aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/configguide/index.rst128
-rw-r--r--docs/userguide/index.rst190
2 files changed, 318 insertions, 0 deletions
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
new file mode 100644
index 00000000..47e430d2
--- /dev/null
+++ b/docs/configguide/index.rst
@@ -0,0 +1,128 @@
+===============================================
+OPNFV FUNCTEST configuration/installation guide
+===============================================
+
+.. contents::
+
+------------
+Introduction
+------------
+
+** DOCUMENT IS IN PROGRESS FOR BRAHMAPUTRA **
+
+.. _prereqs:
+
+-------------
+Prerequisites
+-------------
+
+The installation of the OPNFV solution is out of scope of this document but can be found XXX.
+In the rest of the document the OPNFV solution would be considered as the System Under Test (SUT).
+
+The installation and configuration of the tools needed to perform the tests will be described in the following sections.
+
+Since Arno SR1, the tools are automatically installed. Manual sourcing of OpenStack credentials is no more required if you are fully integrated in the continuous integration.
+A script has been added to automatically retrieve the credentials.
+However, if you still install manually functest, you will need to source the rc file on the machine you are running the tests.
+More details will be provided in the configuration section.
+
+.. _pharos: https://wiki.opnfv.org/pharos
+
+It is recommended to install the different tools on the jump host server as defined in the pharos_ project.
+
+For functest, the following libraries are needed. You can install them either with yum install or apt-get install, depending on your operating system:
+ * python-pip
+ * python-dev
+ * libffi-dev
+ * libxml2-dev
+ * libxslt1-dev
+
+You will also need some Python modules:
+ * sudo pip install GitPython
+ * sudo pip install python-novaclient
+ * sudo pip install python-neutronclient
+ * sudo pip install python-glanceclient
+ * sudo pip install python-keystoneclient
+
+
+The high level architecture can be described as follow::
+
+ CIMC/Lights+out management Admin Private Public Storage
+ PXE
+ +
+ + + IP_PRIV/24 | |
+ | | + + |
+ | | | IP_PUB/24 |
+ | +-----------------+ | | + |
+ | | | | | | |
+ +-----+ Jumpserver | | | | |
+ | | +---------------------+ | | |
+ | | | | | | |
+ | | +----------+ | | | | |
+ | | | Rally | +---- --------------------------+ | |
+ | | | | | | | | |
+ | | | Robot | | | | | |
+ | | | | | | | | |
+ | | | vPing | | | | | |
+ | | | | | | | | |
+ | | | Tempest | | | | | |
+ | | +----------+ | | | | |
+ | | FuncTest +-----------------------------------------+ |
+ | | | | | | |
+ | | +--------------------------------------------------+
+ | | | | | | |
+ | +-----------------+ | | | |
+ | | | | |
+ | +----------------+ | | | |
+ | | 1 | | | | |
+ +----+ +--------------+-+ | | | |
+ | | | 2 | | | | |
+ | | | +--------------+-+ | | | |
+ | | | | 3 | | | | |
+ | | | | +--------------+-+ | | | |
+ | | | | | 4 | | | | |
+ | +-+ | | +--------------+-+ | | | |
+ | | | | | 5 +---------------+ | | |
+ | +-+ | | nodes for | | | | |
+ | | | | deploying +-------------------------+ | |
+ | +-+ | opnfv | | | | |
+ | | | SUT +-----------------------------------+ |
+ | +-+ | | | | |
+ | | +--------------------------------------------+
+ | +----------------+ | | | |
+ | | | | |
+ | + + + +
+
+
+.. _tooling_installation:
+
+------------
+Installation
+------------
+
+-------------
+Configuration
+-------------
+
+-----------------
+Integration in CI
+-----------------
+
+
+
+----------
+References
+----------
+
+OPNFV main site: opnfvmain_.
+
+OPNFV functional test page: opnfvfunctest_.
+
+IRC support chan: #opnfv-testperf
+
+.. _opnfvmain: http://www.opnfv.org
+.. _opnfvfunctest: https://wiki.opnfv.org/opnfv_functional_testing
+.. _`OpenRC`: http://docs.openstack.org/user-guide/common/cli_set_environment_variables_using_openstack_rc.html
+.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html
+.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py
+.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml
diff --git a/docs/userguide/index.rst b/docs/userguide/index.rst
new file mode 100644
index 00000000..0eabac21
--- /dev/null
+++ b/docs/userguide/index.rst
@@ -0,0 +1,190 @@
+===========================
+OPNFV FUNCTEST user guide
+===========================
+
+.. contents::
+
+
+.. _introduction:
+
+DOCUMENT IS IN PROGRESS FOR BRAHMAPUTRA
+
+------------
+Introduction
+------------
+
+.. _description:
+
+-----------------------------
+Description of the test cases
+-----------------------------
+
+vPing
+=====
+
+The goal of this test can be described as follow::
+
+ vPing testcase
+ +-------------+ +-------------+
+ | | | |
+ | | | |
+ | | Boot VM1 | |
+ | +------------------>| |
+ | | | |
+ | | Get IP VM1 | |
+ | +------------------>| |
+ | Tester | | System |
+ | | Boot VM2 | Under |
+ | +------------------>| Test |
+ | | VM2 pings VM1 | |
+ | | | |
+ | | Check console log | |
+ | | If ping: | |
+ | | exit OK | |
+ | | else (timeout) | |
+ | | exit KO | |
+ | | | |
+ | | | |
+ +-------------+ +-------------+
+
+
+This example, using OpenStack Python clients can be considered as an "Hello World" example and may be modified for future use.
+
+In SR1, some code has been added in order to push the results (status and duration) into a centralized test result database.
+
+SDN Controllers
+===============
+
+OpenDaylight
+------------
+
+The ODL suite consists in a set of basic tests inherited from ODL project. The suite tests the creation and deletion of network, subnet, port though OpenDaylight and Neutron.
+
+The list of tests can be described as follow:
+ * Restconf.basic: Get the controller modules via Restconf
+ * Neutron.Networks
+
+ * Check OpenStack Networks :: Checking OpenStack Neutron for known networks
+ * Check OpenDaylight Networks :: Checking OpenDaylight Neutron API
+ * Create Network :: Create new network in OpenStack
+ * Check Network :: Check Network created in OpenDaylight
+ * Neutron.Networks :: Checking Network created in OpenStack are pushed
+
+ * Neutron.Subnets
+
+ * Check OpenStack Subnets :: Checking OpenStack Neutron for known Subnets
+ * Check OpenDaylight subnets :: Checking OpenDaylight Neutron API
+ * Create New subnet :: Create new subnet in OpenStack
+ * Check New subnet :: Check new subnet created in OpenDaylight
+ * Neutron.Subnets :: Checking Subnets created in OpenStack are pushed
+
+ * Neutron.Ports
+
+ * Check OpenStack ports :: Checking OpenStack Neutron for known ports
+ * Check OpenDaylight ports :: Checking OpenDaylight Neutron API
+ * Create New Port :: Create new port in OpenStack
+ * Check New Port :: Check new subnet created in OpenDaylight
+ * Neutron.Ports :: Checking Port created in OpenStack are pushed
+
+ * Delete Ports
+
+ * Delete previously created subnet in OpenStack
+ * Check subnet deleted in OpenDaylight
+ * Check subnet deleted in OpenStack
+
+ * Delete network
+
+ * Delete previously created network in OpenStack
+ * Check network deleted in OpenDaylight
+ * Check network deleted in OpenStack
+
+
+ONOS
+----
+TODO
+
+OpenContrail
+------------
+
+TODO
+
+
+Tempest
+=======
+
+.. _Tempest: http://docs.openstack.org/developer/tempest/overview.html
+
+Tempest_ is the OpenStack Integration Test Suite. We use Rally to run Tempest suite.
+
+The Tempest.conf configuration file is automatically generated by Rally then the Tempest suite is run, each test duration is measured.
+
+We considered the smoke test suite for Arno.
+
+The goal of this test is to to check the basic OpenStack functionality on a fresh installation.
+
+vIMS
+====
+
+TODO
+
+Rally bench test suite
+======================
+
+.. _Rally: https://wiki.openstack.org/wiki/Rally
+
+Rally bench test suite consist in a suite of light performance tests on some of the OpenStack components.
+
+The goal of this test suite is to test the different modules of OpenStack and get significant figures that could help us to define telco Cloud KPI.
+
+The OPNFV scenarios are based on the collection of the existing Rally_ scenarios:
+ * authenticate
+ * cinder
+ * nova
+ * requests
+ * glance
+ * keystone
+ * neutron
+ * quotas
+
+
+This test suite provides performance information on VIM (OpenStack) part.
+
+No SLA were defined for release 1, we just consider whether the tests are passed or failed.
+
+In the future SLA shall be defined (e.g. accepting booting time for a given image with a given flavour).
+
+Through its integration in Continuous Integration, the evolution of the performance of these tests shall also be considered.
+
+Feature projects
+================
+
+--------------
+Manual testing
+--------------
+
+------------------
+Automated testing
+------------------
+
+---------------
+Troubleshooting
+---------------
+
+
+
+----------
+References
+----------
+
+OPNFV main site: opnfvmain_.
+
+OPNFV functional test page: opnfvfunctest_.
+
+IRC support chan: #opnfv-testperf
+
+.. _opnfvmain: http://www.opnfv.org
+.. _opnfvfunctest: https://wiki.opnfv.org/opnfv_functional_testing
+.. _`OpenRC`: http://docs.openstack.org/user-guide/common/cli_set_environment_variables_using_openstack_rc.html
+.. _`Rally installation procedure`: https://rally.readthedocs.org/en/latest/tutorial/step_0_installation.html
+.. _`config_test.py` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.py
+.. _`config_functest.yaml` : https://git.opnfv.org/cgit/functest/tree/testcases/config_functest.yaml