diff options
Diffstat (limited to 'functest/opnfv_tests')
30 files changed, 1501 insertions, 5 deletions
diff --git a/functest/opnfv_tests/openstack/rally/rally.py b/functest/opnfv_tests/openstack/rally/rally.py index a808d036..c16e6d13 100644 --- a/functest/opnfv_tests/openstack/rally/rally.py +++ b/functest/opnfv_tests/openstack/rally/rally.py @@ -60,8 +60,12 @@ class RallyBase(testcase.TestCase): FLAVOR_NAME = CONST.__getattribute__('rally_flavor_name') FLAVOR_ALT_NAME = CONST.__getattribute__('rally_flavor_alt_name') FLAVOR_EXTRA_SPECS = None + FLAVOR_RAM = 512 + FLAVOR_RAM_ALT = 1024 if hasattr(CONST, 'flavor_extra_specs'): FLAVOR_EXTRA_SPECS = CONST.__getattribute__('flavor_extra_specs') + FLAVOR_RAM = 1024 + FLAVOR_RAM_ALT = 2048 RALLY_DIR = pkg_resources.resource_filename( 'functest', 'opnfv_tests/openstack/rally') @@ -514,7 +518,7 @@ class RallyBase(testcase.TestCase): LOGGER.debug("Creating flavor '%s'...", self.flavor_name) flavor_creator = OpenStackFlavor( self.os_creds, FlavorConfig( - name=self.flavor_name, ram=512, disk=1, vcpus=1, + name=self.flavor_name, ram=self.FLAVOR_RAM, disk=1, vcpus=1, metadata=self.FLAVOR_EXTRA_SPECS)) if flavor_creator is None or flavor_creator.create() is None: raise Exception("Failed to create flavor") @@ -523,8 +527,8 @@ class RallyBase(testcase.TestCase): LOGGER.debug("Creating flavor '%s'...", self.flavor_alt_name) flavor_alt_creator = OpenStackFlavor( self.os_creds, FlavorConfig( - name=self.flavor_alt_name, ram=1024, disk=1, vcpus=1, - metadata=self.FLAVOR_EXTRA_SPECS)) + name=self.flavor_alt_name, ram=self.FLAVOR_RAM_ALT, disk=1, + vcpus=1, metadata=self.FLAVOR_EXTRA_SPECS)) if flavor_alt_creator is None or flavor_alt_creator.create() is None: raise Exception("Failed to create flavor") self.creators.append(flavor_alt_creator) diff --git a/functest/opnfv_tests/openstack/tempest/tempest.py b/functest/opnfv_tests/openstack/tempest/tempest.py index 979e992f..58882b99 100644 --- a/functest/opnfv_tests/openstack/tempest/tempest.py +++ b/functest/opnfv_tests/openstack/tempest/tempest.py @@ -438,6 +438,7 @@ class TempestResourcesManager(object): flavor_metadata_alt = None if 'ovs' in scenario or 'fdio' in scenario: flavor_metadata_alt = create_flavor.MEM_PAGE_SIZE_LARGE + CONST.__setattr__('openstack_flavor_ram', 1024) flavor_creator_alt = OpenStackFlavor( self.os_creds, FlavorConfig( name=CONST.__getattribute__( diff --git a/functest/opnfv_tests/openstack/vping/vping_base.py b/functest/opnfv_tests/openstack/vping/vping_base.py index f3d4d50f..df9774ec 100644 --- a/functest/opnfv_tests/openstack/vping/vping_base.py +++ b/functest/opnfv_tests/openstack/vping/vping_base.py @@ -156,12 +156,14 @@ class VPingBase(testcase.TestCase): "Creating flavor with name: '%s'", self.flavor_name) scenario = CONST.__getattribute__('DEPLOY_SCENARIO') flavor_metadata = None + flavor_ram = 512 if 'ovs' in scenario or 'fdio' in scenario: flavor_metadata = create_flavor.MEM_PAGE_SIZE_LARGE + flavor_ram = 1024 flavor_creator = OpenStackFlavor( self.os_creds, - FlavorConfig(name=self.flavor_name, ram=512, disk=1, vcpus=1, - metadata=flavor_metadata)) + FlavorConfig(name=self.flavor_name, ram=flavor_ram, disk=1, + vcpus=1, metadata=flavor_metadata)) flavor_creator.create() self.creators.append(flavor_creator) diff --git a/functest/opnfv_tests/vnf/epc/__init__.py b/functest/opnfv_tests/vnf/epc/__init__.py new file mode 100644 index 00000000..e69de29b --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/__init__.py diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/000-local-commands.feature b/functest/opnfv_tests/vnf/epc/featureFiles/000-local-commands.feature new file mode 100644 index 00000000..438e2c0e --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/000-local-commands.feature @@ -0,0 +1,12 @@ + Feature: Local_Commands_Testing + + @local-commands + Scenario: Local Commands testing + Given all configured endpoints for SSH are connected successfully + When I execute the command ifconfig in this system and check the presence of following strings in the response: + | responseResult | existence | + | inet | {string:nocase:present} | + | UP | {string:nocase:present} | + | BROADCAST | {string:nocase:present} | + | RUNNING | {string:nocase:present} | + | MULTICAST | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI.feature new file mode 100644 index 00000000..67831580 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI.feature @@ -0,0 +1,39 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature:Attach_Procedure_AttachWithIMSI + +@attach-procedure @Attach_Procedure_AttachWithIMSI @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 + +Scenario: Attach Procedure Success configured with AttachWithIMSI when Selected PLMN is neither the registered PLMN nor in the list of equivalent PLMNs + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MCC.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MCC.feature new file mode 100644 index 00000000..4e3cfd7b --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MCC.feature @@ -0,0 +1,32 @@ +############################################################################################################################ +# Date: <31/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature:Attach_Procedure_AttachWithIMSI_Wrong_MCC + +@attach-procedure @Attach_Procedure_AttachWithIMSI_Wrong_MCC @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 + +Scenario: Attach Procedure Failure due to wrong MCC. + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with EPC parameter "ABOT.ENB.mobile_country_code=201" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Received s1 setup failure for MME | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MNC.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MNC.feature new file mode 100644 index 00000000..6082db06 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_MNC.feature @@ -0,0 +1,33 @@ +############################################################################################################################ +# Date: <31/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature:Attach_Procedure_AttachWithIMSI_Wrong_MNC + +@attach-procedure @Attach_Procedure_AttachWithIMSI_Wrong_MNC @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 + +Scenario: Attach Procedure Failure due to wrong MNC. + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with EPC parameter "ABOT.ENB.mobile_network_code=95" on node ABOT + +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Received s1 setup failure for MME | {string:nocase:present} | + + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_TAC.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_TAC.feature new file mode 100644 index 00000000..855ffd63 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_AttachWithIMSI_Wrong_TAC.feature @@ -0,0 +1,33 @@ +############################################################################################################################ +# Date: <31/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature:Attach_Procedure_AttachWithIMSI_Wrong_TAC + +@attach-procedure @Attach_Procedure_AttachWithIMSI_Wrong_TAC @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 + +Scenario: Attach Procedure Failure due to wrong TAC + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with EPC parameter "ABOT.ENB.tracking_area_code=10" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Received s1 setup failure for MME | {string:nocase:present} | + + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_Attach_With_GUTI.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_Attach_With_GUTI.feature new file mode 100644 index 00000000..d6ca0369 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_Attach_With_GUTI.feature @@ -0,0 +1,36 @@ +############################################################################################################################ +# Date: <31/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature:Attach_Procedure_Attach_With_GUTI + +@attach-procedure @Attach_Procedure_Attach_With_GUTI @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +Scenario: Attach Procedure Success with right GUTI. + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with GUTI | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DNS_Server_Addr_Request.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DNS_Server_Addr_Request.feature new file mode 100644 index 00000000..f68e1812 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DNS_Server_Addr_Request.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With DNS Server Address Request Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_DNS_Server_Address_Request @PCO + +Scenario: Attach Procedure indicating a request DNS Server Address in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IPV6_DNS_SERVER_ADDR_REQ=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with DNS Server Address Request | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0003 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HA_Addr_Request.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HA_Addr_Request.feature new file mode 100644 index 00000000..92c38a2b --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HA_Addr_Request.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure with DSMIPv6 Home Agent Address Request Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_DSMIPv6_Home_Agent_Address_Request @PCO + +Scenario: Attach Procedure indicating a request for DSMIPv6 Home Agent Address in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IPV6_HA_ADDR_REQ=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with DSMIPv6 Home Agent Address Request | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0007 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HN_Prefix_Request.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HN_Prefix_Request.feature new file mode 100644 index 00000000..fe389028 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_HN_Prefix_Request.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With DSMIPv6 Home Network Prefix Request Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_DSMIPv6_Home_Network_Prefix_Request @PCO + +Scenario: Attach Procedure indicating a request for DSMIPv6 Home Network Prefix Request in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IPV6_HN_PREFIX_REQ=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with DSMIPv6 Home Network Prefix Request | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0008 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_IPv4_HA_Addr_Request.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_IPv4_HA_Addr_Request.feature new file mode 100644 index 00000000..5821cd55 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_DSMIPv6_IPv4_HA_Addr_Request.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With DSMIPv6 IPv4 Home Agent Address Request Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_DSMIPv6_IPv4_Home_Agent_Address_Request @PCO + +Scenario: Attach Procedure indicating a request for DSMIPv6 IPv4 Home Agent Address in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IPV6_IPV4_HA_ADDR_REQ=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with DSMIPv6 IPv4 Home Agent Address Request | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0009 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IM_CN_SS_Signalling_Flag.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IM_CN_SS_Signalling_Flag.feature new file mode 100644 index 00000000..81f4fbc4 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IM_CN_SS_Signalling_Flag.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With IM CN Subsystem Signalling Flag Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_IM_CN_Subsystem_Signalling_Flag @PCO + +Scenario: Attach Procedure indicating IM CN Subsystem Signalling Flag in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IM_CN_SS_SIGNAL_FLAG=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with IM CN Subsystem Signalling Flag | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0002 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_DHCPv4.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_DHCPv4.feature new file mode 100644 index 00000000..fba01f24 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_DHCPv4.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure with IPv4 Address Allocation Via DHCPv4 Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_IPv4_Address_Allocation_Via_DHCPv4 @PCO + +Scenario: Attach Procedure indicating IPv4 address allocation via DHCPv4 in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IP_ADDR_ALLOC_DHCPV4=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with IPv4 address allocation via DHCPv4 | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 000B | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_NAS_Signalling.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_NAS_Signalling.feature new file mode 100644 index 00000000..1cb869b4 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_IP_Addr_Alloc_NAS_Signalling.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With IP Address Allocation Via NAS Signalling Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_IP_Address_Allocation_Via_NAS_Signalling @PCO + +Scenario: Attach Procedure indicating IP address allocation via NAS signalling in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IP_ADDR_NAS_SIGNALING=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with IP address allocation via NAS signalling | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 000A | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_MS_Support_Bearer_Ctrl_Indication.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_MS_Support_Bearer_Ctrl_Indication.feature new file mode 100644 index 00000000..bfc7515c --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_MS_Support_Bearer_Ctrl_Indication.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With MS Support of Network Requested Bearer Control indicator in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_MS_Support_Network_Requested_Bearer_Control_Indicator @PCO + +Scenario: Attach Procedure indicating MS Support of Network Requested Bearer Control indicator + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.MS_SUPPORT_BEARER_CTRL_IND=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with MS Support of Network Requested Bearer Control indicator | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0005 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_P_CSCF_Addr_Request.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_P_CSCF_Addr_Request.feature new file mode 100644 index 00000000..605bb934 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Attach_Procedure_With_P_CSCF_Addr_Request.feature @@ -0,0 +1,44 @@ +############################################################################################################################ +# Date: <22/08/2016> Version: <1.1> # +############################################################################################################################ + +Feature: Attach Procedure With P-CSCF Address Request Indication in PCO + +@attach-procedure @TS_24_301 @24_301_5_5 @24_301_5_5_1_2_2 @TS_24_368 @24_368_4 @24_368-5_4 @Series-0000 +@TS_36_523_9_2_1_1_3 @Attach_Procedure_P-CSCF_Address_Request @PCO + +Scenario: Attach Procedure indicating a request for P-CSCF address in the protocol configuration options + +Given all configured endpoints for SSH are connected successfully + +Given the steps below will be executed at the end +When I stop S1AP simulator on node ABOT +When I run the SSH command "sudo service mme_gw restart" on node MME +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds +Then the ending steps are complete + +# Set ABOT configuration +Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT +Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + +Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.PCO.IPV6_P_CSCF_ADDR_REQ=true" on node ABOT + +# Execute ABOT S1AP Simulator +When I run S1AP simulator on node ABOT with 1 UE + +# Wait for execution to complete before checking results +Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + +# Validate Test Case Execution at Simulator +Then I receive S1AP response on node ABOT and verify the presence of all the following values: +| responseResult | existence | +| Send Attach Request message with IMSI | {string:nocase:present} | +| Send PDN Connectivity Request message with P-CSCF Address Request | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Authentication Request message | {string:nocase:present} | +| Send Authentication Response message | {string:nocase:present} | +| Received Security Mode Command message | {string:nocase:present} | +| Send Security Mode Complete message | {string:nocase:present} | +| Received Attach Accept message | {string:nocase:present} | +| Received Activate Default EPS Bearer Context Request message with PCO contain Protocol ID 0001 | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_Accept.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_Accept.feature new file mode 100644 index 00000000..3136dbdb --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_Accept.feature @@ -0,0 +1,45 @@ + ############################################################################################################################ + # Date: <13/01/2017> Version: <1.1> # + ############################################################################################################################ + + + Feature:Auth_Accept + + @authentication-procedure @Auth_Accept @TS_24_301 @24_301_5_4_2_1 @24_301_5_4_2_3 @33_401_6_1_1 @Series-0004 + + Scenario: UE receives an AUTHENTICATION REQUEST message. UE responds with a correct AUTHENTICATION RESPONSE message and establishes correct + EPS security context. + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # Set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + # Wait for execution to complete before checking results + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Identity Request message | {string:nocase:present} | + | Identification requested type = IMSI | {string:nocase:present} | + | Send Identity Response message | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Response message | {string:nocase:present} | + | Received Security Mode Command message | {string:nocase:present} | + | Send Security Mode Complete message | {string:nocase:present} | + | Received Attach Accept message | {string:nocase:present} | + + + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_AuthReject_re_Auth.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_AuthReject_re_Auth.feature new file mode 100644 index 00000000..fa0d3764 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_AuthReject_re_Auth.feature @@ -0,0 +1,47 @@ + ############################################################################################################################ + # Date: <22/11/2016> Version: <1.1> # + ############################################################################################################################ + + + Feature:Auth_NotAccept_by_Network_GUTIattach_AuthReject_re_Auth + + @authentication-procedure @Auth_NotAccept_by_Network_GUTIattach_AuthReject_re_Auth @TS_24_301 @24_301_5_3_3 @24_301_5_5_1_2_2 @24_301_5_5_1_2_4 @24_301_6_5_1_2 @24_301_9_9_3_33 @TS_36_304 @36_304_4_3 @negTCs @Series-0001 + + Scenario: Authentication not accepted by the network when attach with GUTI, Authentication reject when RES is different from UE and MME. IMSI given by the UE during the identification procedure is same from the IMSI the network had associated with the GUTI. + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + #RES is restored to 0x00 in teardown process + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0x00" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + # set the value of RES parameter (other than 0x00) manually in Authentication Response message which is sent from UE to MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0xFF" on node ABOT + + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Identity Request message | {string:nocase:present} | + | Identification requested type = IMSI | {string:nocase:present} | + | Send Identity Response message | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Response message | {string:nocase:present} | + | Received Authentication Reject message | {string:nocase:present} | + | Authentication not accepted by the network | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_IMSIdiff_AuthReject_re_Auth.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_IMSIdiff_AuthReject_re_Auth.feature new file mode 100644 index 00000000..4c00c878 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_GUTIattach_IMSIdiff_AuthReject_re_Auth.feature @@ -0,0 +1,38 @@ + ############################################################################################################################ + # Date: <22/11/2016> Version: <1.1> # + ############################################################################################################################ + + Feature:Auth_NotAccept_by_Network_GUTIattach_IMSIdiff_AuthReject_re_Auth + + @authentication-procedure @Auth_NotAccept_by_Network_GUTIattach_IMSIdiff_AuthReject_re_Auth @TS_24_301 @24_301_5_3_3 @24_301_5_5_1_2_2 @24_301_5_5_1_2_4 @24_301_6_5_1_2 @24_301_9_9_3_33 @TS_36_304 @36_304_4_3 @negTCs @Series-0001 + + Scenario: Authentication not accepted by the network when attach with GUTI, Authentication reject when RES is different from UE and MME. IMSI given by the UE during the identification procedure differs from the IMSI the network had associated with the GUTI + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0x00" on node ABOT + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.WRONGIMSI=false" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + # set the value of RES parameter (other than 0x00) manually in Authentication Response message which is sent from UE to MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0xFF" on node ABOT + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.WRONGIMSI=true" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_IMSIattach_AuthReject_re_Auth.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_IMSIattach_AuthReject_re_Auth.feature new file mode 100644 index 00000000..cce93f42 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_Network_IMSIattach_AuthReject_re_Auth.feature @@ -0,0 +1,62 @@ + ############################################################################################################################ + # Date: <22/11/2016> Version: <1.1> # + ############################################################################################################################ + + Feature:Auth_NotAccept_by_Network_IMSIattach_AuthReject_re_Auth + + @authentication-procedure @Auth_NotAccept_by_Network_IMSIattach_AuthReject_re_Auth @TS_24_301 @24_301_5_3_3 @24_301_5_5_1_2_2 @24_301_5_5_1_2_4 @24_301_6_5_1_2 @24_301_9_9_3_33 @TS_36_304 @36_304_4_3 @negTCs @Series-0001 + + Scenario: Authentication not accepted by the network when attach with IMSI, Authentication reject when RES is different from UE and MME + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + #RES is restore to 0x00 in teardown process + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0x00" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + # set the value of RES parameter (other than 0x00) manually in Authentication Response message which is sent from UE to MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.RES=0xFF" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with IMSI | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Response message | {string:nocase:present} | + | Received Authentication Reject message | {string:nocase:present} | + | Authentication not accepted by the network | {string:nocase:present} | + + + + + + + + + + + + + + + + + + + + + + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_GUTIattach_MAC_code_failure.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_GUTIattach_MAC_code_failure.feature new file mode 100644 index 00000000..ca5b281f --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_GUTIattach_MAC_code_failure.feature @@ -0,0 +1,45 @@ + ############################################################################################################################ + # Date: <13/12/2016> Version: <1.1> # + ############################################################################################################################ + + Feature:Auth_NotAccept_by_UE_GUTIattachMAC_code_failure + + @authentication-procedure @Auth_NotAccept_by_UE_GUTIattach_MAC_code_failure @TS_24_301 @24_301_5_4_2_6 @24_301_5_4_2_7 @negTCs @Series-0002 + + Scenario: UE received invalid MAC code in AUTN parameter in the AUTHENTICATION REQUEST message. Authentication not accepted by the UE when attach with GUTI. UE responds the Authentication failure message with EMM cause (reject cause) #20 "MAC failure". + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.USIM_API_K=\"8BAF473F2F8FD09487CCCBD7097C6862\"" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + + # CORRECT K_VALUE is 8BAF473F2F8FD09487CCCBD7097C6862 WRONG K_VALUE fec86ba6eb707ed08905757b1bb44b8f + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.USIM_API_K=\"fec86ba6eb707ed08905757b1bb44b8f\"" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Identity Request message | {string:nocase:present} | + | Identification requested type = IMSI | {string:nocase:present} | + | Send Identity Response message | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Failure message (cause=20) | {string:nocase:present} | + | Received Authentication Reject message | {string:nocase:present} | + | Authentication not accepted by the network | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_IMSIattach_MAC_code_failure.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_IMSIattach_MAC_code_failure.feature new file mode 100644 index 00000000..2b8cf401 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_IMSIattach_MAC_code_failure.feature @@ -0,0 +1,42 @@ + ############################################################################################################################ + # Date: <13/12/2016> Version: <1.1> # + ############################################################################################################################ + + Feature:Auth_NotAccept_by_UE_IMSIattach_MAC_code_failure + + @authentication-procedure @Auth_NotAccept_by_UE_IMSIattach_MAC_code_failure @TS_24_301 @24_301_5_4_2_6 @24_301_5_4_2_7 @negTCs @Series-0002 + + Scenario: UE received invalid MAC code in AUTN parameter in the AUTHENTICATION REQUEST message. Authentication not accepted by the UE when attach with IMSI. UE responds the Authentication failure message with EMM cause (reject cause) #20 "MAC failure". + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + # WRONGIMSI is restored to false in teardown process + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.USIM_API_K_VALUE=\"8BAF473F2F8FD09487CCCBD7097C6862\"" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + + # CORRECT K_VALUE is 8BAF473F2F8FD09487CCCBD7097C6862 WRONG K_VALUE fec86ba6eb707ed08905757b1bb44b8f + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.USIM_API_K=\"fec86ba6eb707ed08905757b1bb44b8f\"" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with IMSI | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Failure message (cause=20) | {string:nocase:present} | + | Received Authentication Reject message | {string:nocase:present} | + | Authentication not accepted by the network | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_SQN_failure.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_SQN_failure.feature new file mode 100644 index 00000000..ff2a2e20 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_SQN_failure.feature @@ -0,0 +1,46 @@ + ############################################################################################################################ + # Date: <13/01/2017> Version: <1.1> # + ############################################################################################################################ + + + Feature:Auth_NotAccept_by_UE_SQN_failure + + @authentication-procedure @Auth_NotAccept_by_UE_SQN_failure @TS_24_301 @24_301_5_4_2_6 @24_301_5_4_2_7 @negTCs @Series-0004 + + Scenario: UE receives an AUTHENTICATION REQUEST message with SQN out of range. UE sends an AUTHENTICATION FAILURE message to the network, with EMM cause "synch failure" and a re-synchronization token. Now UE receives a new correct AUTHENTICATION REQUEST message while T3420 is running. Finally UE sends a correct AUTHENTICATION RESPONSE message. + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.SYNC_FAILURE=false" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.SYNC_FAILURE=true" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Identity Request message | {string:nocase:present} | + | Identification requested type = IMSI | {string:nocase:present} | + | Send Identity Response message | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Failure message (cause=21) | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Response message | {string:nocase:present} | + | Received Security Mode Command message | {string:nocase:present} | + | Send Security Mode Complete message | {string:nocase:present} | + | Received Attach Accept message | {string:nocase:present} | diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_non_EPS_AuthUnaccpt.feature b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_non_EPS_AuthUnaccpt.feature new file mode 100644 index 00000000..372e6b79 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/Auth_NotAccept_by_UE_non_EPS_AuthUnaccpt.feature @@ -0,0 +1,45 @@ + ############################################################################################################################ + # Date: <13/01/2017> Version: <1.1> # + ############################################################################################################################ + + + Feature:Auth_NotAccept_by_UE_non_EPS_AuthUnaccpt + + @authentication-procedure @Auth_NotAccept_by_UE_non_EPS_AuthUnaccpt @TS_24_301 @24_301_5_4_2_6 @24_301_5_4_2_7 @negTCs @Series-0004 @SS_changesReqd + + Scenario: UE receives an AUTHENTICATION REQUEST message with "separation bit" in the AMF field is 0. UE shall send an AUTHENTICATION FAILURE message to the network, with the reject cause #26 "non-EPS authentication unacceptable" + + # AuC system changes required. HSS should send Authentication request message with AMF=AMF_RESYNCH amf = {0xff 0xff} + # file name kdf.c line no: 156 uint8_t amf[] = { 0xFF, 0xFF }; + + Given all configured endpoints for SSH are connected successfully + + Given the steps below will be executed at the end + When I stop S1AP simulator on node ABOT + When I run the SSH command "sudo service mme_gw restart" on node MME + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.SYNC_FAILURE=false" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=true" on node ABOT + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Then the ending steps are complete + + # set ABOT configuration + Given that I setup S1AP Simulator with default parameters specified in {abotprop.ABOT.EPC.Defaults} on node ABOT + Given that I setup S1AP Simulator with UE parameter "ABOT.UE.CONFIG.SECURITY.SYNC_FAILURE=true" on node ABOT + Given that I setup S1AP Simulator with USIM parameter "ABOT.UE.USIM.AttachWithImsi=false" on node ABOT + + # Execute ABOT S1AP Simulator + When I run S1AP simulator on node ABOT with 1 UE + + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + Given the execution is paused for {abotprop.WAIT_10_SEC} seconds + + # Validate Test Case Execution at Simulator + Then I receive S1AP response on node ABOT and verify the presence of all the following values: + | responseResult | existence | + | Send Attach Request message with GUTI | {string:nocase:present} | + | Received Identity Request message | {string:nocase:present} | + | Identification requested type = IMSI | {string:nocase:present} | + | Send Identity Response message | {string:nocase:present} | + | Received Authentication Request message | {string:nocase:present} | + | Send Authentication Failure message (cause=26) | {string:nocase:present} | + diff --git a/functest/opnfv_tests/vnf/epc/featureFiles/ResourceBundle.xml b/functest/opnfv_tests/vnf/epc/featureFiles/ResourceBundle.xml new file mode 100644 index 00000000..64297220 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/featureFiles/ResourceBundle.xml @@ -0,0 +1,4 @@ +<?xml version="1.0" encoding="ISO-8859-1" ?> +<message-bundle> + +</message-bundle>
\ No newline at end of file diff --git a/functest/opnfv_tests/vnf/epc/juju_epc.py b/functest/opnfv_tests/vnf/epc/juju_epc.py new file mode 100644 index 00000000..8e2bca22 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/juju_epc.py @@ -0,0 +1,502 @@ +#!/usr/bin/env python + +# Copyright (c) 2016 Rebaca and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +"""Juju testcase implementation.""" + +import logging +import shutil +import os +import time +import json +import sys +from copy import deepcopy +import yaml +import functest.utils.openstack_utils as os_utils +import functest.core.vnf as vnf +import pkg_resources + +from functest.opnfv_tests.openstack.snaps import snaps_utils +from functest.utils.constants import CONST + +from snaps.openstack.os_credentials import OSCreds +from snaps.openstack.create_network import (NetworkSettings, + SubnetSettings, OpenStackNetwork) +from snaps.openstack.create_router import (RouterSettings, OpenStackRouter) +from snaps.openstack.create_flavor import (FlavorSettings, OpenStackFlavor) +from snaps.openstack.create_image import (ImageSettings, OpenStackImage) +from snaps.openstack.tests import openstack_tests +from snaps.openstack.utils import keystone_utils + +__author__ = "Amarendra Meher <amarendra@rebaca.com>" +__author__ = "Soumaya K Nayek <soumaya.nayek@rebaca.com>" + + +class JujuEpc(vnf.VnfOnBoarding): + """Abot EPC deployed with JUJU Orchestrator Case""" + + __logger = logging.getLogger(__name__) + + def __init__(self, **kwargs): + if "case_name" not in kwargs: + kwargs["case_name"] = "juju_epc" + super(JujuEpc, self).__init__(**kwargs) + + # Retrieve the configuration + self.case_dir = pkg_resources.resource_filename( + 'functest', 'opnfv_tests/vnf/epc') + try: + self.config = CONST.__getattribute__( + 'vnf_{}_config'.format(self.case_name)) + except Exception: + raise Exception("VNF config file not found") + config_file = os.path.join(self.case_dir, self.config) + self.orchestrator = dict( + requirements=get_config("orchestrator.requirements", config_file), + ) + + self.created_object = [] + self.snaps_creds = '' + + self.os_creds = openstack_tests.get_credentials( + os_env_file=CONST.__getattribute__('openstack_creds')) + + self.details['orchestrator'] = dict( + name=get_config("orchestrator.name", config_file), + version=get_config("orchestrator.version", config_file), + status='ERROR', + result='' + ) + + self.vnf = dict( + descriptor=get_config("vnf.descriptor", config_file), + requirements=get_config("vnf.requirements", config_file) + ) + self.details['vnf'] = dict( + descriptor_version=self.vnf['descriptor']['version'], + name=get_config("vnf.name", config_file), + version=get_config("vnf.version", config_file), + ) + self.__logger.debug("VNF configuration: %s", self.vnf) + + self.details['test_vnf'] = dict( + name=get_config("vnf_test_suite.name", config_file), + version=get_config("vnf_test_suite.version", config_file), + tag_name=get_config("vnf_test_suite.tag_name", config_file) + ) + self.images = get_config("tenant_images", config_file) + self.__logger.info("Images needed for vEPC: %s", self.images) + self.keystone_client = os_utils.get_keystone_client() + self.glance_client = os_utils.get_glance_client() + self.neutron_client = os_utils.get_neutron_client() + self.nova_client = os_utils.get_nova_client() + + def prepare(self): + """Prepare testcase (Additional pre-configuration steps).""" + self.__logger.debug("OS Credentials: %s", os_utils.get_credentials()) + + super(JujuEpc, self).prepare() + + self.__logger.info("Additional pre-configuration steps") + self.public_auth_url = keystone_utils.get_endpoint( + self.snaps_creds, 'identity') + + self.creds = { + "tenant": self.tenant_name, + "username": self.tenant_name, + "password": self.tenant_name, + "auth_url": os_utils.get_credentials()['auth_url'] + } + + self.snaps_creds = OSCreds( + username=self.creds['username'], + password=self.creds['password'], + auth_url=self.creds['auth_url'], + project_name=self.creds['tenant'], + identity_api_version=int(os_utils.get_keystone_client_version())) + + cloud_data = { + 'url': self.public_auth_url, + 'pass': self.tenant_name, + 'tenant_n': self.tenant_name, + 'user_n': self.tenant_name + } + self.__logger.info("Cloud DATA: %s", cloud_data) + self.filename = os.path.join(self.case_dir, 'abot-epc.yaml') + self.__logger.info("Cretae %s to add cloud info", self.filename) + write_config(self.filename, CLOUD_TEMPLATE, **cloud_data) + + if self.snaps_creds.identity_api_version == 3: + append_config(self.filename, '{}'.format( + os_utils.get_credentials()['project_domain_name']), + '{}'.format(os_utils.get_credentials() + ['user_domain_name'])) + + self.__logger.info("Upload some OS images if it doesn't exist") + for image_name, image_file in self.images.iteritems(): + self.__logger.info("image: %s, file: %s", image_name, image_file) + if image_file and image_name: + image_creator = OpenStackImage( + self.snaps_creds, + ImageSettings(name=image_name, + image_user='cloud', + img_format='qcow2', + image_file=image_file)) + image_creator.create() + self.created_object.append(image_creator) + + def deploy_orchestrator(self): + self.__logger.info("Deployed Orchestrator") + private_net_name = CONST.__getattribute__( + 'vnf_{}_private_net_name'.format(self.case_name)) + private_subnet_name = CONST.__getattribute__( + 'vnf_{}_private_subnet_name'.format(self.case_name)) + private_subnet_cidr = CONST.__getattribute__( + 'vnf_{}_private_subnet_cidr'.format(self.case_name)) + abot_router = CONST.__getattribute__( + 'vnf_{}_external_router'.format(self.case_name)) + dns_nameserver = CONST.__getattribute__( + 'vnf_{}_dns_nameserver'.format(self.case_name)) + ext_net_name = CONST.__getattribute__( + 'vnf_{}_external_network_name'.format(self.case_name)) + + self.__logger.info("Creating full network ...") + subnet_settings = SubnetSettings(name=private_subnet_name, + cidr=private_subnet_cidr, + dns_nameservers=dns_nameserver) + network_settings = NetworkSettings(name=private_net_name, + subnet_settings=[subnet_settings]) + network_creator = OpenStackNetwork(self.snaps_creds, network_settings) + network_creator.create() + self.created_object.append(network_creator) + + ext_net_name = snaps_utils.get_ext_net_name(self.snaps_creds) + self.__logger.info("Creating network Router ....") + router_creator = OpenStackRouter( + self.snaps_creds, + RouterSettings( + name=abot_router, + external_gateway=ext_net_name, + internal_subnets=[subnet_settings.name])) + router_creator.create() + self.created_object.append(router_creator) + self.__logger.info("Creating Flavor ....") + flavor_settings = FlavorSettings( + name=self.orchestrator['requirements']['flavor']['name'], + ram=self.orchestrator['requirements']['flavor']['ram_min'], + disk=10, + vcpus=1) + flavor_creator = OpenStackFlavor(self.snaps_creds, flavor_settings) + self.__logger.info("Juju Bootstrap: Skip creation of flavors") + flavor_creator.create() + self.created_object.append(flavor_creator) + self.__logger.info("Installing Dependency Packages .......") + source_dir = "/src/epc-requirements/juju_bin_build" + if os.path.exists(source_dir): + shutil.rmtree(source_dir) + os.makedirs(source_dir) + os.environ['GOPATH'] = str(source_dir) + os.environ['GOBIN'] = str(source_dir) + "/bin" + os.environ['PATH'] = ((os.path.expandvars('$GOPATH')) + ":" + + (os.path.expandvars('$GOBIN')) + ":" + + (os.path.expandvars('$PATH'))) + os.system('go get -d -v github.com/juju/juju/...') + os.chdir(source_dir + "/src" + "/github.com" + "/juju" + "/juju") + os.system('git checkout tags/juju-2.2.5') + os.system('go get github.com/rogpeppe/godeps') + os.system('godeps -u dependencies.tsv') + os.system('go install -v github.com/juju/juju/...') + self.__logger.info("Creating Cloud for Abot-epc .....") + os.system('juju add-cloud abot-epc -f {}'.format(self.filename)) + os.system('juju add-credential abot-epc -f {}'.format(self.filename)) + for image_name in self.images.keys(): + self.__logger.info("Generating Metadata for %s", image_name) + image_id = os_utils.get_image_id(self.glance_client, image_name) + os.system('juju metadata generate-image -d ~ -i {} -s {} -r ' + 'RegionOne -u {}'.format(image_id, + image_name, + self.public_auth_url)) + net_id = os_utils.get_network_id(self.neutron_client, private_net_name) + self.__logger.info("Credential information : %s", net_id) + juju_bootstrap_command = ('juju bootstrap abot-epc abot-controller ' + '--config network={} --metadata-source ~ ' + '--constraints mem=2G --bootstrap-series ' + 'trusty ' + '--config use-floating-ip=true --debug'. + format(net_id)) + os.system(juju_bootstrap_command) + return True + + def deploy_vnf(self): + """Deploy ABOT-OAI-EPC.""" + self.__logger.info("Upload VNFD") + descriptor = self.vnf['descriptor'] + self.__logger.info("Get or create flavor for all Abot-EPC") + flavor_settings = FlavorSettings( + name=self.vnf['requirements']['flavor']['name'], + ram=self.vnf['requirements']['flavor']['ram_min'], + disk=10, + vcpus=1) + flavor_creator = OpenStackFlavor(self.snaps_creds, flavor_settings) + flavor_creator.create() + self.created_object.append(flavor_creator) + self.__logger.info("Deploying Abot-epc bundle file ...") + os.system('juju deploy {}'.format('/' + descriptor.get('file_name'))) + self.__logger.info("Waiting for instances .....") + status = os.system('juju-wait') + self.__logger.info("juju wait completed: %s", status) + self.__logger.info("Deployed Abot-epc on Openstack") + if status == 0: + instances = os_utils.get_instances(self.nova_client) + for items in instances: + metadata = get_instance_metadata(self.nova_client, items) + if 'juju-units-deployed' in metadata: + sec_group = ('juju-' + metadata['juju-controller-uuid'] + + '-' + metadata['juju-model-uuid']) + self.sec_group_id = os_utils.get_security_group_id( + self.neutron_client, sec_group) + break + self.__logger.info("Adding Security group rule....") + os_utils.create_secgroup_rule(self.neutron_client, + self.sec_group_id, 'ingress', 132) + self.__logger.info("Copying the feature files to Abot_node ") + os.system('juju scp -- -r {}/featureFiles abot-' + 'epc-basic/0:~/'.format(self.case_dir)) + self.__logger.info("Copying the feature files in Abot_node ") + os.system("juju ssh abot-epc-basic/0 'sudo rsync -azvv " + "~/featureFiles /etc/rebaca-test-suite" + "/featureFiles'") + count = 0 + while count < 10: + epcstatus = os.system('juju status oai-epc | ' + 'grep {} | grep {} | grep {}' + .format('EPC', 'is', 'running')) + if epcstatus == 0: + break + else: + time.sleep(60) + count = count + 1 + os.system('juju-wait') + return True + else: + return False + + def test_vnf(self): + start_time = time.time() + self.__logger.info("Running VNF Test cases....") + os.system('juju run-action abot-epc-basic/0 run ' + 'tagnames={}'.format(self.details['test_vnf']['tag_name'])) + os.system('juju-wait') + duration = time.time() - start_time + self.__logger.info("Getting results from Abot node....") + os.system('juju scp abot-epc-basic/0:/var/lib/abot-' + 'epc-basic/artifacts/TestResults.json {}/.' + .format(self.case_dir)) + self.__logger.info("Parsing the Test results...") + res = (process_abot_test_result('{}/TestResults.' + 'json'.format(self.case_dir))) + short_result = sig_test_format(res) + self.__logger.info(short_result) + self.details['test_vnf'].update(status='PASS', + result=short_result, + full_result=res, + duration=duration) + + self.__logger.info("Test VNF result: Passed: %d, Failed:" + "%d, Skipped: %d", short_result['passed'], + short_result['failures'], short_result['skipped']) + return True + + def clean(self): + try: + if not self.orchestrator['requirements']['preserve_setup']: + self.__logger.info("Removing deployment files...") + testresult = os.path.join(self.case_dir, 'TestResults.json') + if os.path.exists(testresult): + os.remove(testresult) + self.__logger.info("Removing %s file ", self.filename) + if os.path.exists(self.filename): + os.remove(self.filename) + self.__logger.info("Destroying Orchestrator...") + os.system('juju destroy-controller -y abot-controller ' + '--destroy-all-models') + except: + self.__logger.warn("Some issue during the undeployment ..") + self.__logger.warn("Tenant clean continue ..") + + if not self.orchestrator['requirements']['preserve_setup']: + self.__logger.info('Remove the Abot_epc OS object ..') + for creator in reversed(self.created_object): + try: + creator.clean() + except Exception as exc: + self.__logger.error('Unexpected error cleaning - %s', exc) + + self.__logger.info("Releasing all the floating IPs") + # user_id = os_utils.get_user_id(self.keystone_client, + # self.tenant_name) + floating_ips = os_utils.get_floating_ips(self.neutron_client) + tenant_id = os_utils.get_tenant_id(self.keystone_client, + self.tenant_name) + self.__logger.info("TENANT ID : %s", tenant_id) + for item in floating_ips: + if item['tenant_id'] == tenant_id: + os_utils.delete_floating_ip(self.neutron_client, + item['id']) + self.__logger.info("Cleaning Projects and Users") + for creator in reversed(self.created_object): + try: + creator.clean() + except Exception as exc: # pylint: disable=broad-except + self.__logger.error('Unexpected error cleaning - %s', exc) + return True + + +# ---------------------------------------------------------- +# +# YAML UTILS +# +# ----------------------------------------------------------- +def get_config(parameter, file_path): + """ + Returns the value of a given parameter in file.yaml + parameter must be given in string format with dots + Example: general.openstack.image_name + """ + with open(file_path) as config_file: + file_yaml = yaml.safe_load(config_file) + config_file.close() + value = file_yaml + for element in parameter.split("."): + value = value.get(element) + if value is None: + raise ValueError("The parameter %s is not defined in" + " reporting.yaml" % parameter) + return value + + +def sig_test_format(sig_test): + """ + Process the signaling result to have a short result + """ + nb_passed = 0 + nb_failures = 0 + nb_skipped = 0 + for data_test in sig_test: + if data_test['result'] == "passed": + nb_passed += 1 + elif data_test['result'] == "failed": + nb_failures += 1 + elif data_test['result'] == "skipped": + nb_skipped += 1 + total_sig_test_result = {} + total_sig_test_result['passed'] = nb_passed + total_sig_test_result['failures'] = nb_failures + total_sig_test_result['skipped'] = nb_skipped + return total_sig_test_result + + +def process_abot_test_result(file_path): + """ Process ABoT Result """ + with open(file_path) as test_result: + data = json.load(test_result) + res = [] + for tests in data: + tests = update_data(tests) + try: + flatten_steps = tests['elements'][0].pop('flatten_steps') + for steps in flatten_steps: + steps['result'] = steps['step_status'] + res.append(steps) + except: + logging.error("Could not post data to ElasticSearch host") + raise + return res + + +def update_data(obj): + """ Update Result data""" + try: + obj['feature_file'] = os.path.splitext(os.path.basename(obj['uri']))[0] + + for element in obj['elements']: + element['final_result'] = "passed" + element['flatten_steps'] = [] + + for step in element['steps']: + temp_dict = {} + step['result'][step['result']['status']] = 1 + if step['result']['status'].lower() in ['fail', 'failed']: + element['final_result'] = "failed" + + temp_dict['feature_file'] = obj['feature_file'] + temp_dict['step_name'] = step['name'] + temp_dict['step_status'] = step['result']['status'] + temp_dict['step_duration'] = step['result'].get('duration', 0) + temp_dict['step_' + step['result']['status']] = 1 + element['flatten_steps'].append(deepcopy(temp_dict)) + + # Need to put the tag in OBJ and not ELEMENT + if 'tags' in obj: + element['tags'] = deepcopy(obj['tags']) + for tag in obj['tags']: + element[tag['name']] = 1 + else: + for tag in element['tags']: + element[tag['name']] = 1 + + except: + logging.error("Error in updating data, %s" % (sys.exc_info()[0])) + raise + + return obj + + +def get_instance_metadata(nova_client, instance): + """ Get instance Metadata - Instance ID """ + try: + instance = nova_client.servers.get(instance.id) + return instance.metadata + except Exception as e: + logging.error("Error [get_instance_status(nova_client)]: %s" % e) + return None + + +CLOUD_TEMPLATE = """clouds: + abot-epc: + type: openstack + auth-types: [userpass] + endpoint: {url} + regions: + RegionOne: + endpoint: {url} +credentials: + abot-epc: + abot-epc: + auth-type: userpass + password: {pass} + tenant-name: {tenant_n} + username: {user_n}""" + + +def write_config(fname, template, **kwargs): + """ Generate yaml from template for addinh cloud in juju """ + with open(fname, 'w') as yfile: + yfile.write(template.format(**kwargs)) + + +def append_config(file_name, p_domain, u_domain): + """ Append values into a yaml file """ + with open(file_name) as yfile: + doc = yaml.load(yfile) + doc['credentials']['abot-epc']['abot-epc']['project-domain-name'] = ( + p_domain) + doc['credentials']['abot-epc']['abot-epc']['user-domain-name'] = ( + u_domain) + + with open(file_name, 'w') as yfile: + yaml.safe_dump(doc, yfile, default_flow_style=False) diff --git a/functest/opnfv_tests/vnf/epc/juju_epc.yaml b/functest/opnfv_tests/vnf/epc/juju_epc.yaml new file mode 100644 index 00000000..33eeb211 --- /dev/null +++ b/functest/opnfv_tests/vnf/epc/juju_epc.yaml @@ -0,0 +1,32 @@ +--- +tenant_images: + trusty: + /home/opnfv/functest/images/ubuntu-14.04-server-cloudimg-amd64-disk1.img + xenial: + /home/opnfv/functest/images/ubuntu-16.04-server-cloudimg-amd64-disk1.img + +orchestrator: + name: juju + version: '2.0' + requirements: + dep_package: 'software-properties-common' + flavor: + name: m1.small + ram_min: 2048 + preserve_setup: false +vnf: + name: juju_epc + version: '1' + descriptor: + name: abot-oai-epc + file_name: + /src/epc-requirements/abot_charm/functest-abot-epc-bundle/bundle.yaml + version: '1' + requirements: + flavor: + name: m1.medium + ram_min: 4096 +vnf_test_suite: + name: abot-epc-basic + version: "3.1.0" + tag_name: "TS_24_301" |