- repos
-            |-- bgpvpn
-            |-- copper
-            |-- doctor
-            |-- domino
-            |-- functest
-            |-- kingbird
-            |-- odl_test
-            |-- onos
-            |-- ovno
-            |-- parser
-            |-- promise
-            |-- rally
-            |-- releng
-            |-- sdnvpn
-            |-- securityscanning
-            |-- sfc
-            |-- tempest
-            |-- vims_test
-            `-- vnfs
-
-Underneath the '/home/opnfv/' directory, the Functest docker container
-includes two main directories:
-
-  * The **functest** directory stores configuration files (e.g. the
-    OpenStack creds are stored in path '/home/opnfv/functest/conf/openstack.creds'),
-    the **data** directory stores a 'cirros' test image used in some
-    functional tests and the **results** directory stores some temporary
-    result log files
-  * The **repos** directory holds various repositories. The directory
-    '/home/opnfv/repos/functest' is used to prepare the needed Functest
-    environment and to run the tests. The other repository directories
-    are used for the installation of the needed tooling (e.g. rally) or
-    for the retrieval of feature projects scenarios (e.g. promise)
-
-The structure under the **functest** repository can be described as
-follows::
-
-  . |-- INFO
-    |-- LICENSE
-    |-- requirements.txt
-    |-- run_unit_tests.sh
-    |-- setup.py
-    |-- test-requirements.txt
-    |-- commons
-    |   |-- ims
-    |   |-- mobile
-    |   `--traffic-profile-guidelines.rst
-    |-- docker
-    |   |-- Dockerfile
-    |   |-- config_install_env.sh
-    |   `-- docker_remote_api
-    |-- docs
-    |   |-- com
-    |   |-- configguide
-    |   |-- devguide
-    |   |-- images
-    |   |-- internship
-    |   |-- release-notes
-    |   |-- results
-    |   `--userguide
-    |-- functest
-        |-- __init__.py
-        |-- ci
-        |   |-- __init__.py
-        |   |-- check_os.sh
-        |   |-- config_functest.yaml
-        |   |-- config_patch.yaml
-        |   |-- exec_test.sh
-        |   |-- generate_report.py
-        |   |-- prepare_env.py
-        |   |-- run_tests.py
-        |   |-- testcases.yaml
-        |   |-- tier_builder.py
-        |   `-- tier_handler.py
-        |-- cli
-        |   |-- __init__.py
-        |   |-- cli_base.py
-        |   |-- commands
-        |   |-- functest-complete.sh
-        |   `-- setup.py
-        |-- core
-        |   |-- __init__.py
-        |   |-- feature_base.py
-        |   |-- pytest_suite_runner.py
-        |   |-- testcase_base.py
-        |   |-- vnf_base.py
-        |-- opnfv_tests
-        |   |-- __init__.py
-        |   |-- features
-        |   |-- mano
-        |   |-- openstack
-        |   |-- sdn
-        |   |-- security_scan
-        |   `-- vnf
-        |-- tests
-        |   |-- __init__.py
-        |   `-- unit
-        `-- utils
-            |-- __init__.py
-            |-- config.py
-            |-- constants.py
-            |-- env.py
-            |-- functest_constants.py
-            |-- functest_logger.py
-            |-- functest_utils.py
-            |-- openstack
-            |-- openstack_clean.py
-            |-- openstack_snapshot.py
-            |-- openstack_tacker.py
-            `-- openstack_utils.py
-
-
-    (Note: All *.pyc files removed from above list for brevity...)
-
-We may distinguish several directories, the first level has 4 directories:
-
-* **commons**: This directory is dedicated for storage of traffic
-  profile or any other test inputs that could be reused by any test
-  project.
-* **docker**: This directory includes the needed files and tools to
-  build the Funtest Docker image.
-* **docs**: This directory includes documentation: Release Notes,
-  User Guide, Configuration Guide and Developer Guide. Test results
-  are also located in a sub--directory called 'results'.
-* **functest**: This directory contains all the code needed to run
-  functest internal cases and OPNFV onboarded feature or VNF test cases.
-
-Functest directory has 6 directories:
-  * **ci**: This directory contains test structure definition files
-    (e.g <filename>.yaml) and bash shell/python scripts used to
-    configure and execute Functional tests. The test execution script
-    can be executed under the control of Jenkins CI jobs.
-  * **cli**: This directory holds the python based Functest CLI utility
-    source code, which is based on the Python 'click' framework.
-  * **core**: This directory holds the python based Functest core
-      source code. Three abstraction classes have been created to ease
-      the integration of internal, feature or vnf cases.
-  * **opnfv_tests**: This directory includes the scripts required by
-    Functest internal test cases and other feature projects test cases.
-  * **tests**: This directory includes the functest unit tests
-  * **utils**: this directory holds Python source code for some general
-    purpose helper utilities, which testers can also re-use in their
-    own test code. See for an example the Openstack helper utility:
-    'openstack_utils.py'.
-
-Useful Docker commands
-----------------------
-When typing **exit** in the container prompt, this will cause exiting
-the container and probably stopping it. When stopping a running Docker
-container all the changes will be lost, there is a keyboard shortcut
-to quit the container without stopping it: <CTRL>-P + <CTRL>-Q. To
-reconnect to the running container **DO NOT** use the *run* command
-again (since it will create a new container), use the *exec* or *attach*
-command instead::
-
-  docker ps  # <check the container ID from the output>
-  docker exec -ti <CONTAINER_ID> /bin/bash
-
-There are other useful Docker commands that might be needed to manage possible
-issues with the containers.
-
-List the running containers::
-
-  docker ps
-
-List all the containers including the stopped ones::
-
-  docker ps -a
-
-Start a stopped container named "FunTest"::
-
-  docker start FunTest
-
-Attach to a running container named "StrikeTwo"::
-
-  docker attach StrikeTwo
-
-It is useful sometimes to remove a container if there are some problems::
-
-  docker rm <CONTAINER_ID>
-
-Use the *-f* option if the container is still running, it will force to
-destroy it::
-
-  docker rm -f <CONTAINER_ID>
-
-Check the Docker documentation dockerdocs_ for more information.
-
-Preparing the Functest environment
-----------------------------------
-Once the Functest docker container is up and running, the required
-Functest environment needs to be prepared. A custom built **functest**
-CLI utility is available to perform the needed environment preparation
-action. Once the environment is prepared, the **functest** CLI utility
-can be used to run different functional tests. The usage of the
-**functest** CLI utility to run tests is described further in the
-Functest User Guide `OPNFV_FuncTestUserGuide`_
-
-Prior to commencing the Functest environment preparation, we can check
-the initial status of the environment. Issue the **functest env status**
-command at the prompt::
-
-  functest env status
-  Functest environment is not installed.
-
-  Note: When the Functest environment is prepared, the command will
-  return the status: "Functest environment ready to run tests."
-
-To prepare the Functest docker container for test case execution, issue
-the **functest env prepare** command at the prompt::
-
-  functest env prepare
-
-This script will make sure that the requirements to run the tests are
-met and will install the needed libraries and tools by all Functest
-test cases. It should be run only once every time the Functest docker
-container is started from scratch. If you try to run this command, on
-an already prepared enviroment, you will be prompted whether you really
-want to continue or not::
-
-  functest env prepare
-  It seems that the environment has been already prepared.
-  Do you want to do it again? [y|n]
-
-  (Type 'n' to abort the request, or 'y' to repeat the
-   environment preparation)
-
-
-To list some basic information about an already prepared Functest
-docker container environment, issue the **functest env show** at the
-prompt::
-
-  functest env show
-  +======================================================+
-  | Functest Environment info                            |
-  +======================================================+
-  |  INSTALLER: apex, 192.168.122.89                     |
-  |   SCENARIO: os-odl_l2-nofeature-ha                   |
-  |        POD: localhost                                |
-  | GIT BRANCH: master                                   |
-  |   GIT HASH: 5bf1647dec6860464eeb082b2875798f0759aa91 |
-  | DEBUG FLAG: false                                    |
-  +------------------------------------------------------+
-  |     STATUS: ready                                    |
-  +------------------------------------------------------+
-
-  Where:
-
-  INSTALLER:  Displays the INSTALLER_TYPE value
-              - here = "apex"
-              and the INSTALLER_IP value
-              - here = "192.168.122.89"
-  SCENARIO:   Displays the DEPLOY_SCENARIO value
-              - here = "os-odl_l2-nofeature-ha"
-  POD:        Displays the value passed in NODE_NAME
-              - here = "localhost"
-  GIT BRANCH: Displays the git branch of the OPNFV Functest
-              project repository included in the Functest
-              Docker Container.
-              - here = "master"
-                       (In first official colorado release
-                        would be "colorado.1.0")
-  GIT HASH:   Displays the git hash of the OPNFV Functest
-              project repository included in the Functest
-              Docker Container.
-              - here = "5bf1647dec6860464eeb082b2875798f0759aa91"
-  DEBUG FLAG: Displays the CI_DEBUG value
-              - here = "false"
-
-  NOTE: In Jenkins CI runs, an additional item "BUILD TAG"
-        would also be listed. The valaue is set by Jenkins CI.
-
-Finally, the **functest** CLI has a **--help** options:
-
-Some examples::
-
-  functest --help Usage: functest [OPTIONS] COMMAND [ARGS]...
-
-  Options:
-    --version  Show the version and exit.
-    -h, --help Show this message and exit.
-
-  Commands:
-    env
-    openstack
-    testcase
-    tier
-
-  functest env --help
-  Usage: functest env [OPTIONS] COMMAND [ARGS]...
-
-  Options:
-    -h, --help Show this message and exit.
-
-  Commands:
-    prepare  Prepares the Functest environment.
-    show     Shows information about the current...
-    status   Checks if the Functest environment is ready...
-
-Checking Openstack and credentials
-----------------------------------
-It is recommended and fairly straightforward to check that Openstack
-and credentials are working as expected.
-
-Once the credentials are there inside the container, they should be
-sourced before running any Openstack commands::
-
-  source /home/opnfv/functest/conf/openstack.creds
-
-After this, try to run any OpenStack command to see if you get any
-output, for instance::
-
-  openstack user list
-
-This will return a list of the actual users in the OpenStack
-deployment. In any other case, check that the credentials are sourced::
-
-  env|grep OS_
-
-This command must show a set of environment variables starting with
-*OS_*, for example::
-
-  OS_REGION_NAME=RegionOne
-  OS_DEFAULT_DOMAIN=default
-  OS_PROJECT_NAME=admin
-  OS_PASSWORD=admin
-  OS_AUTH_STRATEGY=keystone
-  OS_AUTH_URL=http://172.30.10.3:5000/v2.0
-  OS_USERNAME=admin
-  OS_TENANT_NAME=admin
-  OS_ENDPOINT_TYPE=internalURL
-  OS_NO_CACHE=true
-
-If the OpenStack command still does not show anything or complains
-about connectivity issues, it could be due to an incorrect url given to
-the OS_AUTH_URL environment variable. Check the deployment settings.
-
-SSL Support
------------
-If you need to connect to a server that is TLS-enabled (the auth URL
-begins with "https") and it uses a certificate from a private CA or a
-self-signed certificate, then you will need to specify the path to an
-appropriate CA certificate to use, to validate the server certificate
-with the environment variable OS_CACERT::
-
-  echo $OS_CACERT
-  /etc/ssl/certs/ca.crt
-
-However, this certificate does not exist in the container by default.
-It has to be copied manually from the OpenStack deployment. This can be
-done in 2 ways:
-
-  #. Create manually that file and copy the contents from the OpenStack
-     controller.
-  #. (Recommended) Add the file using a Docker volume when starting the
-     container::
-
-       -v <path_to_your_cert_file>:/etc/ssl/certs/ca.cert
-
-You might need to export OS_CACERT environment variable inside the
-container::
-
-  export OS_CACERT=/etc/ssl/certs/ca.crt
-
-Certificate verification can be turned off using OS_INSECURE=true. For
-example, Fuel uses self-signed cacerts by default, so an pre step would
-be::
-
-  export OS_INSECURE=true
-
-Proxy support
--------------
-If your Jumphost node is operating behind a http proxy, then there are
-2 places where some special actions may be needed to make operations
-succeed:
-
-  #. Initial installation of docker engine First, try following the
-     official Docker documentation for Proxy settings. Some issues were
-     experienced on CentOS 7 based Jumphost. Some tips are documented
-     in section: `Docker Installation on CentOS behind http proxy`_
-     below.
-
-  #. Execution of the Functest environment preparation inside the
-     created docker container Functest needs internet access to
-     download some resources for some test cases. This might not
-     work properly if the Jumphost is connecting to internet
-     through a http Proxy.
-
-If that is the case, make sure the resolv.conf and the needed
-http_proxy and https_proxy environment variables, as well as the
-'no_proxy' environment variable are set correctly::
-
-  # Make double sure that the 'no_proxy=...' line in the
-  # 'openstack.creds' file is commented out first. Otherwise, the
-  # values set into the 'no_proxy' environment variable below will
-  # be ovewrwritten, each time the command
-  # 'source ~/functest/conf/openstack.creds' is issued.
-
-  cd ~/functest/conf/
-  sed -i 's/export no_proxy/#export no_proxy/' openstack.creds
-  source ./openstack.creds
-
-  # Next calculate some IP addresses for which http_proxy
-  # usage should be excluded:
-
-  publicURL_IP=$(echo $OS_AUTH_URL | grep -Eo "([0-9]+\.){3}[0-9]+")
-
-  adminURL_IP=$(openstack catalog show identity | \
-  grep adminURL | grep -Eo "([0-9]+\.){3}[0-9]+")
-
-  export http_proxy="<your http proxy settings>"
-  export https_proxy="<your https proxy settings>"
-  export no_proxy="127.0.0.1,localhost,$publicURL_IP,$adminURL_IP"
-
-  # Ensure that "git" uses the http_proxy
-  # This may be needed if your firewall forbids SSL based git fetch
-  git config --global http.sslVerify True
-  git config --global http.proxy <Your http proxy settings>
-
-Validation check: Before running **'functest env prepare'** CLI command,
-make sure you can reach http and https sites from inside the Functest
-docker container.
-
-For example, try to use the **nc** command from inside the functest
-docker container::
-
-  nc -v opnfv.org 80
-  Connection to opnfv.org 80 port [tcp/http] succeeded!
-
-  nc -v opnfv.org 443
-  Connection to opnfv.org 443 port [tcp/https] succeeded!
-
-Note: In a Jumphost node based on the CentOS family OS, the **nc**
-commands might not work. You can use the **curl** command instead.
-
-  curl http://www.opnfv.org:80
-  <HTML><HEAD><meta http-equiv="content-type"
-  .
-  .
-  </BODY></HTML>
-
-  curl https://www.opnfv.org:443
-  <HTML><HEAD><meta http-equiv="content-type"
-  .
-  .
-  </BODY></HTML>
-
-  (Ignore the content. If command returns a valid HTML page, it proves
-  the connection.)
-
-Docker Installation on CentOS behind http proxy
------------------------------------------------
-This section is applicable for CentOS family OS on Jumphost which
-itself is behind a proxy server. In that case, the instructions below
-should be followed **before** installing the docker engine::
-
-  1) # Make a directory '/etc/systemd/system/docker.service.d'
-     # if it does not exist
-     sudo mkdir /etc/systemd/system/docker.service.d
-
-  2) # Create a file called 'env.conf' in that directory with
-     # the following contents:
-     [Service]
-     EnvironmentFile=-/etc/sysconfig/docker
-
-  3) # Set up a file called 'docker' in directory '/etc/sysconfig'
-     # with the following contents:
-     HTTP_PROXY="<Your http proxy settings>"
-     HTTPS_PROXY="<Your https proxy settings>"
-     http_proxy="${HTTP_PROXY}"
-     https_proxy="${HTTPS_PROXY}"
-
-  4) # Reload the daemon
-     systemctl daemon-reload
-
-  5) # Sanity check - check the following docker settings:
-     systemctl show docker | grep -i env
-
-     Expected result:
-     ----------------
-     EnvironmentFile=/etc/sysconfig/docker (ignore_errors=yes)
-     DropInPaths=/etc/systemd/system/docker.service.d/env.conf
-
-Now follow the instructions in [`InstallDockerCentOS`_] to download
-and install the **docker-engine**. The instructions conclude with a
-"test pull" of a sample "Hello World" docker container. This should now
-work with the above pre-requisite actions.
-
-.. _dockerdocs: https://docs.docker.com/
-.. _dockerhub: https://hub.docker.com/r/opnfv/functest/
-.. _Proxy: https://docs.docker.com/engine/admin/systemd/#http-proxy
-.. _FunctestDockerTags: https://hub.docker.com/r/opnfv/functest/tags/
-.. _InstallDockerCentOS: https://docs.docker.com/engine/installation/linux/centos/
-.. _OPNFV_FuncTestUserGuide: http://artifacts.opnfv.org/functest/docs/userguide/index.html
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
deleted file mode 100644
index f12739e31..000000000
--- a/docs/configguide/index.rst
+++ /dev/null
@@ -1,296 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-==================================
-OPNFV FUNCTEST Configuration Guide
-==================================
-
-.. toctree::
-   :numbered:
-   :maxdepth: 2
-
-Version history
-===============
-
-+------------+----------+------------------+----------------------------------+
-| **Date**   | **Ver.** | **Author**       | **Comment**                      |
-|            |          |                  |                                  |
-+------------+----------+------------------+----------------------------------+
-| 2016-08-17 | 1.0.0    | Juha Haapavirta  | Colorado release                 |
-|            |          | Column Gaynor    |                                  |
-+------------+----------+------------------+----------------------------------+
-| 2017-01-19 | 1.0.1    | Morgan Richomme  | Adaptations for Danube           |
-|            |          |                  | * update testcase list           |
-|            |          |                  | * update docker command          |
-+------------+----------+------------------+----------------------------------+
-
-Introduction
-============
-This document describes how to install and configure Functest in OPNFV.
-The Functest CLI is utilized during the Functest environment preparation
-step. The given example commands should work in both virtual and bare
-metal cases alike.
-
-High level architecture
------------------------
-
-The high level architecture of Functest within OPNFV can be described as
-follows::
-
- CIMC/Lights+out management               Admin  Mgmt/API  Public  Storage Private
-                                           PXE
- +                                           +       +        +       +       +
- |                                           |       |        |       |       |
- |     +----------------------------+        |       |        |       |       |
- |     |                            |        |       |        |       |       |
- +-----+       Jumphost             |        |       |        |       |       |
- |     |                            +--------+       |        |       |       |
- |     |                            |        |       |        |       |       |
- |     |   +--------------------+   |        |       |        |       |       |
- |     |   |                    |   |        |       |        |       |       |
- |     |   | Tools              |   +----------------+        |       |       |
- |     |   | - Rally            |   |        |       |        |       |       |
- |     |   | - Robot            |   |        |       |        |       |       |
- |     |   | - TestON           |   |        |       |        |       |       |
- |     |   |                    |   |-------------------------+       |       |
- |     |   | Testcases          |   |        |       |        |       |       |
- |     |   | - VIM              |   |        |       |        |       |       |
- |     |   |  -- healthcheck    |   |        |       |        |       |       |
- |     |   |  -- vPing_ssh      |   |        |       |        |       |       |
- |     |   |  -- vPing_userdata |   |        |       |        |       |       |
- |     |   |  -- SNAPS_cases    |   |        |       |        |       |       |
- |     |   |  -- Tempest_smoke  |   |        |       |        |       |       |
- |     |   |  -- Rally_sanity   |   |        |       |        |       |       |
- |     |   |  -- Tempest_full   |   |        |       |        |       |       |
- |     |   |  -- Rally_full     |   |        |       |        |       |       |
- |     |   |                    |   |        |       |        |       |       |
- |     |   | - SDN Controller   |   |        |       |        |       |       |
- |     |   |  -- odl            |   |        |       |        |       |       |
- |     |   |  -- onos           |   |        |       |        |       |       |
- |     |   |                    |   |        |       |        |       |       |
- |     |   | - Features         |   |        |       |        |       |       |
- |     |   |                    |   |        |       |        |       |       |
- |     |   | - VNF              |   |        |       |        |       |       |
- |     |   |                    |   |        |       |        |       |       |
- |     |   +--------------------+   |        |       |        |       |       |
- |     |     Functest Docker        +        |       |        |       |       |
- |     |                            |        |       |        |       |       |
- |     |                            |        |       |        |       |       |
- |     |                            |        |       |        |       |       |
- |     +----------------------------+        |       |        |       |       |
- |                                           |       |        |       |       |
- |    +----------------+                     |       |        |       |       |
- |    |             1  |                     |       |        |       |       |
- +----+ +--------------+-+                   |       |        |       |       |
- |    | |             2  |                   |       |        |       |       |
- |    | | +--------------+-+                 |       |        |       |       |
- |    | | |             3  |                 |       |        |       |       |
- |    | | | +--------------+-+               |       |        |       |       |
- |    | | | |             4  |               |       |        |       |       |
- |    +-+ | | +--------------+-+             |       |        |       |       |
- |      | | | |             5  +-------------+       |        |       |       |
- |      +-+ | |  nodes for     |             |       |        |       |       |
- |        | | |  deploying     +---------------------+        |       |       |
- |        +-+ |  OPNFV         |             |       |        |       |       |
- |          | |                +------------------------------+       |       |
- |          +-+     SUT        |             |       |        |       |       |
- |            |                +--------------------------------------+       |
- |            |                |             |       |        |       |       |
- |            |                +----------------------------------------------+
- |            +----------------+             |       |        |       |       |
- |                                           |       |        |       |       |
- +                                           +       +        +       +       +
-              SUT = System Under Test
-
-All the libraries and dependencies needed by all of the Functest tools
-are pre-installed into the Docker image. This allows running Functest
-on any platform on any Operating System.
-
-The automated mechanisms inside the Functest Docker container will:
-
-  * Retrieve OpenStack credentials
-  * Prepare the environment according to the SUT
-  * Perform the appropriate functional tests
-  * Push the test results into the OPNFV test result database
-
-This Docker image can be integrated into CI or deployed independently.
-
-Please note that the Functest Docker container has been designed for
-OPNFV, however, it would be possible to adapt it to any VIM + controller
-environment, since most of the test cases are integrated from upstream
-communities.
-
-The functional test cases are described in the Functest User Guide `[2]`_
-
-
-Prerequisites
-=============
-The OPNFV deployment is out of the scope of this document but it can be
-found in http://docs.opnfv.org.
-The OPNFV platform is considered as the System Under Test (SUT) in this
-document.
-
-Several prerequisites are needed for Functest:
-
-    #. A Jumphost to run Functest on
-    #. A Docker daemon shall be installed on the Jumphost
-    #. A public/external network created on the SUT
-    #. An admin/management network created on the SUT
-    #. Connectivity from the Jumphost to the SUT public/external network
-    #. Connectivity from the Jumphost to the SUT admin/management network
-
-WARNING: Connectivity from Jumphost is essential and it is of paramount
-importance to make sure it is working before even considering to install
-and run Functest. Make also sure you understand how your networking is
-designed to work.
-
-NOTE: **Jumphost** refers to any server which meets the previous
-requirements. Normally it is the same server from where the OPNFV
-deployment has been triggered previously.
-
-NOTE: If your Jumphost is operating behind a company http proxy and/or
-Firewall, please consult first the section `Proxy Support`_, towards
-the end of this document. The section details some tips/tricks which
-*may* be of help in a proxified environment.
-
-Docker installation
--------------------
-Docker installation and configuration is only needed to be done once
-through the life cycle of Jumphost.
-
-If your Jumphost is based on Ubuntu, RHEL or CentOS linux, please
-consult the references below for more detailed instructions. The
-commands below are offered as a short reference.
-
-*Tip:* For running docker containers behind the proxy, you need first
-some extra configuration which is described in section
-`Docker Installation on CentOS behind http proxy`_. You should follow
-that section before installing the docker engine.
-
-Docker installation needs to be done as root user. You may use other
-userid's to create and run the actual containers later if so desired.
-Log on to your Jumphost as root user and install the Docker Engine
-(e.g. for CentOS family)::
-
- curl -sSL https://get.docker.com/ | sh
- systemctl start docker
-
- *Tip:* If you are working through proxy, please set the https_proxy
- environment variable first before executing the curl command.
-
-Add your user to docker group to be able to run commands without sudo::
-
- sudo usermod -aG docker <your_user>
-
-A reconnect is needed. There are 2 ways for this:
-    #. Re-login to your account
-    #. su - <username>
-
-References - Installing Docker Engine on different Linux Operating Systems:
-  * Ubuntu_
-  * RHEL_
-  * CentOS_
-
-.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/
-.. _RHEL:   https://docs.docker.com/engine/installation/linux/rhel/
-.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/
-
-Public/External network on SUT
-------------------------------
-Some of the tests against the VIM (Virtual Infrastructure Manager) need
-connectivity through an existing public/external network in order to
-succeed. This is needed, for example, to create floating IPs to access
-VM instances through the public/external network (i.e. from the Docker
-container).
-
-By default, the four OPNFV installers provide a fresh installation with
-a public/external network created along with a router. Make sure that
-the public/external subnet is reachable from the Jumphost.
-
-*Hint:* For the given OPNFV Installer in use, the IP sub-net address
-used for the public/external network is usually a planning item and
-should thus be known. Consult the OPNFV Configuration guide `[4]`_, and
-ensure you can reach each node in the SUT, from the Jumphost using the
-'ping' command using the respective IP address on the public/external
-network for each node in the SUT. The details of how to determine the
-needed IP addresses for each node in the SUT may vary according to the
-used installer and are therefore ommitted here.
-
-Connectivity to Admin/Management network on SUT
------------------------------------------------
-Some of the Functest tools need to have access to the OpenStack
-admin/management network of the controllers `[1]`_.
-
-For this reason, check the connectivity from the Jumphost to all the
-controllers in cluster in the OpenStack admin/management network range.
-
-Installation and configuration
-==============================
-
-.. include:: ./configguide.rst
-
-Integration in CI
-=================
-In CI we use the Docker image and execute the appropriate commands within the
-container from Jenkins.
-
-Docker creation in set-functest-env builder `[3]`_::
-
-    envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} -e NODE_NAME=${NODE_NAME}"
-    [...]
-    docker pull opnfv/functest:$DOCKER_TAG >/dev/null
-    cmd="sudo docker run -id ${envs} ${volumes} ${custom_params} ${TESTCASE_OPTIONS} opnfv/functest:${DOCKER_TAG} /bin/bash"
-    echo "Functest: Running docker run command: ${cmd}"
-    ${cmd} >${redirect}
-    sleep 5
-    container_id=$(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | awk '{print $1}' | head -1)
-    echo "Container ID=${container_id}"
-    if [ -z ${container_id} ]; then
-        echo "Cannot find opnfv/functest container ID ${container_id}. Please check if it is existing."
-        docker ps -a
-        exit 1
-    fi
-    echo "Starting the container: docker start ${container_id}"
-    docker start ${container_id}
-    sleep 5
-    docker ps >${redirect}
-    if [ $(docker ps | grep "opnfv/functest:${DOCKER_TAG}" | wc -l) == 0 ]; then
-        echo "The container opnfv/functest with ID=${container_id} has not been properly started. Exiting..."
-        exit 1
-    fi
-
-    cmd="python ${FUNCTEST_REPO_DIR}/functest/ci/prepare_env.py start"
-    echo "Executing command inside the docker: ${cmd}"
-    docker exec ${container_id} ${cmd}
-
-
-Test execution in functest-all builder `[3]`_::
-
-    branch=${GIT_BRANCH##*/}
-    echo "Functest: run $FUNCTEST_SUITE_NAME on branch ${branch}"
-    cmd="functest testcase run $FUNCTEST_SUITE_NAME"
-    fi
-    container_id=$(docker ps -a | grep opnfv/functest | awk '{print $1}' | head -1)
-    docker exec $container_id $cmd
-    ret_value=$?
-    exit $ret_value
-
-Docker clean in functest-cleanup builder `[3]`_ calling docker rm and docker rmi
-
-
-References
-==========
-.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
-.. _`[2]`: http://artifacts.opnfv.org/functest/docs/userguide/index.html
-.. _`[3]`: https://git.opnfv.org/cgit/releng/tree/jjb/functest/functest-ci-jobs.yml
-.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html
-
-
-OPNFV main site: opnfvmain_.
-
-OPNFV functional test page: opnfvfunctest_.
-
-IRC support channel: #opnfv-functest
-
-.. _opnfvmain: http://www.opnfv.org
-.. _opnfvfunctest: https://wiki.opnfv.org/functest