aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing/user/userguide/runfunctest.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/userguide/runfunctest.rst')
-rw-r--r--docs/testing/user/userguide/runfunctest.rst466
1 files changed, 123 insertions, 343 deletions
diff --git a/docs/testing/user/userguide/runfunctest.rst b/docs/testing/user/userguide/runfunctest.rst
index 83e603b3..db85c18f 100644
--- a/docs/testing/user/userguide/runfunctest.rst
+++ b/docs/testing/user/userguide/runfunctest.rst
@@ -1,342 +1,9 @@
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
-Executing the functest suites (Ubuntu)
-======================================
-
-Manual testing
---------------
-
-This section assumes the following:
- * The Functest Docker container is running
- * The docker prompt is shown
- * The Functest environment is ready (Functest CLI command 'functest env prepare'
- has been executed)
-
-If any of the above steps are missing please refer to the Functest Config Guide
-as they are a prerequisite and all the commands explained in this section **must** be
-performed **inside the container**.
-
-The Functest CLI offers two commands (functest tier ...) and (functest testcase ... )
-for the execution of Test Tiers or Test Cases::
-
- root@22e436918db0:~/repos/functest/ci# functest tier --help
- Usage: functest tier [OPTIONS] COMMAND [ARGS]...
-
- Options:
- -h, --help Show this message and exit.
-
- Commands:
- get-tests Prints the tests in a tier.
- list Lists the available tiers.
- run Executes all the tests within a tier.
- show Shows information about a tier.
- root@22e436918db0:~/repos/functest/ci# functest testcase --help
-
- Usage: functest testcase [OPTIONS] COMMAND [ARGS]...
-
- Options:
- -h, --help Show this message and exit.
-
- Commands:
- list Lists the available testcases.
- run Executes a test case.
- show Shows information about a test case.
-
-More details on the existing Tiers and Test Cases can be seen with the 'list'
-command::
-
- root@22e436918db0:~/repos/functest/ci# functest tier list
- - 0. healthcheck:
- ['connection_check', 'api_check', 'snaps_health_check',]
- - 1. smoke:
- ['vping_ssh', 'vping_userdata', 'tempest_smoke_serial', 'odl', 'rally_sanity', 'refstack_defcore', 'snaps_smoke']
- - 2. features:
- ['doctor', 'domino', 'promise', security_scan']
- - 3. components:
- ['tempest_full_parallel', 'rally_full']
- - 4. vnf:
- ['cloudify_ims', 'orchestra_ims', 'vyos_vrouter']
-
- and
-
- root@22e436918db0:~/repos/functest/ci# functest testcase list
- api_check
- connection_check
- snaps_health_check
- vping_ssh
- vping_userdata
- snaps_smoke
- refstack_defcore
- tempest_smoke_serial
- rally_sanity
- odl
- tempest_full_parallel
- rally_full
- vyos_vrouter
-Note the list of test cases depend on the installer and the scenario.
-
-More specific details on specific Tiers or Test Cases can be seen wih the
-'show' command::
-
- root@22e436918db0:~/repos/functest/ci# functest tier show smoke
- +======================================================================+
- | Tier: smoke |
- +======================================================================+
- | Order: 1 |
- | CI Loop: (daily)|(weekly) |
- | Description: |
- | Set of basic Functional tests to validate the OpenStack |
- | deployment. |
- | Test cases: |
- | - vping_ssh |
- | - vping_userdata |
- | - tempest_smoke_serial |
- | - rally_sanity |
- | |
- +----------------------------------------------------------------------+
-
- and
-
- root@22e436918db0:~/repos/functest/ci# functest testcase show tempest_smoke_serial
- +======================================================================+
- | Testcase: tempest_smoke_serial |
- +======================================================================+
- | Description: |
- | This test case runs the smoke subset of the OpenStack Tempest |
- | suite. The list of test cases is generated by Tempest |
- | automatically and depends on the parameters of the OpenStack |
- | deplopyment. |
- | Dependencies: |
- | - Installer: |
- | - Scenario : |
- | |
- +----------------------------------------------------------------------+
-
-
-To execute a Test Tier or Test Case, the 'run' command is used::
-
- root@22e436918db0:~/repos/functest/ci# functest tier run healthcheck
-
- 2017-08-16 12:35:51,799 - functest.ci.run_tests - INFO - ############################################
- 2017-08-16 12:35:51,799 - functest.ci.run_tests - INFO - Running tier 'healthcheck'
- 2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ############################################
- 2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO -
- 2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - Running test case 'connection_check'...
- 2017-08-16 12:35:51,800 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:36:00,278 - functest.core.testcase - INFO - The results were successfully pushed to DB
- 2017-08-16 12:36:00,279 - functest.ci.run_tests - INFO - Test result:
- +--------------------------+------------------+------------------+----------------+
- | TEST CASE | PROJECT | DURATION | RESULT |
- +--------------------------+------------------+------------------+----------------+
- | connection_check | functest | 00:06 | PASS |
- +--------------------------+------------------+------------------+----------------+
- 2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO -
- 2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - Running test case 'api_check'...
- 2017-08-16 12:36:00,281 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:41:04,088 - functest.core.testcase - INFO - The results were successfully pushed to DB
- 2017-08-16 12:41:04,088 - functest.ci.run_tests - INFO - Test result:
- +-------------------+------------------+------------------+----------------+
- | TEST CASE | PROJECT | DURATION | RESULT |
- +-------------------+------------------+------------------+----------------+
- | api_check | functest | 05:03 | PASS |
- +-------------------+------------------+------------------+----------------+
- 2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO -
- 2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - Running test case 'snaps_health_check'...
- 2017-08-16 12:41:04,092 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:41:39,817 - functest.core.testcase - INFO - The results were successfully pushed to DB
- 2017-08-16 12:41:39,818 - functest.ci.run_tests - INFO - Test result:
- +----------------------------+------------------+------------------+----------------+
- | TEST CASE | PROJECT | DURATION | RESULT |
- +----------------------------+------------------+------------------+----------------+
- | snaps_health_check | functest | 00:35 | PASS |
- +----------------------------+------------------+------------------+----------------+
-
- and
-
- root@22e436918db0:~/repos/functest/ci# functest testcase run vping_ssh
- 2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - Running test case 'vping_ssh'...
- 2017-08-16 12:41:39,821 - functest.ci.run_tests - INFO - ============================================
- 2017-08-16 12:42:49,861 - functest.core.testcase - INFO - The results were successfully pushed to DB
- 2017-08-16 12:42:49,861 - functest.ci.run_tests - INFO - Test result:
- +-------------------+------------------+------------------+----------------+
- | TEST CASE | PROJECT | DURATION | RESULT |
- +-------------------+------------------+------------------+----------------+
- | vping_ssh | functest | 00:47 | PASS |
- +-------------------+------------------+------------------+----------------+
- :
- :
- etc.
-
-To list the test cases which are part of a specific Test Tier, the 'get-tests'
-command is used with 'functest tier'::
-
- root@22e436918db0:~/repos/functest/ci# functest tier get-tests healthcheck
- Test cases in tier 'healthcheck':
- ['connection_check', 'api_check', 'snaps_health_check']
-
-
-Please note that for some scenarios some test cases might not be launched.
-For example, the last example displayed only the 'odl' testcase for the given
-environment. In this particular system the deployment does not support the 'ocl' SDN
-Controller Test Case; for example.
-
-**Important** If you use the command 'functest tier run <tier_name>', then the
-Functest CLI utility will call **all valid Test Cases**, which belong to the
-specified Test Tier, as relevant to scenarios deployed to the SUT environment.
-Thus, the Functest CLI utility calculates automatically which tests can be
-executed and which cannot, given the environment variable **DEPLOY_SCENARIO**,
-which is passed in to the Functest docker container.
-
-Currently, the Functest CLI command 'functest testcase run <testcase_name>', supports
-two possibilities::
-
- * Run a single Test Case, specified by a valid choice of <testcase_name>
- * Run ALL test Test Cases (for all Tiers) by specifying <testcase_name> = 'all'
-
-Functest includes a cleaning mechanism in order to remove all the OpenStack
-resources except those present before running any test. The script
-*$REPOS_DIR/functest/functest/utils/openstack_snapshot.py* is called once when setting up
-the Functest environment (i.e. CLI command 'functest env prepare') to snapshot
-all the OpenStack resources (images, networks, volumes, security groups, tenants,
-users) so that an eventual cleanup does not remove any of these defaults.
-
-The script **openstack_clean.py** which is located in
-*$REPOS_DIR/functest/functest/utils/* is in charge of cleaning the OpenStack resources
-that are not specified in the defaults file generated previously which is stored in
-*/home/opnfv/functest/conf/openstack_snapshot.yaml* in the Functest docker container.
-
-It is important to mention that if there are new OpenStack resources created
-manually after the snapshot done before running the tests, they will be removed,
-unless you use the special method of invoking the test case with specific
-suppression of clean up. (See the `Troubleshooting`_ section).
-
-The reason to include this cleanup meachanism in Functest is because some
-test suites create a lot of resources (users, tenants, networks, volumes etc.)
-that are not always properly cleaned, so this function has been set to keep the
-system as clean as it was before a full Functest execution.
-
-Although the Functest CLI provides an easy way to run any test, it is possible to
-do a direct call to the desired test script. For example:
-
- python $REPOS_DIR/functest/functest/opnfv_tests/openstack/vping/vping_ssh.py
-
-
-Automated testing
------------------
-
-As mentioned previously, the Functest Docker container preparation as well as
-invocation of Test Cases can be called within the container from the Jenkins CI
-system. There are 3 jobs that automate the whole process. The first job runs all
-the tests referenced in the daily loop (i.e. that must been run daily), the second
-job runs the tests referenced in the weekly loop (usually long duration tests run
-once a week maximum) and the third job allows testing test suite by test suite specifying
-the test suite name. The user may also use either of these Jenkins jobs to execute
-the desired test suites.
-
-One of the most challenging task in the Danube release consists
-in dealing with lots of scenarios and installers. Thus, when the tests are
-automatically started from CI, a basic algorithm has been created in order to
-detect whether a given test is runnable or not on the given scenario.
-Some Functest test suites cannot be systematically run (e.g. ODL suite can not
-be run on an ONOS scenario). The daily/weekly notion has been introduces in
-Colorado in order to save CI time and avoid running systematically
-long duration tests. It was not used in Colorado due to CI resource shortage.
-The mechanism remains however as part of the CI evolution.
-
-CI provides some useful information passed to the container as environment
-variables:
-
- * Installer (apex|compass|fuel|joid), stored in INSTALLER_TYPE
- * Installer IP of the engine or VM running the actual deployment, stored in INSTALLER_IP
- * The scenario [controller]-[feature]-[mode], stored in DEPLOY_SCENARIO with
-
- * controller = (odl|ocl|nosdn)
- * feature = (ovs(dpdk)|kvm|sfc|bgpvpn|ovs_dpdk_bar)
- * mode = (ha|noha)
-
-The constraints per test case are defined in the Functest configuration file
-*/usr/local/lib/python2.7/dist-packages/functest/ci/testcases.yaml*::
-
- tiers:
- -
- name: smoke
- order: 1
- ci_loop: '(daily)|(weekly)'
- description : >-
- Set of basic Functional tests to validate the OpenStack deployment.
- testcases:
- -
- name: vping_ssh
- criteria: 'status == "PASS"'
- blocking: true
- description: >-
- This test case verifies: 1) SSH to an instance using floating
- IPs over the public network. 2) Connectivity between 2 instances
- over a private network.
- dependencies:
- installer: ''
- scenario: '^((?!bgpvpn|odl_l3).)*$'
- run:
- module: 'functest.opnfv_tests.openstack.vping.vping_ssh'
- class: 'VPingSSH'
- ....
-
-We may distinguish 2 levels in the test case description:
- * Tier level
- * Test case level
-
-At the tier level, we define the following parameters:
-
- * ci_loop: indicate if in automated mode, the test case must be run in dail and/or weekly jobs
- * description: a high level view of the test case
-
-For a given test case we defined:
- * the name of the test case
- * the criteria (experimental): a criteria used to declare the test case as PASS or FAIL
- * blocking: if set to true, if the test is failed, the execution of the following tests is canceled
- * the description of the test case
- * the dependencies: a combination of 2 regex on the scenario and the installer name
- * run: In Danube we introduced the notion of abstract class in order to harmonize the way to run internal, feature or vnf tests
-
-For further details on abstraction classes, see developper guide.
-
-Additional parameters have been added in the desription in the Database.
-The target is to use the configuration stored in the Database and consider the
-local file as backup if the Database is not reachable.
-The additional fields related to a test case are:
- * trust: we introduced this notion to put in place a mechanism of scenario promotion.
- * Version: it indicates since which version you can run this test
- * domains: the main domain covered by the test suite
- * tags: a list of tags related to the test suite
-
-The order of execution is the one defined in the file if all test cases are selected.
-
-In CI daily job the tests are executed in the following order:
-
- 1) healthcheck (blocking)
- 2) smoke: both vPings are blocking
- 3) Feature project tests cases
-
-In CI weekly job we add 2 tiers:
-
- 4) VNFs (vIMS)
- 5) Components (Rally and Tempest long duration suites)
-
-As explained before, at the end of an automated execution, the OpenStack resources
-might be eventually removed.
-Please note that a system snapshot is taken before any test case execution.
-
-This testcase.yaml file is used for CI, for the CLI and for the automatic reporting.
-
-
-Executing Functest suites (Alpine)
-==================================
+Executing Functest suites
+=========================
As mentioned in the configuration guide `[1]`_, Alpine docker containers have
been introduced in Euphrates.
@@ -362,9 +29,117 @@ You should get::
You can run functest-healcheck, functest-smoke, functest-features,
functest-components and functest-vnf.
-Please note that you may also use the CLI for manual tests using Alpine
-containers.
+The result tables show the results by test case, it can be::
+
+ * PASS
+ * FAIL
+ * SKIP: if the scenario/installer does not support the test case
+
+
+Manual run
+==========
+If you want to run the test step by step, you may add docker option then run the
+different commands within the docker.
+
+Considering the healthcheck example, running functest manaully means::
+
+ sudo docker run -ti --env-file env \
+ -v $(pwd)/openstack.creds:/home/opnfv/functest/conf/openstack.creds \
+ -v $(pwd)/images:/home/opnfv/functest/images \
+ opnfv/functest-healthcheck /bin/bash
+
+The docker prompt shall be returned. Then within the docker run the following
+commands::
+
+ $ source /home/opnfv/functest/conf/openstack.creds
+
+Prepare environment
+-------------------
+Prior to commencing the Functest environment preparation, we can check
+the initial status of the environment. Issue the **functest env status**
+command at the prompt::
+
+ # functest env status
+ # Functest environment is not installed.
+
+To prepare the Functest docker container for test case execution, type::
+
+ # functest env prepare
+ # ...
+ # Functest environment ready to run tests.
+
+you may also type prepare_env instead of functest env prepare.
+
+To list some basic information about an already prepared Functest
+docker container environment, issue the **functest env show** at the
+prompt::
+ bash-4.3# functest env show
+ +------------------------------+---------------------------------+
+ | FUNCTEST ENVIRONMENT | VALUE |
+ +------------------------------+---------------------------------+
+ | STATUS | ready |
+ | SCENARIO | os-nosdn-nofeature-noha |
+ | DEBUG FLAG | false |
+ | BUILD_TAG | None |
+ | INSTALLER | compass |
+ | POD | huawei-pod1 |
+ +------------------------------+---------------------------------+
+
+See configuration guide for details on Functest environnement variables.
+
+Tier
+----
+Each Alpine container provided on the docker hub matches with a tier.
+The following commands are available::
+
+ # functest tier list
+ - 0. healthcheck:
+ ['connection_check', 'api_check', 'snaps_health_check']
+ # functest tier show healthcheck
+ +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+ | TIERS | ORDER | CI LOOP | DESCRIPTION | TESTCASES |
+ +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+ | healthcheck | 0 | (daily)|(weekly) | First tier to be executed to verify the | connection_check api_check |
+ | | | | basic operations in the VIM. | snaps_health_check |
+ +---------------------+---------------+--------------------------+-------------------------------------------------+------------------------------------+
+
+To run all the cases of the tier, type::
+
+ # functest tier run healthcheck
+
+Testcase
+--------
+Testcases can be listed, shown and run though the CLI::
+
+ # functest testcase list
+ connection_check
+ api_check
+ snaps_health_check
+ # functest testcase show api_check
+ +-------------------+--------------------------------------------------+------------------+---------------------------+
+ | TEST CASE | DESCRIPTION | CRITERIA | DEPENDENCY |
+ +-------------------+--------------------------------------------------+------------------+---------------------------+
+ | api_check | This test case verifies the retrieval of | 100 | ^((?!netvirt).)*$ |
+ | | OpenStack clients: Keystone, Glance, | | |
+ | | Neutron and Nova and may perform some | | |
+ | | simple queries. When the config value of | | |
+ | | snaps.use_keystone is True, functest | | |
+ | | must have access to the cloud's private | | |
+ | | network. | | |
+ +-------------------+--------------------------------------------------+------------------+---------------------------+
+ # functest testcase run connection_check
+ ...
+ # functest run all
+
+You can also type run_tests -t all to run all the tests.
+
+Note the list of test cases depend on the installer and the scenario.
+
+Reporting results to the test Database
+======================================
+In OPNFV CI we collect all the results from CI. A test APi shall be available
+as well as a test database `[17]`_.
Functest internal API
=====================
@@ -377,18 +152,23 @@ other test projects.
In Euphrates the main method of the APIs are:
- * Show environment
- * Prepare Environment
* Show credentials
+ * Update openrc file
+ * Show environment
+ * Update hosts info for domain name
+ * Prepare environment
* List all testcases
* Show a testcase
+ * Run a testcase
* List all tiers
* Show a tier
* List all testcases within given tier
+ * Get the result of the specified task
+ * Get the log of the specified task
-The API can be invoked as follows:
- http://<functest_url>:5000/api/v1/functest/envs
+See `[16]`_ to get examples on how to use the API.
-TODO
-.. _`[1]`: http://artifacts.opnfv.org/functest/colorado/docs/configguide/#
+.. _`[1]`: http://docs.opnfv.org/en/latest/submodules/functest/docs/testing/user/configguide/index.html
+.. _`[16]`: https://wiki.opnfv.org/display/functest/Running+test+cases+via+new+Functest+REST+API
+.. _`[17]`: http://docs.opnfv.org/en/latest/testing/testing-dev.html